.\" Copyright (c) 2017 Broadcom. All rights reserved. .\" The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions are met: .\" .\" 1. Redistributions of source code must retain the above copyright notice, .\" this list of conditions and the following disclaimer. .\" .\" 2. Redistributions in binary form must reproduce the above copyright notice, .\" this list of conditions and the following disclaimer in the documentation .\" and/or other materials provided with the distribution. .\" .\" 3. Neither the name of the copyright holder nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" .\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE .\" LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" .\" $FreeBSD$ .\" .Dd December 29, 2021 .Dt OCS_FC 4 .Os .Sh NAME .Nm ocs_fc .Nd "Device driver for Emulex Fibre Channel Host Adapters" .Sh SYNOPSIS To compile this driver into the kernel, add this line to the kernel configuration file: .Bd -ragged -offset indent .Cd "device ocs_fc" .Ed .Pp To load the driver as a module at boot, add this line to .Xr loader.conf 5 : .Bd -literal -offset indent ocs_fc_load="YES" .Ed .Sh DESCRIPTION The .Nm driver provides access to Fibre Channel SCSI devices. .Pp The .Nm driver supports initiator and target modes. Support is available for Arbitrated loops, Point-to-Point, and Fabric connections. FC-Tape is highly recommended for connections to tape drives that support it. FC-Tape includes four elements from the T-10 FCP-4 specification: .Bl -bullet -offset indent .It Precise Delivery of Commands .It Confirmed Completion of FCP I/O Operations .It Retransmission of Unsuccessfully Transmitted IUs .It Task Retry Identification .El .Pp Together these features allow for link level error recovery with tape devices. Without link level error recovery, an initiator cannot, for instance, tell whether a tape write command that has timed out resulted in all, part, or none of the data going to the tape drive. FC-Tape is automatically enabled when both the controller and target support it. .Sh HARDWARE The .Nm driver supports these Fibre Channel adapters: .Bl -tag -width xxxxxx -offset indent .It Emulex 16/8G FC GEN 5 HBAS .Bd -literal -offset indent LPe15004 FC Host Bus Adapters LPe160XX FC Host Bus Adapters .Ed .It Emulex 32/16G FC GEN 6 HBAS .Bd -literal -offset indent LPe3100X FC Host Bus Adapters LPe3200X FC Host Bus Adapters .Ed .It Emulex 64/32G FC GEN 7 HBAS .Bd -literal -offset indent LPe3500X FC Host Bus Adapters .Ed .El .Sh UPDATING FIRMWARE Adapter firmware updates are persistent. .Pp Firmware can be updated by following these steps: .Bl -enum .It Copy this code to a .Pa Makefile : .Bd -literal -offset indent KMOD=ocsflash FIRMWS=imagename.grp:ocsflash \&.include .Ed .It Replace .Pa imagename with the name of the GRP file. .It Copy the .Pa Makefile and GRP file to a local directory .It Execute .Cm make and copy the generated .Pa ocsflash.ko file to .Pa /lib/modules .It .Cm sysctl dev.ocs_fc..fw_upgrade=ocsflash .It Check kernel messages regarding status of the operation .It Reboot the machine .El .Sh BOOT OPTIONS Options are controlled by setting values in .Pa /boot/device.hints . .Pp They are: .Bl -tag -width indent .It Va hint.ocs_fc.N.initiator Enable initiator functionality. Default 1 (enabled), 0 to disable. .It Va hint.ocs_fc.N.target Enable target functionality. Default 1 (enabled), 0 to disable. .It Va hint.ocs_fc.N.topology Topology: 0 for Auto, 1 for NPort only, 2 for Loop only. .It Va hint.ocs_fc.N.speed Link speed in megabits per second. Possible values include: 0 Auto-speed negotiation (default), 4000 (4GFC), 8000 (8GFC), 16000 (16GFC). .El .Sh SYSCTL OPTIONS .Bl -tag -width indent .It Va dev.ocs_fc.N.port_state Port state (read/write). Valid values are .Li online and .Li offline . .It Va dev.ocs_fc.N.wwpn World Wide Port Name (read/write). .It Va dev.ocs_fc.N.wwnn World Wide Node Name (read/write). .It Va dev.ocs_fc.N.fwrev Firmware revision (read-only). .It Va dev.ocs_fc.N.sn Adapter serial number (read-only). .It Va dev.ocs_fc.N.configured_speed Configured Port Speed (read/write). Valid values are: 0 Auto-speed negotiation (default), 4000 (4GFC), 8000 (8GFC), 16000 (16GFC). .It Va dev.ocs_fc.N.configured_topology Configured Port Topology (read/write). Valid values are: 0-Auto; 1-NPort; 2-Loop. .It Va dev.ocs_fc.N.current_speed Current Port Speed (read-only). .It Va dev.ocs_fc.N.current_topology Current Port Topology (read-only). .El .Sh SUPPORT For general information and support, go to the Broadcom website at: .Pa http://www.broadcom.com/ or E-Mail at .Pa ocs-driver-team.pdl@broadcom.com . .Sh SEE ALSO .Xr ifconfig 8 .Sh AUTHORS .An -nosplit The .Nm driver was written by .An Broadcom .