.\" Copyright (c) 2015 EMC / Isilon Storage Division
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd December 14, 2015
.Dt IOAT 4
.Os
.Sh NAME
.Nm I/OAT
.Nd Intel I/O Acceleration Technology
.Sh SYNOPSIS
To compile this driver into your kernel,
place the following line in your kernel configuration file:
.Bd -ragged -offset indent
.Cd "device ioat"
.Ed
.Pp
Or, to load the driver as a module at boot, place the following line in
.Xr loader.conf 5 :
.Bd -literal -offset indent
ioat_load="YES"
.Ed
.Pp
In
.Xr loader.conf 5 :
.Pp
.Cd hw.ioat.force_legacy_interrupts=0
.Pp
In
.Xr loader.conf 5 or
.Xr sysctl.conf 5 :
.Pp
.Cd hw.ioat.enable_ioat_test=0
.Cd hw.ioat.debug_level=0
(only critical errors; maximum of 3)
.Pp
.Ft typedef void
.Fn (*bus_dmaengine_callback_t) "void *arg" "int error"
.Pp
.Ft bus_dmaengine_t
.Fn ioat_get_dmaengine "uint32_t channel_index"
.Ft void
.Fn ioat_put_dmaengine "bus_dmaengine_t dmaengine"
.Ft int
.Fn ioat_set_interrupt_coalesce "bus_dmaengine_t dmaengine" "uint16_t delay"
.Ft uint16_t
.Fn ioat_get_max_coalesce_period "bus_dmaengine_t dmaengine"
.Ft void
.Fn ioat_acquire "bus_dmaengine_t dmaengine"
.Ft void
.Fn ioat_release "bus_dmaengine_t dmaengine"
.Ft struct bus_dmadesc *
.Fo ioat_copy
.Fa "bus_dmaengine_t dmaengine"
.Fa "bus_addr_t dst"
.Fa "bus_addr_t src"
.Fa "bus_size_t len"
.Fa "bus_dmaengine_callback_t callback_fn"
.Fa "void *callback_arg"
.Fa "uint32_t flags"
.Fc
.Ft struct bus_dmadesc *
.Fo ioat_copy_8k_aligned
.Fa "bus_dmaengine_t dmaengine"
.Fa "bus_addr_t dst1"
.Fa "bus_addr_t dst2"
.Fa "bus_addr_t src1"
.Fa "bus_addr_t src2"
.Fa "bus_dmaengine_callback_t callback_fn"
.Fa "void *callback_arg"
.Fa "uint32_t flags"
.Fc
.Ft struct bus_dmadesc *
.Fo ioat_blockfill
.Fa "bus_dmaengine_t dmaengine"
.Fa "bus_addr_t dst"
.Fa "uint64_t fillpattern"
.Fa "bus_size_t len"
.Fa "bus_dmaengine_callback_t callback_fn"
.Fa "void *callback_arg"
.Fa "uint32_t flags"
.Fc
.Ft struct bus_dmadesc *
.Fo ioat_null
.Fa "bus_dmaengine_t dmaengine"
.Fa "bus_dmaengine_callback_t callback_fn"
.Fa "void *callback_arg"
.Fa "uint32_t flags"
.Fc
.Sh DESCRIPTION
The
.Nm
driver provides a kernel API to a variety of DMA engines on some Intel server
platforms.
.Pp
There is a number of DMA channels per CPU package.
(Typically 4 or 8.)
Each may be used independently.
Operations on a single channel proceed sequentially.
.Pp
Blockfill operations can be used to write a 64-bit pattern to memory.
.Pp
Copy operations can be used to offload memory copies to the DMA engines.
.Pp
Null operations do nothing, but may be used to test the interrupt and callback
mechanism.
.Pp
All operations can optionally trigger an interrupt at completion with the
.Ar DMA_EN_INT
flag.
For example, a user might submit multiple operations to the same channel and
only enable an interrupt and callback for the last operation.
.Pp
The hardware can delay and coalesce interrupts on a given channel for a
configurable period of time, in microseconds.
This may be desired to reduce the processing and interrupt overhead per
descriptor, especially for workflows consisting of many small operations.
Software can control this on a per-channel basis with the
.Fn ioat_set_interrupt_coalesce
API.
The
.Fn ioat_get_max_coalesce_period
API can be used to determine the maximum coalescing period supported by the
hardware, in microseconds.
Current platforms support up to a 16.383 millisecond coalescing period.
Optimal configuration will vary by workflow and desired operation latency.
.Pp
All operations are safe to use in a non-blocking context with the
.Ar DMA_NO_WAIT
flag.
(Of course, allocations may fail and operations requested with
.Ar DMA_NO_WAIT
may return NULL.)
.Pp
All operations, as well as
.Fn ioat_get_dmaengine ,
can return NULL in special circumstances.
For example, if the
.Nm
driver is being unloaded, or the administrator has induced a hardware reset, or
a usage error has resulted in a hardware error state that needs to be recovered
from.
.Pp
It is invalid to attempt to submit new DMA operations in a
.Fa bus_dmaengine_callback_t
context.
.Sh USAGE
A typical user will lookup the DMA engine object for a given channel with
.Fn ioat_get_dmaengine .
When the user wants to offload a copy, they will first
.Fn ioat_acquire
the
.Ar bus_dmaengine_t
object for exclusive access to enqueue operations on that channel.
Then, they will submit one or more operations using
.Fn ioat_blockfill ,
.Fn ioat_copy ,
or
.Fn ioat_null .
After queuing one or more individual DMA operations, they will
.Fn ioat_release
the
.Ar bus_dmaengine_t
to drop their exclusive access to the channel.
The routine they provided for the
.Fa callback_fn
argument will be invoked with the provided
.Fa callback_arg
when the operation is complete.
When they are finished with the
.Ar bus_dmaengine_t ,
the user should
.Fn ioat_put_dmaengine .
.Pp
Users MUST NOT block between
.Fn ioat_acquire
and
.Fn ioat_release .
Users SHOULD NOT hold
.Ar bus_dmaengine_t
references for a very long time to enable fault recovery and kernel module
unload.
.Pp
For an example of usage, see
.Pa src/sys/dev/ioat/ioat_test.c .
.Sh FILES
.Bl -tag
.It Pa /dev/ioat_test
test device for
.Xr ioatcontrol 8
.El
.Sh SEE ALSO
.Xr ioatcontrol 8
.Sh HISTORY
The
.Nm
driver first appeared in
.Fx 11.0 .
.Sh AUTHORS
The
.Nm
driver was developed by
.An \&Jim Harris Aq Mt jimharris@FreeBSD.org ,
.An \&Carl Delsey Aq Mt carl.r.delsey@intel.com ,
and
.An \&Conrad Meyer Aq Mt cem@FreeBSD.org .
This manual page was written by
.An \&Conrad Meyer Aq Mt cem@FreeBSD.org .
.Sh CAVEATS
Copy operation takes bus addresses as parameters, not virtual addresses.
.Pp
Buffers for individual copy operations must be physically contiguous.
.Pp
Copies larger than max transfer size (1MB, but may vary by hardware) are not
supported.
Future versions will likely support this by breaking up the transfer into
smaller sizes.
.Sh BUGS
The
.Nm
driver only supports blockfill, copy, and null operations at this time.
The driver does not yet support advanced DMA modes, such as XOR, that some
I/OAT devices support.