/*	$KAME: ip6opt.c,v 1.13 2003/06/06 10:08:20 suz Exp $	*/

/*-
 * SPDX-License-Identifier: BSD-3-Clause
 *
 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the project nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/param.h>
#include <sys/socket.h>

#include <netinet/in.h>
#include <netinet/ip6.h>

#include <string.h>
#include <stdio.h>

static int ip6optlen(u_int8_t *opt, u_int8_t *lim);
static void inet6_insert_padopt(u_char *p, int len);

#ifndef IPV6_2292HOPOPTS
#define	IPV6_2292HOPOPTS	22
#endif
#ifndef IPV6_2292DSTOPTS
#define	IPV6_2292DSTOPTS	23
#endif

#define	is_ipv6_hopopts(x)	\
	((x) == IPV6_HOPOPTS || (x) == IPV6_2292HOPOPTS)
#define	is_ipv6_dstopts(x)	\
	((x) == IPV6_DSTOPTS || (x) == IPV6_2292DSTOPTS)

/*
 * This function returns the number of bytes required to hold an option
 * when it is stored as ancillary data, including the cmsghdr structure
 * at the beginning, and any padding at the end (to make its size a
 * multiple of 8 bytes).  The argument is the size of the structure
 * defining the option, which must include any pad bytes at the
 * beginning (the value y in the alignment term "xn + y"), the type
 * byte, the length byte, and the option data.
 */
int
inet6_option_space(int nbytes)
{
	nbytes += 2;	/* we need space for nxt-hdr and length fields */
	return(CMSG_SPACE((nbytes + 7) & ~7));
}

/*
 * This function is called once per ancillary data object that will
 * contain either Hop-by-Hop or Destination options.  It returns 0 on
 * success or -1 on an error.
 */
int
inet6_option_init(void *bp, struct cmsghdr **cmsgp, int type)
{
	struct cmsghdr *ch = (struct cmsghdr *)bp;

	/* argument validation */
	if (!is_ipv6_hopopts(type) && !is_ipv6_dstopts(type))
		return(-1);

	ch->cmsg_level = IPPROTO_IPV6;
	ch->cmsg_type = type;
	ch->cmsg_len = CMSG_LEN(0);

	*cmsgp = ch;
	return(0);
}

/*
 * This function appends a Hop-by-Hop option or a Destination option
 * into an ancillary data object that has been initialized by
 * inet6_option_init().  This function returns 0 if it succeeds or -1 on
 * an error.
 * multx is the value x in the alignment term "xn + y" described
 * earlier.  It must have a value of 1, 2, 4, or 8.
 * plusy is the value y in the alignment term "xn + y" described
 * earlier.  It must have a value between 0 and 7, inclusive.
 */
int
inet6_option_append(struct cmsghdr *cmsg, const u_int8_t *typep, int multx,
    int plusy)
{
	int padlen, optlen, off;
	u_char *bp = (u_char *)cmsg + cmsg->cmsg_len;
	struct ip6_ext *eh = (struct ip6_ext *)CMSG_DATA(cmsg);

	/* argument validation */
	if (multx != 1 && multx != 2 && multx != 4 && multx != 8)
		return(-1);
	if (plusy < 0 || plusy > 7)
		return(-1);

	/*
	 * If this is the first option, allocate space for the
	 * first 2 bytes(for next header and length fields) of
	 * the option header.
	 */
	if (bp == (u_char *)eh) {
		bp += 2;
		cmsg->cmsg_len += 2;
	}

	/* calculate pad length before the option. */
	off = bp - (u_char *)eh;
	padlen = roundup2(off % multx, multx) - (off % multx);
	padlen += plusy;
	padlen %= multx;	/* keep the pad as short as possible */
	/* insert padding */
	inet6_insert_padopt(bp, padlen);
	cmsg->cmsg_len += padlen;
	bp += padlen;

	/* copy the option */
	if (typep[0] == IP6OPT_PAD1)
		optlen = 1;
	else
		optlen = typep[1] + 2;
	memcpy(bp, typep, optlen);
	bp += optlen;
	cmsg->cmsg_len += optlen;

	/* calculate pad length after the option and insert the padding */
	off = bp - (u_char *)eh;
	padlen = ((off + 7) & ~7) - off;
	inet6_insert_padopt(bp, padlen);
	bp += padlen;
	cmsg->cmsg_len += padlen;

	/* update the length field of the ip6 option header */
	eh->ip6e_len = ((bp - (u_char *)eh) >> 3) - 1;

	return(0);
}

/*
 * This function appends a Hop-by-Hop option or a Destination option
 * into an ancillary data object that has been initialized by
 * inet6_option_init().  This function returns a pointer to the 8-bit
 * option type field that starts the option on success, or NULL on an
 * error.
 * The difference between this function and inet6_option_append() is
 * that the latter copies the contents of a previously built option into
 * the ancillary data object while the current function returns a
 * pointer to the space in the data object where the option's TLV must
 * then be built by the caller.
 * 
 */
u_int8_t *
inet6_option_alloc(struct cmsghdr *cmsg, int datalen, int multx, int plusy)
{
	int padlen, off;
	u_int8_t *bp = (u_char *)cmsg + cmsg->cmsg_len;
	u_int8_t *retval;
	struct ip6_ext *eh = (struct ip6_ext *)CMSG_DATA(cmsg);

	/* argument validation */
	if (multx != 1 && multx != 2 && multx != 4 && multx != 8)
		return(NULL);
	if (plusy < 0 || plusy > 7)
		return(NULL);

	/*
	 * If this is the first option, allocate space for the
	 * first 2 bytes(for next header and length fields) of
	 * the option header.
	 */
	if (bp == (u_char *)eh) {
		bp += 2;
		cmsg->cmsg_len += 2;
	}

	/* calculate pad length before the option. */
	off = bp - (u_char *)eh;
	padlen = roundup2(off % multx, multx) - (off % multx);
	padlen += plusy;
	padlen %= multx;	/* keep the pad as short as possible */
	/* insert padding */
	inet6_insert_padopt(bp, padlen);
	cmsg->cmsg_len += padlen;
	bp += padlen;

	/* keep space to store specified length of data */
	retval = bp;
	bp += datalen;
	cmsg->cmsg_len += datalen;

	/* calculate pad length after the option and insert the padding */
	off = bp - (u_char *)eh;
	padlen = ((off + 7) & ~7) - off;
	inet6_insert_padopt(bp, padlen);
	bp += padlen;
	cmsg->cmsg_len += padlen;

	/* update the length field of the ip6 option header */
	eh->ip6e_len = ((bp - (u_char *)eh) >> 3) - 1;

	return(retval);
}

/*
 * This function processes the next Hop-by-Hop option or Destination
 * option in an ancillary data object.  If another option remains to be
 * processed, the return value of the function is 0 and *tptrp points to
 * the 8-bit option type field (which is followed by the 8-bit option
 * data length, followed by the option data).  If no more options remain
 * to be processed, the return value is -1 and *tptrp is NULL.  If an
 * error occurs, the return value is -1 and *tptrp is not NULL.
 * (RFC 2292, 6.3.5)
 */
int
inet6_option_next(const struct cmsghdr *cmsg, u_int8_t **tptrp)
{
	struct ip6_ext *ip6e;
	int hdrlen, optlen;
	u_int8_t *lim;

	if (cmsg->cmsg_level != IPPROTO_IPV6 ||
	    (!is_ipv6_hopopts(cmsg->cmsg_type) &&
	     !is_ipv6_dstopts(cmsg->cmsg_type)))
		return(-1);

	/* message length validation */
	if (cmsg->cmsg_len < CMSG_SPACE(sizeof(struct ip6_ext)))
		return(-1);
	ip6e = (struct ip6_ext *)CMSG_DATA(cmsg);
	hdrlen = (ip6e->ip6e_len + 1) << 3;
	if (cmsg->cmsg_len < CMSG_SPACE(hdrlen))
		return(-1);

	/*
	 * If the caller does not specify the starting point,
	 * simply return the 1st option.
	 * Otherwise, search the option list for the next option.
	 */
	lim = (u_int8_t *)ip6e + hdrlen;
	if (*tptrp == NULL)
		*tptrp = (u_int8_t *)(ip6e + 1);
	else {
		if ((optlen = ip6optlen(*tptrp, lim)) == 0)
			return(-1);

		*tptrp = *tptrp + optlen;
	}
	if (*tptrp >= lim) {	/* there is no option */
		*tptrp = NULL;
		return(-1);
	}
	/*
	 * Finally, checks if the next option is safely stored in the
	 * cmsg data.
	 */
	if (ip6optlen(*tptrp, lim) == 0)
		return(-1);
	else
		return(0);
}

/*
 * This function is similar to the inet6_option_next() function,
 * except this function lets the caller specify the option type to be
 * searched for, instead of always returning the next option in the
 * ancillary data object.
 * Note: RFC 2292 says the type of tptrp is u_int8_t *, but we think
 *       it's a typo. The variable should be type of u_int8_t **.
 */
int
inet6_option_find(const struct cmsghdr *cmsg, u_int8_t **tptrp, int type)
{
	struct ip6_ext *ip6e;
	int hdrlen, optlen;
	u_int8_t *optp, *lim;

	if (cmsg->cmsg_level != IPPROTO_IPV6 ||
	    (!is_ipv6_hopopts(cmsg->cmsg_type) &&
	     !is_ipv6_dstopts(cmsg->cmsg_type)))
		return(-1);

	/* message length validation */
	if (cmsg->cmsg_len < CMSG_SPACE(sizeof(struct ip6_ext)))
		return(-1);
	ip6e = (struct ip6_ext *)CMSG_DATA(cmsg);
	hdrlen = (ip6e->ip6e_len + 1) << 3;
	if (cmsg->cmsg_len < CMSG_SPACE(hdrlen))
		return(-1);	

	/*
	 * If the caller does not specify the starting point,
	 * search from the beginning of the option list.
	 * Otherwise, search from *the next option* of the specified point.
	 */
	lim = (u_int8_t *)ip6e + hdrlen;
	if (*tptrp == NULL)
		*tptrp = (u_int8_t *)(ip6e + 1);
	else {
		if ((optlen = ip6optlen(*tptrp, lim)) == 0)
			return(-1);

		*tptrp = *tptrp + optlen;
	}
	for (optp = *tptrp; optp < lim; optp += optlen) {
		if (*optp == type) {
			*tptrp = optp;
			return(0);
		}
		if ((optlen = ip6optlen(optp, lim)) == 0)
			return(-1);
	}

	/* search failed */
	*tptrp = NULL;
	return(-1);
}

/*
 * Calculate the length of a given IPv6 option. Also checks
 * if the option is safely stored in user's buffer according to the
 * calculated length and the limitation of the buffer.
 */
static int
ip6optlen(u_int8_t *opt, u_int8_t *lim)
{
	int optlen;

	if (*opt == IP6OPT_PAD1)
		optlen = 1;
	else {
		/* is there enough space to store type and len? */
		if (opt + 2 > lim)
			return(0);
		optlen = *(opt + 1) + 2;
	}
	if (opt + optlen <= lim)
		return(optlen);

	return(0);
}

static void
inet6_insert_padopt(u_char *p, int len)
{
	switch(len) {
	 case 0:
		 return;
	 case 1:
		 p[0] = IP6OPT_PAD1;
		 return;
	 default:
		 p[0] = IP6OPT_PADN;
		 p[1] = len - 2; 
		 memset(&p[2], 0, len - 2);
		 return;
	}
}

/*
 * The following functions are defined in RFC3542, which is a successor
 * of RFC2292.
 */

int
inet6_opt_init(void *extbuf, socklen_t extlen)
{
	struct ip6_ext *ext = (struct ip6_ext *)extbuf;

	if (ext) {
		if (extlen <= 0 || (extlen % 8))
			return(-1);
		ext->ip6e_len = (extlen >> 3) - 1;
	}

	return(2);		/* sizeof the next and the length fields */
}

int
inet6_opt_append(void *extbuf, socklen_t extlen, int offset, u_int8_t type,
		 socklen_t len, u_int8_t align, void **databufp)
{
	int currentlen = offset, padlen = 0;

	/*
	 * The option type must have a value from 2 to 255, inclusive.
	 * (0 and 1 are reserved for the Pad1 and PadN options, respectively.)
	 */
	if (type < 2)
		return(-1);

	/*
	 * The option data length must have a value between 0 and 255,
	 * inclusive, and is the length of the option data that follows.
	 */
	if (len > 255 || len < 0 )
		return(-1);

	/*
	 * The align parameter must have a value of 1, 2, 4, or 8.
	 * The align value can not exceed the value of len.
	 */
	if (align != 1 && align != 2 && align != 4 && align != 8)
		return(-1);
	if (align > len)
		return(-1);

	/* Calculate the padding length. */
	currentlen += 2 + len;	/* 2 means "type + len" */
	if (currentlen % align)
		padlen = align - (currentlen % align);

	/* The option must fit in the extension header buffer. */
	currentlen += padlen;
	if (extlen &&		/* XXX: right? */
	    currentlen > extlen)
		return(-1);

	if (extbuf) {
		u_int8_t *optp = (u_int8_t *)extbuf + offset;

		if (padlen == 1) {
			/* insert a Pad1 option */
			*optp = IP6OPT_PAD1;
			optp++;
		}
		else if (padlen > 0) {
			/* insert a PadN option for alignment */
			*optp++ = IP6OPT_PADN;
			*optp++ = padlen - 2;
			memset(optp, 0, padlen - 2);
			optp += (padlen - 2);
		}

		*optp++ = type;
		*optp++ = len;

		*databufp = optp;
	}

	return(currentlen);
}

int
inet6_opt_finish(void *extbuf, socklen_t extlen, int offset)
{
	int updatelen = offset > 0 ? (1 + ((offset - 1) | 7)) : 0;

	if (extbuf) {
		u_int8_t *padp;
		int padlen = updatelen - offset;

		if (updatelen > extlen)
			return(-1);

		padp = (u_int8_t *)extbuf + offset;
		if (padlen == 1)
			*padp = IP6OPT_PAD1;
		else if (padlen > 0) {
			*padp++ = IP6OPT_PADN;
			*padp++ = (padlen - 2);
			memset(padp, 0, padlen - 2);
		}
	}

	return(updatelen);
}

int
inet6_opt_set_val(void *databuf, int offset, void *val, socklen_t vallen)
{

	memcpy((u_int8_t *)databuf + offset, val, vallen);
	return(offset + vallen);
}

int
inet6_opt_next(void *extbuf, socklen_t extlen, int offset, u_int8_t *typep,
	       socklen_t *lenp, void **databufp)
{
	u_int8_t *optp, *lim;
	int optlen;

	/* Validate extlen. XXX: is the variable really necessary?? */
	if (extlen == 0 || (extlen % 8))
		return(-1);
	lim = (u_int8_t *)extbuf + extlen;

	/*
	 * If this is the first time this function called for this options
	 * header, simply return the 1st option.
	 * Otherwise, search the option list for the next option.
	 */
	if (offset == 0) {
		optp = (u_int8_t *)((struct ip6_hbh *)extbuf + 1);
	}
	else
		optp = (u_int8_t *)extbuf + offset;

	/* Find the next option skipping any padding options. */
	while(optp < lim) {
		switch(*optp) {
		case IP6OPT_PAD1:
			optp++;
			break;
		case IP6OPT_PADN:
			if ((optlen = ip6optlen(optp, lim)) == 0)
				goto optend;
			optp += optlen;
			break;
		default:	/* found */
			if ((optlen = ip6optlen(optp, lim)) == 0)
				goto optend;
			*typep = *optp;
			*lenp = optlen - 2;
			*databufp = optp + 2;
			return(optp + optlen - (u_int8_t *)extbuf);
		}
	}

  optend:
	*databufp = NULL; /* for safety */
	return(-1);
}

int
inet6_opt_find(void *extbuf, socklen_t extlen, int offset, u_int8_t type,
	       socklen_t *lenp, void **databufp)
{
	u_int8_t *optp, *lim;
	int optlen;

	/* Validate extlen. XXX: is the variable really necessary?? */
	if (extlen == 0 || (extlen % 8))
		return(-1);
	lim = (u_int8_t *)extbuf + extlen;

	/*
	 * If this is the first time this function called for this options
	 * header, simply return the 1st option.
	 * Otherwise, search the option list for the next option.
	 */
	if (offset == 0) {
		optp = (u_int8_t *)((struct ip6_hbh *)extbuf + 1);
	}
	else
		optp = (u_int8_t *)extbuf + offset;

	/* Find the specified option */
	while(optp < lim) {
		if ((optlen = ip6optlen(optp, lim)) == 0)
			goto optend;

		if (*optp == type) { /* found */
			*lenp = optlen - 2;
			*databufp = optp + 2;
			return(optp + optlen - (u_int8_t *)extbuf);
		}

		optp += optlen;
	}

  optend:
	*databufp = NULL; /* for safety */
	return(-1);
}

int
inet6_opt_get_val(void *databuf, int offset, void *val, socklen_t vallen)
{

	/* we can't assume alignment here */
	memcpy(val, (u_int8_t *)databuf + offset, vallen);

	return(offset + vallen);
}