/* * Copyright (c) 2000-2001, 2004 Proofpoint, Inc. and its suppliers. * All rights reserved. * Copyright (c) 1990 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Chris Torek. * * By using this file, you agree to the terms and conditions set * forth in the LICENSE file which can be found at the top level of * the sendmail distribution. */ #include SM_IDSTR(id, "@(#)$Id: vfprintf.c,v 1.55 2013-11-22 20:51:44 ca Exp $") /* ** Overall: ** Actual printing innards. ** This code is large and complicated... */ #include #include #include #include #include #include #include #include #include #include "local.h" #include "fvwrite.h" static int sm_bprintf __P((SM_FILE_T *, const char *, va_list)); static void sm_find_arguments __P((const char *, va_list , va_list **)); static void sm_grow_type_table_x __P((unsigned char **, int *)); static int sm_print __P((SM_FILE_T *, int, struct sm_uio *)); /* ** SM_PRINT -- print/flush to the file ** ** Flush out all the vectors defined by the given uio, ** then reset it so that it can be reused. ** ** Parameters: ** fp -- file pointer ** timeout -- time to complete operation (milliseconds) ** uio -- vector list of memory locations of data for printing ** ** Results: ** Success: 0 (zero) ** Failure: */ static int sm_print(fp, timeout, uio) SM_FILE_T *fp; int timeout; register struct sm_uio *uio; { register int err; if (uio->uio_resid == 0) { uio->uio_iovcnt = 0; return 0; } err = sm_fvwrite(fp, timeout, uio); uio->uio_resid = 0; uio->uio_iovcnt = 0; return err; } /* ** SM_BPRINTF -- allow formatting to an unbuffered file. ** ** Helper function for `fprintf to unbuffered unix file': creates a ** temporary buffer (via a "fake" file pointer). ** We only work on write-only files; this avoids ** worries about ungetc buffers and so forth. ** ** Parameters: ** fp -- the file to send the o/p to ** fmt -- format instructions for the o/p ** ap -- vectors of data units used for formatting ** ** Results: ** Failure: SM_IO_EOF and errno set ** Success: number of data units used in the formatting ** ** Side effects: ** formatted o/p can be SM_IO_BUFSIZ length maximum */ static int sm_bprintf(fp, fmt, ap) SM_FILE_T *fp; const char *fmt; va_list ap; { int ret; SM_FILE_T fake; unsigned char buf[SM_IO_BUFSIZ]; extern const char SmFileMagic[]; /* copy the important variables */ fake.sm_magic = SmFileMagic; fake.f_timeout = SM_TIME_FOREVER; fake.f_timeoutstate = SM_TIME_BLOCK; fake.f_flags = fp->f_flags & ~SMNBF; fake.f_file = fp->f_file; fake.f_cookie = fp->f_cookie; fake.f_write = fp->f_write; fake.f_close = NULL; fake.f_open = NULL; fake.f_read = NULL; fake.f_seek = NULL; fake.f_setinfo = fake.f_getinfo = NULL; fake.f_type = "sm_bprintf:fake"; /* set up the buffer */ fake.f_bf.smb_base = fake.f_p = buf; fake.f_bf.smb_size = fake.f_w = sizeof(buf); fake.f_lbfsize = 0; /* not actually used, but Just In Case */ /* do the work, then copy any error status */ ret = sm_io_vfprintf(&fake, SM_TIME_FOREVER, fmt, ap); if (ret >= 0 && sm_io_flush(&fake, SM_TIME_FOREVER)) ret = SM_IO_EOF; /* errno set by sm_io_flush */ if (fake.f_flags & SMERR) fp->f_flags |= SMERR; return ret; } #define BUF 40 #define STATIC_ARG_TBL_SIZE 8 /* Size of static argument table. */ /* Macros for converting digits to letters and vice versa */ #define to_digit(c) ((c) - '0') #define is_digit(c) ((unsigned) to_digit(c) <= 9) #define to_char(n) ((char) (n) + '0') /* Flags used during conversion. */ #define ALT 0x001 /* alternate form */ #define HEXPREFIX 0x002 /* add 0x or 0X prefix */ #define LADJUST 0x004 /* left adjustment */ #define LONGINT 0x010 /* long integer */ #define QUADINT 0x020 /* quad integer */ #define SHORTINT 0x040 /* short integer */ #define ZEROPAD 0x080 /* zero (as opposed to blank) pad */ #define FPT 0x100 /* Floating point number */ /* ** SM_IO_VFPRINTF -- performs actual formatting for o/p ** ** Parameters: ** fp -- file pointer for o/p ** timeout -- time to complete the print ** fmt0 -- formatting directives ** ap -- vectors with data units for formatting ** ** Results: ** Success: number of data units used for formatting ** Failure: SM_IO_EOF and sets errno */ int sm_io_vfprintf(fp, timeout, fmt0, ap) SM_FILE_T *fp; int timeout; const char *fmt0; va_list ap; { register char *fmt; /* format string */ register int ch; /* character from fmt */ register int n, m, n2; /* handy integers (short term usage) */ register char *cp; /* handy char pointer (short term usage) */ register struct sm_iov *iovp;/* for PRINT macro */ register int flags; /* flags as above */ int ret; /* return value accumulator */ int width; /* width from format (%8d), or 0 */ int prec; /* precision from format (%.3d), or -1 */ char sign; /* sign prefix (' ', '+', '-', or \0) */ wchar_t wc; ULONGLONG_T _uquad; /* integer arguments %[diouxX] */ enum { OCT, DEC, HEX } base;/* base for [diouxX] conversion */ int dprec; /* a copy of prec if [diouxX], 0 otherwise */ int realsz; /* field size expanded by dprec */ int size; /* size of converted field or string */ char *xdigs="0123456789abcdef"; /* digits for [xX] conversion */ #define NIOV 8 struct sm_uio uio; /* output information: summary */ struct sm_iov iov[NIOV];/* ... and individual io vectors */ char buf[BUF]; /* space for %c, %[diouxX], %[eEfgG] */ char ox[2]; /* space for 0x hex-prefix */ va_list *argtable; /* args, built due to positional arg */ va_list statargtable[STATIC_ARG_TBL_SIZE]; int nextarg; /* 1-based argument index */ va_list orgap; /* original argument pointer */ /* ** Choose PADSIZE to trade efficiency vs. size. If larger printf ** fields occur frequently, increase PADSIZE and make the initialisers ** below longer. */ #define PADSIZE 16 /* pad chunk size */ static char blanks[PADSIZE] = {' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' '}; static char zeroes[PADSIZE] = {'0','0','0','0','0','0','0','0','0','0','0','0','0','0','0','0'}; /* ** BEWARE, these `goto error' on error, and PAD uses `n'. */ #define PRINT(ptr, len) do { \ iovp->iov_base = (ptr); \ iovp->iov_len = (len); \ uio.uio_resid += (len); \ iovp++; \ if (++uio.uio_iovcnt >= NIOV) \ { \ if (sm_print(fp, timeout, &uio)) \ goto error; \ iovp = iov; \ } \ } while (0) #define PAD(howmany, with) do \ { \ if ((n = (howmany)) > 0) \ { \ while (n > PADSIZE) { \ PRINT(with, PADSIZE); \ n -= PADSIZE; \ } \ PRINT(with, n); \ } \ } while (0) #define FLUSH() do \ { \ if (uio.uio_resid && sm_print(fp, timeout, &uio)) \ goto error; \ uio.uio_iovcnt = 0; \ iovp = iov; \ } while (0) /* ** To extend shorts properly, we need both signed and unsigned ** argument extraction methods. */ #define SARG() \ (flags&QUADINT ? SM_VA_ARG(ap, LONGLONG_T) : \ flags&LONGINT ? GETARG(long) : \ flags&SHORTINT ? (long) (short) GETARG(int) : \ (long) GETARG(int)) #define UARG() \ (flags&QUADINT ? SM_VA_ARG(ap, ULONGLONG_T) : \ flags&LONGINT ? GETARG(unsigned long) : \ flags&SHORTINT ? (unsigned long) (unsigned short) GETARG(int) : \ (unsigned long) GETARG(unsigned int)) /* ** Get * arguments, including the form *nn$. Preserve the nextarg ** that the argument can be gotten once the type is determined. */ #define GETASTER(val) \ n2 = 0; \ cp = fmt; \ while (is_digit(*cp)) \ { \ n2 = 10 * n2 + to_digit(*cp); \ cp++; \ } \ if (*cp == '$') \ { \ int hold = nextarg; \ if (argtable == NULL) \ { \ argtable = statargtable; \ sm_find_arguments(fmt0, orgap, &argtable); \ } \ nextarg = n2; \ val = GETARG(int); \ nextarg = hold; \ fmt = ++cp; \ } \ else \ { \ val = GETARG(int); \ } /* ** Get the argument indexed by nextarg. If the argument table is ** built, use it to get the argument. If its not, get the next ** argument (and arguments must be gotten sequentially). */ #if SM_VA_STD # define GETARG(type) \ (((argtable != NULL) ? (void) (ap = argtable[nextarg]) : (void) 0), \ nextarg++, SM_VA_ARG(ap, type)) #else /* SM_VA_STD */ # define GETARG(type) \ ((argtable != NULL) ? (*((type*)(argtable[nextarg++]))) : \ (nextarg++, SM_VA_ARG(ap, type))) #endif /* SM_VA_STD */ /* sorry, fprintf(read_only_file, "") returns SM_IO_EOF, not 0 */ if (cantwrite(fp)) { errno = EBADF; return SM_IO_EOF; } /* optimise fprintf(stderr) (and other unbuffered Unix files) */ if ((fp->f_flags & (SMNBF|SMWR|SMRW)) == (SMNBF|SMWR) && fp->f_file >= 0) return sm_bprintf(fp, fmt0, ap); fmt = (char *) fmt0; argtable = NULL; nextarg = 1; SM_VA_COPY(orgap, ap); uio.uio_iov = iovp = iov; uio.uio_resid = 0; uio.uio_iovcnt = 0; ret = 0; /* Scan the format for conversions (`%' character). */ for (;;) { cp = fmt; n = 0; while ((wc = *fmt) != '\0') { if (wc == '%') { n = 1; break; } fmt++; } if ((m = fmt - cp) != 0) { PRINT(cp, m); ret += m; } if (n <= 0) goto done; fmt++; /* skip over '%' */ flags = 0; dprec = 0; width = 0; prec = -1; sign = '\0'; rflag: ch = *fmt++; reswitch: switch (ch) { case ' ': /* ** ``If the space and + flags both appear, the space ** flag will be ignored.'' ** -- ANSI X3J11 */ if (!sign) sign = ' '; goto rflag; case '#': flags |= ALT; goto rflag; case '*': /* ** ``A negative field width argument is taken as a ** - flag followed by a positive field width.'' ** -- ANSI X3J11 ** They don't exclude field widths read from args. */ GETASTER(width); if (width >= 0) goto rflag; width = -width; /* FALLTHROUGH */ case '-': flags |= LADJUST; goto rflag; case '+': sign = '+'; goto rflag; case '.': if ((ch = *fmt++) == '*') { GETASTER(n); prec = n < 0 ? -1 : n; goto rflag; } n = 0; while (is_digit(ch)) { n = 10 * n + to_digit(ch); ch = *fmt++; } if (ch == '$') { nextarg = n; if (argtable == NULL) { argtable = statargtable; sm_find_arguments(fmt0, orgap, &argtable); } goto rflag; } prec = n < 0 ? -1 : n; goto reswitch; case '0': /* ** ``Note that 0 is taken as a flag, not as the ** beginning of a field width.'' ** -- ANSI X3J11 */ flags |= ZEROPAD; goto rflag; case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': n = 0; do { n = 10 * n + to_digit(ch); ch = *fmt++; } while (is_digit(ch)); if (ch == '$') { nextarg = n; if (argtable == NULL) { argtable = statargtable; sm_find_arguments(fmt0, orgap, &argtable); } goto rflag; } width = n; goto reswitch; case 'h': flags |= SHORTINT; goto rflag; case 'l': if (*fmt == 'l') { fmt++; flags |= QUADINT; } else { flags |= LONGINT; } goto rflag; case 'q': flags |= QUADINT; goto rflag; case 'c': *(cp = buf) = GETARG(int); size = 1; sign = '\0'; break; case 'D': flags |= LONGINT; /*FALLTHROUGH*/ case 'd': case 'i': _uquad = SARG(); if ((LONGLONG_T) _uquad < 0) { _uquad = -(LONGLONG_T) _uquad; sign = '-'; } base = DEC; goto number; case 'e': case 'E': case 'f': case 'g': case 'G': { double val; char *p; char fmt[16]; char out[150]; size_t len; /* ** This code implements floating point output ** in the most portable manner possible, ** relying only on 'sprintf' as defined by ** the 1989 ANSI C standard. ** We silently cap width and precision ** at 120, to avoid buffer overflow. */ val = GETARG(double); p = fmt; *p++ = '%'; if (sign) *p++ = sign; if (flags & ALT) *p++ = '#'; if (flags & LADJUST) *p++ = '-'; if (flags & ZEROPAD) *p++ = '0'; *p++ = '*'; if (prec >= 0) { *p++ = '.'; *p++ = '*'; } *p++ = ch; *p = '\0'; if (width > 120) width = 120; if (prec > 120) prec = 120; if (prec >= 0) #if HASSNPRINTF snprintf(out, sizeof(out), fmt, width, prec, val); #else sprintf(out, fmt, width, prec, val); #endif else #if HASSNPRINTF snprintf(out, sizeof(out), fmt, width, val); #else sprintf(out, fmt, width, val); #endif len = strlen(out); PRINT(out, len); FLUSH(); continue; } case 'n': if (flags & QUADINT) *GETARG(LONGLONG_T *) = ret; else if (flags & LONGINT) *GETARG(long *) = ret; else if (flags & SHORTINT) *GETARG(short *) = ret; else *GETARG(int *) = ret; continue; /* no output */ case 'O': flags |= LONGINT; /*FALLTHROUGH*/ case 'o': _uquad = UARG(); base = OCT; goto nosign; case 'p': /* ** ``The argument shall be a pointer to void. The ** value of the pointer is converted to a sequence ** of printable characters, in an implementation- ** defined manner.'' ** -- ANSI X3J11 */ /* NOSTRICT */ { union { void *p; ULONGLONG_T ll; unsigned long l; unsigned i; } u; u.p = GETARG(void *); if (sizeof(void *) == sizeof(ULONGLONG_T)) _uquad = u.ll; else if (sizeof(void *) == sizeof(long)) _uquad = u.l; else _uquad = u.i; } base = HEX; xdigs = "0123456789abcdef"; flags |= HEXPREFIX; ch = 'x'; goto nosign; case 's': if ((cp = GETARG(char *)) == NULL) cp = "(null)"; if (prec >= 0) { /* ** can't use strlen; can only look for the ** NUL in the first `prec' characters, and ** strlen() will go further. */ char *p = memchr(cp, 0, prec); if (p != NULL) { size = p - cp; if (size > prec) size = prec; } else size = prec; } else size = strlen(cp); sign = '\0'; break; case 'U': flags |= LONGINT; /*FALLTHROUGH*/ case 'u': _uquad = UARG(); base = DEC; goto nosign; case 'X': xdigs = "0123456789ABCDEF"; goto hex; case 'x': xdigs = "0123456789abcdef"; hex: _uquad = UARG(); base = HEX; /* leading 0x/X only if non-zero */ if (flags & ALT && _uquad != 0) flags |= HEXPREFIX; /* unsigned conversions */ nosign: sign = '\0'; /* ** ``... diouXx conversions ... if a precision is ** specified, the 0 flag will be ignored.'' ** -- ANSI X3J11 */ number: if ((dprec = prec) >= 0) flags &= ~ZEROPAD; /* ** ``The result of converting a zero value with an ** explicit precision of zero is no characters.'' ** -- ANSI X3J11 */ cp = buf + BUF; if (_uquad != 0 || prec != 0) { /* ** Unsigned mod is hard, and unsigned mod ** by a constant is easier than that by ** a variable; hence this switch. */ switch (base) { case OCT: do { *--cp = to_char(_uquad & 7); _uquad >>= 3; } while (_uquad); /* handle octal leading 0 */ if (flags & ALT && *cp != '0') *--cp = '0'; break; case DEC: /* many numbers are 1 digit */ while (_uquad >= 10) { *--cp = to_char(_uquad % 10); _uquad /= 10; } *--cp = to_char(_uquad); break; case HEX: do { *--cp = xdigs[_uquad & 15]; _uquad >>= 4; } while (_uquad); break; default: cp = "bug in sm_io_vfprintf: bad base"; size = strlen(cp); goto skipsize; } } size = buf + BUF - cp; skipsize: break; default: /* "%?" prints ?, unless ? is NUL */ if (ch == '\0') goto done; /* pretend it was %c with argument ch */ cp = buf; *cp = ch; size = 1; sign = '\0'; break; } /* ** All reasonable formats wind up here. At this point, `cp' ** points to a string which (if not flags&LADJUST) should be ** padded out to `width' places. If flags&ZEROPAD, it should ** first be prefixed by any sign or other prefix; otherwise, ** it should be blank padded before the prefix is emitted. ** After any left-hand padding and prefixing, emit zeroes ** required by a decimal [diouxX] precision, then print the ** string proper, then emit zeroes required by any leftover ** floating precision; finally, if LADJUST, pad with blanks. ** ** Compute actual size, so we know how much to pad. ** size excludes decimal prec; realsz includes it. */ realsz = dprec > size ? dprec : size; if (sign) realsz++; else if (flags & HEXPREFIX) realsz+= 2; /* right-adjusting blank padding */ if ((flags & (LADJUST|ZEROPAD)) == 0) PAD(width - realsz, blanks); /* prefix */ if (sign) { PRINT(&sign, 1); } else if (flags & HEXPREFIX) { ox[0] = '0'; ox[1] = ch; PRINT(ox, 2); } /* right-adjusting zero padding */ if ((flags & (LADJUST|ZEROPAD)) == ZEROPAD) PAD(width - realsz, zeroes); /* leading zeroes from decimal precision */ PAD(dprec - size, zeroes); /* the string or number proper */ PRINT(cp, size); /* left-adjusting padding (always blank) */ if (flags & LADJUST) PAD(width - realsz, blanks); /* finally, adjust ret */ ret += width > realsz ? width : realsz; FLUSH(); /* copy out the I/O vectors */ } done: FLUSH(); error: SM_VA_END_COPY(orgap); if ((argtable != NULL) && (argtable != statargtable)) sm_free(argtable); return sm_error(fp) ? SM_IO_EOF : ret; /* NOTREACHED */ } /* Type ids for argument type table. */ #define T_UNUSED 0 #define T_SHORT 1 #define T_U_SHORT 2 #define TP_SHORT 3 #define T_INT 4 #define T_U_INT 5 #define TP_INT 6 #define T_LONG 7 #define T_U_LONG 8 #define TP_LONG 9 #define T_QUAD 10 #define T_U_QUAD 11 #define TP_QUAD 12 #define T_DOUBLE 13 #define TP_CHAR 15 #define TP_VOID 16 /* ** SM_FIND_ARGUMENTS -- find all args when a positional parameter is found. ** ** Find all arguments when a positional parameter is encountered. Returns a ** table, indexed by argument number, of pointers to each arguments. The ** initial argument table should be an array of STATIC_ARG_TBL_SIZE entries. ** It will be replaced with a malloc-ed one if it overflows. ** ** Parameters: ** fmt0 -- formatting directives ** ap -- vector list of data unit for formatting consumption ** argtable -- an indexable table (returned) of 'ap' ** ** Results: ** none. */ static void sm_find_arguments(fmt0, ap, argtable) const char *fmt0; va_list ap; va_list **argtable; { register char *fmt; /* format string */ register int ch; /* character from fmt */ register int n, n2; /* handy integer (short term usage) */ register char *cp; /* handy char pointer (short term usage) */ register int flags; /* flags as above */ unsigned char *typetable; /* table of types */ unsigned char stattypetable[STATIC_ARG_TBL_SIZE]; int tablesize; /* current size of type table */ int tablemax; /* largest used index in table */ int nextarg; /* 1-based argument index */ /* Add an argument type to the table, expanding if necessary. */ #define ADDTYPE(type) \ ((nextarg >= tablesize) ? \ (sm_grow_type_table_x(&typetable, &tablesize), 0) : 0, \ typetable[nextarg++] = type, \ (nextarg > tablemax) ? tablemax = nextarg : 0) #define ADDSARG() \ ((flags & LONGINT) ? ADDTYPE(T_LONG) : \ ((flags & SHORTINT) ? ADDTYPE(T_SHORT) : ADDTYPE(T_INT))) #define ADDUARG() \ ((flags & LONGINT) ? ADDTYPE(T_U_LONG) : \ ((flags & SHORTINT) ? ADDTYPE(T_U_SHORT) : ADDTYPE(T_U_INT))) /* Add * arguments to the type array. */ #define ADDASTER() \ n2 = 0; \ cp = fmt; \ while (is_digit(*cp)) \ { \ n2 = 10 * n2 + to_digit(*cp); \ cp++; \ } \ if (*cp == '$') \ { \ int hold = nextarg; \ nextarg = n2; \ ADDTYPE (T_INT); \ nextarg = hold; \ fmt = ++cp; \ } \ else \ { \ ADDTYPE (T_INT); \ } fmt = (char *) fmt0; typetable = stattypetable; tablesize = STATIC_ARG_TBL_SIZE; tablemax = 0; nextarg = 1; (void) memset(typetable, T_UNUSED, STATIC_ARG_TBL_SIZE); /* Scan the format for conversions (`%' character). */ for (;;) { for (cp = fmt; (ch = *fmt) != '\0' && ch != '%'; fmt++) /* void */; if (ch == '\0') goto done; fmt++; /* skip over '%' */ flags = 0; rflag: ch = *fmt++; reswitch: switch (ch) { case ' ': case '#': goto rflag; case '*': ADDASTER(); goto rflag; case '-': case '+': goto rflag; case '.': if ((ch = *fmt++) == '*') { ADDASTER(); goto rflag; } while (is_digit(ch)) { ch = *fmt++; } goto reswitch; case '0': goto rflag; case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': n = 0; do { n = 10 * n + to_digit(ch); ch = *fmt++; } while (is_digit(ch)); if (ch == '$') { nextarg = n; goto rflag; } goto reswitch; case 'h': flags |= SHORTINT; goto rflag; case 'l': flags |= LONGINT; goto rflag; case 'q': flags |= QUADINT; goto rflag; case 'c': ADDTYPE(T_INT); break; case 'D': flags |= LONGINT; /*FALLTHROUGH*/ case 'd': case 'i': if (flags & QUADINT) { ADDTYPE(T_QUAD); } else { ADDSARG(); } break; case 'e': case 'E': case 'f': case 'g': case 'G': ADDTYPE(T_DOUBLE); break; case 'n': if (flags & QUADINT) ADDTYPE(TP_QUAD); else if (flags & LONGINT) ADDTYPE(TP_LONG); else if (flags & SHORTINT) ADDTYPE(TP_SHORT); else ADDTYPE(TP_INT); continue; /* no output */ case 'O': flags |= LONGINT; /*FALLTHROUGH*/ case 'o': if (flags & QUADINT) ADDTYPE(T_U_QUAD); else ADDUARG(); break; case 'p': ADDTYPE(TP_VOID); break; case 's': ADDTYPE(TP_CHAR); break; case 'U': flags |= LONGINT; /*FALLTHROUGH*/ case 'u': if (flags & QUADINT) ADDTYPE(T_U_QUAD); else ADDUARG(); break; case 'X': case 'x': if (flags & QUADINT) ADDTYPE(T_U_QUAD); else ADDUARG(); break; default: /* "%?" prints ?, unless ? is NUL */ if (ch == '\0') goto done; break; } } done: /* Build the argument table. */ if (tablemax >= STATIC_ARG_TBL_SIZE) { *argtable = (va_list *) sm_malloc(sizeof(va_list) * (tablemax + 1)); } for (n = 1; n <= tablemax; n++) { SM_VA_COPY((*argtable)[n], ap); switch (typetable [n]) { case T_UNUSED: (void) SM_VA_ARG(ap, int); break; case T_SHORT: (void) SM_VA_ARG(ap, int); break; case T_U_SHORT: (void) SM_VA_ARG(ap, int); break; case TP_SHORT: (void) SM_VA_ARG(ap, short *); break; case T_INT: (void) SM_VA_ARG(ap, int); break; case T_U_INT: (void) SM_VA_ARG(ap, unsigned int); break; case TP_INT: (void) SM_VA_ARG(ap, int *); break; case T_LONG: (void) SM_VA_ARG(ap, long); break; case T_U_LONG: (void) SM_VA_ARG(ap, unsigned long); break; case TP_LONG: (void) SM_VA_ARG(ap, long *); break; case T_QUAD: (void) SM_VA_ARG(ap, LONGLONG_T); break; case T_U_QUAD: (void) SM_VA_ARG(ap, ULONGLONG_T); break; case TP_QUAD: (void) SM_VA_ARG(ap, LONGLONG_T *); break; case T_DOUBLE: (void) SM_VA_ARG(ap, double); break; case TP_CHAR: (void) SM_VA_ARG(ap, char *); break; case TP_VOID: (void) SM_VA_ARG(ap, void *); break; } SM_VA_END_COPY((*argtable)[n]); } if ((typetable != NULL) && (typetable != stattypetable)) sm_free(typetable); } /* ** SM_GROW_TYPE_TABLE -- Increase the size of the type table. ** ** Parameters: ** tabletype -- type of table to grow ** tablesize -- requested new table size ** ** Results: ** Raises an exception if can't allocate memory. */ static void sm_grow_type_table_x(typetable, tablesize) unsigned char **typetable; int *tablesize; { unsigned char *oldtable = *typetable; int newsize = *tablesize * 2; if (*tablesize == STATIC_ARG_TBL_SIZE) { *typetable = (unsigned char *) sm_malloc_x(sizeof(unsigned char) * newsize); (void) memmove(*typetable, oldtable, *tablesize); } else { *typetable = (unsigned char *) sm_realloc_x(typetable, sizeof(unsigned char) * newsize); } (void) memset(&typetable [*tablesize], T_UNUSED, (newsize - *tablesize)); *tablesize = newsize; }