.\" Copyright (c) 2012 The FreeBSD Foundation
.\" All rights reserved.
.\"
.\" This documentation was written by Pawel Jakub Dawidek under sponsorship
.\" from the FreeBSD Foundation.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd March 22, 2011
.Dt AUDITDISTD.CONF 5
.Os
.Sh NAME
.Nm auditdistd.conf
.Nd configuration file for the
.Xr auditdistd 8
daemon.
.Sh DESCRIPTION
Note: the configuration file may contain passwords.
Care should be taken to configure proper permissions on this file
.Li ( eg. 0600 ) .
.Pp
Every line starting with # is treated as comment and ignored.
.Sh CONFIGURATION FILE SYNTAX
General syntax of the
.Nm
file is following:
.Bd -literal -offset
## Global section.

# Our name.
# The default is first part of the hostname.
name "<name>"

# Connection timeout.
# The default is 5.
timeout <seconds>

# Path to pidfile.
# The default is "/var/run/auditdistd.pid".
pidfile "<path>"

sender {
	## Sender section.

	# Source address for connections.
	# Optional.
	source "<addr>"

	# Directory with audit trail files managed by auditdistd.
	# The default is /var/audit/dist.
	directory "<dir>"
.\"
.\"	# Checksum algorithm for data send over the wire.
.\"	# The default is none.
.\"	checksum "<algorithm>"
.\"
.\"	# Compression algorithm for data send over the wire.
.\"	# The default is none.
.\"	compression "<algorithm>"

	# Configuration for the target system we want to send audit trail
	# files to.
	host "<name>" {
		# Source address for connections.
		# Optional.
		source "<addr>"

		# Address of auditdistd receiver.
		# No default. Obligatory.
		remote "<addr>"

		# Directory with audit trail files managed by auditdistd.
		# The default is /var/audit/dist.
		directory "<dir>"

		# Fingerprint of the receiver's public key when using TLS
		# for connection.
		# Example fingerprint:
		# SHA256=8F:0A:FC:8A:3D:09:80:AF:D9:AA:38:CC:8A:86:53:E6:8F:B6:1C:55:30:14:D7:F9:AA:8B:3E:73:CD:F5:76:2B
		fingerprint "<algorithm=hash>"

		# Password used to authenticate in front of the receiver.
		password "<password>"
.\"
.\"		# Checksum algorithm for data send over the wire.
.\"		# The default is none.
.\"		checksum "<algorithm>"
.\"
.\"		# Compression algorithm for data send over the wire.
.\"		# The default is none.
.\"		compression "<algorithm>"
	}

	# Currently local audit trail files can be send only to one remote
	# auditdistd receiver, but this can change in the future.
}

receiver {
	## Receiver section.

	# Address to listen on. Multiple listen addresses might be specified.
	# The defaults are "tcp4://0.0.0.0:7878" and "tcp6://[::]:7878".
	listen "<addr>"

	# Base directory.
	# If directory in host section is no absolute, it will be concatenated
	# with this base directory.
	# The default is "/var/audit/remote".
	directory "<basedir>"

	# Path to receiver's certificate file.
	# The default is "/etc/security/auditdistd.cert.pem".
	certfile "<path>"

	# Path to receiver's private key file.
	# The default is "/etc/security/auditdistd.key.pem".
	keyfile "<path>"

	# Configuration for a source system we want to receive audit trail
	# files from.
	host "<name>" {
		# Sender address.
		# No default. Obligatory.
		remote "<addr>"

		# Directory where to store audit trail files received
		# from system <name>.
		# The default is "<basedir>/<name>".
		directory "<dir>"

		# Password used by the sender to authenticate.
		password "<password>"
	}

	# Multiple hosts to receive from can be configured.
}
.Ed
.Pp
Most of the various available configuration parameters are optional.
If parameter is not defined in the particular section, it will be
inherited from the parent section if possible.
For example, if the
.Ic source
parameter is not defined in the
.Ic host
section, it will be inherited from the
.Ic sender
section.
In case the
.Ic global
section does not define the
.Ic source
parameter at all, the default value will be used.
.Sh CONFIGURATION FILE DESCRIPTION
The following statements are available:
.Bl -tag -width ".Ic xxxx"
.It Ic name Aq name
.Pp
This host's name.
It is send to the receiver, so it can properly recognize us if there are
more than one sender coming from the same IP address.
.It Ic timeout Aq seconds
.Pp
Connection timeout in seconds.
The default value is
.Va 5 .
.It Ic pidfile Aq path
.Pp
File in which to store the process ID of the main
.Xr auditdistd 8
process.
.Pp
The default value is
.Pa /var/run/auditdistd.pid .
.It Ic source Aq addr
.Pp
Local address to bind to before connecting to the remote
.Nm auditdistd
daemon.
Format is the same as for the
.Ic listen
statement.
.It Ic directory Aq path
.Pp
Directory where to look for audit trail files in case of sender mode or
directory where to store received audit trail files.
The provided path has to be an absolute path.
The only exception is when directory is provided in the
.Ic receiver
section, then path provided in the
.Ic host
subsections can be relative to the directory in the
.Ic receiver
section.
The default value is
.Pa /var/audit/dist
for the entire
.Ic sender
section,
.Pa /var/audit/remote
for the non-host
.Ic receiver
section and
.Pa /var/audit/remote/<name>
for the
.Ic host
subsections in the
.Ic receiver
section where
.Aq name
is host's name.
.\".It Ic checksum Aq algorithm
.\".Pp
.\"Checksum algorithm should be one of the following:
.\".Bl -tag -width ".Ic sha256"
.\".It Ic none
.\"No checksum will be calculated for the data being send over the network.
.\"This is the default setting.
.\".It Ic crc32
.\"CRC32 checksum will be calculated.
.\".It Ic sha256
.\"SHA256 checksum will be calculated.
.\".El
.\".It Ic compression Aq algorithm
.\".Pp
.\"Compression algorithm should be one of the following:
.\".Bl -tag -width ".Ic none"
.\".It Ic none
.\"Data send over the network will not be compressed.
.\"This is the default setting.
.\".It Ic lzf
.\"The
.\".Nm LZF
.\"algorithm by
.\".An Marc Alexander Lehmann
.\"will be used to compress the data send over the network.
.\".Nm LZF
.\"is very fast, general purpose compression algorithm.
.\".El
.It Ic remote Aq addr
.Pp
Address of the remote
.Nm auditdistd
daemon.
Format is the same as for the
.Ic listen
statement.
When operating in the
.Ic sender
mode this address will be used to connect to the
.Ic receiver .
When operating in the
.Ic receiver
mode only connections from this address will be accepted.
.It Ic listen Aq addr
.Pp
Address to listen on in form of:
.Bd -literal -offset indent
protocol://protocol-specific-address
.Ed
.Pp
Each of the following examples defines the same listen address:
.Bd -literal -offset indent
0.0.0.0
0.0.0.0:7878
tcp://0.0.0.0
tcp://0.0.0.0:7878
tcp4://0.0.0.0
tcp4://0.0.0.0:7878
.Ed
.Pp
Multiple listen addresses can be specified.
By default
.Nm auditdistd
listens on
.Pa tcp4://0.0.0.0:7878
and
.Pa tcp6://[::]:7878
if kernel supports IPv4 and IPv6 respectively.
.It Ic keyfile Aq path
.Pp
Path to a file that contains private key for TLS communication.
.It Ic certfile Aq path
.Pp
Path to a file that contains certificate for TLS communication.
.It Ic fingerprint Aq algo=hash
.Pp
Finger print of the receiver's public key.
Currently only SHA256 algorithm is supported.
Certificate public key's fingerprint ready to be pasted into auditdistd
configuration file can be obtained by running:
.Bd -literal -offset
# openssl x509 -in /etc/security/auditdistd.cert.pem -noout -fingerprint -sha256 | awk -F '[ =]' '{printf("%s=%s\\n", $1, $3)}'
.Ed
.It Ic password Aq password
.Pp
Password used to authenticate the sender in front of the receiver.
.El
.Sh FILES
.Bl -tag -width ".Pa /etc/security/auditdistd.conf" -compact
.It Pa /etc/security/auditdistd.conf
The default
.Nm auditdistd
configuration file.
.El
.Sh EXAMPLES
The example configuration files can look as follows.
.Pp
Web server:
.Bd -literal -offset indent
sender {
	host backup {
		remote 10.0.0.4
	}
}
.Ed
.Pp
Audit backup server:
.Bd -literal -offset indent
receiver {
	host webserv {
		remote 10.0.0.1
	}
	host mailserv {
		remote 10.0.0.2
	}
	host dnsserv {
		remote 10.0.0.3
	}
}
.Ed
.Sh SEE ALSO
.Xr audit 4 ,
.Xr auditdistd 8 .
.Sh AUTHORS
The
.Nm auditdistd
was developed by
.An Pawel Jakub Dawidek Aq pawel@dawidek.net
under sponsorship of the FreeBSD Foundation.