/*- * Copyright (c) 2002-2003,2010 Luigi Rizzo * Copyright (c) 1996 Alex Nash, Paul Traina, Poul-Henning Kamp * Copyright (c) 1994 Ugen J.S.Antsilevich * * Idea and grammar partially left from: * Copyright (c) 1993 Daniel Boulet * * Redistribution and use in source forms, with and without modification, * are permitted provided that this entire comment appears intact. * * Redistribution in binary form may occur without any restrictions. * Obviously, it would be nice if you gave credit where credit is due * but requiring it would be too onerous. * * This software is provided ``AS IS'' without any warranties of any kind. * * Command line interface for IP firewall facility */ #include #include #include #include #include #include #include #include #include #include #include #include "ipfw2.h" static void help(void) { if (is_ipfw()) { fprintf(stderr, "ipfw syntax summary (but please do read the ipfw(8) manpage):\n\n" "\tipfw [-abcdefhnNqStTv] \n\n" "where is one of the following:\n\n" "add [num] [set N] [prob x] RULE-BODY\n" "{pipe|queue} N config PIPE-BODY\n" "[pipe|queue] {zero|delete|show} [N{,N}]\n" "nat N config {ip IPADDR|if IFNAME|log|deny_in|same_ports|unreg_only|unreg_cgn|udp_eim|\n" " reset|reverse|proxy_only|redirect_addr linkspec|\n" " redirect_port linkspec|redirect_proto linkspec|\n" " port_range lower-upper}\n" "set [disable N... enable N...] | move [rule] X to Y | swap X Y | show\n" "set N {show|list|zero|resetlog|delete} [N{,N}] | flush\n" "table N {add ip[/bits] [value] | delete ip[/bits] | flush | list}\n" "table all {flush | list}\n" "\n" "RULE-BODY: check-state [PARAMS] | ACTION [PARAMS] ADDR [OPTION_LIST]\n" "ACTION: check-state | allow | count | deny | unreach{,6} CODE |\n" " skipto N | {divert|tee} PORT | forward ADDR |\n" " pipe N | queue N | nat N | setfib FIB | reass\n" "PARAMS: [log [logamount LOGLIMIT]] [altq QUEUE_NAME]\n" "ADDR: [ MAC dst src ether_type ] \n" " [ ip from IPADDR [ PORT ] to IPADDR [ PORTLIST ] ]\n" " [ ipv6|ip6 from IP6ADDR [ PORT ] to IP6ADDR [ PORTLIST ] ]\n" "IPADDR: [not] { any | me | ip/bits{x,y,z} | table(t[,v]) | IPLIST }\n" "IP6ADDR: [not] { any | me | me6 | ip6/bits | IP6LIST }\n" "IP6LIST: { ip6 | ip6/bits }[,IP6LIST]\n" "IPLIST: { ip | ip/bits | ip:mask }[,IPLIST]\n" "OPTION_LIST: OPTION [OPTION_LIST]\n" "OPTION: bridged | diverted | diverted-loopback | diverted-output |\n" " {dst-ip|src-ip} IPADDR | {dst-ip6|src-ip6|dst-ipv6|src-ipv6} IP6ADDR |\n" " {dst-port|src-port} LIST |\n" " estab | frag | {gid|uid} N | icmptypes LIST | in | out | ipid LIST |\n" " iplen LIST | ipoptions SPEC | ipprecedence | ipsec | iptos SPEC |\n" " ipttl LIST | ipversion VER | keep-state | layer2 | limit ... |\n" " icmp6types LIST | ext6hdr LIST | flow-id N[,N] | fib FIB |\n" " mac ... | mac-type LIST | proto LIST | {recv|xmit|via} {IF|IPADDR} |\n" " setup | {tcpack|tcpseq|tcpwin} NN | tcpflags SPEC | tcpoptions SPEC |\n" " tcpdatalen LIST | verrevpath | versrcreach | antispoof\n" ); } else { fprintf(stderr, "dnctl syntax summary (but please do read the dnctl(8) manpage):\n\n" "\tdnctl [-hnsv] \n\n" "where is one of the following:\n\n" "[pipe|queue|sched] N config PIPE-BODY\n" "[pipe|queue|sched] {delete|list|show} [N{,N}]\n" "\n" ); } exit(0); } /* * Called with the arguments, including program name because getopt * wants it to be present. * Returns 0 if successful, 1 if empty command, errx() in case of errors. * First thing we do is process parameters creating an argv[] array * which includes the program name and a NULL entry at the end. * If we are called with a single string, we split it on whitespace. * Also, arguments with a trailing ',' are joined to the next one. * The pointers (av[]) and data are in a single chunk of memory. * av[0] points to the original program name, all other entries * point into the allocated chunk. */ static int ipfw_main(int oldac, char **oldav) { int ch, ac; const char *errstr; char **av, **save_av; int do_acct = 0; /* Show packet/byte count */ int try_next = 0; /* set if pipe cmd not found */ int av_size; /* compute the av size */ char *av_p; /* used to build the av list */ #define WHITESP " \t\f\v\n\r" if (oldac < 2) return 1; /* need at least one argument */ if (oldac == 2) { /* * If we are called with one argument, try to split it into * words for subsequent parsing. Spaces after a ',' are * removed by copying the string in-place. */ char *arg = oldav[1]; /* The string is the first arg. */ int l = strlen(arg); int copy = 0; /* 1 if we need to copy, 0 otherwise */ int i, j; for (i = j = 0; i < l; i++) { if (arg[i] == '#') /* comment marker */ break; if (copy) { arg[j++] = arg[i]; copy = !strchr("," WHITESP, arg[i]); } else { copy = !strchr(WHITESP, arg[i]); if (copy) arg[j++] = arg[i]; } } if (!copy && j > 0) /* last char was a 'blank', remove it */ j--; l = j; /* the new argument length */ arg[j++] = '\0'; if (l == 0) /* empty string! */ return 1; /* * First, count number of arguments. Because of the previous * processing, this is just the number of blanks plus 1. */ for (i = 0, ac = 1; i < l; i++) if (strchr(WHITESP, arg[i]) != NULL) ac++; /* * Allocate the argument list structure as a single block * of memory, containing pointers and the argument * strings. We include one entry for the program name * because getopt expects it, and a NULL at the end * to simplify further parsing. */ ac++; /* add 1 for the program name */ av_size = (ac+1) * sizeof(char *) + l + 1; av = safe_calloc(av_size, 1); /* * Init the argument pointer to the end of the array * and copy arguments from arg[] to av[]. For each one, * j is the initial character, i is the one past the end. */ av_p = (char *)&av[ac+1]; for (ac = 1, i = j = 0; i < l; i++) { if (strchr(WHITESP, arg[i]) != NULL || i == l-1) { if (i == l-1) i++; bcopy(arg+j, av_p, i-j); av[ac] = av_p; av_p += i-j; /* the length of the string */ *av_p++ = '\0'; ac++; j = i + 1; } } } else { /* * If an argument ends with ',' join with the next one. */ int first, i, l=0; /* * Allocate the argument list structure as a single block * of memory, containing both pointers and the argument * strings. We include some space for the program name * because getopt expects it. * We add an extra pointer to the end of the array, * to make simpler further parsing. */ for (i=0; i= 2 && !strcmp(av[1], "sysctl")) { char *s; int i; if (ac != 3) { printf( "sysctl emulation usage:\n" " ipfw sysctl name[=value]\n" " ipfw sysctl -a\n"); return 0; } s = strchr(av[2], '='); if (s == NULL) { s = !strcmp(av[2], "-a") ? NULL : av[2]; sysctlbyname(s, NULL, NULL, NULL, 0); } else { /* ipfw sysctl x.y.z=value */ /* assume an INT value, will extend later */ if (s[1] == '\0') { printf("ipfw sysctl: missing value\n\n"); return 0; } *s = '\0'; i = strtol(s+1, NULL, 0); sysctlbyname(av[2], NULL, NULL, &i, sizeof(int)); } return 0; } #endif /* Save arguments for final freeing of memory. */ save_av = av; optind = optreset = 1; /* restart getopt() */ if (is_ipfw()) { while ((ch = getopt(ac, av, "abcdDefhinNp:qs:STtvx")) != -1) switch (ch) { case 'a': do_acct = 1; break; case 'b': g_co.comment_only = 1; g_co.do_compact = 1; break; case 'c': g_co.do_compact = 1; break; case 'd': g_co.do_dynamic = 1; break; case 'D': g_co.do_dynamic = 2; break; case 'e': /* nop for compatibility */ break; case 'f': g_co.do_force = 1; break; case 'h': /* help */ free(save_av); help(); break; /* NOTREACHED */ case 'i': g_co.do_value_as_ip = 1; break; case 'n': g_co.test_only = 1; break; case 'N': g_co.do_resolv = 1; break; case 'p': errx(EX_USAGE, "An absolute pathname must be used " "with -p option."); /* NOTREACHED */ case 'q': g_co.do_quiet = 1; break; case 's': /* sort */ g_co.do_sort = atoi(optarg); break; case 'S': g_co.show_sets = 1; break; case 't': g_co.do_time = TIMESTAMP_STRING; break; case 'T': g_co.do_time = TIMESTAMP_NUMERIC; break; case 'v': /* verbose */ g_co.verbose = 1; break; case 'x': /* debug output */ g_co.debug_only = 1; break; default: free(save_av); return 1; } } else { while ((ch = getopt(ac, av, "hns:v")) != -1) switch (ch) { case 'h': /* help */ free(save_av); help(); break; /* NOTREACHED */ case 'n': g_co.test_only = 1; break; case 's': /* sort */ g_co.do_sort = atoi(optarg); break; case 'v': /* verbose */ g_co.verbose = 1; break; default: free(save_av); return 1; } } ac -= optind; av += optind; NEED1("bad arguments, for usage summary ``ipfw''"); /* * An undocumented behaviour of ipfw1 was to allow rule numbers first, * e.g. "100 add allow ..." instead of "add 100 allow ...". * In case, swap first and second argument to get the normal form. */ if (ac > 1 && isdigit(*av[0])) { char *p = av[0]; av[0] = av[1]; av[1] = p; } /* * Optional: pipe, queue or nat. */ g_co.do_nat = 0; g_co.do_pipe = 0; g_co.use_set = 0; if (is_ipfw() && !strncmp(*av, "nat", strlen(*av))) g_co.do_nat = 1; else if (!strncmp(*av, "pipe", strlen(*av))) g_co.do_pipe = 1; else if (_substrcmp(*av, "queue") == 0) g_co.do_pipe = 2; else if (_substrcmp(*av, "flowset") == 0) g_co.do_pipe = 2; else if (_substrcmp(*av, "sched") == 0) g_co.do_pipe = 3; else if (is_ipfw() && !strncmp(*av, "set", strlen(*av))) { if (ac > 1 && isdigit(av[1][0])) { g_co.use_set = strtonum(av[1], 0, resvd_set_number, &errstr); if (errstr) errx(EX_DATAERR, "invalid set number %s\n", av[1]); ac -= 2; av += 2; g_co.use_set++; } } if (g_co.do_pipe || g_co.do_nat) { ac--; av++; } NEED1("missing command"); /* * For pipes, queues and nats we normally say 'nat|pipe NN config' * but the code is easier to parse as 'nat|pipe config NN' * so we swap the two arguments. */ if ((g_co.do_pipe || g_co.do_nat) && ac > 1 && isdigit(*av[0])) { char *p = av[0]; av[0] = av[1]; av[1] = p; } if (! is_ipfw() && g_co.do_pipe == 0) { help(); } if (g_co.use_set == 0) { if (is_ipfw() && _substrcmp(*av, "add") == 0) ipfw_add(av); else if (g_co.do_nat && _substrcmp(*av, "show") == 0) ipfw_show_nat(ac, av); else if (g_co.do_pipe && _substrcmp(*av, "config") == 0) ipfw_config_pipe(ac, av); else if (g_co.do_nat && _substrcmp(*av, "config") == 0) ipfw_config_nat(ac, av); else if (is_ipfw() && _substrcmp(*av, "set") == 0) ipfw_sets_handler(av); else if (is_ipfw() && _substrcmp(*av, "table") == 0) ipfw_table_handler(ac, av); else if (is_ipfw() && _substrcmp(*av, "enable") == 0) ipfw_sysctl_handler(av, 1); else if (is_ipfw() && _substrcmp(*av, "disable") == 0) ipfw_sysctl_handler(av, 0); else try_next = 1; } if (g_co.use_set || try_next) { if (_substrcmp(*av, "delete") == 0) ipfw_delete(av); else if (is_ipfw() && !strncmp(*av, "nat64clat", strlen(*av))) ipfw_nat64clat_handler(ac, av); else if (is_ipfw() && !strncmp(*av, "nat64stl", strlen(*av))) ipfw_nat64stl_handler(ac, av); else if (is_ipfw() && !strncmp(*av, "nat64lsn", strlen(*av))) ipfw_nat64lsn_handler(ac, av); else if (is_ipfw() && !strncmp(*av, "nptv6", strlen(*av))) ipfw_nptv6_handler(ac, av); else if (_substrcmp(*av, "flush") == 0) ipfw_flush(g_co.do_force); else if (is_ipfw() && _substrcmp(*av, "zero") == 0) ipfw_zero(ac, av, 0 /* IP_FW_ZERO */); else if (is_ipfw() && _substrcmp(*av, "resetlog") == 0) ipfw_zero(ac, av, 1 /* IP_FW_RESETLOG */); else if (_substrcmp(*av, "print") == 0 || _substrcmp(*av, "list") == 0) ipfw_list(ac, av, do_acct); else if (_substrcmp(*av, "show") == 0) ipfw_list(ac, av, 1 /* show counters */); else if (is_ipfw() && _substrcmp(*av, "table") == 0) ipfw_table_handler(ac, av); else if (is_ipfw() && _substrcmp(*av, "internal") == 0) ipfw_internal_handler(ac, av); else errx(EX_USAGE, "bad command `%s'", *av); } /* Free memory allocated in the argument parsing. */ free(save_av); return 0; } static void ipfw_readfile(int ac, char *av[]) { #define MAX_ARGS 32 char buf[4096]; char *progname = av[0]; /* original program name */ const char *cmd = NULL; /* preprocessor name, if any */ const char *filename = av[ac-1]; /* file to read */ int c, lineno=0; FILE *f = NULL; pid_t preproc = 0; if (is_ipfw()) { while ((c = getopt(ac, av, "cfNnp:qS")) != -1) { switch(c) { case 'c': g_co.do_compact = 1; break; case 'f': g_co.do_force = 1; break; case 'N': g_co.do_resolv = 1; break; case 'n': g_co.test_only = 1; break; case 'p': /* * ipfw -p cmd [args] filename * * We are done with getopt(). All arguments * except the filename go to the preprocessor, * so we need to do the following: * - check that a filename is actually present; * - advance av by optind-1 to skip arguments * already processed; * - decrease ac by optind, to remove the args * already processed and the final filename; * - set the last entry in av[] to NULL so * popen() can detect the end of the array; * - set optind=ac to let getopt() terminate. */ if (optind == ac) errx(EX_USAGE, "no filename argument"); cmd = optarg; av[ac-1] = NULL; av += optind - 1; ac -= optind; optind = ac; break; case 'q': g_co.do_quiet = 1; break; case 'S': g_co.show_sets = 1; break; default: errx(EX_USAGE, "bad arguments, for usage" " summary ``ipfw''"); } } } else { while ((c = getopt(ac, av, "nq")) != -1) { switch(c) { case 'n': g_co.test_only = 1; break; case 'q': g_co.do_quiet = 1; break; default: errx(EX_USAGE, "bad arguments, for usage" " summary ``dnctl''"); } } } if (cmd == NULL && ac != optind + 1) errx(EX_USAGE, "extraneous filename arguments %s", av[ac-1]); if ((f = fopen(filename, "r")) == NULL) err(EX_UNAVAILABLE, "fopen: %s", filename); if (cmd != NULL) { /* pipe through preprocessor */ int pipedes[2]; if (pipe(pipedes) == -1) err(EX_OSERR, "cannot create pipe"); preproc = fork(); if (preproc == -1) err(EX_OSERR, "cannot fork"); if (preproc == 0) { /* * Child, will run the preprocessor with the * file on stdin and the pipe on stdout. */ if (dup2(fileno(f), 0) == -1 || dup2(pipedes[1], 1) == -1) err(EX_OSERR, "dup2()"); fclose(f); close(pipedes[1]); close(pipedes[0]); execvp(cmd, av); err(EX_OSERR, "execvp(%s) failed", cmd); } else { /* parent, will reopen f as the pipe */ fclose(f); close(pipedes[1]); if ((f = fdopen(pipedes[0], "r")) == NULL) { int savederrno = errno; (void)kill(preproc, SIGTERM); errno = savederrno; err(EX_OSERR, "fdopen()"); } } } while (fgets(buf, sizeof(buf), f)) { /* read commands */ char linename[20]; char *args[2]; lineno++; snprintf(linename, sizeof(linename), "Line %d", lineno); setprogname(linename); /* XXX */ args[0] = progname; args[1] = buf; ipfw_main(2, args); } fclose(f); if (cmd != NULL) { int status; if (waitpid(preproc, &status, 0) == -1) errx(EX_OSERR, "waitpid()"); if (WIFEXITED(status) && WEXITSTATUS(status) != EX_OK) errx(EX_UNAVAILABLE, "preprocessor exited with status %d", WEXITSTATUS(status)); else if (WIFSIGNALED(status)) errx(EX_UNAVAILABLE, "preprocessor exited with signal %d", WTERMSIG(status)); } } int main(int ac, char *av[]) { #if defined(_WIN32) && defined(TCC) { WSADATA wsaData; int ret=0; unsigned short wVersionRequested = MAKEWORD(2, 2); ret = WSAStartup(wVersionRequested, &wsaData); if (ret != 0) { /* Tell the user that we could not find a usable */ /* Winsock DLL. */ printf("WSAStartup failed with error: %d\n", ret); return 1; } } #endif if (strcmp("dnctl", basename(av[0])) == 0) g_co.prog = cmdline_prog_dnctl; else g_co.prog = cmdline_prog_ipfw; /* * If the last argument is an absolute pathname, interpret it * as a file to be preprocessed. */ if (ac > 1 && av[ac - 1][0] == '/') { if (access(av[ac - 1], R_OK) == 0) ipfw_readfile(ac, av); else err(EX_USAGE, "pathname: %s", av[ac - 1]); } else { if (ipfw_main(ac, av)) { errx(EX_USAGE, "usage: %s [options]\n" "do \"%s -h\" or \"man %s\" for details", av[0], av[0], av[0]); } } return EX_OK; }