/* * Copyright (c) 1998-2010, 2012 Proofpoint, Inc. and its suppliers. * All rights reserved. * Copyright (c) 1983, 1995-1997 Eric P. Allman. All rights reserved. * Copyright (c) 1988, 1993 * The Regents of the University of California. All rights reserved. * * By using this file, you agree to the terms and conditions set * forth in the LICENSE file which can be found at the top level of * the sendmail distribution. * */ #include #include SM_RCSID("@(#)$Id: deliver.c,v 8.1030 2013-11-22 20:51:55 ca Exp $") #if HASSETUSERCONTEXT # include #endif #if NETINET || NETINET6 # include #endif #if STARTTLS || SASL # include "sfsasl.h" # include "tls.h" #endif static int deliver __P((ENVELOPE *, ADDRESS *)); static void dup_queue_file __P((ENVELOPE *, ENVELOPE *, int)); static void mailfiletimeout __P((int)); static void endwaittimeout __P((int)); static int parse_hostsignature __P((char *, char **, MAILER *)); static void sendenvelope __P((ENVELOPE *, int)); static int coloncmp __P((const char *, const char *)); #if STARTTLS # include # if DANE static int starttls __P((MAILER *, MCI *, ENVELOPE *, dane_vrfy_ctx_P)); # else static int starttls __P((MAILER *, MCI *, ENVELOPE *)); # endif static int endtlsclt __P((MCI *)); #endif /* STARTTLS */ #if STARTTLS || SASL static bool iscltflgset __P((ENVELOPE *, int)); #endif #if _FFR_OCC # include #endif /* ** SENDALL -- actually send all the messages. ** ** Parameters: ** e -- the envelope to send. ** mode -- the delivery mode to use. If SM_DEFAULT, use ** the current e->e_sendmode. ** ** Returns: ** none. ** ** Side Effects: ** Scans the send lists and sends everything it finds. ** Delivers any appropriate error messages. ** If we are running in a non-interactive mode, takes the ** appropriate action. */ void sendall(e, mode) ENVELOPE *e; int mode; { register ADDRESS *q; char *owner; int otherowners; int save_errno; register ENVELOPE *ee; ENVELOPE *splitenv = NULL; int oldverbose = Verbose; bool somedeliveries = false, expensive = false; pid_t pid; /* ** If this message is to be discarded, don't bother sending ** the message at all. */ if (bitset(EF_DISCARD, e->e_flags)) { if (tTd(13, 1)) sm_dprintf("sendall: discarding id %s\n", e->e_id); e->e_flags |= EF_CLRQUEUE; if (LogLevel > 9) logundelrcpts(e, "discarded", 9, true); else if (LogLevel > 4) sm_syslog(LOG_INFO, e->e_id, "discarded"); markstats(e, NULL, STATS_REJECT); return; } /* ** If we have had global, fatal errors, don't bother sending ** the message at all if we are in SMTP mode. Local errors ** (e.g., a single address failing) will still cause the other ** addresses to be sent. */ if (bitset(EF_FATALERRS, e->e_flags) && (OpMode == MD_SMTP || OpMode == MD_DAEMON)) { e->e_flags |= EF_CLRQUEUE; return; } /* determine actual delivery mode */ if (mode == SM_DEFAULT) { mode = e->e_sendmode; if (mode != SM_VERIFY && mode != SM_DEFER && shouldqueue(e->e_msgpriority, e->e_ctime)) mode = SM_QUEUE; } if (tTd(13, 1)) { sm_dprintf("\n===== SENDALL: mode %c, id %s, e_from ", mode, e->e_id); printaddr(sm_debug_file(), &e->e_from, false); sm_dprintf("\te_flags = "); printenvflags(e); sm_dprintf("sendqueue:\n"); printaddr(sm_debug_file(), e->e_sendqueue, true); } /* ** Do any preprocessing necessary for the mode we are running. ** Check to make sure the hop count is reasonable. ** Delete sends to the sender in mailing lists. */ CurEnv = e; if (tTd(62, 1)) checkfds(NULL); if (e->e_hopcount > MaxHopCount) { char *recip; if (e->e_sendqueue != NULL && e->e_sendqueue->q_paddr != NULL) recip = e->e_sendqueue->q_paddr; else recip = "(nobody)"; errno = 0; queueup(e, WILL_BE_QUEUED(mode), false); e->e_flags |= EF_FATALERRS|EF_PM_NOTIFY|EF_CLRQUEUE; ExitStat = EX_UNAVAILABLE; syserr("554 5.4.6 Too many hops %d (%d max): from %s via %s, to %s", e->e_hopcount, MaxHopCount, e->e_from.q_paddr, RealHostName == NULL ? "localhost" : RealHostName, recip); for (q = e->e_sendqueue; q != NULL; q = q->q_next) { if (QS_IS_DEAD(q->q_state)) continue; q->q_state = QS_BADADDR; q->q_status = "5.4.6"; q->q_rstatus = "554 5.4.6 Too many hops"; } return; } /* ** Do sender deletion. ** ** If the sender should be queued up, skip this. ** This can happen if the name server is hosed when you ** are trying to send mail. The result is that the sender ** is instantiated in the queue as a recipient. */ if (!bitset(EF_METOO, e->e_flags) && !QS_IS_QUEUEUP(e->e_from.q_state)) { if (tTd(13, 5)) { sm_dprintf("sendall: QS_SENDER "); printaddr(sm_debug_file(), &e->e_from, false); } e->e_from.q_state = QS_SENDER; (void) recipient(&e->e_from, &e->e_sendqueue, 0, e); } /* ** Handle alias owners. ** ** We scan up the q_alias chain looking for owners. ** We discard owners that are the same as the return path. */ for (q = e->e_sendqueue; q != NULL; q = q->q_next) { register struct address *a; for (a = q; a != NULL && a->q_owner == NULL; a = a->q_alias) continue; if (a != NULL) q->q_owner = a->q_owner; if (q->q_owner != NULL && !QS_IS_DEAD(q->q_state) && strcmp(q->q_owner, e->e_from.q_paddr) == 0) q->q_owner = NULL; } if (tTd(13, 25)) { sm_dprintf("\nAfter first owner pass, sendq =\n"); printaddr(sm_debug_file(), e->e_sendqueue, true); } owner = ""; otherowners = 1; while (owner != NULL && otherowners > 0) { if (tTd(13, 28)) sm_dprintf("owner = \"%s\", otherowners = %d\n", owner, otherowners); owner = NULL; otherowners = bitset(EF_SENDRECEIPT, e->e_flags) ? 1 : 0; for (q = e->e_sendqueue; q != NULL; q = q->q_next) { if (tTd(13, 30)) { sm_dprintf("Checking "); printaddr(sm_debug_file(), q, false); } if (QS_IS_DEAD(q->q_state)) { if (tTd(13, 30)) sm_dprintf(" ... QS_IS_DEAD\n"); continue; } if (tTd(13, 29) && !tTd(13, 30)) { sm_dprintf("Checking "); printaddr(sm_debug_file(), q, false); } if (q->q_owner != NULL) { if (owner == NULL) { if (tTd(13, 40)) sm_dprintf(" ... First owner = \"%s\"\n", q->q_owner); owner = q->q_owner; } else if (owner != q->q_owner) { if (strcmp(owner, q->q_owner) == 0) { if (tTd(13, 40)) sm_dprintf(" ... Same owner = \"%s\"\n", owner); /* make future comparisons cheap */ q->q_owner = owner; } else { if (tTd(13, 40)) sm_dprintf(" ... Another owner \"%s\"\n", q->q_owner); otherowners++; } owner = q->q_owner; } else if (tTd(13, 40)) sm_dprintf(" ... Same owner = \"%s\"\n", owner); } else { if (tTd(13, 40)) sm_dprintf(" ... Null owner\n"); otherowners++; } if (QS_IS_BADADDR(q->q_state)) { if (tTd(13, 30)) sm_dprintf(" ... QS_IS_BADADDR\n"); continue; } if (QS_IS_QUEUEUP(q->q_state)) { MAILER *m = q->q_mailer; /* ** If we have temporary address failures ** (e.g., dns failure) and a fallback MX is ** set, send directly to the fallback MX host. */ if (FallbackMX != NULL && !wordinclass(FallbackMX, 'w') && mode != SM_VERIFY && !bitnset(M_NOMX, m->m_flags) && strcmp(m->m_mailer, "[IPC]") == 0 && m->m_argv[0] != NULL && strcmp(m->m_argv[0], "TCP") == 0) { int len; char *p; if (tTd(13, 30)) sm_dprintf(" ... FallbackMX\n"); len = strlen(FallbackMX) + 1; p = sm_rpool_malloc_x(e->e_rpool, len); (void) sm_strlcpy(p, FallbackMX, len); q->q_state = QS_OK; q->q_host = p; } else { if (tTd(13, 30)) sm_dprintf(" ... QS_IS_QUEUEUP\n"); continue; } } /* ** If this mailer is expensive, and if we don't ** want to make connections now, just mark these ** addresses and return. This is useful if we ** want to batch connections to reduce load. This ** will cause the messages to be queued up, and a ** daemon will come along to send the messages later. */ if (NoConnect && !Verbose && bitnset(M_EXPENSIVE, q->q_mailer->m_flags)) { if (tTd(13, 30)) sm_dprintf(" ... expensive\n"); q->q_state = QS_QUEUEUP; expensive = true; } else if (bitnset(M_HOLD, q->q_mailer->m_flags) && QueueLimitId == NULL && QueueLimitSender == NULL && QueueLimitRecipient == NULL) { if (tTd(13, 30)) sm_dprintf(" ... hold\n"); q->q_state = QS_QUEUEUP; expensive = true; } else if (QueueMode != QM_QUARANTINE && e->e_quarmsg != NULL) { if (tTd(13, 30)) sm_dprintf(" ... quarantine: %s\n", e->e_quarmsg); q->q_state = QS_QUEUEUP; expensive = true; } else { if (tTd(13, 30)) sm_dprintf(" ... deliverable\n"); somedeliveries = true; } } if (owner != NULL && otherowners > 0) { /* ** Split this envelope into two. */ ee = (ENVELOPE *) sm_rpool_malloc_x(e->e_rpool, sizeof(*ee)); STRUCTCOPY(*e, *ee); ee->e_message = NULL; ee->e_id = NULL; assign_queueid(ee); if (tTd(13, 1)) sm_dprintf("sendall: split %s into %s, owner = \"%s\", otherowners = %d\n", e->e_id, ee->e_id, owner, otherowners); ee->e_header = copyheader(e->e_header, ee->e_rpool); ee->e_sendqueue = copyqueue(e->e_sendqueue, ee->e_rpool); ee->e_errorqueue = copyqueue(e->e_errorqueue, ee->e_rpool); ee->e_flags = e->e_flags & ~(EF_INQUEUE|EF_CLRQUEUE|EF_FATALERRS|EF_SENDRECEIPT|EF_RET_PARAM); ee->e_flags |= EF_NORECEIPT; setsender(owner, ee, NULL, '\0', true); if (tTd(13, 5)) { sm_dprintf("sendall(split): QS_SENDER "); printaddr(sm_debug_file(), &ee->e_from, false); } ee->e_from.q_state = QS_SENDER; ee->e_dfp = NULL; ee->e_lockfp = NULL; ee->e_xfp = NULL; ee->e_qgrp = e->e_qgrp; ee->e_qdir = e->e_qdir; ee->e_errormode = EM_MAIL; ee->e_sibling = splitenv; ee->e_statmsg = NULL; if (e->e_quarmsg != NULL) ee->e_quarmsg = sm_rpool_strdup_x(ee->e_rpool, e->e_quarmsg); splitenv = ee; for (q = e->e_sendqueue; q != NULL; q = q->q_next) { if (q->q_owner == owner) { q->q_state = QS_CLONED; if (tTd(13, 6)) sm_dprintf("\t... stripping %s from original envelope\n", q->q_paddr); } } for (q = ee->e_sendqueue; q != NULL; q = q->q_next) { if (q->q_owner != owner) { q->q_state = QS_CLONED; if (tTd(13, 6)) sm_dprintf("\t... dropping %s from cloned envelope\n", q->q_paddr); } else { /* clear DSN parameters */ q->q_flags &= ~(QHASNOTIFY|Q_PINGFLAGS); q->q_flags |= DefaultNotify & ~QPINGONSUCCESS; if (tTd(13, 6)) sm_dprintf("\t... moving %s to cloned envelope\n", q->q_paddr); } } if (mode != SM_VERIFY && bitset(EF_HAS_DF, e->e_flags)) dup_queue_file(e, ee, DATAFL_LETTER); /* ** Give the split envelope access to the parent ** transcript file for errors obtained while ** processing the recipients (done before the ** envelope splitting). */ if (e->e_xfp != NULL) ee->e_xfp = sm_io_dup(e->e_xfp); /* failed to dup e->e_xfp, start a new transcript */ if (ee->e_xfp == NULL) openxscript(ee); if (mode != SM_VERIFY && LogLevel > 4) sm_syslog(LOG_INFO, e->e_id, "%s: clone: owner=%s", ee->e_id, owner); } } if (owner != NULL) { setsender(owner, e, NULL, '\0', true); if (tTd(13, 5)) { sm_dprintf("sendall(owner): QS_SENDER "); printaddr(sm_debug_file(), &e->e_from, false); } e->e_from.q_state = QS_SENDER; e->e_errormode = EM_MAIL; e->e_flags |= EF_NORECEIPT; e->e_flags &= ~EF_FATALERRS; } /* if nothing to be delivered, just queue up everything */ if (!somedeliveries && !WILL_BE_QUEUED(mode) && mode != SM_VERIFY) { time_t now; if (tTd(13, 29)) sm_dprintf("No deliveries: auto-queueing\n"); mode = SM_QUEUE; now = curtime(); /* treat this as a delivery in terms of counting tries */ e->e_dtime = now; if (!expensive) e->e_ntries++; for (ee = splitenv; ee != NULL; ee = ee->e_sibling) { ee->e_dtime = now; if (!expensive) ee->e_ntries++; } } if ((WILL_BE_QUEUED(mode) || mode == SM_FORK || (mode != SM_VERIFY && (SuperSafe == SAFE_REALLY || SuperSafe == SAFE_REALLY_POSTMILTER))) && (!bitset(EF_INQUEUE, e->e_flags) || splitenv != NULL)) { bool msync; /* ** Be sure everything is instantiated in the queue. ** Split envelopes first in case the machine crashes. ** If the original were done first, we may lose ** recipients. */ #if !HASFLOCK msync = false; #else msync = mode == SM_FORK; #endif for (ee = splitenv; ee != NULL; ee = ee->e_sibling) queueup(ee, WILL_BE_QUEUED(mode), msync); queueup(e, WILL_BE_QUEUED(mode), msync); } if (tTd(62, 10)) checkfds("after envelope splitting"); /* ** If we belong in background, fork now. */ if (tTd(13, 20)) { sm_dprintf("sendall: final mode = %c\n", mode); if (tTd(13, 21)) { sm_dprintf("\n================ Final Send Queue(s) =====================\n"); sm_dprintf("\n *** Envelope %s, e_from=%s ***\n", e->e_id, e->e_from.q_paddr); printaddr(sm_debug_file(), e->e_sendqueue, true); for (ee = splitenv; ee != NULL; ee = ee->e_sibling) { sm_dprintf("\n *** Envelope %s, e_from=%s ***\n", ee->e_id, ee->e_from.q_paddr); printaddr(sm_debug_file(), ee->e_sendqueue, true); } sm_dprintf("==========================================================\n\n"); } } switch (mode) { case SM_VERIFY: Verbose = 2; break; case SM_QUEUE: case SM_DEFER: #if HASFLOCK queueonly: #endif if (e->e_nrcpts > 0) e->e_flags |= EF_INQUEUE; (void) dropenvelope(e, splitenv != NULL, true); for (ee = splitenv; ee != NULL; ee = ee->e_sibling) { if (ee->e_nrcpts > 0) ee->e_flags |= EF_INQUEUE; (void) dropenvelope(ee, false, true); } return; case SM_FORK: if (e->e_xfp != NULL) (void) sm_io_flush(e->e_xfp, SM_TIME_DEFAULT); #if !HASFLOCK /* ** Since fcntl locking has the interesting semantic that ** the lock is owned by a process, not by an open file ** descriptor, we have to flush this to the queue, and ** then restart from scratch in the child. */ { /* save id for future use */ char *qid = e->e_id; /* now drop the envelope in the parent */ e->e_flags |= EF_INQUEUE; (void) dropenvelope(e, splitenv != NULL, false); /* arrange to reacquire lock after fork */ e->e_id = qid; } for (ee = splitenv; ee != NULL; ee = ee->e_sibling) { /* save id for future use */ char *qid = ee->e_id; /* drop envelope in parent */ ee->e_flags |= EF_INQUEUE; (void) dropenvelope(ee, false, false); /* and save qid for reacquisition */ ee->e_id = qid; } #endif /* !HASFLOCK */ /* ** Since the delivery may happen in a child and the parent ** does not wait, the parent may close the maps thereby ** removing any shared memory used by the map. Therefore, ** close the maps now so the child will dynamically open ** them if necessary. */ closemaps(false); pid = fork(); if (pid < 0) { syserr("deliver: fork 1"); #if HASFLOCK goto queueonly; #else /* HASFLOCK */ e->e_id = NULL; for (ee = splitenv; ee != NULL; ee = ee->e_sibling) ee->e_id = NULL; return; #endif /* HASFLOCK */ } else if (pid > 0) { #if HASFLOCK /* be sure we leave the temp files to our child */ /* close any random open files in the envelope */ closexscript(e); if (e->e_dfp != NULL) (void) sm_io_close(e->e_dfp, SM_TIME_DEFAULT); e->e_dfp = NULL; e->e_flags &= ~EF_HAS_DF; /* can't call unlockqueue to avoid unlink of xfp */ if (e->e_lockfp != NULL) (void) sm_io_close(e->e_lockfp, SM_TIME_DEFAULT); else syserr("%s: sendall: null lockfp", e->e_id); e->e_lockfp = NULL; #endif /* HASFLOCK */ /* make sure the parent doesn't own the envelope */ e->e_id = NULL; #if USE_DOUBLE_FORK /* catch intermediate zombie */ (void) waitfor(pid); #endif return; } /* Reset global flags */ RestartRequest = NULL; RestartWorkGroup = false; ShutdownRequest = NULL; PendingSignal = 0; /* ** Initialize exception stack and default exception ** handler for child process. */ sm_exc_newthread(fatal_error); /* ** Since we have accepted responsbility for the message, ** change the SIGTERM handler. intsig() (the old handler) ** would remove the envelope if this was a command line ** message submission. */ (void) sm_signal(SIGTERM, SIG_DFL); #if USE_DOUBLE_FORK /* double fork to avoid zombies */ pid = fork(); if (pid > 0) exit(EX_OK); save_errno = errno; #endif /* USE_DOUBLE_FORK */ CurrentPid = getpid(); /* be sure we are immune from the terminal */ disconnect(2, e); clearstats(); /* prevent parent from waiting if there was an error */ if (pid < 0) { errno = save_errno; syserr("deliver: fork 2"); #if HASFLOCK e->e_flags |= EF_INQUEUE; #else e->e_id = NULL; #endif finis(true, true, ExitStat); } /* be sure to give error messages in child */ QuickAbort = false; /* ** Close any cached connections. ** ** We don't send the QUIT protocol because the parent ** still knows about the connection. ** ** This should only happen when delivering an error ** message. */ mci_flush(false, NULL); #if HASFLOCK break; #else /* HASFLOCK */ /* ** Now reacquire and run the various queue files. */ for (ee = splitenv; ee != NULL; ee = ee->e_sibling) { ENVELOPE *sibling = ee->e_sibling; (void) dowork(ee->e_qgrp, ee->e_qdir, ee->e_id, false, false, ee); ee->e_sibling = sibling; } (void) dowork(e->e_qgrp, e->e_qdir, e->e_id, false, false, e); finis(true, true, ExitStat); #endif /* HASFLOCK */ } sendenvelope(e, mode); (void) dropenvelope(e, true, true); for (ee = splitenv; ee != NULL; ee = ee->e_sibling) { CurEnv = ee; if (mode != SM_VERIFY) openxscript(ee); sendenvelope(ee, mode); (void) dropenvelope(ee, true, true); } CurEnv = e; Verbose = oldverbose; if (mode == SM_FORK) finis(true, true, ExitStat); } static void sendenvelope(e, mode) register ENVELOPE *e; int mode; { register ADDRESS *q; bool didany; if (tTd(13, 10)) sm_dprintf("sendenvelope(%s) e_flags=0x%lx\n", e->e_id == NULL ? "[NOQUEUE]" : e->e_id, e->e_flags); if (LogLevel > 80) sm_syslog(LOG_DEBUG, e->e_id, "sendenvelope, flags=0x%lx", e->e_flags); /* ** If we have had global, fatal errors, don't bother sending ** the message at all if we are in SMTP mode. Local errors ** (e.g., a single address failing) will still cause the other ** addresses to be sent. */ if (bitset(EF_FATALERRS, e->e_flags) && (OpMode == MD_SMTP || OpMode == MD_DAEMON)) { e->e_flags |= EF_CLRQUEUE; return; } /* ** Don't attempt deliveries if we want to bounce now ** or if deliver-by time is exceeded. */ if (!bitset(EF_RESPONSE, e->e_flags) && (TimeOuts.to_q_return[e->e_timeoutclass] == NOW || (IS_DLVR_RETURN(e) && e->e_deliver_by > 0 && curtime() > e->e_ctime + e->e_deliver_by))) return; /* ** Run through the list and send everything. ** ** Set EF_GLOBALERRS so that error messages during delivery ** result in returned mail. */ e->e_nsent = 0; e->e_flags |= EF_GLOBALERRS; macdefine(&e->e_macro, A_PERM, macid("{envid}"), e->e_envid); macdefine(&e->e_macro, A_PERM, macid("{bodytype}"), e->e_bodytype); didany = false; if (!bitset(EF_SPLIT, e->e_flags)) { ENVELOPE *oldsib; ENVELOPE *ee; /* ** Save old sibling and set it to NULL to avoid ** queueing up the same envelopes again. ** This requires that envelopes in that list have ** been take care of before (or at some other place). */ oldsib = e->e_sibling; e->e_sibling = NULL; if (!split_by_recipient(e) && bitset(EF_FATALERRS, e->e_flags)) { if (OpMode == MD_SMTP || OpMode == MD_DAEMON) e->e_flags |= EF_CLRQUEUE; return; } for (ee = e->e_sibling; ee != NULL; ee = ee->e_sibling) queueup(ee, false, true); /* clean up */ for (ee = e->e_sibling; ee != NULL; ee = ee->e_sibling) { /* now unlock the job */ closexscript(ee); unlockqueue(ee); /* this envelope is marked unused */ if (ee->e_dfp != NULL) { (void) sm_io_close(ee->e_dfp, SM_TIME_DEFAULT); ee->e_dfp = NULL; } ee->e_id = NULL; ee->e_flags &= ~EF_HAS_DF; } e->e_sibling = oldsib; } /* now run through the queue */ for (q = e->e_sendqueue; q != NULL; q = q->q_next) { #if XDEBUG char wbuf[MAXNAME + 20]; (void) sm_snprintf(wbuf, sizeof(wbuf), "sendall(%.*s)", MAXNAME, q->q_paddr); checkfd012(wbuf); #endif /* XDEBUG */ if (mode == SM_VERIFY) { e->e_to = q->q_paddr; if (QS_IS_SENDABLE(q->q_state)) { if (q->q_host != NULL && q->q_host[0] != '\0') message("deliverable: mailer %s, host %s, user %s", q->q_mailer->m_name, q->q_host, q->q_user); else message("deliverable: mailer %s, user %s", q->q_mailer->m_name, q->q_user); } } else if (QS_IS_OK(q->q_state)) { /* ** Checkpoint the send list every few addresses */ if (CheckpointInterval > 0 && e->e_nsent >= CheckpointInterval) { queueup(e, false, false); e->e_nsent = 0; } (void) deliver(e, q); didany = true; } } if (didany) { e->e_dtime = curtime(); e->e_ntries++; } #if XDEBUG checkfd012("end of sendenvelope"); #endif } #if REQUIRES_DIR_FSYNC /* ** SYNC_DIR -- fsync a directory based on a filename ** ** Parameters: ** filename -- path of file ** panic -- panic? ** ** Returns: ** none */ void sync_dir(filename, panic) char *filename; bool panic; { int dirfd; char *dirp; char dir[MAXPATHLEN]; if (!RequiresDirfsync) return; /* filesystems which require the directory be synced */ dirp = strrchr(filename, '/'); if (dirp != NULL) { if (sm_strlcpy(dir, filename, sizeof(dir)) >= sizeof(dir)) return; dir[dirp - filename] = '\0'; dirp = dir; } else dirp = "."; dirfd = open(dirp, O_RDONLY, 0700); if (tTd(40,32)) sm_syslog(LOG_INFO, NOQID, "sync_dir: %s: fsync(%d)", dirp, dirfd); if (dirfd >= 0) { if (fsync(dirfd) < 0) { if (panic) syserr("!sync_dir: cannot fsync directory %s", dirp); else if (LogLevel > 1) sm_syslog(LOG_ERR, NOQID, "sync_dir: cannot fsync directory %s: %s", dirp, sm_errstring(errno)); } (void) close(dirfd); } } #endif /* REQUIRES_DIR_FSYNC */ /* ** DUP_QUEUE_FILE -- duplicate a queue file into a split queue ** ** Parameters: ** e -- the existing envelope ** ee -- the new envelope ** type -- the queue file type (e.g., DATAFL_LETTER) ** ** Returns: ** none */ static void dup_queue_file(e, ee, type) ENVELOPE *e, *ee; int type; { char f1buf[MAXPATHLEN], f2buf[MAXPATHLEN]; ee->e_dfp = NULL; ee->e_xfp = NULL; /* ** Make sure both are in the same directory. */ (void) sm_strlcpy(f1buf, queuename(e, type), sizeof(f1buf)); (void) sm_strlcpy(f2buf, queuename(ee, type), sizeof(f2buf)); /* Force the df to disk if it's not there yet */ if (type == DATAFL_LETTER && e->e_dfp != NULL && sm_io_setinfo(e->e_dfp, SM_BF_COMMIT, NULL) < 0 && errno != EINVAL) { syserr("!dup_queue_file: can't commit %s", f1buf); /* NOTREACHED */ } if (link(f1buf, f2buf) < 0) { int save_errno = errno; syserr("sendall: link(%s, %s)", f1buf, f2buf); if (save_errno == EEXIST) { if (unlink(f2buf) < 0) { syserr("!sendall: unlink(%s): permanent", f2buf); /* NOTREACHED */ } if (link(f1buf, f2buf) < 0) { syserr("!sendall: link(%s, %s): permanent", f1buf, f2buf); /* NOTREACHED */ } } } SYNC_DIR(f2buf, true); } /* ** DOFORK -- do a fork, retrying a couple of times on failure. ** ** This MUST be a macro, since after a vfork we are running ** two processes on the same stack!!! ** ** Parameters: ** none. ** ** Returns: ** From a macro??? You've got to be kidding! ** ** Side Effects: ** Modifies the ==> LOCAL <== variable 'pid', leaving: ** pid of child in parent, zero in child. ** -1 on unrecoverable error. ** ** Notes: ** I'm awfully sorry this looks so awful. That's ** vfork for you..... */ #define NFORKTRIES 5 #ifndef FORK # define FORK fork #endif #define DOFORK(fORKfN) \ {\ register int i;\ \ for (i = NFORKTRIES; --i >= 0; )\ {\ pid = fORKfN();\ if (pid >= 0)\ break;\ if (i > 0)\ (void) sleep((unsigned) NFORKTRIES - i);\ }\ } /* ** DOFORK -- simple fork interface to DOFORK. ** ** Parameters: ** none. ** ** Returns: ** pid of child in parent. ** zero in child. ** -1 on error. ** ** Side Effects: ** returns twice, once in parent and once in child. */ pid_t dofork() { register pid_t pid = -1; DOFORK(fork); return pid; } /* ** COLONCMP -- compare host-signatures up to first ':' or EOS ** ** This takes two strings which happen to be host-signatures and ** compares them. If the lowest preference portions of the MX-RR's ** match (up to ':' or EOS, whichever is first), then we have ** match. This is used for coattail-piggybacking messages during ** message delivery. ** If the signatures are the same up to the first ':' the remainder of ** the signatures are then compared with a normal strcmp(). This saves ** re-examining the first part of the signatures. ** ** Parameters: ** a - first host-signature ** b - second host-signature ** ** Returns: ** HS_MATCH_NO -- no "match". ** HS_MATCH_FIRST -- "match" for the first MX preference ** (up to the first colon (':')). ** HS_MATCH_FULL -- match for the entire MX record. ** ** Side Effects: ** none. */ #define HS_MATCH_NO 0 #define HS_MATCH_FIRST 1 #define HS_MATCH_FULL 2 static int coloncmp(a, b) register const char *a; register const char *b; { int ret = HS_MATCH_NO; int braclev = 0; while (*a == *b++) { /* Need to account for IPv6 bracketed addresses */ if (*a == '[') braclev++; else if (*a == ']' && braclev > 0) braclev--; else if (*a == ':' && braclev <= 0) { ret = HS_MATCH_FIRST; a++; break; } else if (*a == '\0') return HS_MATCH_FULL; /* a full match */ a++; } if (ret == HS_MATCH_NO && braclev <= 0 && ((*a == '\0' && *(b - 1) == ':') || (*a == ':' && *(b - 1) == '\0'))) return HS_MATCH_FIRST; if (ret == HS_MATCH_FIRST && strcmp(a, b) == 0) return HS_MATCH_FULL; return ret; } /* ** SHOULD_TRY_FBSH -- Should try FallbackSmartHost? ** ** Parameters: ** e -- envelope ** tried_fallbacksmarthost -- has been tried already? (in/out) ** hostbuf -- buffer for hostname (expand FallbackSmartHost) (out) ** hbsz -- size of hostbuf ** status -- current delivery status ** ** Returns: ** true iff FallbackSmartHost should be tried. */ static bool should_try_fbsh __P((ENVELOPE *, bool *, char *, size_t, int)); static bool should_try_fbsh(e, tried_fallbacksmarthost, hostbuf, hbsz, status) ENVELOPE *e; bool *tried_fallbacksmarthost; char *hostbuf; size_t hbsz; int status; { /* ** If the host was not found or a temporary failure occurred ** and a FallbackSmartHost is defined (and we have not yet ** tried it), then make one last try with it as the host. */ if ((status == EX_NOHOST || status == EX_TEMPFAIL) && FallbackSmartHost != NULL && !*tried_fallbacksmarthost) { *tried_fallbacksmarthost = true; expand(FallbackSmartHost, hostbuf, hbsz, e); if (!wordinclass(hostbuf, 'w')) { if (tTd(11, 1)) sm_dprintf("one last try with FallbackSmartHost %s\n", hostbuf); return true; } } return false; } /* ** DELIVER -- Deliver a message to a list of addresses. ** ** This routine delivers to everyone on the same host as the ** user on the head of the list. It is clever about mailers ** that don't handle multiple users. It is NOT guaranteed ** that it will deliver to all these addresses however -- so ** deliver should be called once for each address on the list. ** Deliver tries to be as opportunistic as possible about piggybacking ** messages. Some definitions to make understanding easier follow below. ** Piggybacking occurs when an existing connection to a mail host can ** be used to send the same message to more than one recipient at the ** same time. So "no piggybacking" means one message for one recipient ** per connection. "Intentional piggybacking" happens when the ** recipients' host address (not the mail host address) is used to ** attempt piggybacking. Recipients with the same host address ** have the same mail host. "Coincidental piggybacking" relies on ** piggybacking based on all the mail host addresses in the MX-RR. This ** is "coincidental" in the fact it could not be predicted until the ** MX Resource Records for the hosts were obtained and examined. For ** example (preference order and equivalence is important, not values): ** domain1 IN MX 10 mxhost-A ** IN MX 20 mxhost-B ** domain2 IN MX 4 mxhost-A ** IN MX 8 mxhost-B ** Domain1 and domain2 can piggyback the same message to mxhost-A or ** mxhost-B (if mxhost-A cannot be reached). ** "Coattail piggybacking" relaxes the strictness of "coincidental ** piggybacking" in the hope that most significant (lowest value) ** MX preference host(s) can create more piggybacking. For example ** (again, preference order and equivalence is important, not values): ** domain3 IN MX 100 mxhost-C ** IN MX 100 mxhost-D ** IN MX 200 mxhost-E ** domain4 IN MX 50 mxhost-C ** IN MX 50 mxhost-D ** IN MX 80 mxhost-F ** A message for domain3 and domain4 can piggyback to mxhost-C if mxhost-C ** is available. Same with mxhost-D because in both RR's the preference ** value is the same as mxhost-C, respectively. ** So deliver attempts coattail piggybacking when possible. If the ** first MX preference level hosts cannot be used then the piggybacking ** reverts to coincidental piggybacking. Using the above example you ** cannot deliver to mxhost-F for domain3 regardless of preference value. ** ("Coattail" from "riding on the coattails of your predecessor" meaning ** gaining benefit from a predecessor effort with no or little addition ** effort. The predecessor here being the preceding MX RR). ** ** Parameters: ** e -- the envelope to deliver. ** firstto -- head of the address list to deliver to. ** ** Returns: ** zero -- successfully delivered. ** else -- some failure, see ExitStat for more info. ** ** Side Effects: ** The standard input is passed off to someone. */ static int deliver(e, firstto) register ENVELOPE *e; ADDRESS *firstto; { char *host; /* host being sent to */ char *user; /* user being sent to */ char **pvp; register char **mvp; register char *p; register MAILER *m; /* mailer for this recipient */ ADDRESS *volatile ctladdr; #if HASSETUSERCONTEXT ADDRESS *volatile contextaddr = NULL; #endif register MCI *volatile mci; register ADDRESS *SM_NONVOLATILE to = firstto; volatile bool clever = false; /* running user smtp to this mailer */ ADDRESS *volatile tochain = NULL; /* users chain in this mailer call */ int rcode; /* response code */ SM_NONVOLATILE int lmtp_rcode = EX_OK; SM_NONVOLATILE int nummxhosts = 0; /* number of MX hosts available */ SM_NONVOLATILE int hostnum = 0; /* current MX host index */ char *firstsig; /* signature of firstto */ volatile pid_t pid = -1; char *volatile curhost; SM_NONVOLATILE unsigned short port = 0; SM_NONVOLATILE time_t enough = 0; #if NETUNIX char *SM_NONVOLATILE mux_path = NULL; /* path to UNIX domain socket */ #endif time_t xstart; bool suidwarn; bool anyok; /* at least one address was OK */ SM_NONVOLATILE bool goodmxfound = false; /* at least one MX was OK */ bool ovr; bool quarantine; #if STARTTLS /* 0: try TLS, 1: try without TLS again, >1: don't try again */ int tlsstate; # if DANE dane_vrfy_ctx_T dane_vrfy_ctx; STAB *ste; # endif #endif #if STARTTLS || SASL int dotpos; # define RM_TRAIL_DOT(name) \ do { \ dotpos = strlen(name) - 1; \ if (dotpos >= 0) \ { \ if (name[dotpos] == '.') \ name[dotpos] = '\0'; \ else \ dotpos = -1; \ } \ } while (0) # define FIX_TRAIL_DOT(name) \ do { \ if (dotpos >= 0) \ name[dotpos] = '.'; \ } while (0) #endif int strsize; int rcptcount; int ret; static int tobufsize = 0; static char *tobuf = NULL; char *rpath; /* translated return path */ int mpvect[2]; int rpvect[2]; char *mxhosts[MAXMXHOSTS + 1]; char *pv[MAXPV + 1]; char buf[MAXNAME + 1]; char cbuf[MAXPATHLEN]; errno = 0; SM_REQUIRE(firstto != NULL); /* same as to */ if (!QS_IS_OK(to->q_state)) return 0; suidwarn = geteuid() == 0; SM_REQUIRE(e != NULL); m = to->q_mailer; host = to->q_host; CurEnv = e; /* just in case */ e->e_statmsg = NULL; SmtpError[0] = '\0'; xstart = curtime(); #if STARTTLS tlsstate = 0; # if DANE memset(&dane_vrfy_ctx, '\0', sizeof(dane_vrfy_ctx)); ste = NULL; # endif #endif if (tTd(10, 1)) sm_dprintf("\n--deliver, id=%s, mailer=%s, host=`%s', first user=`%s'\n", e->e_id, m->m_name, host, to->q_user); if (tTd(10, 100)) printopenfds(false); /* ** Clear {client_*} macros if this is a bounce message to ** prevent rejection by check_compat ruleset. */ if (bitset(EF_RESPONSE, e->e_flags)) { macdefine(&e->e_macro, A_PERM, macid("{client_name}"), ""); macdefine(&e->e_macro, A_PERM, macid("{client_ptr}"), ""); macdefine(&e->e_macro, A_PERM, macid("{client_addr}"), ""); macdefine(&e->e_macro, A_PERM, macid("{client_port}"), ""); macdefine(&e->e_macro, A_PERM, macid("{client_resolve}"), ""); } SM_TRY { ADDRESS *skip_back = NULL; /* ** Do initial argv setup. ** Insert the mailer name. Notice that $x expansion is ** NOT done on the mailer name. Then, if the mailer has ** a picky -f flag, we insert it as appropriate. This ** code does not check for 'pv' overflow; this places a ** manifest lower limit of 4 for MAXPV. ** The from address rewrite is expected to make ** the address relative to the other end. */ /* rewrite from address, using rewriting rules */ rcode = EX_OK; SM_ASSERT(e->e_from.q_mailer != NULL); if (bitnset(M_UDBENVELOPE, e->e_from.q_mailer->m_flags)) p = e->e_sender; else p = e->e_from.q_paddr; rpath = remotename(p, m, RF_SENDERADDR|RF_CANONICAL, &rcode, e); if (rcode != EX_OK && bitnset(M_xSMTP, m->m_flags)) goto cleanup; if (strlen(rpath) > MAXNAME) { rpath = shortenstring(rpath, MAXSHORTSTR); /* avoid bogus errno */ errno = 0; syserr("remotename: huge return path %s", rpath); } rpath = sm_rpool_strdup_x(e->e_rpool, rpath); macdefine(&e->e_macro, A_PERM, 'g', rpath); macdefine(&e->e_macro, A_PERM, 'h', host); Errors = 0; pvp = pv; *pvp++ = m->m_argv[0]; /* ignore long term host status information if mailer flag W is set */ if (bitnset(M_NOHOSTSTAT, m->m_flags)) IgnoreHostStatus = true; /* insert -f or -r flag as appropriate */ if (FromFlag && (bitnset(M_FOPT, m->m_flags) || bitnset(M_ROPT, m->m_flags))) { if (bitnset(M_FOPT, m->m_flags)) *pvp++ = "-f"; else *pvp++ = "-r"; *pvp++ = rpath; } /* ** Append the other fixed parts of the argv. These run ** up to the first entry containing "$u". There can only ** be one of these, and there are only a few more slots ** in the pv after it. */ for (mvp = m->m_argv; (p = *++mvp) != NULL; ) { /* can't use strchr here because of sign extension problems */ while (*p != '\0') { if ((*p++ & 0377) == MACROEXPAND) { if (*p == 'u') break; } } if (*p != '\0') break; /* this entry is safe -- go ahead and process it */ expand(*mvp, buf, sizeof(buf), e); *pvp++ = sm_rpool_strdup_x(e->e_rpool, buf); if (pvp >= &pv[MAXPV - 3]) { syserr("554 5.3.5 Too many parameters to %s before $u", pv[0]); rcode = -1; goto cleanup; } } /* ** If we have no substitution for the user name in the argument ** list, we know that we must supply the names otherwise -- and ** SMTP is the answer!! */ if (*mvp == NULL) { /* running LMTP or SMTP */ clever = true; *pvp = NULL; setbitn(M_xSMTP, m->m_flags); } else if (bitnset(M_LMTP, m->m_flags)) { /* not running LMTP */ sm_syslog(LOG_ERR, NULL, "Warning: mailer %s: LMTP flag (F=z) turned off", m->m_name); clrbitn(M_LMTP, m->m_flags); } /* ** At this point *mvp points to the argument with $u. We ** run through our address list and append all the addresses ** we can. If we run out of space, do not fret! We can ** always send another copy later. */ e->e_to = NULL; strsize = 2; rcptcount = 0; ctladdr = NULL; if (firstto->q_signature == NULL) firstto->q_signature = hostsignature(firstto->q_mailer, firstto->q_host, firstto->q_flags & QSECURE); firstsig = firstto->q_signature; for (; to != NULL; to = to->q_next) { /* avoid sending multiple recipients to dumb mailers */ if (tochain != NULL && !bitnset(M_MUSER, m->m_flags)) break; /* if already sent or not for this host, don't send */ if (!QS_IS_OK(to->q_state)) /* already sent; look at next */ continue; /* ** Must be same mailer to keep grouping rcpts. ** If mailers don't match: continue; sendqueue is not ** sorted by mailers, so don't break; */ if (to->q_mailer != firstto->q_mailer) continue; if (to->q_signature == NULL) /* for safety */ to->q_signature = hostsignature(to->q_mailer, to->q_host, to->q_flags & QSECURE); /* ** This is for coincidental and tailcoat piggybacking messages ** to the same mail host. While the signatures are identical ** (that's the MX-RR's are identical) we can do coincidental ** piggybacking. We try hard for coattail piggybacking ** with the same mail host when the next recipient has the ** same host at lowest preference. It may be that this ** won't work out, so 'skip_back' is maintained if a backup ** to coincidental piggybacking or full signature must happen. */ ret = firstto == to ? HS_MATCH_FULL : coloncmp(to->q_signature, firstsig); if (ret == HS_MATCH_FULL) skip_back = to; else if (ret == HS_MATCH_NO) break; if (!clever) { /* avoid overflowing tobuf */ strsize += strlen(to->q_paddr) + 1; if (strsize > TOBUFSIZE) break; } if (++rcptcount > to->q_mailer->m_maxrcpt) break; if (tTd(10, 1)) { sm_dprintf("\nsend to "); printaddr(sm_debug_file(), to, false); } /* compute effective uid/gid when sending */ if (bitnset(M_RUNASRCPT, to->q_mailer->m_flags)) #if HASSETUSERCONTEXT contextaddr = ctladdr = getctladdr(to); #else ctladdr = getctladdr(to); #endif if (tTd(10, 2)) { sm_dprintf("ctladdr="); printaddr(sm_debug_file(), ctladdr, false); } user = to->q_user; e->e_to = to->q_paddr; /* ** Check to see that these people are allowed to ** talk to each other. ** Check also for overflow of e_msgsize. */ if (m->m_maxsize != 0 && (e->e_msgsize > m->m_maxsize || e->e_msgsize < 0)) { e->e_flags |= EF_NO_BODY_RETN; if (bitnset(M_LOCALMAILER, to->q_mailer->m_flags)) to->q_status = "5.2.3"; else to->q_status = "5.3.4"; /* set to->q_rstatus = NULL; or to the following? */ usrerrenh(to->q_status, "552 Message is too large; %ld bytes max", m->m_maxsize); markfailure(e, to, NULL, EX_UNAVAILABLE, false); giveresponse(EX_UNAVAILABLE, to->q_status, m, NULL, ctladdr, xstart, e, to); continue; } SM_SET_H_ERRNO(0); ovr = true; /* do config file checking of compatibility */ quarantine = (e->e_quarmsg != NULL); rcode = rscheck("check_compat", e->e_from.q_paddr, to->q_paddr, e, RSF_RMCOMM|RSF_COUNT, 3, NULL, e->e_id, NULL, NULL); if (rcode == EX_OK) { /* do in-code checking if not discarding */ if (!bitset(EF_DISCARD, e->e_flags)) { rcode = checkcompat(to, e); ovr = false; } } if (rcode != EX_OK) { markfailure(e, to, NULL, rcode, ovr); giveresponse(rcode, to->q_status, m, NULL, ctladdr, xstart, e, to); continue; } if (!quarantine && e->e_quarmsg != NULL) { /* ** check_compat or checkcompat() has tried ** to quarantine but that isn't supported. ** Revert the attempt. */ e->e_quarmsg = NULL; macdefine(&e->e_macro, A_PERM, macid("{quarantine}"), ""); } if (bitset(EF_DISCARD, e->e_flags)) { if (tTd(10, 5)) { sm_dprintf("deliver: discarding recipient "); printaddr(sm_debug_file(), to, false); } /* pretend the message was sent */ /* XXX should we log something here? */ to->q_state = QS_DISCARDED; /* ** Remove discard bit to prevent discard of ** future recipients. This is safe because the ** true "global discard" has been handled before ** we get here. */ e->e_flags &= ~EF_DISCARD; continue; } /* ** Strip quote bits from names if the mailer is dumb ** about them. */ if (bitnset(M_STRIPQ, m->m_flags)) { stripquotes(user); stripquotes(host); } /* ** Strip all leading backslashes if requested and the ** next character is alphanumerical (the latter can ** probably relaxed a bit, see RFC2821). */ if (bitnset(M_STRIPBACKSL, m->m_flags) && user[0] == '\\') stripbackslash(user); /* hack attack -- delivermail compatibility */ if (m == ProgMailer && *user == '|') user++; /* ** If an error message has already been given, don't ** bother to send to this address. ** ** >>>>>>>>>> This clause assumes that the local mailer ** >> NOTE >> cannot do any further aliasing; that ** >>>>>>>>>> function is subsumed by sendmail. */ if (!QS_IS_OK(to->q_state)) continue; /* ** See if this user name is "special". ** If the user name has a slash in it, assume that this ** is a file -- send it off without further ado. Note ** that this type of addresses is not processed along ** with the others, so we fudge on the To person. */ if (strcmp(m->m_mailer, "[FILE]") == 0) { macdefine(&e->e_macro, A_PERM, 'u', user); p = to->q_home; if (p == NULL && ctladdr != NULL) p = ctladdr->q_home; macdefine(&e->e_macro, A_PERM, 'z', p); expand(m->m_argv[1], buf, sizeof(buf), e); if (strlen(buf) > 0) rcode = mailfile(buf, m, ctladdr, SFF_CREAT, e); else { syserr("empty filename specification for mailer %s", m->m_name); rcode = EX_CONFIG; } giveresponse(rcode, to->q_status, m, NULL, ctladdr, xstart, e, to); markfailure(e, to, NULL, rcode, true); e->e_nsent++; if (rcode == EX_OK) { to->q_state = QS_SENT; if (bitnset(M_LOCALMAILER, m->m_flags) && bitset(QPINGONSUCCESS, to->q_flags)) { to->q_flags |= QDELIVERED; to->q_status = "2.1.5"; (void) sm_io_fprintf(e->e_xfp, SM_TIME_DEFAULT, "%s... Successfully delivered\n", to->q_paddr); } } to->q_statdate = curtime(); markstats(e, to, STATS_NORMAL); continue; } /* ** Address is verified -- add this user to mailer ** argv, and add it to the print list of recipients. */ /* link together the chain of recipients */ to->q_tchain = tochain; tochain = to; e->e_to = "[CHAIN]"; macdefine(&e->e_macro, A_PERM, 'u', user); /* to user */ p = to->q_home; if (p == NULL && ctladdr != NULL) p = ctladdr->q_home; macdefine(&e->e_macro, A_PERM, 'z', p); /* user's home */ /* set the ${dsn_notify} macro if applicable */ if (bitset(QHASNOTIFY, to->q_flags)) { char notify[MAXLINE]; notify[0] = '\0'; if (bitset(QPINGONSUCCESS, to->q_flags)) (void) sm_strlcat(notify, "SUCCESS,", sizeof(notify)); if (bitset(QPINGONFAILURE, to->q_flags)) (void) sm_strlcat(notify, "FAILURE,", sizeof(notify)); if (bitset(QPINGONDELAY, to->q_flags)) (void) sm_strlcat(notify, "DELAY,", sizeof(notify)); /* Set to NEVER or drop trailing comma */ if (notify[0] == '\0') (void) sm_strlcat(notify, "NEVER", sizeof(notify)); else notify[strlen(notify) - 1] = '\0'; macdefine(&e->e_macro, A_TEMP, macid("{dsn_notify}"), notify); } else macdefine(&e->e_macro, A_PERM, macid("{dsn_notify}"), NULL); /* ** Expand out this user into argument list. */ if (!clever) { expand(*mvp, buf, sizeof(buf), e); *pvp++ = sm_rpool_strdup_x(e->e_rpool, buf); if (pvp >= &pv[MAXPV - 2]) { /* allow some space for trailing parms */ break; } } } /* see if any addresses still exist */ if (tochain == NULL) { rcode = 0; goto cleanup; } /* print out messages as full list */ strsize = 1; for (to = tochain; to != NULL; to = to->q_tchain) strsize += strlen(to->q_paddr) + 1; if (strsize < TOBUFSIZE) strsize = TOBUFSIZE; if (strsize > tobufsize) { SM_FREE(tobuf); tobuf = sm_pmalloc_x(strsize); tobufsize = strsize; } p = tobuf; *p = '\0'; for (to = tochain; to != NULL; to = to->q_tchain) { (void) sm_strlcpyn(p, tobufsize - (p - tobuf), 2, ",", to->q_paddr); p += strlen(p); } e->e_to = tobuf + 1; /* ** Fill out any parameters after the $u parameter. */ if (!clever) { while (*++mvp != NULL) { expand(*mvp, buf, sizeof(buf), e); *pvp++ = sm_rpool_strdup_x(e->e_rpool, buf); if (pvp >= &pv[MAXPV]) syserr("554 5.3.0 deliver: pv overflow after $u for %s", pv[0]); } } *pvp++ = NULL; /* ** Call the mailer. ** The argument vector gets built, pipes ** are created as necessary, and we fork & exec as ** appropriate. ** If we are running SMTP, we just need to clean up. */ /* XXX this seems a bit weird */ if (ctladdr == NULL && m != ProgMailer && m != FileMailer && bitset(QGOODUID, e->e_from.q_flags)) ctladdr = &e->e_from; #if NAMED_BIND if (ConfigLevel < 2) _res.options &= ~(RES_DEFNAMES | RES_DNSRCH); /* XXX */ #endif if (tTd(11, 1)) { sm_dprintf("openmailer:"); printav(sm_debug_file(), pv); } errno = 0; SM_SET_H_ERRNO(0); CurHostName = NULL; /* ** Deal with the special case of mail handled through an IPC ** connection. ** In this case we don't actually fork. We must be ** running SMTP for this to work. We will return a ** zero pid to indicate that we are running IPC. ** We also handle a debug version that just talks to stdin/out. */ curhost = NULL; SmtpPhase = NULL; mci = NULL; #if XDEBUG { char wbuf[MAXLINE]; /* make absolutely certain 0, 1, and 2 are in use */ (void) sm_snprintf(wbuf, sizeof(wbuf), "%s... openmailer(%s)", shortenstring(e->e_to, MAXSHORTSTR), m->m_name); checkfd012(wbuf); } #endif /* XDEBUG */ /* check for 8-bit available */ if (bitset(EF_HAS8BIT, e->e_flags) && bitnset(M_7BITS, m->m_flags) && (bitset(EF_DONT_MIME, e->e_flags) || !(bitset(MM_MIME8BIT, MimeMode) || (bitset(EF_IS_MIME, e->e_flags) && bitset(MM_CVTMIME, MimeMode))))) { e->e_status = "5.6.3"; usrerrenh(e->e_status, "554 Cannot send 8-bit data to 7-bit destination"); rcode = EX_DATAERR; goto give_up; } if (tTd(62, 8)) checkfds("before delivery"); /* check for Local Person Communication -- not for mortals!!! */ if (strcmp(m->m_mailer, "[LPC]") == 0) { if (clever) { /* flush any expired connections */ (void) mci_scan(NULL); /* try to get a cached connection or just a slot */ mci = mci_get(m->m_name, m); if (mci->mci_host == NULL) mci->mci_host = m->m_name; CurHostName = mci->mci_host; if (mci->mci_state != MCIS_CLOSED) { message("Using cached SMTP/LPC connection for %s...", m->m_name); mci->mci_deliveries++; goto do_transfer; } } else { mci = mci_new(e->e_rpool); } mci->mci_in = smioin; mci->mci_out = smioout; mci->mci_mailer = m; mci->mci_host = m->m_name; if (clever) { mci->mci_state = MCIS_OPENING; mci_cache(mci); } else mci->mci_state = MCIS_OPEN; } else if (strcmp(m->m_mailer, "[IPC]") == 0) { register int i; if (pv[0] == NULL || pv[1] == NULL || pv[1][0] == '\0') { syserr("null destination for %s mailer", m->m_mailer); rcode = EX_CONFIG; goto give_up; } #if NETUNIX if (strcmp(pv[0], "FILE") == 0) { curhost = CurHostName = "localhost"; mux_path = pv[1]; } else #endif /* NETUNIX */ { CurHostName = pv[1]; /* XXX ??? */ curhost = hostsignature(m, pv[1], firstto->q_flags & QSECURE); } if (curhost == NULL || curhost[0] == '\0') { syserr("null host signature for %s", pv[1]); rcode = EX_CONFIG; goto give_up; } if (!clever) { syserr("554 5.3.5 non-clever IPC"); rcode = EX_CONFIG; goto give_up; } if (pv[2] != NULL #if NETUNIX && mux_path == NULL #endif ) { port = htons((unsigned short) atoi(pv[2])); if (port == 0) { #ifdef NO_GETSERVBYNAME syserr("Invalid port number: %s", pv[2]); #else /* NO_GETSERVBYNAME */ struct servent *sp = getservbyname(pv[2], "tcp"); if (sp == NULL) syserr("Service %s unknown", pv[2]); else port = sp->s_port; #endif /* NO_GETSERVBYNAME */ } } nummxhosts = parse_hostsignature(curhost, mxhosts, m); if (TimeOuts.to_aconnect > 0) enough = curtime() + TimeOuts.to_aconnect; tryhost: while (hostnum < nummxhosts) { char sep = ':'; char *endp; static char hostbuf[MAXNAME + 1]; bool tried_fallbacksmarthost = false; #if DANE unsigned long tlsa_flags; ste = NULL; tlsa_flags = 0; #endif #if NETINET6 if (*mxhosts[hostnum] == '[') { endp = strchr(mxhosts[hostnum] + 1, ']'); if (endp != NULL) endp = strpbrk(endp + 1, ":,"); } else endp = strpbrk(mxhosts[hostnum], ":,"); #else /* NETINET6 */ endp = strpbrk(mxhosts[hostnum], ":,"); #endif /* NETINET6 */ if (endp != NULL) { sep = *endp; *endp = '\0'; } if (hostnum == 1 && skip_back != NULL) { /* ** Coattail piggybacking is no longer an ** option with the mail host next to be tried ** no longer the lowest MX preference ** (hostnum == 1 meaning we're on the second ** preference). We do not try to coattail ** piggyback more than the first MX preference. ** Revert 'tochain' to last location for ** coincidental piggybacking. This works this ** easily because the q_tchain kept getting ** added to the top of the linked list. */ tochain = skip_back; } if (*mxhosts[hostnum] == '\0') { syserr("deliver: null host name in signature"); hostnum++; if (endp != NULL) *endp = sep; continue; } (void) sm_strlcpy(hostbuf, mxhosts[hostnum], sizeof(hostbuf)); hostnum++; if (endp != NULL) *endp = sep; #if STARTTLS tlsstate = 0; #endif one_last_try: /* see if we already know that this host is fried */ CurHostName = hostbuf; mci = mci_get(hostbuf, m); if (mci->mci_state != MCIS_CLOSED) { char *type; if (tTd(11, 1)) { sm_dprintf("openmailer: "); mci_dump(sm_debug_file(), mci, false); } CurHostName = mci->mci_host; if (bitnset(M_LMTP, m->m_flags)) type = "L"; else if (bitset(MCIF_ESMTP, mci->mci_flags)) type = "ES"; else type = "S"; message("Using cached %sMTP connection to %s via %s...", type, hostbuf, m->m_name); mci->mci_deliveries++; break; } mci->mci_mailer = m; #if DANE tlsa_flags = 0; if (CHK_DANE(Dane)) (void) GETTLSA(hostbuf, &ste, m->m_port); /* XXX: check expiration! */ if (ste != NULL && TLSA_RR_TEMPFAIL(ste->s_tlsa)) { if (tTd(11, 1)) sm_dprintf("skip: host=%s, TLSA_RR_lookup=%d\n" , hostbuf , ste->s_tlsa->dane_tlsa_dnsrc); tlsa_flags |= TLSAFLTEMP; } #endif /* DANE */ if (mci->mci_exitstat != EX_OK) { if (mci->mci_exitstat == EX_TEMPFAIL) goodmxfound = true; /* Try FallbackSmartHost? */ if (should_try_fbsh(e, &tried_fallbacksmarthost, hostbuf, sizeof(hostbuf), mci->mci_exitstat)) goto one_last_try; continue; } if (mci_lock_host(mci) != EX_OK) { mci_setstat(mci, EX_TEMPFAIL, "4.4.5", NULL); goodmxfound = true; continue; } /* try the connection */ sm_setproctitle(true, e, "%s %s: %s", qid_printname(e), hostbuf, "user open"); #if NETUNIX if (mux_path != NULL) { message("Connecting to %s via %s...", mux_path, m->m_name); i = makeconnection_ds((char *) mux_path, mci); } else #endif /* NETUNIX */ { if (port == 0) message("Connecting to %s via %s...", hostbuf, m->m_name); else message("Connecting to %s port %d via %s...", hostbuf, ntohs(port), m->m_name); #if DANE tlsa_flags |= (ste != NULL) ? Dane : DANE_NEVER; dane_vrfy_ctx.dane_vrfy_chk = tlsa_flags; dane_vrfy_ctx.dane_vrfy_port = m->m_port; if (tTd(11, 11)) sm_dprintf("makeconnection: before: chk=%d, mode=%lX\n", dane_vrfy_ctx.dane_vrfy_chk, tlsa_flags); #endif i = makeconnection(hostbuf, port, mci, e, enough #if DANE , &tlsa_flags #endif ); #if DANE if (tTd(11, 11)) sm_dprintf("makeconnection: after: chk=%d, mode=%lX\n", dane_vrfy_ctx.dane_vrfy_chk, tlsa_flags); if (dane_vrfy_ctx.dane_vrfy_chk != DANE_ALWAYS) dane_vrfy_ctx.dane_vrfy_chk = DANEMODE(tlsa_flags); if (EX_TEMPFAIL == i && ((tlsa_flags & (TLSAFLTEMP|DANE_SECURE)) == (TLSAFLTEMP|DANE_SECURE))) { (void) sm_strlcpy(SmtpError, " for TLSA RR", sizeof(SmtpError)); # if NAMED_BIND SM_SET_H_ERRNO(TRY_AGAIN); # endif } #endif } mci->mci_errno = errno; mci->mci_lastuse = curtime(); mci->mci_deliveries = 0; mci->mci_exitstat = i; mci_clr_extensions(mci); #if NAMED_BIND mci->mci_herrno = h_errno; #endif /* ** Have we tried long enough to get a connection? ** If yes, skip to the fallback MX hosts ** (if existent). */ if (enough > 0 && mci->mci_lastuse >= enough) { int h; #if NAMED_BIND extern int NumFallbackMXHosts; #else const int NumFallbackMXHosts = 0; #endif if (hostnum < nummxhosts && LogLevel > 9) sm_syslog(LOG_INFO, e->e_id, "Timeout.to_aconnect occurred before exhausting all addresses"); /* turn off timeout if fallback available */ if (NumFallbackMXHosts > 0) enough = 0; /* skip to a fallback MX host */ h = nummxhosts - NumFallbackMXHosts; if (hostnum < h) hostnum = h; } if (i == EX_OK) { goodmxfound = true; markstats(e, firstto, STATS_CONNECT); mci->mci_state = MCIS_OPENING; mci_cache(mci); if (TrafficLogFile != NULL) (void) sm_io_fprintf(TrafficLogFile, SM_TIME_DEFAULT, "%05d === CONNECT %s\n", (int) CurrentPid, hostbuf); break; } else { /* Try FallbackSmartHost? */ if (should_try_fbsh(e, &tried_fallbacksmarthost, hostbuf, sizeof(hostbuf), i)) goto one_last_try; if (tTd(11, 1)) sm_dprintf("openmailer: makeconnection => stat=%d, errno=%d\n", i, errno); if (i == EX_TEMPFAIL) goodmxfound = true; mci_unlock_host(mci); } /* enter status of this host */ setstat(i); /* should print some message here for -v mode */ } if (mci == NULL) { syserr("deliver: no host name"); rcode = EX_SOFTWARE; goto give_up; } mci->mci_pid = 0; } else { /* flush any expired connections */ (void) mci_scan(NULL); mci = NULL; if (bitnset(M_LMTP, m->m_flags)) { /* try to get a cached connection */ mci = mci_get(m->m_name, m); if (mci->mci_host == NULL) mci->mci_host = m->m_name; CurHostName = mci->mci_host; if (mci->mci_state != MCIS_CLOSED) { message("Using cached LMTP connection for %s...", m->m_name); mci->mci_deliveries++; goto do_transfer; } } /* announce the connection to verbose listeners */ if (host == NULL || host[0] == '\0') message("Connecting to %s...", m->m_name); else message("Connecting to %s via %s...", host, m->m_name); if (TrafficLogFile != NULL) { char **av; (void) sm_io_fprintf(TrafficLogFile, SM_TIME_DEFAULT, "%05d === EXEC", (int) CurrentPid); for (av = pv; *av != NULL; av++) (void) sm_io_fprintf(TrafficLogFile, SM_TIME_DEFAULT, " %s", *av); (void) sm_io_fprintf(TrafficLogFile, SM_TIME_DEFAULT, "\n"); } #if XDEBUG checkfd012("before creating mail pipe"); #endif /* create a pipe to shove the mail through */ if (pipe(mpvect) < 0) { syserr("%s... openmailer(%s): pipe (to mailer)", shortenstring(e->e_to, MAXSHORTSTR), m->m_name); if (tTd(11, 1)) sm_dprintf("openmailer: NULL\n"); rcode = EX_OSERR; goto give_up; } #if XDEBUG /* make sure we didn't get one of the standard I/O files */ if (mpvect[0] < 3 || mpvect[1] < 3) { syserr("%s... openmailer(%s): bogus mpvect %d %d", shortenstring(e->e_to, MAXSHORTSTR), m->m_name, mpvect[0], mpvect[1]); printopenfds(true); if (tTd(11, 1)) sm_dprintf("openmailer: NULL\n"); rcode = EX_OSERR; goto give_up; } /* make sure system call isn't dead meat */ checkfdopen(mpvect[0], "mpvect[0]"); checkfdopen(mpvect[1], "mpvect[1]"); if (mpvect[0] == mpvect[1] || (e->e_lockfp != NULL && (mpvect[0] == sm_io_getinfo(e->e_lockfp, SM_IO_WHAT_FD, NULL) || mpvect[1] == sm_io_getinfo(e->e_lockfp, SM_IO_WHAT_FD, NULL)))) { if (e->e_lockfp == NULL) syserr("%s... openmailer(%s): overlapping mpvect %d %d", shortenstring(e->e_to, MAXSHORTSTR), m->m_name, mpvect[0], mpvect[1]); else syserr("%s... openmailer(%s): overlapping mpvect %d %d, lockfp = %d", shortenstring(e->e_to, MAXSHORTSTR), m->m_name, mpvect[0], mpvect[1], sm_io_getinfo(e->e_lockfp, SM_IO_WHAT_FD, NULL)); } #endif /* XDEBUG */ /* create a return pipe */ if (pipe(rpvect) < 0) { syserr("%s... openmailer(%s): pipe (from mailer)", shortenstring(e->e_to, MAXSHORTSTR), m->m_name); (void) close(mpvect[0]); (void) close(mpvect[1]); if (tTd(11, 1)) sm_dprintf("openmailer: NULL\n"); rcode = EX_OSERR; goto give_up; } #if XDEBUG checkfdopen(rpvect[0], "rpvect[0]"); checkfdopen(rpvect[1], "rpvect[1]"); #endif /* ** Actually fork the mailer process. ** DOFORK is clever about retrying. ** ** Dispose of SIGCHLD signal catchers that may be laying ** around so that endmailer will get it. */ if (e->e_xfp != NULL) /* for debugging */ (void) sm_io_flush(e->e_xfp, SM_TIME_DEFAULT); (void) sm_io_flush(smioout, SM_TIME_DEFAULT); (void) sm_signal(SIGCHLD, SIG_DFL); DOFORK(FORK); /* pid is set by DOFORK */ if (pid < 0) { /* failure */ syserr("%s... openmailer(%s): cannot fork", shortenstring(e->e_to, MAXSHORTSTR), m->m_name); (void) close(mpvect[0]); (void) close(mpvect[1]); (void) close(rpvect[0]); (void) close(rpvect[1]); if (tTd(11, 1)) sm_dprintf("openmailer: NULL\n"); rcode = EX_OSERR; goto give_up; } else if (pid == 0) { int save_errno; int sff; int new_euid = NO_UID; int new_ruid = NO_UID; int new_gid = NO_GID; char *user = NULL; struct stat stb; extern int DtableSize; CurrentPid = getpid(); /* clear the events to turn off SIGALRMs */ sm_clear_events(); /* Reset global flags */ RestartRequest = NULL; RestartWorkGroup = false; ShutdownRequest = NULL; PendingSignal = 0; if (e->e_lockfp != NULL) (void) close(sm_io_getinfo(e->e_lockfp, SM_IO_WHAT_FD, NULL)); /* child -- set up input & exec mailer */ (void) sm_signal(SIGALRM, sm_signal_noop); (void) sm_signal(SIGCHLD, SIG_DFL); (void) sm_signal(SIGHUP, SIG_IGN); (void) sm_signal(SIGINT, SIG_IGN); (void) sm_signal(SIGTERM, SIG_DFL); #ifdef SIGUSR1 (void) sm_signal(SIGUSR1, sm_signal_noop); #endif if (m != FileMailer || stat(tochain->q_user, &stb) < 0) stb.st_mode = 0; #if HASSETUSERCONTEXT /* ** Set user resources. */ if (contextaddr != NULL) { int sucflags; struct passwd *pwd; if (contextaddr->q_ruser != NULL) pwd = sm_getpwnam(contextaddr->q_ruser); else pwd = sm_getpwnam(contextaddr->q_user); sucflags = LOGIN_SETRESOURCES|LOGIN_SETPRIORITY; # ifdef LOGIN_SETCPUMASK sucflags |= LOGIN_SETCPUMASK; # endif # ifdef LOGIN_SETLOGINCLASS sucflags |= LOGIN_SETLOGINCLASS; # endif # ifdef LOGIN_SETMAC sucflags |= LOGIN_SETMAC; # endif if (pwd != NULL && setusercontext(NULL, pwd, pwd->pw_uid, sucflags) == -1 && suidwarn) { syserr("openmailer: setusercontext() failed"); exit(EX_TEMPFAIL); } } #endif /* HASSETUSERCONTEXT */ #if HASNICE /* tweak niceness */ if (m->m_nice != 0) (void) nice(m->m_nice); #endif /* HASNICE */ /* reset group id */ if (bitnset(M_SPECIFIC_UID, m->m_flags)) { if (m->m_gid == NO_GID) new_gid = RunAsGid; else new_gid = m->m_gid; } else if (bitset(S_ISGID, stb.st_mode)) new_gid = stb.st_gid; else if (ctladdr != NULL && ctladdr->q_gid != 0) { if (!DontInitGroups) { user = ctladdr->q_ruser; if (user == NULL) user = ctladdr->q_user; if (initgroups(user, ctladdr->q_gid) == -1 && suidwarn) { syserr("openmailer: initgroups(%s, %ld) failed", user, (long) ctladdr->q_gid); exit(EX_TEMPFAIL); } } else { GIDSET_T gidset[1]; gidset[0] = ctladdr->q_gid; if (setgroups(1, gidset) == -1 && suidwarn) { syserr("openmailer: setgroups() failed"); exit(EX_TEMPFAIL); } } new_gid = ctladdr->q_gid; } else { if (!DontInitGroups) { user = DefUser; if (initgroups(DefUser, DefGid) == -1 && suidwarn) { syserr("openmailer: initgroups(%s, %ld) failed", DefUser, (long) DefGid); exit(EX_TEMPFAIL); } } else { GIDSET_T gidset[1]; gidset[0] = DefGid; if (setgroups(1, gidset) == -1 && suidwarn) { syserr("openmailer: setgroups() failed"); exit(EX_TEMPFAIL); } } if (m->m_gid == NO_GID) new_gid = DefGid; else new_gid = m->m_gid; } if (new_gid != NO_GID) { if (RunAsUid != 0 && bitnset(M_SPECIFIC_UID, m->m_flags) && new_gid != getgid() && new_gid != getegid()) { /* Only root can change the gid */ syserr("openmailer: insufficient privileges to change gid, RunAsUid=%ld, new_gid=%ld, gid=%ld, egid=%ld", (long) RunAsUid, (long) new_gid, (long) getgid(), (long) getegid()); exit(EX_TEMPFAIL); } if (setgid(new_gid) < 0 && suidwarn) { syserr("openmailer: setgid(%ld) failed", (long) new_gid); exit(EX_TEMPFAIL); } } /* change root to some "safe" directory */ if (m->m_rootdir != NULL) { expand(m->m_rootdir, cbuf, sizeof(cbuf), e); if (tTd(11, 20)) sm_dprintf("openmailer: chroot %s\n", cbuf); if (chroot(cbuf) < 0) { syserr("openmailer: Cannot chroot(%s)", cbuf); exit(EX_TEMPFAIL); } if (chdir("/") < 0) { syserr("openmailer: cannot chdir(/)"); exit(EX_TEMPFAIL); } } /* reset user id */ endpwent(); sm_mbdb_terminate(); if (bitnset(M_SPECIFIC_UID, m->m_flags)) { if (m->m_uid == NO_UID) new_euid = RunAsUid; else new_euid = m->m_uid; /* ** Undo the effects of the uid change in main ** for signal handling. The real uid may ** be used by mailer in adding a "From " ** line. */ if (RealUid != 0 && RealUid != getuid()) { #if MAILER_SETUID_METHOD == USE_SETEUID # if HASSETREUID if (setreuid(RealUid, geteuid()) < 0) { syserr("openmailer: setreuid(%d, %d) failed", (int) RealUid, (int) geteuid()); exit(EX_OSERR); } # endif /* HASSETREUID */ #endif /* MAILER_SETUID_METHOD == USE_SETEUID */ #if MAILER_SETUID_METHOD == USE_SETREUID new_ruid = RealUid; #endif } } else if (bitset(S_ISUID, stb.st_mode)) new_ruid = stb.st_uid; else if (ctladdr != NULL && ctladdr->q_uid != 0) new_ruid = ctladdr->q_uid; else if (m->m_uid != NO_UID) new_ruid = m->m_uid; else new_ruid = DefUid; #if _FFR_USE_SETLOGIN /* run disconnected from terminal and set login name */ if (setsid() >= 0 && ctladdr != NULL && ctladdr->q_uid != 0 && new_euid == ctladdr->q_uid) { struct passwd *pwd; pwd = sm_getpwuid(ctladdr->q_uid); if (pwd != NULL && suidwarn) (void) setlogin(pwd->pw_name); endpwent(); } #endif /* _FFR_USE_SETLOGIN */ if (new_euid != NO_UID) { if (RunAsUid != 0 && new_euid != RunAsUid) { /* Only root can change the uid */ syserr("openmailer: insufficient privileges to change uid, new_euid=%ld, RunAsUid=%ld", (long) new_euid, (long) RunAsUid); exit(EX_TEMPFAIL); } vendor_set_uid(new_euid); #if MAILER_SETUID_METHOD == USE_SETEUID if (seteuid(new_euid) < 0 && suidwarn) { syserr("openmailer: seteuid(%ld) failed", (long) new_euid); exit(EX_TEMPFAIL); } #endif /* MAILER_SETUID_METHOD == USE_SETEUID */ #if MAILER_SETUID_METHOD == USE_SETREUID if (setreuid(new_ruid, new_euid) < 0 && suidwarn) { syserr("openmailer: setreuid(%ld, %ld) failed", (long) new_ruid, (long) new_euid); exit(EX_TEMPFAIL); } #endif /* MAILER_SETUID_METHOD == USE_SETREUID */ #if MAILER_SETUID_METHOD == USE_SETUID if (new_euid != geteuid() && setuid(new_euid) < 0 && suidwarn) { syserr("openmailer: setuid(%ld) failed", (long) new_euid); exit(EX_TEMPFAIL); } #endif /* MAILER_SETUID_METHOD == USE_SETUID */ } else if (new_ruid != NO_UID) { vendor_set_uid(new_ruid); if (setuid(new_ruid) < 0 && suidwarn) { syserr("openmailer: setuid(%ld) failed", (long) new_ruid); exit(EX_TEMPFAIL); } } if (tTd(11, 2)) sm_dprintf("openmailer: running as r/euid=%ld/%ld, r/egid=%ld/%ld\n", (long) getuid(), (long) geteuid(), (long) getgid(), (long) getegid()); /* move into some "safe" directory */ if (m->m_execdir != NULL) { char *q; for (p = m->m_execdir; p != NULL; p = q) { q = strchr(p, ':'); if (q != NULL) *q = '\0'; expand(p, cbuf, sizeof(cbuf), e); if (q != NULL) *q++ = ':'; if (tTd(11, 20)) sm_dprintf("openmailer: trydir %s\n", cbuf); if (cbuf[0] != '\0' && chdir(cbuf) >= 0) break; } } /* Check safety of program to be run */ sff = SFF_ROOTOK|SFF_EXECOK; if (!bitnset(DBS_RUNWRITABLEPROGRAM, DontBlameSendmail)) sff |= SFF_NOGWFILES|SFF_NOWWFILES; if (bitnset(DBS_RUNPROGRAMINUNSAFEDIRPATH, DontBlameSendmail)) sff |= SFF_NOPATHCHECK; else sff |= SFF_SAFEDIRPATH; ret = safefile(m->m_mailer, getuid(), getgid(), user, sff, 0, NULL); if (ret != 0) sm_syslog(LOG_INFO, e->e_id, "Warning: program %s unsafe: %s", m->m_mailer, sm_errstring(ret)); /* arrange to filter std & diag output of command */ (void) close(rpvect[0]); if (dup2(rpvect[1], STDOUT_FILENO) < 0) { syserr("%s... openmailer(%s): cannot dup pipe %d for stdout", shortenstring(e->e_to, MAXSHORTSTR), m->m_name, rpvect[1]); _exit(EX_OSERR); } (void) close(rpvect[1]); if (dup2(STDOUT_FILENO, STDERR_FILENO) < 0) { syserr("%s... openmailer(%s): cannot dup stdout for stderr", shortenstring(e->e_to, MAXSHORTSTR), m->m_name); _exit(EX_OSERR); } /* arrange to get standard input */ (void) close(mpvect[1]); if (dup2(mpvect[0], STDIN_FILENO) < 0) { syserr("%s... openmailer(%s): cannot dup pipe %d for stdin", shortenstring(e->e_to, MAXSHORTSTR), m->m_name, mpvect[0]); _exit(EX_OSERR); } (void) close(mpvect[0]); /* arrange for all the files to be closed */ sm_close_on_exec(STDERR_FILENO + 1, DtableSize); #if !_FFR_USE_SETLOGIN /* run disconnected from terminal */ (void) setsid(); #endif /* try to execute the mailer */ (void) execve(m->m_mailer, (ARGV_T) pv, (ARGV_T) UserEnviron); save_errno = errno; syserr("Cannot exec %s", m->m_mailer); if (bitnset(M_LOCALMAILER, m->m_flags) || transienterror(save_errno)) _exit(EX_OSERR); _exit(EX_UNAVAILABLE); } /* ** Set up return value. */ if (mci == NULL) { if (clever) { /* ** Allocate from general heap, not ** envelope rpool, because this mci ** is going to be cached. */ mci = mci_new(NULL); } else { /* ** Prevent a storage leak by allocating ** this from the envelope rpool. */ mci = mci_new(e->e_rpool); } } mci->mci_mailer = m; if (clever) { mci->mci_state = MCIS_OPENING; mci_cache(mci); } else { mci->mci_state = MCIS_OPEN; } mci->mci_pid = pid; (void) close(mpvect[0]); mci->mci_out = sm_io_open(SmFtStdiofd, SM_TIME_DEFAULT, (void *) &(mpvect[1]), SM_IO_WRONLY_B, NULL); if (mci->mci_out == NULL) { syserr("deliver: cannot create mailer output channel, fd=%d", mpvect[1]); (void) close(mpvect[1]); (void) close(rpvect[0]); (void) close(rpvect[1]); rcode = EX_OSERR; goto give_up; } (void) close(rpvect[1]); mci->mci_in = sm_io_open(SmFtStdiofd, SM_TIME_DEFAULT, (void *) &(rpvect[0]), SM_IO_RDONLY_B, NULL); if (mci->mci_in == NULL) { syserr("deliver: cannot create mailer input channel, fd=%d", mpvect[1]); (void) close(rpvect[0]); (void) sm_io_close(mci->mci_out, SM_TIME_DEFAULT); mci->mci_out = NULL; rcode = EX_OSERR; goto give_up; } } /* ** If we are in SMTP opening state, send initial protocol. */ if (bitnset(M_7BITS, m->m_flags) && (!clever || mci->mci_state == MCIS_OPENING)) mci->mci_flags |= MCIF_7BIT; if (clever && mci->mci_state != MCIS_CLOSED) { #if STARTTLS || SASL char *srvname; extern SOCKADDR CurHostAddr; #endif /* STARTTLS || SASL */ #if SASL # define DONE_AUTH(f) bitset(MCIF_AUTHACT, f) #endif #if STARTTLS # define DONE_STARTTLS(f) bitset(MCIF_TLSACT, f) #endif #define ONLY_HELO(f) bitset(MCIF_ONLY_EHLO, f) #define SET_HELO(f) f |= MCIF_ONLY_EHLO #define CLR_HELO(f) f &= ~MCIF_ONLY_EHLO #if STARTTLS || SASL /* don't use CurHostName, it is changed in many places */ if (mci->mci_host != NULL) { srvname = mci->mci_host; RM_TRAIL_DOT(srvname); } else if (mci->mci_mailer != NULL) { srvname = mci->mci_mailer->m_name; dotpos = -1; } else { srvname = "local"; dotpos = -1; } /* don't set {server_name} to NULL or "": see getauth() */ macdefine(&mci->mci_macro, A_TEMP, macid("{server_name}"), srvname); /* CurHostAddr is set by makeconnection() and mci_get() */ if (CurHostAddr.sa.sa_family != 0) { macdefine(&mci->mci_macro, A_TEMP, macid("{server_addr}"), anynet_ntoa(&CurHostAddr)); } else if (mci->mci_mailer != NULL) { /* mailer name is unique, use it as address */ macdefine(&mci->mci_macro, A_PERM, macid("{server_addr}"), mci->mci_mailer->m_name); } else { /* don't set it to NULL or "": see getauth() */ macdefine(&mci->mci_macro, A_PERM, macid("{server_addr}"), "0"); } # if DANE SM_FREE(dane_vrfy_ctx.dane_vrfy_host); SM_FREE(dane_vrfy_ctx.dane_vrfy_sni); dane_vrfy_ctx.dane_vrfy_fp[0] = '\0'; if (ste != NULL && ste->s_tlsa != NULL && ste->s_tlsa->dane_tlsa_sni != NULL) dane_vrfy_ctx.dane_vrfy_sni = sm_strdup(ste->s_tlsa->dane_tlsa_sni); dane_vrfy_ctx.dane_vrfy_host = sm_strdup(srvname); # endif /* undo change of srvname (mci->mci_host) */ FIX_TRAIL_DOT(srvname); reconnect: /* after switching to an encrypted connection */ # if DANE if (DONE_STARTTLS(mci->mci_flags)) { /* use a "reset" function? */ SM_FREE(dane_vrfy_ctx.dane_vrfy_host); SM_FREE(dane_vrfy_ctx.dane_vrfy_sni); dane_vrfy_ctx.dane_vrfy_fp[0] = '\0'; dane_vrfy_ctx.dane_vrfy_res = 0; } # endif #endif /* STARTTLS || SASL */ /* set the current connection information */ e->e_mci = mci; #if SASL mci->mci_saslcap = NULL; #endif smtpinit(m, mci, e, ONLY_HELO(mci->mci_flags)); CLR_HELO(mci->mci_flags); if (IS_DLVR_RETURN(e)) { /* ** Check whether other side can deliver e-mail ** fast enough */ if (!bitset(MCIF_DLVR_BY, mci->mci_flags)) { e->e_status = "5.4.7"; usrerrenh(e->e_status, "554 Server does not support Deliver By"); rcode = EX_UNAVAILABLE; goto give_up; } if (e->e_deliver_by > 0 && e->e_deliver_by - (curtime() - e->e_ctime) < mci->mci_min_by) { e->e_status = "5.4.7"; usrerrenh(e->e_status, "554 Message can't be delivered in time; %ld < %ld", e->e_deliver_by - (long) (curtime() - e->e_ctime), mci->mci_min_by); rcode = EX_UNAVAILABLE; goto give_up; } } #if STARTTLS /* first TLS then AUTH to provide a security layer */ if (mci->mci_state != MCIS_CLOSED && !DONE_STARTTLS(mci->mci_flags)) { int olderrors; bool usetls; bool saveQuickAbort = QuickAbort; bool saveSuprErrs = SuprErrs; char *host = NULL; rcode = EX_OK; usetls = bitset(MCIF_TLS, mci->mci_flags); if (usetls) usetls = !iscltflgset(e, D_NOTLS); if (usetls) usetls = tlsstate == 0; host = macvalue(macid("{server_name}"), e); if (usetls) { olderrors = Errors; QuickAbort = false; SuprErrs = true; if (rscheck("try_tls", host, NULL, e, RSF_RMCOMM, 7, host, NOQID, NULL, NULL) != EX_OK || Errors > olderrors) { usetls = false; } SuprErrs = saveSuprErrs; QuickAbort = saveQuickAbort; } if (usetls) { if ((rcode = starttls(m, mci, e # if DANE , &dane_vrfy_ctx # endif )) == EX_OK) { /* start again without STARTTLS */ mci->mci_flags |= MCIF_TLSACT; } else { char *s; /* ** TLS negotiation failed, what to do? ** fall back to unencrypted connection ** or abort? How to decide? ** set a macro and call a ruleset. */ mci->mci_flags &= ~MCIF_TLS; switch (rcode) { case EX_TEMPFAIL: s = "TEMP"; break; case EX_USAGE: s = "USAGE"; break; case EX_PROTOCOL: s = "PROTOCOL"; break; case EX_SOFTWARE: s = "SOFTWARE"; break; case EX_UNAVAILABLE: s = "NONE"; break; /* everything else is a failure */ default: s = "FAILURE"; rcode = EX_TEMPFAIL; } macdefine(&e->e_macro, A_PERM, macid("{verify}"), s); } } else { p = tlsstate == 0 ? "NONE": "CLEAR"; # if DANE /* ** TLSA found but STARTTLS not offered? ** What is the best way to "fail"? ** XXX: check expiration! */ if (!bitset(MCIF_TLS, mci->mci_flags) && ste != NULL && ste->s_tlsa != NULL && ste->s_tlsa->dane_tlsa_n > 0) { if (LogLevel > 8) sm_syslog(LOG_NOTICE, NOQID, "STARTTLS=client, relay=%.100s, warning=DANE configured in DNS but no STARTTLS available", host); /* XXX include TLSA RR from DNS? */ p = "DANE_FAIL"; } # endif /* DANE */ macdefine(&e->e_macro, A_PERM, macid("{verify}"), p); } olderrors = Errors; QuickAbort = false; SuprErrs = true; /* ** rcode == EX_SOFTWARE is special: ** the TLS negotiation failed ** we have to drop the connection no matter what ** However, we call tls_server to give it the chance ** to log the problem and return an appropriate ** error code. */ if (rscheck("tls_server", macvalue(macid("{verify}"), e), NULL, e, RSF_RMCOMM|RSF_COUNT, 5, host, NOQID, NULL, NULL) != EX_OK || Errors > olderrors || rcode == EX_SOFTWARE) { char enhsc[ENHSCLEN]; extern char MsgBuf[]; if (ISSMTPCODE(MsgBuf) && extenhsc(MsgBuf + 4, ' ', enhsc) > 0) { p = sm_rpool_strdup_x(e->e_rpool, MsgBuf); } else { p = "403 4.7.0 server not authenticated."; (void) sm_strlcpy(enhsc, "4.7.0", sizeof(enhsc)); } SuprErrs = saveSuprErrs; QuickAbort = saveQuickAbort; if (rcode == EX_SOFTWARE) { /* drop the connection */ mci->mci_state = MCIS_QUITING; if (mci->mci_in != NULL) { (void) sm_io_close(mci->mci_in, SM_TIME_DEFAULT); mci->mci_in = NULL; } mci->mci_flags &= ~MCIF_TLSACT; (void) endmailer(mci, e, pv); if ((TLSFallbacktoClear || SM_TLSI_IS(&(mci->mci_tlsi), TLSI_FL_FB2CLR)) && !SM_TLSI_IS(&(mci->mci_tlsi), TLSI_FL_NOFB2CLR) # if DANE && dane_vrfy_ctx.dane_vrfy_chk != DANE_SECURE # endif ) { ++tlsstate; } } else { /* abort transfer */ smtpquit(m, mci, e); } /* avoid bogus error msg */ mci->mci_errno = 0; /* temp or permanent failure? */ rcode = (*p == '4') ? EX_TEMPFAIL : EX_UNAVAILABLE; mci_setstat(mci, rcode, enhsc, p); /* ** hack to get the error message into ** the envelope (done in giveresponse()) */ (void) sm_strlcpy(SmtpError, p, sizeof(SmtpError)); } else if (mci->mci_state == MCIS_CLOSED) { /* connection close caused by 421 */ mci->mci_errno = 0; rcode = EX_TEMPFAIL; mci_setstat(mci, rcode, NULL, "421"); } else rcode = 0; QuickAbort = saveQuickAbort; SuprErrs = saveSuprErrs; if (DONE_STARTTLS(mci->mci_flags) && mci->mci_state != MCIS_CLOSED) { SET_HELO(mci->mci_flags); mci_clr_extensions(mci); goto reconnect; } if (tlsstate == 1) { if (tTd(11, 1)) { sm_syslog(LOG_DEBUG, NOQID, "STARTTLS=client, relay=%.100s, tlsstate=%d, status=trying_again", mci->mci_host, tlsstate); mci_dump(NULL, mci, true); } ++tlsstate; /* ** Fake the status so a new connection is ** tried, otherwise the TLS error will ** "persist" during this delivery attempt. */ mci->mci_errno = 0; rcode = EX_OK; mci_setstat(mci, rcode, NULL, NULL); goto one_last_try; } } #endif /* STARTTLS */ #if SASL /* if other server supports authentication let's authenticate */ if (mci->mci_state != MCIS_CLOSED && mci->mci_saslcap != NULL && !DONE_AUTH(mci->mci_flags) && !iscltflgset(e, D_NOAUTH)) { /* Should we require some minimum authentication? */ if ((ret = smtpauth(m, mci, e)) == EX_OK) { int result; sasl_ssf_t *ssf = NULL; /* Get security strength (features) */ result = sasl_getprop(mci->mci_conn, SASL_SSF, # if SASL >= 20000 (const void **) &ssf); # else (void **) &ssf); # endif /* XXX authid? */ if (LogLevel > 9) sm_syslog(LOG_INFO, NOQID, "AUTH=client, relay=%.100s, mech=%.16s, bits=%d", mci->mci_host, macvalue(macid("{auth_type}"), e), result == SASL_OK ? *ssf : 0); /* ** Only switch to encrypted connection ** if a security layer has been negotiated */ if (result == SASL_OK && *ssf > 0) { int tmo; /* ** Convert I/O layer to use SASL. ** If the call fails, the connection ** is aborted. */ tmo = DATA_PROGRESS_TIMEOUT * 1000; if (sfdcsasl(&mci->mci_in, &mci->mci_out, mci->mci_conn, tmo) == 0) { mci_clr_extensions(mci); mci->mci_flags |= MCIF_AUTHACT| MCIF_ONLY_EHLO; goto reconnect; } syserr("AUTH TLS switch failed in client"); } /* else? XXX */ mci->mci_flags |= MCIF_AUTHACT; } else if (ret == EX_TEMPFAIL) { if (LogLevel > 8) sm_syslog(LOG_ERR, NOQID, "AUTH=client, relay=%.100s, temporary failure, connection abort", mci->mci_host); smtpquit(m, mci, e); /* avoid bogus error msg */ mci->mci_errno = 0; rcode = EX_TEMPFAIL; mci_setstat(mci, rcode, "4.3.0", p); /* ** hack to get the error message into ** the envelope (done in giveresponse()) */ (void) sm_strlcpy(SmtpError, "Temporary AUTH failure", sizeof(SmtpError)); } } #endif /* SASL */ } do_transfer: /* clear out per-message flags from connection structure */ mci->mci_flags &= ~(MCIF_CVT7TO8|MCIF_CVT8TO7); if (bitset(EF_HAS8BIT, e->e_flags) && !bitset(EF_DONT_MIME, e->e_flags) && bitnset(M_7BITS, m->m_flags)) mci->mci_flags |= MCIF_CVT8TO7; #if MIME7TO8 if (bitnset(M_MAKE8BIT, m->m_flags) && !bitset(MCIF_7BIT, mci->mci_flags) && (p = hvalue("Content-Transfer-Encoding", e->e_header)) != NULL && (sm_strcasecmp(p, "quoted-printable") == 0 || sm_strcasecmp(p, "base64") == 0) && (p = hvalue("Content-Type", e->e_header)) != NULL) { /* may want to convert 7 -> 8 */ /* XXX should really parse it here -- and use a class XXX */ if (sm_strncasecmp(p, "text/plain", 10) == 0 && (p[10] == '\0' || p[10] == ' ' || p[10] == ';')) mci->mci_flags |= MCIF_CVT7TO8; } #endif /* MIME7TO8 */ if (tTd(11, 1)) { sm_dprintf("openmailer: "); mci_dump(sm_debug_file(), mci, false); } #if _FFR_CLIENT_SIZE /* ** See if we know the maximum size and ** abort if the message is too big. ** ** NOTE: _FFR_CLIENT_SIZE is untested. */ if (bitset(MCIF_SIZE, mci->mci_flags) && mci->mci_maxsize > 0 && e->e_msgsize > mci->mci_maxsize) { e->e_flags |= EF_NO_BODY_RETN; if (bitnset(M_LOCALMAILER, m->m_flags)) e->e_status = "5.2.3"; else e->e_status = "5.3.4"; usrerrenh(e->e_status, "552 Message is too large; %ld bytes max", mci->mci_maxsize); rcode = EX_DATAERR; /* Need an e_message for error */ (void) sm_snprintf(SmtpError, sizeof(SmtpError), "Message is too large; %ld bytes max", mci->mci_maxsize); goto give_up; } #endif /* _FFR_CLIENT_SIZE */ if (mci->mci_state != MCIS_OPEN) { /* couldn't open the mailer */ rcode = mci->mci_exitstat; errno = mci->mci_errno; SM_SET_H_ERRNO(mci->mci_herrno); if (rcode == EX_OK) { /* shouldn't happen */ syserr("554 5.3.5 deliver: mci=%lx rcode=%d errno=%d state=%d sig=%s", (unsigned long) mci, rcode, errno, mci->mci_state, firstsig); mci_dump_all(smioout, true); rcode = EX_SOFTWARE; } else if (nummxhosts > hostnum) { /* try next MX site */ goto tryhost; } } else if (!clever) { bool ok; /* ** Format and send message. */ rcode = EX_OK; errno = 0; ok = putfromline(mci, e); if (ok) ok = (*e->e_puthdr)(mci, e->e_header, e, M87F_OUTER); if (ok) ok = (*e->e_putbody)(mci, e, NULL); if (ok && bitset(MCIF_INLONGLINE, mci->mci_flags)) ok = putline("", mci); /* ** Ignore an I/O error that was caused by EPIPE. ** Some broken mailers don't read the entire body ** but just exit() thus causing an I/O error. */ if (!ok && (sm_io_error(mci->mci_out) && errno == EPIPE)) ok = true; /* (always) get the exit status */ rcode = endmailer(mci, e, pv); if (!ok) rcode = EX_TEMPFAIL; if (rcode == EX_TEMPFAIL && SmtpError[0] == '\0') { /* ** Need an e_message for mailq display. ** We set SmtpError as */ (void) sm_snprintf(SmtpError, sizeof(SmtpError), "%s mailer (%s) exited with EX_TEMPFAIL", m->m_name, m->m_mailer); } } else { /* ** Send the MAIL FROM: protocol */ /* XXX this isn't pipelined... */ rcode = smtpmailfrom(m, mci, e); if (rcode == EX_OK) { register int i; #if PIPELINING ADDRESS *volatile pchain; #endif /* send the recipient list */ tobuf[0] = '\0'; mci->mci_retryrcpt = false; mci->mci_tolist = tobuf; #if PIPELINING pchain = NULL; mci->mci_nextaddr = NULL; #endif for (to = tochain; to != NULL; to = to->q_tchain) { if (!QS_IS_UNMARKED(to->q_state)) continue; /* mark recipient state as "ok so far" */ to->q_state = QS_OK; e->e_to = to->q_paddr; #if STARTTLS i = rscheck("tls_rcpt", to->q_user, NULL, e, RSF_RMCOMM|RSF_COUNT, 3, mci->mci_host, e->e_id, NULL, NULL); if (i != EX_OK) { markfailure(e, to, mci, i, false); giveresponse(i, to->q_status, m, mci, ctladdr, xstart, e, to); if (i == EX_TEMPFAIL) { mci->mci_retryrcpt = true; to->q_state = QS_RETRY; } continue; } #endif /* STARTTLS */ i = smtprcpt(to, m, mci, e, ctladdr, xstart); #if PIPELINING if (i == EX_OK && bitset(MCIF_PIPELINED, mci->mci_flags)) { /* ** Add new element to list of ** recipients for pipelining. */ to->q_pchain = NULL; if (mci->mci_nextaddr == NULL) mci->mci_nextaddr = to; if (pchain == NULL) pchain = to; else { pchain->q_pchain = to; pchain = pchain->q_pchain; } } #endif /* PIPELINING */ if (i != EX_OK) { markfailure(e, to, mci, i, false); giveresponse(i, to->q_status, m, mci, ctladdr, xstart, e, to); if (i == EX_TEMPFAIL) to->q_state = QS_RETRY; } } /* No recipients in list and no missing responses? */ if (tobuf[0] == '\0' #if PIPELINING && bitset(MCIF_PIPELINED, mci->mci_flags) && mci->mci_nextaddr == NULL #endif ) { rcode = EX_OK; e->e_to = NULL; if (bitset(MCIF_CACHED, mci->mci_flags)) smtprset(m, mci, e); } else { e->e_to = tobuf + 1; rcode = smtpdata(m, mci, e, ctladdr, xstart); } } if (rcode == EX_TEMPFAIL && nummxhosts > hostnum) { /* try next MX site */ goto tryhost; } } #if NAMED_BIND if (ConfigLevel < 2) _res.options |= RES_DEFNAMES | RES_DNSRCH; /* XXX */ #endif if (tTd(62, 1)) checkfds("after delivery"); /* ** Do final status disposal. ** We check for something in tobuf for the SMTP case. ** If we got a temporary failure, arrange to queue the ** addressees. */ give_up: if (bitnset(M_LMTP, m->m_flags)) { lmtp_rcode = rcode; tobuf[0] = '\0'; anyok = false; strsize = 0; } else anyok = rcode == EX_OK; for (to = tochain; to != NULL; to = to->q_tchain) { /* see if address already marked */ if (!QS_IS_OK(to->q_state)) continue; /* if running LMTP, get the status for each address */ if (bitnset(M_LMTP, m->m_flags)) { if (lmtp_rcode == EX_OK) rcode = smtpgetstat(m, mci, e); if (rcode == EX_OK) { strsize += sm_strlcat2(tobuf + strsize, ",", to->q_paddr, tobufsize - strsize); SM_ASSERT(strsize < tobufsize); anyok = true; } else { e->e_to = to->q_paddr; markfailure(e, to, mci, rcode, true); giveresponse(rcode, to->q_status, m, mci, ctladdr, xstart, e, to); e->e_to = tobuf + 1; continue; } } else { /* mark bad addresses */ if (rcode != EX_OK) { if (goodmxfound && rcode == EX_NOHOST) rcode = EX_TEMPFAIL; markfailure(e, to, mci, rcode, true); continue; } } /* successful delivery */ to->q_state = QS_SENT; to->q_statdate = curtime(); e->e_nsent++; /* ** Checkpoint the send list every few addresses */ if (CheckpointInterval > 0 && e->e_nsent >= CheckpointInterval) { queueup(e, false, false); e->e_nsent = 0; } if (bitnset(M_LOCALMAILER, m->m_flags) && bitset(QPINGONSUCCESS, to->q_flags)) { to->q_flags |= QDELIVERED; to->q_status = "2.1.5"; (void) sm_io_fprintf(e->e_xfp, SM_TIME_DEFAULT, "%s... Successfully delivered\n", to->q_paddr); } else if (bitset(QPINGONSUCCESS, to->q_flags) && bitset(QPRIMARY, to->q_flags) && !bitset(MCIF_DSN, mci->mci_flags)) { to->q_flags |= QRELAYED; (void) sm_io_fprintf(e->e_xfp, SM_TIME_DEFAULT, "%s... relayed; expect no further notifications\n", to->q_paddr); } else if (IS_DLVR_NOTIFY(e) && !bitset(MCIF_DLVR_BY, mci->mci_flags) && bitset(QPRIMARY, to->q_flags) && (!bitset(QHASNOTIFY, to->q_flags) || bitset(QPINGONSUCCESS, to->q_flags) || bitset(QPINGONFAILURE, to->q_flags) || bitset(QPINGONDELAY, to->q_flags))) { /* RFC 2852, 4.1.4.2: no NOTIFY, or not NEVER */ to->q_flags |= QBYNRELAY; (void) sm_io_fprintf(e->e_xfp, SM_TIME_DEFAULT, "%s... Deliver-by notify: relayed\n", to->q_paddr); } else if (IS_DLVR_TRACE(e) && (!bitset(QHASNOTIFY, to->q_flags) || bitset(QPINGONSUCCESS, to->q_flags) || bitset(QPINGONFAILURE, to->q_flags) || bitset(QPINGONDELAY, to->q_flags)) && bitset(QPRIMARY, to->q_flags)) { /* RFC 2852, 4.1.4: no NOTIFY, or not NEVER */ to->q_flags |= QBYTRACE; (void) sm_io_fprintf(e->e_xfp, SM_TIME_DEFAULT, "%s... Deliver-By trace: relayed\n", to->q_paddr); } } if (bitnset(M_LMTP, m->m_flags)) { /* ** Global information applies to the last recipient only; ** clear it out to avoid bogus errors. */ rcode = EX_OK; e->e_statmsg = NULL; /* reset the mci state for the next transaction */ if (mci != NULL && (mci->mci_state == MCIS_MAIL || mci->mci_state == MCIS_RCPT || mci->mci_state == MCIS_DATA)) { mci->mci_state = MCIS_OPEN; SmtpPhase = mci->mci_phase = "idle"; sm_setproctitle(true, e, "%s: %s", CurHostName, mci->mci_phase); } } if (tobuf[0] != '\0') { giveresponse(rcode, NULL, m, mci, ctladdr, xstart, e, NULL); #if 0 /* ** This code is disabled for now because I am not ** sure that copying status from the first recipient ** to all non-status'ed recipients is a good idea. */ if (tochain->q_message != NULL && !bitnset(M_LMTP, m->m_flags) && rcode != EX_OK) { for (to = tochain->q_tchain; to != NULL; to = to->q_tchain) { /* see if address already marked */ if (QS_IS_QUEUEUP(to->q_state) && to->q_message == NULL) to->q_message = sm_rpool_strdup_x(e->e_rpool, tochain->q_message); } } #endif /* 0 */ } if (anyok) markstats(e, tochain, STATS_NORMAL); mci_store_persistent(mci); #if _FFR_OCC /* ** HACK: this is NOT the right place to "close" a connection! ** use smtpquit? ** add a flag to mci to indicate that rate/conc. was increased? */ if (clever) { extern SOCKADDR CurHostAddr; /* check family... {} */ /* r = anynet_pton(AF_INET, p, dst); */ occ_close(e, mci, host, &CurHostAddr); } #endif /* _FFR_OCC */ /* Some recipients were tempfailed, try them on the next host */ if (mci != NULL && mci->mci_retryrcpt && nummxhosts > hostnum) { /* try next MX site */ goto tryhost; } /* now close the connection */ if (clever && mci != NULL && mci->mci_state != MCIS_CLOSED && !bitset(MCIF_CACHED, mci->mci_flags)) smtpquit(m, mci, e); cleanup: ; } SM_FINALLY { /* ** Restore state and return. */ #if XDEBUG char wbuf[MAXLINE]; /* make absolutely certain 0, 1, and 2 are in use */ (void) sm_snprintf(wbuf, sizeof(wbuf), "%s... end of deliver(%s)", e->e_to == NULL ? "NO-TO-LIST" : shortenstring(e->e_to, MAXSHORTSTR), m->m_name); checkfd012(wbuf); #endif /* XDEBUG */ errno = 0; /* ** It was originally necessary to set macro 'g' to NULL ** because it previously pointed to an auto buffer. ** We don't do this any more, so this may be unnecessary. */ macdefine(&e->e_macro, A_PERM, 'g', (char *) NULL); e->e_to = NULL; } SM_END_TRY return rcode; } /* ** MARKFAILURE -- mark a failure on a specific address. ** ** Parameters: ** e -- the envelope we are sending. ** q -- the address to mark. ** mci -- mailer connection information. ** rcode -- the code signifying the particular failure. ** ovr -- override an existing code? ** ** Returns: ** none. ** ** Side Effects: ** marks the address (and possibly the envelope) with the ** failure so that an error will be returned or ** the message will be queued, as appropriate. */ void markfailure(e, q, mci, rcode, ovr) register ENVELOPE *e; register ADDRESS *q; register MCI *mci; int rcode; bool ovr; { int save_errno = errno; char *status = NULL; char *rstatus = NULL; switch (rcode) { case EX_OK: break; case EX_TEMPFAIL: case EX_IOERR: case EX_OSERR: q->q_state = QS_QUEUEUP; break; default: q->q_state = QS_BADADDR; break; } /* find most specific error code possible */ if (mci != NULL && mci->mci_status != NULL) { status = sm_rpool_strdup_x(e->e_rpool, mci->mci_status); if (mci->mci_rstatus != NULL) rstatus = sm_rpool_strdup_x(e->e_rpool, mci->mci_rstatus); } else if (e->e_status != NULL) { status = e->e_status; } else { switch (rcode) { case EX_USAGE: status = "5.5.4"; break; case EX_DATAERR: status = "5.5.2"; break; case EX_NOUSER: status = "5.1.1"; break; case EX_NOHOST: status = "5.1.2"; break; case EX_NOINPUT: case EX_CANTCREAT: case EX_NOPERM: status = "5.3.0"; break; case EX_UNAVAILABLE: case EX_SOFTWARE: case EX_OSFILE: case EX_PROTOCOL: case EX_CONFIG: status = "5.5.0"; break; case EX_OSERR: case EX_IOERR: status = "4.5.0"; break; case EX_TEMPFAIL: status = "4.2.0"; break; } } /* new status? */ if (status != NULL && *status != '\0' && (ovr || q->q_status == NULL || *q->q_status == '\0' || *q->q_status < *status)) { q->q_status = status; q->q_rstatus = rstatus; } if (rcode != EX_OK && q->q_rstatus == NULL && q->q_mailer != NULL && q->q_mailer->m_diagtype != NULL && sm_strcasecmp(q->q_mailer->m_diagtype, "X-UNIX") == 0) { char buf[16]; (void) sm_snprintf(buf, sizeof(buf), "%d", rcode); q->q_rstatus = sm_rpool_strdup_x(e->e_rpool, buf); } q->q_statdate = curtime(); if (CurHostName != NULL && CurHostName[0] != '\0' && mci != NULL && !bitset(M_LOCALMAILER, mci->mci_flags)) q->q_statmta = sm_rpool_strdup_x(e->e_rpool, CurHostName); /* restore errno */ errno = save_errno; } /* ** ENDMAILER -- Wait for mailer to terminate. ** ** We should never get fatal errors (e.g., segmentation ** violation), so we report those specially. For other ** errors, we choose a status message (into statmsg), ** and if it represents an error, we print it. ** ** Parameters: ** mci -- the mailer connection info. ** e -- the current envelope. ** pv -- the parameter vector that invoked the mailer ** (for error messages). ** ** Returns: ** exit code of mailer. ** ** Side Effects: ** none. */ static jmp_buf EndWaitTimeout; static void endwaittimeout(ignore) int ignore; { /* ** NOTE: THIS CAN BE CALLED FROM A SIGNAL HANDLER. DO NOT ADD ** ANYTHING TO THIS ROUTINE UNLESS YOU KNOW WHAT YOU ARE ** DOING. */ errno = ETIMEDOUT; longjmp(EndWaitTimeout, 1); } int endmailer(mci, e, pv) register MCI *mci; register ENVELOPE *e; char **pv; { int st; int save_errno = errno; char buf[MAXLINE]; SM_EVENT *ev = NULL; mci_unlock_host(mci); /* close output to mailer */ if (mci->mci_out != NULL) { (void) sm_io_close(mci->mci_out, SM_TIME_DEFAULT); mci->mci_out = NULL; } /* copy any remaining input to transcript */ if (mci->mci_in != NULL && mci->mci_state != MCIS_ERROR && e->e_xfp != NULL) { while (sfgets(buf, sizeof(buf), mci->mci_in, TimeOuts.to_quit, "Draining Input") != NULL) (void) sm_io_fputs(e->e_xfp, SM_TIME_DEFAULT, buf); } #if SASL /* close SASL connection */ if (bitset(MCIF_AUTHACT, mci->mci_flags)) { sasl_dispose(&mci->mci_conn); mci->mci_flags &= ~MCIF_AUTHACT; } #endif /* SASL */ #if STARTTLS /* shutdown TLS */ (void) endtlsclt(mci); #endif /* now close the input */ if (mci->mci_in != NULL) { (void) sm_io_close(mci->mci_in, SM_TIME_DEFAULT); mci->mci_in = NULL; } mci->mci_state = MCIS_CLOSED; errno = save_errno; /* in the IPC case there is nothing to wait for */ if (mci->mci_pid == 0) return EX_OK; /* put a timeout around the wait */ if (mci->mci_mailer->m_wait > 0) { if (setjmp(EndWaitTimeout) == 0) ev = sm_setevent(mci->mci_mailer->m_wait, endwaittimeout, 0); else { syserr("endmailer %s: wait timeout (%ld)", mci->mci_mailer->m_name, (long) mci->mci_mailer->m_wait); return EX_TEMPFAIL; } } /* wait for the mailer process, collect status */ st = waitfor(mci->mci_pid); save_errno = errno; if (ev != NULL) sm_clrevent(ev); errno = save_errno; if (st == -1) { syserr("endmailer %s: wait", mci->mci_mailer->m_name); return EX_SOFTWARE; } if (WIFEXITED(st)) { /* normal death -- return status */ return (WEXITSTATUS(st)); } /* it died a horrid death */ syserr("451 4.3.0 mailer %s died with signal %d%s", mci->mci_mailer->m_name, WTERMSIG(st), WCOREDUMP(st) ? " (core dumped)" : (WIFSTOPPED(st) ? " (stopped)" : "")); /* log the arguments */ if (pv != NULL && e->e_xfp != NULL) { register char **av; (void) sm_io_fprintf(e->e_xfp, SM_TIME_DEFAULT, "Arguments:"); for (av = pv; *av != NULL; av++) (void) sm_io_fprintf(e->e_xfp, SM_TIME_DEFAULT, " %s", *av); (void) sm_io_fprintf(e->e_xfp, SM_TIME_DEFAULT, "\n"); } ExitStat = EX_TEMPFAIL; return EX_TEMPFAIL; } /* ** GIVERESPONSE -- Interpret an error response from a mailer ** ** Parameters: ** status -- the status code from the mailer (high byte ** only; core dumps must have been taken care of ** already). ** dsn -- the DSN associated with the address, if any. ** m -- the mailer info for this mailer. ** mci -- the mailer connection info -- can be NULL if the ** response is given before the connection is made. ** ctladdr -- the controlling address for the recipient ** address(es). ** xstart -- the transaction start time, for computing ** transaction delays. ** e -- the current envelope. ** to -- the current recipient (NULL if none). ** ** Returns: ** none. ** ** Side Effects: ** Errors may be incremented. ** ExitStat may be set. */ void giveresponse(status, dsn, m, mci, ctladdr, xstart, e, to) int status; char *dsn; register MAILER *m; register MCI *mci; ADDRESS *ctladdr; time_t xstart; ENVELOPE *e; ADDRESS *to; { register const char *statmsg; int errnum = errno; int off = 4; bool usestat = false; char dsnbuf[ENHSCLEN]; char buf[MAXLINE]; char *exmsg; if (e == NULL) { syserr("giveresponse: null envelope"); /* NOTREACHED */ SM_ASSERT(0); } /* ** Compute status message from code. */ exmsg = sm_sysexmsg(status); if (status == 0) { statmsg = "250 2.0.0 Sent"; if (e->e_statmsg != NULL) { (void) sm_snprintf(buf, sizeof(buf), "%s (%s)", statmsg, shortenstring(e->e_statmsg, 403)); statmsg = buf; } } else if (exmsg == NULL) { (void) sm_snprintf(buf, sizeof(buf), "554 5.3.0 unknown mailer error %d", status); status = EX_UNAVAILABLE; statmsg = buf; usestat = true; } else if (status == EX_TEMPFAIL) { char *bp = buf; (void) sm_strlcpy(bp, exmsg + 1, SPACELEFT(buf, bp)); bp += strlen(bp); #if NAMED_BIND if (h_errno == TRY_AGAIN) statmsg = sm_errstring(h_errno + E_DNSBASE); else #endif /* NAMED_BIND */ { if (errnum != 0) statmsg = sm_errstring(errnum); else statmsg = SmtpError; } if (statmsg != NULL && statmsg[0] != '\0') { switch (errnum) { #ifdef ENETDOWN case ENETDOWN: /* Network is down */ #endif #ifdef ENETUNREACH case ENETUNREACH: /* Network is unreachable */ #endif #ifdef ENETRESET case ENETRESET: /* Network dropped connection on reset */ #endif #ifdef ECONNABORTED case ECONNABORTED: /* Software caused connection abort */ #endif #ifdef EHOSTDOWN case EHOSTDOWN: /* Host is down */ #endif #ifdef EHOSTUNREACH case EHOSTUNREACH: /* No route to host */ #endif if (mci != NULL && mci->mci_host != NULL) { (void) sm_strlcpyn(bp, SPACELEFT(buf, bp), 2, ": ", mci->mci_host); bp += strlen(bp); } break; } (void) sm_strlcpyn(bp, SPACELEFT(buf, bp), 2, ": ", statmsg); #if DANE if (errnum == 0 && SmtpError[0] != '\0' && h_errno == TRY_AGAIN && mci->mci_exitstat == EX_TEMPFAIL) { (void) sm_strlcat(bp, SmtpError, SPACELEFT(buf, bp)); bp += strlen(bp); } #endif /* DANE */ usestat = true; } statmsg = buf; } #if NAMED_BIND else if (status == EX_NOHOST && h_errno != 0) { statmsg = sm_errstring(h_errno + E_DNSBASE); (void) sm_snprintf(buf, sizeof(buf), "%s (%s)", exmsg + 1, statmsg); statmsg = buf; usestat = true; } #endif /* NAMED_BIND */ else { statmsg = exmsg; if (*statmsg++ == ':' && errnum != 0) { (void) sm_snprintf(buf, sizeof(buf), "%s: %s", statmsg, sm_errstring(errnum)); statmsg = buf; usestat = true; } else if (bitnset(M_LMTP, m->m_flags) && e->e_statmsg != NULL) { (void) sm_snprintf(buf, sizeof(buf), "%s (%s)", statmsg, shortenstring(e->e_statmsg, 403)); statmsg = buf; usestat = true; } } /* ** Print the message as appropriate */ if (status == EX_OK || status == EX_TEMPFAIL) { extern char MsgBuf[]; if ((off = isenhsc(statmsg + 4, ' ')) > 0) { if (dsn == NULL) { (void) sm_snprintf(dsnbuf, sizeof(dsnbuf), "%.*s", off, statmsg + 4); dsn = dsnbuf; } off += 5; } else { off = 4; } message("%s", statmsg + off); if (status == EX_TEMPFAIL && e->e_xfp != NULL) (void) sm_io_fprintf(e->e_xfp, SM_TIME_DEFAULT, "%s\n", &MsgBuf[4]); } else { char mbuf[ENHSCLEN + 4]; Errors++; if ((off = isenhsc(statmsg + 4, ' ')) > 0 && off < sizeof(mbuf) - 4) { if (dsn == NULL) { (void) sm_snprintf(dsnbuf, sizeof(dsnbuf), "%.*s", off, statmsg + 4); dsn = dsnbuf; } off += 5; /* copy only part of statmsg to mbuf */ (void) sm_strlcpy(mbuf, statmsg, off); (void) sm_strlcat(mbuf, " %s", sizeof(mbuf)); } else { dsnbuf[0] = '\0'; (void) sm_snprintf(mbuf, sizeof(mbuf), "%.3s %%s", statmsg); off = 4; } usrerr(mbuf, &statmsg[off]); } /* ** Final cleanup. ** Log a record of the transaction. Compute the new ExitStat ** -- if we already had an error, stick with that. */ if (OpMode != MD_VERIFY && !bitset(EF_VRFYONLY, e->e_flags) && LogLevel > ((status == EX_TEMPFAIL) ? 8 : (status == EX_OK) ? 7 : 6)) logdelivery(m, mci, dsn, statmsg + off, ctladdr, xstart, e, to, status); if (tTd(11, 2)) sm_dprintf("giveresponse: status=%d, dsn=%s, e->e_message=%s, errnum=%d\n", status, dsn == NULL ? "" : dsn, e->e_message == NULL ? "" : e->e_message, errnum); if (status != EX_TEMPFAIL) setstat(status); if (status != EX_OK && (status != EX_TEMPFAIL || e->e_message == NULL)) e->e_message = sm_rpool_strdup_x(e->e_rpool, statmsg + off); if (status != EX_OK && to != NULL && to->q_message == NULL) { if (!usestat && e->e_message != NULL) to->q_message = sm_rpool_strdup_x(e->e_rpool, e->e_message); else to->q_message = sm_rpool_strdup_x(e->e_rpool, statmsg + off); } errno = 0; SM_SET_H_ERRNO(0); } /* ** LOGDELIVERY -- log the delivery in the system log ** ** Care is taken to avoid logging lines that are too long, because ** some versions of syslog have an unfortunate proclivity for core ** dumping. This is a hack, to be sure, that is at best empirical. ** ** Parameters: ** m -- the mailer info. Can be NULL for initial queue. ** mci -- the mailer connection info -- can be NULL if the ** log is occurring when no connection is active. ** dsn -- the DSN attached to the status. ** status -- the message to print for the status. ** ctladdr -- the controlling address for the to list. ** xstart -- the transaction start time, used for ** computing transaction delay. ** e -- the current envelope. ** to -- the current recipient (NULL if none). ** rcode -- status code ** ** Returns: ** none ** ** Side Effects: ** none */ void logdelivery(m, mci, dsn, status, ctladdr, xstart, e, to, rcode) MAILER *m; register MCI *mci; char *dsn; const char *status; ADDRESS *ctladdr; time_t xstart; register ENVELOPE *e; ADDRESS *to; int rcode; { register char *bp; register char *p; int l; time_t now = curtime(); char buf[1024]; #if (SYSLOG_BUFSIZE) >= 256 /* ctladdr: max 106 bytes */ bp = buf; if (ctladdr != NULL) { (void) sm_strlcpyn(bp, SPACELEFT(buf, bp), 2, ", ctladdr=", shortenstring(ctladdr->q_paddr, 83)); bp += strlen(bp); if (bitset(QGOODUID, ctladdr->q_flags)) { (void) sm_snprintf(bp, SPACELEFT(buf, bp), " (%d/%d)", (int) ctladdr->q_uid, (int) ctladdr->q_gid); bp += strlen(bp); } } /* delay & xdelay: max 41 bytes */ (void) sm_strlcpyn(bp, SPACELEFT(buf, bp), 2, ", delay=", pintvl(now - e->e_ctime, true)); bp += strlen(bp); if (xstart != (time_t) 0) { (void) sm_strlcpyn(bp, SPACELEFT(buf, bp), 2, ", xdelay=", pintvl(now - xstart, true)); bp += strlen(bp); } /* mailer: assume about 19 bytes (max 10 byte mailer name) */ if (m != NULL) { (void) sm_strlcpyn(bp, SPACELEFT(buf, bp), 2, ", mailer=", m->m_name); bp += strlen(bp); } # if _FFR_LOG_MORE2 LOG_MORE(buf, bp); # endif /* pri: changes with each delivery attempt */ (void) sm_snprintf(bp, SPACELEFT(buf, bp), ", pri=%ld", PRT_NONNEGL(e->e_msgpriority)); bp += strlen(bp); /* relay: max 66 bytes for IPv4 addresses */ if (mci != NULL && mci->mci_host != NULL) { extern SOCKADDR CurHostAddr; (void) sm_strlcpyn(bp, SPACELEFT(buf, bp), 2, ", relay=", shortenstring(mci->mci_host, 40)); bp += strlen(bp); if (CurHostAddr.sa.sa_family != 0) { (void) sm_snprintf(bp, SPACELEFT(buf, bp), " [%s]", anynet_ntoa(&CurHostAddr)); } } else if (strcmp(status, "quarantined") == 0) { if (e->e_quarmsg != NULL) (void) sm_snprintf(bp, SPACELEFT(buf, bp), ", quarantine=%s", shortenstring(e->e_quarmsg, 40)); } else if (strcmp(status, "queued") != 0) { p = macvalue('h', e); if (p != NULL && p[0] != '\0') { (void) sm_snprintf(bp, SPACELEFT(buf, bp), ", relay=%s", shortenstring(p, 40)); } } bp += strlen(bp); /* dsn */ if (dsn != NULL && *dsn != '\0') { (void) sm_strlcpyn(bp, SPACELEFT(buf, bp), 2, ", dsn=", shortenstring(dsn, ENHSCLEN)); bp += strlen(bp); } # if _FFR_LOG_NTRIES /* ntries */ if (e->e_ntries >= 0) { (void) sm_snprintf(bp, SPACELEFT(buf, bp), ", ntries=%d", e->e_ntries + 1); bp += strlen(bp); } # endif /* _FFR_LOG_NTRIES */ # define STATLEN (((SYSLOG_BUFSIZE) - 100) / 4) # if (STATLEN) < 63 # undef STATLEN # define STATLEN 63 # endif /* (STATLEN) < 63 */ # if (STATLEN) > 203 # undef STATLEN # define STATLEN 203 # endif /* (STATLEN) > 203 */ /* ** Notes: ** per-rcpt status: to->q_rstatus ** global status: e->e_text ** ** We (re)use STATLEN here, is that a good choice? ** ** stat=Deferred: ... ** has sometimes the same text? ** ** Note: this doesn't show the stage at which the error happened. ** can/should we log that? ** XS_* in reply() basically encodes the state. ** ** Note: in some case the normal logging might show the same server ** reply - how to avoid that? */ /* only show errors */ if (rcode != EX_OK && to != NULL && to->q_rstatus != NULL && *to->q_rstatus != '\0') { (void) sm_snprintf(bp, SPACELEFT(buf, bp), ", reply=%s", shortenstring(to->q_rstatus, STATLEN)); bp += strlen(bp); } else if (rcode != EX_OK && e->e_text != NULL) { (void) sm_snprintf(bp, SPACELEFT(buf, bp), ", reply=%d %s%s%s", e->e_rcode, e->e_renhsc, (e->e_renhsc[0] != '\0') ? " " : "", shortenstring(e->e_text, STATLEN)); bp += strlen(bp); } /* stat: max 210 bytes */ if ((bp - buf) > (sizeof(buf) - ((STATLEN) + 20))) { /* desperation move -- truncate data */ bp = buf + sizeof(buf) - ((STATLEN) + 17); (void) sm_strlcpy(bp, "...", SPACELEFT(buf, bp)); bp += 3; } (void) sm_strlcpy(bp, ", stat=", SPACELEFT(buf, bp)); bp += strlen(bp); (void) sm_strlcpy(bp, shortenstring(status, STATLEN), SPACELEFT(buf, bp)); /* id, to: max 13 + TOBUFSIZE bytes */ l = SYSLOG_BUFSIZE - 100 - strlen(buf); if (l < 0) l = 0; p = e->e_to == NULL ? "NO-TO-LIST" : e->e_to; while (strlen(p) >= l) { register char *q; for (q = p + l; q > p; q--) { /* XXX a comma in an address will break this! */ if (*q == ',') break; } if (p == q) break; sm_syslog(LOG_INFO, e->e_id, "to=%.*s [more]%s", (int) (++q - p), p, buf); p = q; } sm_syslog(LOG_INFO, e->e_id, "to=%.*s%s", l, p, buf); #else /* (SYSLOG_BUFSIZE) >= 256 */ l = SYSLOG_BUFSIZE - 85; if (l < 0) l = 0; p = e->e_to == NULL ? "NO-TO-LIST" : e->e_to; while (strlen(p) >= l) { register char *q; for (q = p + l; q > p; q--) { if (*q == ',') break; } if (p == q) break; sm_syslog(LOG_INFO, e->e_id, "to=%.*s [more]", (int) (++q - p), p); p = q; } sm_syslog(LOG_INFO, e->e_id, "to=%.*s", l, p); if (ctladdr != NULL) { bp = buf; (void) sm_strlcpyn(bp, SPACELEFT(buf, bp), 2, "ctladdr=", shortenstring(ctladdr->q_paddr, 83)); bp += strlen(bp); if (bitset(QGOODUID, ctladdr->q_flags)) { (void) sm_snprintf(bp, SPACELEFT(buf, bp), " (%d/%d)", ctladdr->q_uid, ctladdr->q_gid); bp += strlen(bp); } sm_syslog(LOG_INFO, e->e_id, "%s", buf); } bp = buf; (void) sm_strlcpyn(bp, SPACELEFT(buf, bp), 2, "delay=", pintvl(now - e->e_ctime, true)); bp += strlen(bp); if (xstart != (time_t) 0) { (void) sm_strlcpyn(bp, SPACELEFT(buf, bp), 2, ", xdelay=", pintvl(now - xstart, true)); bp += strlen(bp); } if (m != NULL) { (void) sm_strlcpyn(bp, SPACELEFT(buf, bp), 2, ", mailer=", m->m_name); bp += strlen(bp); } sm_syslog(LOG_INFO, e->e_id, "%.1000s", buf); buf[0] = '\0'; bp = buf; if (mci != NULL && mci->mci_host != NULL) { extern SOCKADDR CurHostAddr; (void) sm_snprintf(bp, SPACELEFT(buf, bp), "relay=%.100s", mci->mci_host); bp += strlen(bp); if (CurHostAddr.sa.sa_family != 0) (void) sm_snprintf(bp, SPACELEFT(buf, bp), " [%.100s]", anynet_ntoa(&CurHostAddr)); } else if (strcmp(status, "quarantined") == 0) { if (e->e_quarmsg != NULL) (void) sm_snprintf(bp, SPACELEFT(buf, bp), ", quarantine=%.100s", e->e_quarmsg); } else if (strcmp(status, "queued") != 0) { p = macvalue('h', e); if (p != NULL && p[0] != '\0') (void) sm_snprintf(buf, sizeof(buf), "relay=%.100s", p); } if (buf[0] != '\0') sm_syslog(LOG_INFO, e->e_id, "%.1000s", buf); sm_syslog(LOG_INFO, e->e_id, "stat=%s", shortenstring(status, 63)); #endif /* (SYSLOG_BUFSIZE) >= 256 */ } /* ** PUTFROMLINE -- output a UNIX-style from line (or whatever) ** ** This can be made an arbitrary message separator by changing $l ** ** One of the ugliest hacks seen by human eyes is contained herein: ** UUCP wants those stupid "remote from " lines. Why oh why ** does a well-meaning programmer such as myself have to deal with ** this kind of antique garbage???? ** ** Parameters: ** mci -- the connection information. ** e -- the envelope. ** ** Returns: ** true iff line was written successfully ** ** Side Effects: ** outputs some text to fp. */ bool putfromline(mci, e) register MCI *mci; ENVELOPE *e; { char *template = UnixFromLine; char buf[MAXLINE]; char xbuf[MAXLINE]; if (bitnset(M_NHDR, mci->mci_mailer->m_flags)) return true; mci->mci_flags |= MCIF_INHEADER; if (bitnset(M_UGLYUUCP, mci->mci_mailer->m_flags)) { char *bang; expand("\201g", buf, sizeof(buf), e); bang = strchr(buf, '!'); if (bang == NULL) { char *at; char hname[MAXNAME]; /* ** If we can construct a UUCP path, do so */ at = strrchr(buf, '@'); if (at == NULL) { expand("\201k", hname, sizeof(hname), e); at = hname; } else *at++ = '\0'; (void) sm_snprintf(xbuf, sizeof(xbuf), "From %.800s \201d remote from %.100s\n", buf, at); } else { *bang++ = '\0'; (void) sm_snprintf(xbuf, sizeof(xbuf), "From %.800s \201d remote from %.100s\n", bang, buf); template = xbuf; } } expand(template, buf, sizeof(buf), e); return putxline(buf, strlen(buf), mci, PXLF_HEADER); } /* ** PUTBODY -- put the body of a message. ** ** Parameters: ** mci -- the connection information. ** e -- the envelope to put out. ** separator -- if non-NULL, a message separator that must ** not be permitted in the resulting message. ** ** Returns: ** true iff message was written successfully ** ** Side Effects: ** The message is written onto fp. */ /* values for output state variable */ #define OSTATE_HEAD 0 /* at beginning of line */ #define OSTATE_CR 1 /* read a carriage return */ #define OSTATE_INLINE 2 /* putting rest of line */ bool putbody(mci, e, separator) register MCI *mci; register ENVELOPE *e; char *separator; { bool dead = false; bool ioerr = false; int save_errno; char buf[MAXLINE]; #if MIME8TO7 char *boundaries[MAXMIMENESTING + 1]; #endif /* ** Output the body of the message */ if (e->e_dfp == NULL && bitset(EF_HAS_DF, e->e_flags)) { char *df = queuename(e, DATAFL_LETTER); e->e_dfp = sm_io_open(SmFtStdio, SM_TIME_DEFAULT, df, SM_IO_RDONLY_B, NULL); if (e->e_dfp == NULL) { char *msg = "!putbody: Cannot open %s for %s from %s"; if (errno == ENOENT) msg++; syserr(msg, df, e->e_to, e->e_from.q_paddr); } } if (e->e_dfp == NULL) { if (bitset(MCIF_INHEADER, mci->mci_flags)) { if (!putline("", mci)) goto writeerr; mci->mci_flags &= ~MCIF_INHEADER; } if (!putline("<<< No Message Collected >>>", mci)) goto writeerr; goto endofmessage; } if (e->e_dfino == (ino_t) 0) { struct stat stbuf; if (fstat(sm_io_getinfo(e->e_dfp, SM_IO_WHAT_FD, NULL), &stbuf) < 0) e->e_dfino = -1; else { e->e_dfdev = stbuf.st_dev; e->e_dfino = stbuf.st_ino; } } /* paranoia: the data file should always be in a rewound state */ (void) bfrewind(e->e_dfp); /* simulate an I/O timeout when used as source */ if (tTd(84, 101)) sleep(319); #if MIME8TO7 if (bitset(MCIF_CVT8TO7, mci->mci_flags)) { /* ** Do 8 to 7 bit MIME conversion. */ /* make sure it looks like a MIME message */ if (hvalue("MIME-Version", e->e_header) == NULL && !putline("MIME-Version: 1.0", mci)) goto writeerr; if (hvalue("Content-Type", e->e_header) == NULL) { (void) sm_snprintf(buf, sizeof(buf), "Content-Type: text/plain; charset=%s", defcharset(e)); if (!putline(buf, mci)) goto writeerr; } /* now do the hard work */ boundaries[0] = NULL; mci->mci_flags |= MCIF_INHEADER; if (mime8to7(mci, e->e_header, e, boundaries, M87F_OUTER, 0) == SM_IO_EOF) goto writeerr; } # if MIME7TO8 else if (bitset(MCIF_CVT7TO8, mci->mci_flags)) { if (!mime7to8(mci, e->e_header, e)) goto writeerr; } # endif /* MIME7TO8 */ else if (MaxMimeHeaderLength > 0 || MaxMimeFieldLength > 0) { bool oldsuprerrs = SuprErrs; /* Use mime8to7 to check multipart for MIME header overflows */ boundaries[0] = NULL; mci->mci_flags |= MCIF_INHEADER; /* ** If EF_DONT_MIME is set, we have a broken MIME message ** and don't want to generate a new bounce message whose ** body propagates the broken MIME. We can't just not call ** mime8to7() as is done above since we need the security ** checks. The best we can do is suppress the errors. */ if (bitset(EF_DONT_MIME, e->e_flags)) SuprErrs = true; if (mime8to7(mci, e->e_header, e, boundaries, M87F_OUTER|M87F_NO8TO7, 0) == SM_IO_EOF) goto writeerr; /* restore SuprErrs */ SuprErrs = oldsuprerrs; } else #endif /* MIME8TO7 */ { int ostate; register char *bp; register char *pbp; register int c; register char *xp; int padc; char *buflim; int pos = 0; char peekbuf[12]; if (bitset(MCIF_INHEADER, mci->mci_flags)) { if (!putline("", mci)) goto writeerr; mci->mci_flags &= ~MCIF_INHEADER; } /* determine end of buffer; allow for short mailer lines */ buflim = &buf[sizeof(buf) - 1]; if (mci->mci_mailer->m_linelimit > 0 && mci->mci_mailer->m_linelimit < sizeof(buf) - 1) buflim = &buf[mci->mci_mailer->m_linelimit - 1]; /* copy temp file to output with mapping */ ostate = OSTATE_HEAD; bp = buf; pbp = peekbuf; while (!sm_io_error(mci->mci_out) && !dead) { if (pbp > peekbuf) c = *--pbp; else if ((c = sm_io_getc(e->e_dfp, SM_TIME_DEFAULT)) == SM_IO_EOF) break; if (bitset(MCIF_7BIT, mci->mci_flags)) c &= 0x7f; switch (ostate) { case OSTATE_HEAD: if (c == '\0' && bitnset(M_NONULLS, mci->mci_mailer->m_flags)) break; if (c != '\r' && c != '\n' && bp < buflim) { *bp++ = c; break; } /* check beginning of line for special cases */ *bp = '\0'; pos = 0; padc = SM_IO_EOF; if (buf[0] == 'F' && bitnset(M_ESCFROM, mci->mci_mailer->m_flags) && strncmp(buf, "From ", 5) == 0) { padc = '>'; } if (buf[0] == '-' && buf[1] == '-' && separator != NULL) { /* possible separator */ int sl = strlen(separator); if (strncmp(&buf[2], separator, sl) == 0) padc = ' '; } if (buf[0] == '.' && bitnset(M_XDOT, mci->mci_mailer->m_flags)) { padc = '.'; } /* now copy out saved line */ if (TrafficLogFile != NULL) { (void) sm_io_fprintf(TrafficLogFile, SM_TIME_DEFAULT, "%05d >>> ", (int) CurrentPid); if (padc != SM_IO_EOF) (void) sm_io_putc(TrafficLogFile, SM_TIME_DEFAULT, padc); for (xp = buf; xp < bp; xp++) (void) sm_io_putc(TrafficLogFile, SM_TIME_DEFAULT, (unsigned char) *xp); if (c == '\n') (void) sm_io_fputs(TrafficLogFile, SM_TIME_DEFAULT, mci->mci_mailer->m_eol); } if (padc != SM_IO_EOF) { if (sm_io_putc(mci->mci_out, SM_TIME_DEFAULT, padc) == SM_IO_EOF) { dead = true; continue; } pos++; } for (xp = buf; xp < bp; xp++) { if (sm_io_putc(mci->mci_out, SM_TIME_DEFAULT, (unsigned char) *xp) == SM_IO_EOF) { dead = true; break; } } if (dead) continue; if (c == '\n') { if (sm_io_fputs(mci->mci_out, SM_TIME_DEFAULT, mci->mci_mailer->m_eol) == SM_IO_EOF) break; pos = 0; } else { pos += bp - buf; if (c != '\r') { SM_ASSERT(pbp < peekbuf + sizeof(peekbuf)); *pbp++ = c; } } bp = buf; /* determine next state */ if (c == '\n') ostate = OSTATE_HEAD; else if (c == '\r') ostate = OSTATE_CR; else ostate = OSTATE_INLINE; continue; case OSTATE_CR: if (c == '\n') { /* got CRLF */ if (sm_io_fputs(mci->mci_out, SM_TIME_DEFAULT, mci->mci_mailer->m_eol) == SM_IO_EOF) continue; if (TrafficLogFile != NULL) { (void) sm_io_fputs(TrafficLogFile, SM_TIME_DEFAULT, mci->mci_mailer->m_eol); } pos = 0; ostate = OSTATE_HEAD; continue; } /* had a naked carriage return */ SM_ASSERT(pbp < peekbuf + sizeof(peekbuf)); *pbp++ = c; c = '\r'; ostate = OSTATE_INLINE; goto putch; case OSTATE_INLINE: if (c == '\r') { ostate = OSTATE_CR; continue; } if (c == '\0' && bitnset(M_NONULLS, mci->mci_mailer->m_flags)) break; putch: if (mci->mci_mailer->m_linelimit > 0 && pos >= mci->mci_mailer->m_linelimit - 1 && c != '\n') { int d; /* check next character for EOL */ if (pbp > peekbuf) d = *(pbp - 1); else if ((d = sm_io_getc(e->e_dfp, SM_TIME_DEFAULT)) != SM_IO_EOF) { SM_ASSERT(pbp < peekbuf + sizeof(peekbuf)); *pbp++ = d; } if (d == '\n' || d == SM_IO_EOF) { if (TrafficLogFile != NULL) (void) sm_io_putc(TrafficLogFile, SM_TIME_DEFAULT, (unsigned char) c); if (sm_io_putc(mci->mci_out, SM_TIME_DEFAULT, (unsigned char) c) == SM_IO_EOF) { dead = true; continue; } pos++; continue; } if (sm_io_putc(mci->mci_out, SM_TIME_DEFAULT, '!') == SM_IO_EOF || sm_io_fputs(mci->mci_out, SM_TIME_DEFAULT, mci->mci_mailer->m_eol) == SM_IO_EOF) { dead = true; continue; } if (TrafficLogFile != NULL) { (void) sm_io_fprintf(TrafficLogFile, SM_TIME_DEFAULT, "!%s", mci->mci_mailer->m_eol); } ostate = OSTATE_HEAD; SM_ASSERT(pbp < peekbuf + sizeof(peekbuf)); *pbp++ = c; continue; } if (c == '\n') { if (TrafficLogFile != NULL) (void) sm_io_fputs(TrafficLogFile, SM_TIME_DEFAULT, mci->mci_mailer->m_eol); if (sm_io_fputs(mci->mci_out, SM_TIME_DEFAULT, mci->mci_mailer->m_eol) == SM_IO_EOF) continue; pos = 0; ostate = OSTATE_HEAD; } else { if (TrafficLogFile != NULL) (void) sm_io_putc(TrafficLogFile, SM_TIME_DEFAULT, (unsigned char) c); if (sm_io_putc(mci->mci_out, SM_TIME_DEFAULT, (unsigned char) c) == SM_IO_EOF) { dead = true; continue; } pos++; ostate = OSTATE_INLINE; } break; } } /* make sure we are at the beginning of a line */ if (bp > buf) { if (TrafficLogFile != NULL) { for (xp = buf; xp < bp; xp++) (void) sm_io_putc(TrafficLogFile, SM_TIME_DEFAULT, (unsigned char) *xp); } for (xp = buf; xp < bp; xp++) { if (sm_io_putc(mci->mci_out, SM_TIME_DEFAULT, (unsigned char) *xp) == SM_IO_EOF) { dead = true; break; } } pos += bp - buf; } if (!dead && pos > 0) { if (TrafficLogFile != NULL) (void) sm_io_fputs(TrafficLogFile, SM_TIME_DEFAULT, mci->mci_mailer->m_eol); if (sm_io_fputs(mci->mci_out, SM_TIME_DEFAULT, mci->mci_mailer->m_eol) == SM_IO_EOF) goto writeerr; } } if (sm_io_error(e->e_dfp)) { syserr("putbody: %s/%cf%s: read error", qid_printqueue(e->e_dfqgrp, e->e_dfqdir), DATAFL_LETTER, e->e_id); ExitStat = EX_IOERR; ioerr = true; } endofmessage: /* ** Since mailfile() uses e_dfp in a child process, ** the file offset in the stdio library for the ** parent process will not agree with the in-kernel ** file offset since the file descriptor is shared ** between the processes. Therefore, it is vital ** that the file always be rewound. This forces the ** kernel offset (lseek) and stdio library (ftell) ** offset to match. */ save_errno = errno; if (e->e_dfp != NULL) (void) bfrewind(e->e_dfp); /* some mailers want extra blank line at end of message */ if (!dead && bitnset(M_BLANKEND, mci->mci_mailer->m_flags) && buf[0] != '\0' && buf[0] != '\n') { if (!putline("", mci)) goto writeerr; } if (!dead && (sm_io_flush(mci->mci_out, SM_TIME_DEFAULT) == SM_IO_EOF || (sm_io_error(mci->mci_out) && errno != EPIPE))) { save_errno = errno; syserr("putbody: write error"); ExitStat = EX_IOERR; ioerr = true; } errno = save_errno; return !dead && !ioerr; writeerr: return false; } /* ** MAILFILE -- Send a message to a file. ** ** If the file has the set-user-ID/set-group-ID bits set, but NO ** execute bits, sendmail will try to become the owner of that file ** rather than the real user. Obviously, this only works if ** sendmail runs as root. ** ** This could be done as a subordinate mailer, except that it ** is used implicitly to save messages in ~/dead.letter. We ** view this as being sufficiently important as to include it ** here. For example, if the system is dying, we shouldn't have ** to create another process plus some pipes to save the message. ** ** Parameters: ** filename -- the name of the file to send to. ** mailer -- mailer definition for recipient -- if NULL, ** use FileMailer. ** ctladdr -- the controlling address header -- includes ** the userid/groupid to be when sending. ** sfflags -- flags for opening. ** e -- the current envelope. ** ** Returns: ** The exit code associated with the operation. ** ** Side Effects: ** none. */ # define RETURN(st) exit(st); static jmp_buf CtxMailfileTimeout; int mailfile(filename, mailer, ctladdr, sfflags, e) char *volatile filename; MAILER *volatile mailer; ADDRESS *ctladdr; volatile long sfflags; register ENVELOPE *e; { register SM_FILE_T *f; register pid_t pid = -1; volatile int mode; int len; off_t curoff; bool suidwarn = geteuid() == 0; char *p; char *volatile realfile; SM_EVENT *ev; char buf[MAXPATHLEN]; char targetfile[MAXPATHLEN]; if (tTd(11, 1)) { sm_dprintf("mailfile %s\n ctladdr=", filename); printaddr(sm_debug_file(), ctladdr, false); } if (mailer == NULL) mailer = FileMailer; if (e->e_xfp != NULL) (void) sm_io_flush(e->e_xfp, SM_TIME_DEFAULT); /* ** Special case /dev/null. This allows us to restrict file ** delivery to regular files only. */ if (sm_path_isdevnull(filename)) return EX_OK; /* check for 8-bit available */ if (bitset(EF_HAS8BIT, e->e_flags) && bitnset(M_7BITS, mailer->m_flags) && (bitset(EF_DONT_MIME, e->e_flags) || !(bitset(MM_MIME8BIT, MimeMode) || (bitset(EF_IS_MIME, e->e_flags) && bitset(MM_CVTMIME, MimeMode))))) { e->e_status = "5.6.3"; usrerrenh(e->e_status, "554 Cannot send 8-bit data to 7-bit destination"); errno = 0; return EX_DATAERR; } /* Find the actual file */ if (SafeFileEnv != NULL && SafeFileEnv[0] != '\0') { len = strlen(SafeFileEnv); if (strncmp(SafeFileEnv, filename, len) == 0) filename += len; if (len + strlen(filename) + 1 >= sizeof(targetfile)) { syserr("mailfile: filename too long (%s/%s)", SafeFileEnv, filename); return EX_CANTCREAT; } (void) sm_strlcpy(targetfile, SafeFileEnv, sizeof(targetfile)); realfile = targetfile + len; if (*filename == '/') filename++; if (*filename != '\0') { /* paranoia: trailing / should be removed in readcf */ if (targetfile[len - 1] != '/') (void) sm_strlcat(targetfile, "/", sizeof(targetfile)); (void) sm_strlcat(targetfile, filename, sizeof(targetfile)); } } else if (mailer->m_rootdir != NULL) { expand(mailer->m_rootdir, targetfile, sizeof(targetfile), e); len = strlen(targetfile); if (strncmp(targetfile, filename, len) == 0) filename += len; if (len + strlen(filename) + 1 >= sizeof(targetfile)) { syserr("mailfile: filename too long (%s/%s)", targetfile, filename); return EX_CANTCREAT; } realfile = targetfile + len; if (targetfile[len - 1] != '/') (void) sm_strlcat(targetfile, "/", sizeof(targetfile)); if (*filename == '/') (void) sm_strlcat(targetfile, filename + 1, sizeof(targetfile)); else (void) sm_strlcat(targetfile, filename, sizeof(targetfile)); } else { if (sm_strlcpy(targetfile, filename, sizeof(targetfile)) >= sizeof(targetfile)) { syserr("mailfile: filename too long (%s)", filename); return EX_CANTCREAT; } realfile = targetfile; } /* ** Fork so we can change permissions here. ** Note that we MUST use fork, not vfork, because of ** the complications of calling subroutines, etc. */ /* ** Dispose of SIGCHLD signal catchers that may be laying ** around so that the waitfor() below will get it. */ (void) sm_signal(SIGCHLD, SIG_DFL); DOFORK(fork); if (pid < 0) return EX_OSERR; else if (pid == 0) { /* child -- actually write to file */ struct stat stb; MCI mcibuf; int err; volatile int oflags = O_WRONLY|O_APPEND; /* Reset global flags */ RestartRequest = NULL; RestartWorkGroup = false; ShutdownRequest = NULL; PendingSignal = 0; CurrentPid = getpid(); if (e->e_lockfp != NULL) { int fd; fd = sm_io_getinfo(e->e_lockfp, SM_IO_WHAT_FD, NULL); /* SM_ASSERT(fd >= 0); */ if (fd >= 0) (void) close(fd); } (void) sm_signal(SIGINT, SIG_DFL); (void) sm_signal(SIGHUP, SIG_DFL); (void) sm_signal(SIGTERM, SIG_DFL); (void) umask(OldUmask); e->e_to = filename; ExitStat = EX_OK; if (setjmp(CtxMailfileTimeout) != 0) { RETURN(EX_TEMPFAIL); } if (TimeOuts.to_fileopen > 0) ev = sm_setevent(TimeOuts.to_fileopen, mailfiletimeout, 0); else ev = NULL; /* check file mode to see if set-user-ID */ if (stat(targetfile, &stb) < 0) mode = FileMode; else mode = stb.st_mode; /* limit the errors to those actually caused in the child */ errno = 0; ExitStat = EX_OK; /* Allow alias expansions to use the S_IS{U,G}ID bits */ if ((ctladdr != NULL && !bitset(QALIAS, ctladdr->q_flags)) || bitset(SFF_RUNASREALUID, sfflags)) { /* ignore set-user-ID and set-group-ID bits */ mode &= ~(S_ISGID|S_ISUID); if (tTd(11, 20)) sm_dprintf("mailfile: ignoring set-user-ID/set-group-ID bits\n"); } /* we have to open the data file BEFORE setuid() */ if (e->e_dfp == NULL && bitset(EF_HAS_DF, e->e_flags)) { char *df = queuename(e, DATAFL_LETTER); e->e_dfp = sm_io_open(SmFtStdio, SM_TIME_DEFAULT, df, SM_IO_RDONLY_B, NULL); if (e->e_dfp == NULL) { syserr("mailfile: Cannot open %s for %s from %s", df, e->e_to, e->e_from.q_paddr); } } /* select a new user to run as */ if (!bitset(SFF_RUNASREALUID, sfflags)) { if (bitnset(M_SPECIFIC_UID, mailer->m_flags)) { RealUserName = NULL; if (mailer->m_uid == NO_UID) RealUid = RunAsUid; else RealUid = mailer->m_uid; if (RunAsUid != 0 && RealUid != RunAsUid) { /* Only root can change the uid */ syserr("mailfile: insufficient privileges to change uid, RunAsUid=%ld, RealUid=%ld", (long) RunAsUid, (long) RealUid); RETURN(EX_TEMPFAIL); } } else if (bitset(S_ISUID, mode)) { RealUserName = NULL; RealUid = stb.st_uid; } else if (ctladdr != NULL && ctladdr->q_uid != 0) { if (ctladdr->q_ruser != NULL) RealUserName = ctladdr->q_ruser; else RealUserName = ctladdr->q_user; RealUid = ctladdr->q_uid; } else if (mailer != NULL && mailer->m_uid != NO_UID) { RealUserName = DefUser; RealUid = mailer->m_uid; } else { RealUserName = DefUser; RealUid = DefUid; } /* select a new group to run as */ if (bitnset(M_SPECIFIC_UID, mailer->m_flags)) { if (mailer->m_gid == NO_GID) RealGid = RunAsGid; else RealGid = mailer->m_gid; if (RunAsUid != 0 && (RealGid != getgid() || RealGid != getegid())) { /* Only root can change the gid */ syserr("mailfile: insufficient privileges to change gid, RealGid=%ld, RunAsUid=%ld, gid=%ld, egid=%ld", (long) RealGid, (long) RunAsUid, (long) getgid(), (long) getegid()); RETURN(EX_TEMPFAIL); } } else if (bitset(S_ISGID, mode)) RealGid = stb.st_gid; else if (ctladdr != NULL && ctladdr->q_uid == DefUid && ctladdr->q_gid == 0) { /* ** Special case: This means it is an ** alias and we should act as DefaultUser. ** See alias()'s comments. */ RealGid = DefGid; RealUserName = DefUser; } else if (ctladdr != NULL && ctladdr->q_uid != 0) RealGid = ctladdr->q_gid; else if (mailer != NULL && mailer->m_gid != NO_GID) RealGid = mailer->m_gid; else RealGid = DefGid; } /* last ditch */ if (!bitset(SFF_ROOTOK, sfflags)) { if (RealUid == 0) RealUid = DefUid; if (RealGid == 0) RealGid = DefGid; } /* set group id list (needs /etc/group access) */ if (RealUserName != NULL && !DontInitGroups) { if (initgroups(RealUserName, RealGid) == -1 && suidwarn) { syserr("mailfile: initgroups(%s, %ld) failed", RealUserName, (long) RealGid); RETURN(EX_TEMPFAIL); } } else { GIDSET_T gidset[1]; gidset[0] = RealGid; if (setgroups(1, gidset) == -1 && suidwarn) { syserr("mailfile: setgroups() failed"); RETURN(EX_TEMPFAIL); } } /* ** If you have a safe environment, go into it. */ if (realfile != targetfile) { char save; save = *realfile; *realfile = '\0'; if (tTd(11, 20)) sm_dprintf("mailfile: chroot %s\n", targetfile); if (chroot(targetfile) < 0) { syserr("mailfile: Cannot chroot(%s)", targetfile); RETURN(EX_CANTCREAT); } *realfile = save; } if (tTd(11, 40)) sm_dprintf("mailfile: deliver to %s\n", realfile); if (chdir("/") < 0) { syserr("mailfile: cannot chdir(/)"); RETURN(EX_CANTCREAT); } /* now reset the group and user ids */ endpwent(); sm_mbdb_terminate(); if (setgid(RealGid) < 0 && suidwarn) { syserr("mailfile: setgid(%ld) failed", (long) RealGid); RETURN(EX_TEMPFAIL); } vendor_set_uid(RealUid); if (setuid(RealUid) < 0 && suidwarn) { syserr("mailfile: setuid(%ld) failed", (long) RealUid); RETURN(EX_TEMPFAIL); } if (tTd(11, 2)) sm_dprintf("mailfile: running as r/euid=%ld/%ld, r/egid=%ld/%ld\n", (long) getuid(), (long) geteuid(), (long) getgid(), (long) getegid()); /* move into some "safe" directory */ if (mailer->m_execdir != NULL) { char *q; for (p = mailer->m_execdir; p != NULL; p = q) { q = strchr(p, ':'); if (q != NULL) *q = '\0'; expand(p, buf, sizeof(buf), e); if (q != NULL) *q++ = ':'; if (tTd(11, 20)) sm_dprintf("mailfile: trydir %s\n", buf); if (buf[0] != '\0' && chdir(buf) >= 0) break; } } /* ** Recheck the file after we have assumed the ID of the ** delivery user to make sure we can deliver to it as ** that user. This is necessary if sendmail is running ** as root and the file is on an NFS mount which treats ** root as nobody. */ #if HASLSTAT if (bitnset(DBS_FILEDELIVERYTOSYMLINK, DontBlameSendmail)) err = stat(realfile, &stb); else err = lstat(realfile, &stb); #else /* HASLSTAT */ err = stat(realfile, &stb); #endif /* HASLSTAT */ if (err < 0) { stb.st_mode = ST_MODE_NOFILE; mode = FileMode; oflags |= O_CREAT|O_EXCL; } else if (bitset(S_IXUSR|S_IXGRP|S_IXOTH, mode) || (!bitnset(DBS_FILEDELIVERYTOHARDLINK, DontBlameSendmail) && stb.st_nlink != 1) || (realfile != targetfile && !S_ISREG(mode))) exit(EX_CANTCREAT); else mode = stb.st_mode; if (!bitnset(DBS_FILEDELIVERYTOSYMLINK, DontBlameSendmail)) sfflags |= SFF_NOSLINK; if (!bitnset(DBS_FILEDELIVERYTOHARDLINK, DontBlameSendmail)) sfflags |= SFF_NOHLINK; sfflags &= ~SFF_OPENASROOT; f = safefopen(realfile, oflags, mode, sfflags); if (f == NULL) { if (transienterror(errno)) { usrerr("454 4.3.0 cannot open %s: %s", shortenstring(realfile, MAXSHORTSTR), sm_errstring(errno)); RETURN(EX_TEMPFAIL); } else { usrerr("554 5.3.0 cannot open %s: %s", shortenstring(realfile, MAXSHORTSTR), sm_errstring(errno)); RETURN(EX_CANTCREAT); } } if (filechanged(realfile, sm_io_getinfo(f, SM_IO_WHAT_FD, NULL), &stb)) { syserr("554 5.3.0 file changed after open"); RETURN(EX_CANTCREAT); } if (fstat(sm_io_getinfo(f, SM_IO_WHAT_FD, NULL), &stb) < 0) { syserr("554 5.3.0 cannot fstat %s", sm_errstring(errno)); RETURN(EX_CANTCREAT); } curoff = stb.st_size; if (ev != NULL) sm_clrevent(ev); memset(&mcibuf, '\0', sizeof(mcibuf)); mcibuf.mci_mailer = mailer; mcibuf.mci_out = f; if (bitnset(M_7BITS, mailer->m_flags)) mcibuf.mci_flags |= MCIF_7BIT; /* clear out per-message flags from connection structure */ mcibuf.mci_flags &= ~(MCIF_CVT7TO8|MCIF_CVT8TO7); if (bitset(EF_HAS8BIT, e->e_flags) && !bitset(EF_DONT_MIME, e->e_flags) && bitnset(M_7BITS, mailer->m_flags)) mcibuf.mci_flags |= MCIF_CVT8TO7; #if MIME7TO8 if (bitnset(M_MAKE8BIT, mailer->m_flags) && !bitset(MCIF_7BIT, mcibuf.mci_flags) && (p = hvalue("Content-Transfer-Encoding", e->e_header)) != NULL && (sm_strcasecmp(p, "quoted-printable") == 0 || sm_strcasecmp(p, "base64") == 0) && (p = hvalue("Content-Type", e->e_header)) != NULL) { /* may want to convert 7 -> 8 */ /* XXX should really parse it here -- and use a class XXX */ if (sm_strncasecmp(p, "text/plain", 10) == 0 && (p[10] == '\0' || p[10] == ' ' || p[10] == ';')) mcibuf.mci_flags |= MCIF_CVT7TO8; } #endif /* MIME7TO8 */ if (!putfromline(&mcibuf, e) || !(*e->e_puthdr)(&mcibuf, e->e_header, e, M87F_OUTER) || !(*e->e_putbody)(&mcibuf, e, NULL) || !putline("\n", &mcibuf) || (sm_io_flush(f, SM_TIME_DEFAULT) != 0 || (SuperSafe != SAFE_NO && fsync(sm_io_getinfo(f, SM_IO_WHAT_FD, NULL)) < 0) || sm_io_error(f))) { setstat(EX_IOERR); #if !NOFTRUNCATE (void) ftruncate(sm_io_getinfo(f, SM_IO_WHAT_FD, NULL), curoff); #endif } /* reset ISUID & ISGID bits for paranoid systems */ #if HASFCHMOD (void) fchmod(sm_io_getinfo(f, SM_IO_WHAT_FD, NULL), (MODE_T) mode); #else /* HASFCHMOD */ (void) chmod(filename, (MODE_T) mode); #endif /* HASFCHMOD */ if (sm_io_close(f, SM_TIME_DEFAULT) < 0) setstat(EX_IOERR); (void) sm_io_flush(smioout, SM_TIME_DEFAULT); (void) setuid(RealUid); exit(ExitStat); /* NOTREACHED */ } else { /* parent -- wait for exit status */ int st; st = waitfor(pid); if (st == -1) { syserr("mailfile: %s: wait", mailer->m_name); return EX_SOFTWARE; } if (WIFEXITED(st)) { errno = 0; return (WEXITSTATUS(st)); } else { syserr("mailfile: %s: child died on signal %d", mailer->m_name, st); return EX_UNAVAILABLE; } /* NOTREACHED */ } return EX_UNAVAILABLE; /* avoid compiler warning on IRIX */ } static void mailfiletimeout(ignore) int ignore; { /* ** NOTE: THIS CAN BE CALLED FROM A SIGNAL HANDLER. DO NOT ADD ** ANYTHING TO THIS ROUTINE UNLESS YOU KNOW WHAT YOU ARE ** DOING. */ errno = ETIMEDOUT; longjmp(CtxMailfileTimeout, 1); } #if DANE /* ** GETMPORT -- return the port of a mailer ** ** Parameters: ** m -- the mailer describing this host. ** ** Returns: ** the port of the mailer if defined. ** 0 otherwise ** <0 error */ static int getmport __P((MAILER *)); static int getmport(m) MAILER *m; { unsigned long ulval; char *buf, *ep; if (m->m_port > 0) return m->m_port; if (NULL == m->m_argv[0] ||NULL == m->m_argv[1]) return -1; buf = m->m_argv[2]; if (NULL == buf) return 0; errno = 0; ulval = strtoul(buf, &ep, 0); if (buf[0] == '\0' || *ep != '\0') return -1; if (errno == ERANGE && ulval == ULONG_MAX) return -1; if (ulval > USHRT_MAX) return -1; m->m_port = (unsigned short) ulval; if (tTd(17, 30)) sm_dprintf("getmport: mailer=%s, port=%d\n", m->m_name, m->m_port); return m->m_port; } # define GETMPORT(m) getmport(m) #else /* DANE */ # define GETMPORT(m) 25 #endif /* DANE */ /* ** HOSTSIGNATURE -- return the "signature" for a host. ** ** The signature describes how we are going to send this -- it ** can be just the hostname (for non-Internet hosts) or can be ** an ordered list of MX hosts. ** ** Parameters: ** m -- the mailer describing this host. ** host -- the host name. ** ad -- DNSSEC: ad ** ** Returns: ** The signature for this host. ** ** Side Effects: ** Can tweak the symbol table. */ #define MAXHOSTSIGNATURE 8192 /* max len of hostsignature */ char * hostsignature(m, host, ad) register MAILER *m; char *host; bool ad; { register char *p; register STAB *s; time_t now; #if NAMED_BIND char sep = ':'; char prevsep = ':'; int i; int len; int nmx; int hl; char *hp; char *endp; int oldoptions = _res.options; char *mxhosts[MAXMXHOSTS + 1]; unsigned short mxprefs[MAXMXHOSTS + 1]; #endif /* NAMED_BIND */ if (tTd(17, 3)) sm_dprintf("hostsignature(%s), ad=%d\n", host, ad); /* ** If local delivery (and not remote), just return a constant. */ if (bitnset(M_LOCALMAILER, m->m_flags) && strcmp(m->m_mailer, "[IPC]") != 0 && !(m->m_argv[0] != NULL && strcmp(m->m_argv[0], "TCP") == 0)) return "localhost"; /* an empty host does not have MX records */ if (*host == '\0') return "_empty_"; /* ** Check to see if this uses IPC -- if not, it can't have MX records. */ if (strcmp(m->m_mailer, "[IPC]") != 0 || CurEnv->e_sendmode == SM_DEFER) { /* just an ordinary mailer or deferred mode */ return host; } #if NETUNIX else if (m->m_argv[0] != NULL && strcmp(m->m_argv[0], "FILE") == 0) { /* rendezvous in the file system, no MX records */ return host; } #endif /* NETUNIX */ /* ** Look it up in the symbol table. */ now = curtime(); s = stab(host, ST_HOSTSIG, ST_ENTER); if (s->s_hostsig.hs_sig != NULL) { if (s->s_hostsig.hs_exp >= now) { if (tTd(17, 3)) sm_dprintf("hostsignature(): stab(%s) found %s\n", host, s->s_hostsig.hs_sig); return s->s_hostsig.hs_sig; } /* signature is expired: clear it */ sm_free(s->s_hostsig.hs_sig); s->s_hostsig.hs_sig = NULL; } /* set default TTL */ s->s_hostsig.hs_exp = now + SM_DEFAULT_TTL; /* ** Not already there or expired -- create a signature. */ #if NAMED_BIND if (ConfigLevel < 2) _res.options &= ~(RES_DEFNAMES | RES_DNSRCH); /* XXX */ for (hp = host; hp != NULL; hp = endp) { # if NETINET6 if (*hp == '[') { endp = strchr(hp + 1, ']'); if (endp != NULL) endp = strpbrk(endp + 1, ":,"); } else endp = strpbrk(hp, ":,"); # else /* NETINET6 */ endp = strpbrk(hp, ":,"); # endif /* NETINET6 */ if (endp != NULL) { sep = *endp; *endp = '\0'; } if (bitnset(M_NOMX, m->m_flags)) { /* skip MX lookups */ nmx = 1; mxhosts[0] = hp; } else { auto int rcode; int ttl; GETMPORT(m); nmx = getmxrr(hp, mxhosts, mxprefs, DROPLOCALHOST|TRYFALLBACK|(ad ? ISAD :0), &rcode, &ttl, M_PORT(m)); if (nmx <= 0) { int save_errno; register MCI *mci; /* update the connection info for this host */ save_errno = errno; mci = mci_get(hp, m); mci->mci_errno = save_errno; mci->mci_herrno = h_errno; mci->mci_lastuse = now; if (nmx == NULLMX) mci_setstat(mci, rcode, "5.7.27", "550 Host does not accept mail"); else if (rcode == EX_NOHOST) mci_setstat(mci, rcode, "5.1.2", "550 Host unknown"); else mci_setstat(mci, rcode, NULL, NULL); /* use the original host name as signature */ nmx = 1; mxhosts[0] = hp; } if (tTd(17, 3)) sm_dprintf("hostsignature(): getmxrr() returned %d, mxhosts[0]=%s\n", nmx, mxhosts[0]); /* ** Set new TTL: we use only one! ** We could try to use the minimum instead. */ s->s_hostsig.hs_exp = now + SM_MIN(ttl, SM_DEFAULT_TTL); } len = 0; for (i = 0; i < nmx; i++) len += strlen(mxhosts[i]) + 1; if (s->s_hostsig.hs_sig != NULL) len += strlen(s->s_hostsig.hs_sig) + 1; if (len < 0 || len >= MAXHOSTSIGNATURE) { sm_syslog(LOG_WARNING, NOQID, "hostsignature for host '%s' exceeds maxlen (%d): %d", host, MAXHOSTSIGNATURE, len); len = MAXHOSTSIGNATURE; } p = sm_pmalloc_x(len); if (s->s_hostsig.hs_sig != NULL) { (void) sm_strlcpy(p, s->s_hostsig.hs_sig, len); sm_free(s->s_hostsig.hs_sig); /* XXX */ s->s_hostsig.hs_sig = p; hl = strlen(p); p += hl; *p++ = prevsep; len -= hl + 1; } else s->s_hostsig.hs_sig = p; for (i = 0; i < nmx; i++) { hl = strlen(mxhosts[i]); if (len - 1 < hl || len <= 1) { /* force to drop out of outer loop */ len = -1; break; } if (i != 0) { if (mxprefs[i] == mxprefs[i - 1]) *p++ = ','; else *p++ = ':'; len--; } (void) sm_strlcpy(p, mxhosts[i], len); p += hl; len -= hl; } /* ** break out of loop if len exceeded MAXHOSTSIGNATURE ** because we won't have more space for further hosts ** anyway (separated by : in the .cf file). */ if (len < 0) break; if (endp != NULL) *endp++ = sep; prevsep = sep; } makelower(s->s_hostsig.hs_sig); if (ConfigLevel < 2) _res.options = oldoptions; #else /* NAMED_BIND */ /* not using BIND -- the signature is just the host name */ /* ** 'host' points to storage that will be freed after we are ** done processing the current envelope, so we copy it. */ s->s_hostsig.hs_sig = sm_pstrdup_x(host); #endif /* NAMED_BIND */ if (tTd(17, 1)) sm_dprintf("hostsignature(%s) = %s\n", host, s->s_hostsig.hs_sig); return s->s_hostsig.hs_sig; } /* ** PARSE_HOSTSIGNATURE -- parse the "signature" and return MX host array. ** ** The signature describes how we are going to send this -- it ** can be just the hostname (for non-Internet hosts) or can be ** an ordered list of MX hosts which must be randomized for equal ** MX preference values. ** ** Parameters: ** sig -- the host signature. ** mxhosts -- array to populate. ** mailer -- mailer. ** ** Returns: ** The number of hosts inserted into mxhosts array. ** ** Side Effects: ** Randomizes equal MX preference hosts in mxhosts. */ static int parse_hostsignature(sig, mxhosts, mailer) char *sig; char **mxhosts; MAILER *mailer; { unsigned short curpref = 0; int nmx = 0, i, j; /* NOTE: i, j, and nmx must have same type */ char *hp, *endp; unsigned short prefer[MAXMXHOSTS]; long rndm[MAXMXHOSTS]; for (hp = sig; hp != NULL; hp = endp) { char sep = ':'; #if NETINET6 if (*hp == '[') { endp = strchr(hp + 1, ']'); if (endp != NULL) endp = strpbrk(endp + 1, ":,"); } else endp = strpbrk(hp, ":,"); #else /* NETINET6 */ endp = strpbrk(hp, ":,"); #endif /* NETINET6 */ if (endp != NULL) { sep = *endp; *endp = '\0'; } mxhosts[nmx] = hp; prefer[nmx] = curpref; if (mci_match(hp, mailer)) rndm[nmx] = 0; else rndm[nmx] = get_random(); if (endp != NULL) { /* ** Since we don't have the original MX prefs, ** make our own. If the separator is a ':', that ** means the preference for the next host will be ** higher than this one, so simply increment curpref. */ if (sep == ':') curpref++; *endp++ = sep; } if (++nmx >= MAXMXHOSTS) break; } /* sort the records using the random factor for equal preferences */ for (i = 0; i < nmx; i++) { for (j = i + 1; j < nmx; j++) { /* ** List is already sorted by MX preference, only ** need to look for equal preference MX records */ if (prefer[i] < prefer[j]) break; if (prefer[i] > prefer[j] || (prefer[i] == prefer[j] && rndm[i] > rndm[j])) { register unsigned short tempp; register long tempr; register char *temp1; tempp = prefer[i]; prefer[i] = prefer[j]; prefer[j] = tempp; temp1 = mxhosts[i]; mxhosts[i] = mxhosts[j]; mxhosts[j] = temp1; tempr = rndm[i]; rndm[i] = rndm[j]; rndm[j] = tempr; } } } return nmx; } #if STARTTLS static SSL_CTX *clt_ctx = NULL; static bool tls_ok_clt = true; /* ** SETCLTTLS -- client side TLS: allow/disallow. ** ** Parameters: ** tls_ok -- should tls be done? ** ** Returns: ** none. ** ** Side Effects: ** sets tls_ok_clt (static variable in this module) */ void setclttls(tls_ok) bool tls_ok; { tls_ok_clt = tls_ok; return; } /* ** INITCLTTLS -- initialize client side TLS ** ** Parameters: ** tls_ok -- should tls initialization be done? ** ** Returns: ** succeeded? ** ** Side Effects: ** sets tls_ok_clt (static variable in this module) */ bool initclttls(tls_ok) bool tls_ok; { if (!tls_ok_clt) return false; tls_ok_clt = tls_ok; if (!tls_ok_clt) return false; if (clt_ctx != NULL) return true; /* already done */ tls_ok_clt = inittls(&clt_ctx, TLS_I_CLT, Clt_SSL_Options, false, CltCertFile, CltKeyFile, # if _FFR_CLIENTCA (CltCACertPath != NULL) ? CltCACertPath : # endif CACertPath, # if _FFR_CLIENTCA (CltCACertFile != NULL) ? CltCACertFile : # endif CACertFile, DHParams); return tls_ok_clt; } /* ** STARTTLS -- try to start secure connection (client side) ** ** Parameters: ** m -- the mailer. ** mci -- the mailer connection info. ** e -- the envelope. ** ** Returns: ** success? ** (maybe this should be some other code than EX_ ** that denotes which stage failed.) */ static int starttls(m, mci, e # if DANE , dane_vrfy_ctx # endif ) MAILER *m; MCI *mci; ENVELOPE *e; # if DANE dane_vrfy_ctx_P dane_vrfy_ctx; # endif { int smtpresult; int result = 0; int rfd, wfd; SSL *clt_ssl = NULL; time_t tlsstart; extern int TLSsslidx; if (clt_ctx == NULL && !initclttls(true)) return EX_TEMPFAIL; if (!TLS_set_engine(SSLEngine, false)) { sm_syslog(LOG_ERR, NOQID, "STARTTLS=client, engine=%s, TLS_set_engine=failed", SSLEngine); return EX_TEMPFAIL; } smtpmessage("STARTTLS", m, mci); /* get the reply */ smtpresult = reply(m, mci, e, TimeOuts.to_starttls, NULL, NULL, XS_STARTTLS); /* check return code from server */ if (REPLYTYPE(smtpresult) == 4) return EX_TEMPFAIL; if (smtpresult == 501) return EX_USAGE; if (smtpresult == -1) return smtpresult; /* not an expected reply but we have to deal with it */ if (REPLYTYPE(smtpresult) == 5) return EX_UNAVAILABLE; if (smtpresult != 220) return EX_PROTOCOL; if (LogLevel > 13) sm_syslog(LOG_INFO, NOQID, "STARTTLS=client, start=ok"); /* start connection */ if ((clt_ssl = SSL_new(clt_ctx)) == NULL) { if (LogLevel > 5) { sm_syslog(LOG_ERR, NOQID, "STARTTLS=client, error: SSL_new failed"); tlslogerr(LOG_WARNING, 9, "client"); } return EX_SOFTWARE; } /* SSL_clear(clt_ssl); ? */ if (get_tls_se_options(e, clt_ssl, &mci->mci_tlsi, false) != 0) { sm_syslog(LOG_ERR, NOQID, "STARTTLS=client, get_tls_se_options=fail"); return EX_SOFTWARE; } result = SSL_set_ex_data(clt_ssl, TLSsslidx, &mci->mci_tlsi); if (0 == result) { if (LogLevel > 5) { sm_syslog(LOG_ERR, NOQID, "STARTTLS=client, error: SSL_set_ex_data failed=%d, idx=%d", result, TLSsslidx); tlslogerr(LOG_WARNING, 9, "client"); } return EX_SOFTWARE; } # if DANE if (SM_TLSI_IS(&(mci->mci_tlsi), TLSI_FL_NODANE)) dane_vrfy_ctx->dane_vrfy_chk = DANE_NEVER; else { int r; # define SM_IS_EMPTY(s) (NULL == (s) || '\0' == *(s)) /* set SNI only if there is a TLSA RR */ if (dane_get_tlsa(dane_vrfy_ctx) != NULL && !(SM_IS_EMPTY(dane_vrfy_ctx->dane_vrfy_host) && SM_IS_EMPTY(dane_vrfy_ctx->dane_vrfy_sni)) && (r = SSL_set_tlsext_host_name(clt_ssl, (!SM_IS_EMPTY(dane_vrfy_ctx->dane_vrfy_sni) ? dane_vrfy_ctx->dane_vrfy_sni : dane_vrfy_ctx->dane_vrfy_host))) <= 0) { if (LogLevel > 5) { sm_syslog(LOG_ERR, NOQID, "STARTTLS=client, host=%s, SSL_set_tlsext_host_name=%d", dane_vrfy_ctx->dane_vrfy_host, r); } tlslogerr(LOG_ERR, 5, "client"); /* return EX_SOFTWARE; */ } } memcpy(&mci->mci_tlsi.tlsi_dvc, dane_vrfy_ctx, sizeof(*dane_vrfy_ctx)); # endif /* DANE */ rfd = sm_io_getinfo(mci->mci_in, SM_IO_WHAT_FD, NULL); wfd = sm_io_getinfo(mci->mci_out, SM_IO_WHAT_FD, NULL); if (rfd < 0 || wfd < 0 || (result = SSL_set_rfd(clt_ssl, rfd)) != 1 || (result = SSL_set_wfd(clt_ssl, wfd)) != 1) { if (LogLevel > 5) { sm_syslog(LOG_ERR, NOQID, "STARTTLS=client, error: SSL_set_xfd failed=%d", result); tlslogerr(LOG_WARNING, 9, "client"); } return EX_SOFTWARE; } SSL_set_connect_state(clt_ssl); tlsstart = curtime(); ssl_retry: if ((result = SSL_connect(clt_ssl)) <= 0) { int i, ssl_err; int save_errno = errno; ssl_err = SSL_get_error(clt_ssl, result); i = tls_retry(clt_ssl, rfd, wfd, tlsstart, TimeOuts.to_starttls, ssl_err, "client"); if (i > 0) goto ssl_retry; if (LogLevel > 5) { unsigned long l; const char *sr; l = ERR_peek_error(); sr = ERR_reason_error_string(l); sm_syslog(LOG_WARNING, NOQID, "STARTTLS=client, error: connect failed=%d, reason=%s, SSL_error=%d, errno=%d, retry=%d", result, sr == NULL ? "unknown" : sr, ssl_err, save_errno, i); tlslogerr(LOG_WARNING, 9, "client"); } SM_SSL_FREE(clt_ssl); return EX_SOFTWARE; } mci->mci_ssl = clt_ssl; result = tls_get_info(mci->mci_ssl, false, mci->mci_host, &mci->mci_macro, true); /* switch to use TLS... */ if (sfdctls(&mci->mci_in, &mci->mci_out, mci->mci_ssl) == 0) return EX_OK; /* failure */ SM_SSL_FREE(clt_ssl); return EX_SOFTWARE; } /* ** ENDTLSCLT -- shutdown secure connection (client side) ** ** Parameters: ** mci -- the mailer connection info. ** ** Returns: ** success? */ static int endtlsclt(mci) MCI *mci; { int r; if (!bitset(MCIF_TLSACT, mci->mci_flags)) return EX_OK; r = endtls(&mci->mci_ssl, "client"); mci->mci_flags &= ~MCIF_TLSACT; return r; } #endif /* STARTTLS */ #if STARTTLS || SASL /* ** ISCLTFLGSET -- check whether client flag is set. ** ** Parameters: ** e -- envelope. ** flag -- flag to check in {client_flags} ** ** Returns: ** true iff flag is set. */ static bool iscltflgset(e, flag) ENVELOPE *e; int flag; { char *p; p = macvalue(macid("{client_flags}"), e); if (p == NULL) return false; for (; *p != '\0'; p++) { /* look for just this one flag */ if (*p == (char) flag) return true; } return false; } #endif /* STARTTLS || SASL */