.\" $OpenBSD: zyd.4,v 1.22 2007/05/24 02:49:57 cnst Exp $ .\" $NetBSD: zyd.4,v 1.1 2007/06/09 11:20:55 kiyohara Exp $ .\" .\" Copyright (c) 1997, 1998, 1999 .\" Bill Paul . All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by Bill Paul. .\" 4. Neither the name of the author nor the names of any co-contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD .\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF .\" THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $FreeBSD$ .\" .Dd May 28, 2007 .Dt ZYD 4 .Os .Sh NAME .Nm zyd .Nd ZyDAS ZD1211/ZD1211B USB IEEE 802.11b/g wireless network device .Sh SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: .Bd -ragged -offset indent .Cd "device ehci" .Cd "device uhci" .Cd "device ohci" .Cd "device usb" .Cd "device zyd" .Cd "device wlan" .Cd "device wlan_amrr" .Ed .Pp Alternatively, to load the driver as a module at boot time, place the following line in .Xr loader.conf 5 : .Bd -literal -offset indent if_zyd_load="YES" .Ed .Sh DESCRIPTION The .Nm driver provides support for wireless network adapters based around the ZyDAS ZD1211 and ZD1211B USB chips. .Pp These are the modes the .Nm driver can operate in: .Bl -tag -width "IBSS-masterXX" .It BSS mode Also known as .Em infrastructure mode, this is used when associating with an access point, through which all traffic passes. This mode is the default. .It monitor mode In this mode the driver is able to receive packets without associating with an access point. This disables the internal receive filter and enables the card to capture packets from networks which it wouldn't normally have access to, or to scan for access points. .El .Pp .Nm supports software WEP. Wired Equivalent Privacy (WEP) is the de facto encryption standard for wireless networks. It can be typically configured in one of three modes: no encryption; 40-bit encryption; or 104-bit encryption. Unfortunately, due to serious weaknesses in WEP protocol it is strongly recommended that it not be used as the sole mechanism to secure wireless communication. WEP is not enabled by default. .Sh HARDWARE The following devices are known to be supported by the .Nm driver: .Pp .Bl -column -compact ".Li Atlantis Land A02-PCM-W54" "Bus" .It Em Card Ta Em Bus .It Li "3COM 3CRUSB10075" Ta USB .It Li "Acer WLAN-G-US1" Ta USB .It Li "Airlink+ AWLL3025" Ta USB .It Li "Airlink 101 AWLL3026" Ta USB .It Li "AOpen 802.11g WL54" Ta USB .It Li "Asus A9T integrated wirless" Ta USB .It Li "Asus WL-159g" Ta USB .It Li "Belkin F5D7050 v.4000" Ta USB .It Li "Billion BiPAC 3011G" Ta USB .It Li "Buffalo WLI-U2-KG54L" Ta USB .It Li "CC&C WL-2203B" Ta USB .It Li "DrayTek Vigor 550" Ta USB .It Li "Edimax EW-7317UG" Ta USB .It Li "Edimax EW-7317LDG" Ta USB .It Li "Fiberline Networks WL-43OU" Ta USB .It Li "iNexQ UR055g" Ta USB .It Li "Linksys WUSBF54G" Ta USB .It Li "Longshine LCS-8131G3" Ta USB .It Li "MSI US54SE" Ta USB .It Li "Philips SNU5600" Ta USB .It Li "Planet WL-U356" Ta USB .It Li "Planex GW-US54GZ" Ta USB .It Li "Planex GW-US54GZL" Ta USB .It Li "Planex GW-US54Mini" Ta USB .It Li "Safecom SWMULZ-5400" Ta USB .It Li "Sagem XG 760A" Ta USB .It Li "Sagem XG 76NA" Ta USB .It Li "Sandberg Wireless G54 USB" Ta USB .It Li "Sitecom WL-113" Ta USB .It Li "SMC SMCWUSB-G" Ta USB .It Li "Sweex wireless USB 54 Mbps" Ta USB .It Li "Tekram/Siemens USB adapter" Ta USB .It Li "Telegent TG54USB" Ta USB .It Li "Trendnet TEW-424UB" Ta USB .It Li "Trendnet TEW-429UB" Ta USB .It Li "TwinMOS G240" Ta USB .It Li "Unicorn WL-54G" Ta USB .It Li "US Robotics 5423" Ta USB .It Li "X-Micro XWL-11GUZX" Ta USB .It Li "Yakumo QuickWLAN USB" Ta USB .It Li "Zonet ZEW2501" Ta USB .It Li "ZyXEL ZyAIR G-220" Ta USB .El .Sh EXAMPLES Join an existing BSS network (i.e., connect to an access point): .Pp .Dl "ifconfig zyd0 inet 192.168.0.20 netmask 0xffffff00" .Pp Join a specific BSS network with network name .Dq Li my_net : .Pp .Dl "ifconfig zyd0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net" .Pp Join a specific BSS network with 40-bit WEP encryption: .Bd -literal -offset indent ifconfig zyd0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \e wepmode on wepkey 0x1234567890 weptxkey 1 .Ed .Pp Join a specific BSS network with 104-bit WEP encryption: .Bd -literal -offset indent ifconfig zyd0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \e wepmode on wepkey 0x01020304050607080910111213 weptxkey 1 .Ed .Sh DIAGNOSTICS .Bl -diag .It "zyd%d: could not load firmware (error=%d)" An error occurred while attempting to upload the firmware to the onboard microcontroller unit. .It "zyd%d: could not send command (error=%s)" An attempt to send a command to the firmware failed. .It "zyd%d: sorry, radio %s is not supported yet" Support for the specified radio chip is not yet implemented in the driver. The device will not attach. .It "zyd%d: device version mismatch: 0x%x (only >= 43.30 supported)" Early revisions of the ZD1211 chipset are not supported by this driver. The device will not attach. .It "zyd%d: device timeout" A frame dispatched to the hardware for transmission did not complete in time. The driver will reset the hardware. This should not happen. .El .Sh SEE ALSO .Xr arp 4 , .Xr intro 4 , .Xr netintro 4 , .Xr usb 4 , .Xr wlan 4 , .Xr wlan_amrr 4 , .Xr ifconfig 8 .Sh AUTHORS .An -nosplit The .Nm driver was written by .An Florian Stoehr Aq ich@florian-stoehr.de , .An Damien Bergamini Aq damien@openbsd.org , and .An Jonathan Gray Aq jsg@openbsd.org . .Sh CAVEATS The .Nm driver does not support a lot of the functionality available in the hardware. More work is required to properly support the IBSS and power management features. .\" $OpenBSD: zyd.4,v 1.22 2007/05/24 02:49:57 cnst Exp $ .\" $NetBSD: zyd.4,v 1.1 2007/06/09 11:20:55 kiyohara Exp $ .\" .\" Copyright (c) 1997, 1998, 1999 .\" Bill Paul . All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by Bill Paul. .\" 4. Neither the name of the author nor the names of any co-contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD .\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF .\" THE POSSIBILITY OF SUCH DAMAGE. .\" .Dd May 28, 2007 .Dt ZYD 4 .Os .Sh NAME .Nm zyd .Nd ZyDAS ZD1211/ZD1211B USB IEEE 802.11b/g wireless network device .Sh SYNOPSIS .Cd "zyd* at uhub? port ?" .Sh DESCRIPTION The .Nm driver provides support for wireless network adapters based around the ZyDAS ZD1211 and ZD1211B USB chips. .Pp These are the modes the .Nm driver can operate in: .Bl -tag -width "IBSS-masterXX" .It BSS mode Also known as .Em infrastructure mode, this is used when associating with an access point, through which all traffic passes. This mode is the default. .It monitor mode In this mode the driver is able to receive packets without associating with an access point. This disables the internal receive filter and enables the card to capture packets from networks which it wouldn't normally have access to, or to scan for access points. .El .Pp .Nm supports software WEP. Wired Equivalent Privacy (WEP) is the de facto encryption standard for wireless networks. It can be typically configured in one of three modes: no encryption; 40-bit encryption; or 104-bit encryption. Unfortunately, due to serious weaknesses in WEP protocol it is strongly recommended that it not be used as the sole mechanism to secure wireless communication. WEP is not enabled by default. .Sh HARDWARE The following devices are known to be supported by the .Nm driver: .Pp .Bl -tag -width Ds -offset indent -compact .It 3COM 3CRUSB10075 .It Acer WLAN-G-US1 .It Airlink+ AWLL3025 .It Airlink 101 AWLL3026 .It AOpen 802.11g WL54 .It Asus A9T integrated wirless .It Asus WL-159g .It Belkin F5D7050 v.4000 .It Billion BiPAC 3011G .It Buffalo WLI-U2-KG54L .It CC&C WL-2203B .It DrayTek Vigor 550 .It Edimax EW-7317UG .It Edimax EW-7317LDG .It Fiberline Networks WL-43OU .It iNexQ UR055g .It Linksys WUSBF54G .It Longshine LCS-8131G3 .It MSI US54SE .It Philips SNU5600 .It Planet WL-U356 .It Planex GW-US54GZ .It Planex GW-US54GZL .It Planex GW-US54Mini .It Safecom SWMULZ-5400 .It Sagem XG 760A .It Sagem XG 76NA .It Sandberg Wireless G54 USB .It Sitecom WL-113 .It SMC SMCWUSB-G .It Sweex wireless USB 54 Mbps .It Tekram/Siemens USB adapter .It Telegent TG54USB .It Trendnet TEW-424UB .It Trendnet TEW-429UB .It TwinMOS G240 .It Unicorn WL-54G .It US Robotics 5423 .It X-Micro XWL-11GUZX .It Yakumo QuickWLAN USB .It Zonet ZEW2501 .It ZyXEL ZyAIR G-220 .El .Sh EXAMPLES The following examples configures zyd0 to join whatever network is available on boot, using WEP key .Dq 0x1deadbeef1 , channel 11: .Bd -literal -offset indent inet 192.168.1.1 netmask 255.255.255.0 wepkey 0x1deadbeef1 channel 11 .Ed .Pp Configure zyd0 for WEP, using hex key .Dq 0x1deadbeef1 : .Bd -literal -offset indent # ifconfig zyd0 wepkey 0x1deadbeef1 .Ed .Pp Join an existing BSS network, .Dq my_net : .Bd -literal -offset indent # ifconfig zyd0 192.168.0.2 netmask 0xffffff00 ssid my_net .Ed .Sh DIAGNOSTICS .Bl -diag .It "zyd%d: could not load firmware (error=%d)" An error occurred while attempting to upload the firmware to the onboard microcontroller unit. .It "zyd%d: could not send command (error=%s)" An attempt to send a command to the firmware failed. .It "zyd%d: sorry, radio %s is not supported yet" Support for the specified radio chip is not yet implemented in the driver. The device will not attach. .It "zyd%d: device version mismatch: 0x%x (only >= 43.30 supported)" Early revisions of the ZD1211 chipset are not supported by this driver. The device will not attach. .It "zyd%d: device timeout" A frame dispatched to the hardware for transmission did not complete in time. The driver will reset the hardware. This should not happen. .El .Sh SEE ALSO .Xr arp 4 , .Xr intro 4 , .Xr netintro 4 , .Xr usb 4 , .Xr wlan 4 , .Xr wlan_amrr 4 , .Xr ifconfig 8 .Sh AUTHORS .An -nosplit The .Nm driver was written by .An Florian Stoehr Aq ich@florian-stoehr.de , .An Damien Bergamini Aq damien@openbsd.org , and .An Jonathan Gray Aq jsg@openbsd.org . .Sh CAVEATS The .Nm driver does not support a lot of the functionality available in the hardware. More work is required to properly support the IBSS and power management features.