.\" Copyright (c) 2009-2016 Roy Marples
.\" All rights reserved
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.Dd April 28, 2016
.Dt RESOLVCONF.CONF 5
.Os
.Sh NAME
.Nm resolvconf.conf
.Nd resolvconf configuration file
.Sh DESCRIPTION
.Nm
is the configuration file for
.Xr resolvconf 8 .
The
.Nm
file is a shell script that is sourced by
.Xr resolvconf 8 ,
meaning that
.Nm
must contain valid shell commands.
Listed below are the standard
.Nm
variables that may be set.
If the values contain whitespace, wildcards or other special shell characters,
ensure they are quoted and escaped correctly.
See the
.Sy replace
variable for an example on quoting.
.Pp
After updating this file, you may wish to run
.Nm resolvconf -u
to apply the new configuration.
.Pp
When a dynamically generated list is appended or prepended to, the whole
is made unique where left-most wins.
.Sh RESOLVCONF OPTIONS
.Bl -tag -width indent
.It Sy resolvconf
Set to NO to disable
.Nm resolvconf
from running any subscribers.
Defaults to YES.
.It Sy interface_order
These interfaces will always be processed first.
If unset, defaults to the following:-
.D1 lo lo[0-9]*
.It Sy dynamic_order
These interfaces will be processed next, unless they have a metric.
If unset, defaults to the following:-
.D1 tap[0-9]* tun[0-9]* vpn vpn[0-9]* ppp[0-9]* ippp[0-9]*
.It Sy local_nameservers
If unset, defaults to the following:-
.D1 127.* 0.0.0.0 255.255.255.255 ::1
.It Sy search_domains
Prepend search domains to the dynamically generated list.
.It Sy search_domains_append
Append search domains to the dynamically generated list.
.It Sy domain_blacklist
A list of domains to be removed from consideration.
To remove a domain, you can use foo.*
To remove a sub domain, you can use *.bar
.It Sy name_servers
Prepend name servers to the dynamically generated list.
You should set this to 127.0.0.1 if you use a local name server other than
libc.
.It Sy name_servers_append
Append name servers to the dynamically generated list.
.It Sy name_server_blacklist
A list of name servers to be removed from consideration.
The default is 0.0.0.0 as some faulty routers send it via DHCP.
To remove a block, you can use 192.168.*
.It Sy private_interfaces
These interfaces name servers will only be queried for the domains listed
in their resolv.conf.
Useful for VPN domains.
Setting
.Sy private_interfaces Ns ="*"
will stop the forwarding of the root zone and allows the local resolver to
recursively query the root servers directly.
Requires a local nameserver other than libc.
This is equivalent to the
.Nm resolvconf -p
option.
.It Sy replace
Is a space separated list of replacement keywords.
The syntax is this:
.Va $keyword Ns / Ns Va $match Ns / Ns Va $replacement
.Pp
Example, given this resolv.conf:
.D1 domain foo.org
.D1 search foo.org dead.beef
.D1 nameserver 1.2.3.4
.D1 nameserver 2.3.4.5
and this configuaration:
.D1 replace="search/foo*/bar.com nameserver/1.2.3.4/5.6.7.8 nameserver/2.3.4.5/"
you would get this resolv.conf instead:
.D1 domain foo.org
.D1 search bar.com
.D1 nameserver 5.6.7.8
.It Sy replace_sub
Works the same way as
.Sy replace
except it works on each space separated value rather than the whole line,
so it's useful for the replacing a single domain within the search directive.
Using the same example resolv.conf and changing
.Sy replace
to
.Sy replace_sub ,
you would get this resolv.conf instead:
.D1 domain foo.org
.D1 search bar.com dead.beef
.D1 nameserver 5.6.7.8
.It Sy state_dir
Override the default state directory of
.Pa @VARDIR@ .
This should not be changed once
.Nm resolvconf
is in use unless the old directory is copied to the new one.
.El
.Sh LIBC OPTIONS
The following variables affect
.Xr resolv.conf 5
directly:-
.Bl -tag -width indent
.It Sy resolv_conf
Defaults to
.Pa /etc/resolv.conf
if not set.
.It Sy resolv_conf_options
A list of libc resolver options, as specified in
.Xr resolv.conf 5 .
.It Sy resolv_conf_passthrough
When set to YES the latest resolv.conf is written to
.Sy resolv_conf
without any alteration.
When set to /dev/null or NULL,
.Sy resolv_conf_local_only
is defaulted to NO,
.Sy local_nameservers
is unset unless overridden and only the information set in
.Nm
is written to
.Sy resolv_conf .
.It Sy resolv_conf_sortlist
A libc resolver sortlist, as specified in
.Xr resolv.conf 5 .
.It Sy resolv_conf_local_only
If a local name server is configured then the default is just to specify that
and ignore all other entries as they will be configured for the local
name server.
Set this to NO to also list non-local nameservers.
This will give you working DNS even if the local nameserver stops functioning
at the expense of duplicated server queries.
.It Sy append_nameservers
Append name servers to the dynamically generated list.
.It Sy prepend_nameservers
Prepend name servers to the dynamically generated list.
.It Sy append_search
Append search domains to the dynamically generated list.
.It Sy prepend_search
Prepend search domains to the dynamically generated list.
.El
.Sh SUBSCRIBER OPTIONS
openresolv ships with subscribers for the name servers
.Xr dnsmasq 8 ,
.Xr named 8 ,
.Xr pdnsd 8
and
.Xr unbound 8 .
Each subscriber can create configuration files which should be included in
in the subscribers main configuration file.
.Pp
To disable a subscriber, simply set it's name to NO.
For example, to disable the libc subscriber you would set:
.D1 libc=NO
.Bl -tag -width indent
.It Sy dnsmasq_conf
This file tells dnsmasq which name servers to use for specific domains.
.It Sy dnsmasq_resolv
This file tells dnsmasq which name servers to use for global lookups.
.Pp
Example resolvconf.conf for dnsmasq:
.D1 name_servers=127.0.0.1
.D1 dnsmasq_conf=/etc/dnsmasq-conf.conf
.D1 dnsmasq_resolv=/etc/dnsmasq-resolv.conf
.Pp
Example dnsmasq.conf:
.D1 listen-address=127.0.0.1
.D1 # If dnsmasq is compiled for DBus then we can take
.D1 # advantage of not having to restart dnsmasq.
.D1 enable-dbus
.D1 conf-file=/etc/dnsmasq-conf.conf
.D1 resolv-file=/etc/dnsmasq-resolv.conf
.It Sy named_options
Include this file in the named options block.
This file tells named which name servers to use for global lookups.
.It Sy named_zones
Include this file in the named global scope, after the options block.
This file tells named which name servers to use for specific domains.
.Pp
Example resolvconf.conf for named:
.D1 name_servers=127.0.0.1
.D1 named_options=/etc/named-options.conf
.D1 named_zones=/etc/named-zones.conf
.Pp
Example named.conf:
.D1 options {
.D1 	listen-on { 127.0.0.1; };
.D1 	include "/etc/named-options.conf";
.D1 };
.D1 include "/etc/named-zones.conf";
.It Sy pdnsd_conf
This is the main pdnsd configuration file which we modify to add our
forward domains to.
If this variable is not set then we rely on the pdnsd configuration file
setup to read
.Pa pdnsd_resolv
as documented below.
.It Sy pdnsd_resolv
This file tells pdnsd about global name servers.
If this variable is not set then it's written to
.Pa pdnsd_conf .
.Pp
Example resolvconf.conf for pdnsd:
.D1 name_servers=127.0.0.1
.D1 pdnsd_conf=/etc/pdnsd.conf
.D1 # pdnsd_resolv=/etc/pdnsd-resolv.conf
.Pp
Example pdnsd.conf:
.D1 global {
.D1 	server_ip = 127.0.0.1;
.D1 	status_ctl = on;
.D1 }
.D1 server {
.D1 	# A server definition is required, even if emtpy.
.D1 	label="empty";
.D1 	proxy_only=on;
.D1 	# file="/etc/pdnsd-resolv.conf";
.D1 }
.It Sy unbound_conf
This file tells unbound about specific and global name servers.
.It Sy unbound_insecure
When set to YES, unbound marks the domains as insecure, thus ignoring DNSSEC.
.Pp
Example resolvconf.conf for unbound:
.D1 name_servers=127.0.0.1
.D1 unbound_conf=/etc/unbound-resolvconf.conf
.Pp
Example unbound.conf:
.D1 include: /etc/unbound-resolvconf.conf
.El
.Sh SUBSCRIBER INTEGRATION
Not all distributions store the files the subscribers need in the same
locations.
For example, named service scripts have been called named, bind and rc.bind
and they could be located in a directory called /etc/rc.d, /etc/init.d or
similar.
Each subscriber attempts to automatically configure itself, but not every
distribution has been catered for.
Also, users could equally want to use a different version from the one
installed by default, such as bind8 and bind9.
To accommodate this, the subscribers have these files in configurable
variables, documented below.
.Pp
.Bl -tag -width indent
.It Sy dnsmasq_service
Name of the dnsmasq service.
.It Sy dnsmasq_restart
Command to restart the dnsmasq service.
.It Sy dnsmasq_pid
Location of the dnsmasq pidfile.
.It Sy libc_service
Name of the libc service.
.It Sy libc_restart
Command to restart the libc service.
.It Sy named_service
Name of the named service.
.It Sy named_restart
Command to restart the named service.
.It Sy pdnsd_restart
Command to restart the pdnsd service.
.It Sy unbound_service
Name of the unbound service.
.It Sy unbound_restart
Command to restart the unbound service.
.It Sy unbound_pid
Location of the unbound pidfile.
.El
.Sh SEE ALSO
.Xr sh 1 ,
.Xr resolv.conf 5 ,
.Xr resolvconf 8
.Sh AUTHORS
.An Roy Marples Aq Mt roy@marples.name
.Sh BUGS
Each distribution is a special snowflake and likes to name the same thing
differently, namely the named service script.
.Pp
Please report them to
.Lk http://roy.marples.name/projects/openresolv