@node ntpd Invocation @section Invoking ntpd @pindex ntpd @cindex NTP daemon program @ignore # # EDIT THIS FILE WITH CAUTION (invoke-ntpd.texi) # # It has been AutoGen-ed May 25, 2024 at 12:04:00 AM by AutoGen 5.18.16 # From the definitions ntpd-opts.def # and the template file agtexi-cmd.tpl @end ignore The @code{ntpd} utility is an operating system daemon which sets and maintains the system time of day in synchronism with Internet standard time servers. It is a complete implementation of the Network Time Protocol (NTP) version 4, as defined by RFC-5905, but also retains compatibility with version 3, as defined by RFC-1305, and versions 1 and 2, as defined by RFC-1059 and RFC-1119, respectively. The @code{ntpd} utility does most computations in 64-bit floating point arithmetic and does relatively clumsy 64-bit fixed point operations only when necessary to preserve the ultimate precision, about 232 picoseconds. While the ultimate precision is not achievable with ordinary workstations and networks of today, it may be required with future gigahertz CPU clocks and gigabit LANs. Ordinarily, @code{ntpd} reads the @code{ntp.conf(5)} configuration file at startup time in order to determine the synchronization sources and operating modes. It is also possible to specify a working, although limited, configuration entirely on the command line, obviating the need for a configuration file. This may be particularly useful when the local host is to be configured as a broadcast/multicast client, with all peers being determined by listening to broadcasts at run time. If NetInfo support is built into @code{ntpd} then @code{ntpd} will attempt to read its configuration from the NetInfo if the default @code{ntp.conf(5)} file cannot be read and no file is specified by the @code{-c} option. Various internal @code{ntpd} variables can be displayed and configuration options altered while the @code{ntpd} is running using the @code{ntpq(1ntpqmdoc)} and @code{ntpdc(1ntpdcmdoc)} utility programs. When @code{ntpd} starts it looks at the value of @code{umask(2)}, and if zero @code{ntpd} will set the @code{umask(2)} to 022. This section was generated by @strong{AutoGen}, using the @code{agtexi-cmd} template and the option descriptions for the @code{ntpd} program. This software is released under the NTP license, . @menu * ntpd usage:: ntpd help/usage (@option{--help}) * ntpd ipv4:: ipv4 option (-4) * ntpd ipv6:: ipv6 option (-6) * ntpd authreq:: authreq option (-a) * ntpd authnoreq:: authnoreq option (-A) * ntpd configfile:: configfile option (-c) * ntpd driftfile:: driftfile option (-f) * ntpd panicgate:: panicgate option (-g) * ntpd force-step-once:: force-step-once option (-G) * ntpd jaildir:: jaildir option (-i) * ntpd interface:: interface option (-I) * ntpd keyfile:: keyfile option (-k) * ntpd logfile:: logfile option (-l) * ntpd novirtualips:: novirtualips option (-L) * ntpd modifymmtimer:: modifymmtimer option (-M) * ntpd nice:: nice option (-N) * ntpd pidfile:: pidfile option (-p) * ntpd priority:: priority option (-P) * ntpd quit:: quit option (-q) * ntpd propagationdelay:: propagationdelay option (-r) * ntpd saveconfigquit:: saveconfigquit option * ntpd statsdir:: statsdir option (-s) * ntpd trustedkey:: trustedkey option (-t) * ntpd user:: user option (-u) * ntpd updateinterval:: updateinterval option (-U) * ntpd wait-sync:: wait-sync option (-w) * ntpd slew:: slew option (-x) * ntpd usepcc:: usepcc option * ntpd pccfreq:: pccfreq option * ntpd mdns:: mdns option (-m) * ntpd config:: presetting/configuring ntpd * ntpd exit status:: exit status * ntpd Usage:: Usage * ntpd Files:: Files * ntpd See Also:: See Also * ntpd Bugs:: Bugs * ntpd Notes:: Notes @end menu @node ntpd usage @subsection ntpd help/usage (@option{--help}) @cindex ntpd help This is the automatically generated usage text for ntpd. The text printed is the same whether selected with the @code{help} option (@option{--help}) or the @code{more-help} option (@option{--more-help}). @code{more-help} will print the usage text by passing it through a pager program. @code{more-help} is disabled on platforms without a working @code{fork(2)} function. The @code{PAGER} environment variable is used to select the program, defaulting to @file{more}. Both will exit with a status code of 0. @exampleindent 0 @example ntpd - NTP daemon program - Ver. 4.2.8p18 Usage: ntpd [ - [] | --[@{=| @}] ]... \ [ ... ] Flg Arg Option-Name Description -4 no ipv4 Force IPv4 DNS name resolution - prohibits the option 'ipv6' -6 no ipv6 Force IPv6 DNS name resolution - prohibits the option 'ipv4' -a no authreq Require crypto authentication - prohibits the option 'authnoreq' -A no authnoreq Do not require crypto authentication - prohibits the option 'authreq' -b no bcastsync Allow us to sync to broadcast servers -c Str configfile configuration file name -d no debug-level Increase debug verbosity level - may appear multiple times -D Num set-debug-level Set the debug verbosity level - may appear multiple times -f Str driftfile frequency drift file name -g no panicgate Allow the first adjustment to be Big - may appear multiple times -G no force-step-once Step any initial offset correction. -i --- jaildir built without --enable-clockctl or --enable-linuxcaps or --enable-solarisprivs -I Str interface Listen on an interface name or address - may appear multiple times -k Str keyfile path to symmetric keys -l Str logfile path to the log file -L no novirtualips Do not listen to virtual interfaces -n no nofork Do not fork - prohibits the option 'wait-sync' -N no nice Run at high priority -p Str pidfile path to the PID file -P Num priority Process priority -q no quit Set the time and quit - prohibits these options: saveconfigquit wait-sync -r Str propagationdelay Broadcast/propagation delay Str saveconfigquit Save parsed configuration and quit - prohibits these options: quit wait-sync -s Str statsdir Statistics file location -t Str trustedkey Trusted key number - may appear multiple times -u --- user built without --enable-clockctl or --enable-linuxcaps or --enable-solarisprivs -U Num updateinterval interval in seconds between scans for new or dropped interfaces Str var make ARG an ntp variable (RW) - may appear multiple times Str dvar make ARG an ntp variable (RW|DEF) - may appear multiple times -w Num wait-sync Seconds to wait for first clock sync - prohibits these options: nofork quit saveconfigquit -x no slew Slew up to 600 seconds opt version output version information and exit -? no help display extended usage information and exit -! no more-help extended usage information passed thru pager Options are specified by doubled hyphens and their name or by a single hyphen and the flag character. The following option preset mechanisms are supported: - examining environment variables named NTPD_* Please send bug reports to: @end example @exampleindent 4 @node ntpd ipv4 @subsection ipv4 option (-4) @cindex ntpd-ipv4 This is the ``force ipv4 dns name resolution'' option. @noindent This option has some usage constraints. It: @itemize @bullet @item must not appear in combination with any of the following options: ipv6. @end itemize Force DNS resolution of following host names on the command line to the IPv4 namespace. @node ntpd ipv6 @subsection ipv6 option (-6) @cindex ntpd-ipv6 This is the ``force ipv6 dns name resolution'' option. @noindent This option has some usage constraints. It: @itemize @bullet @item must not appear in combination with any of the following options: ipv4. @end itemize Force DNS resolution of following host names on the command line to the IPv6 namespace. @node ntpd authreq @subsection authreq option (-a) @cindex ntpd-authreq This is the ``require crypto authentication'' option. @noindent This option has some usage constraints. It: @itemize @bullet @item must not appear in combination with any of the following options: authnoreq. @end itemize Require cryptographic authentication for broadcast client, multicast client and symmetric passive associations. This is the default. @node ntpd authnoreq @subsection authnoreq option (-A) @cindex ntpd-authnoreq This is the ``do not require crypto authentication'' option. @noindent This option has some usage constraints. It: @itemize @bullet @item must not appear in combination with any of the following options: authreq. @end itemize Do not require cryptographic authentication for broadcast client, multicast client and symmetric passive associations. This is almost never a good idea. @node ntpd configfile @subsection configfile option (-c) @cindex ntpd-configfile This is the ``configuration file name'' option. This option takes a string argument. The name and path of the configuration file, @file{/etc/ntp.conf} by default. @node ntpd driftfile @subsection driftfile option (-f) @cindex ntpd-driftfile This is the ``frequency drift file name'' option. This option takes a string argument. The name and path of the frequency file, @file{/etc/ntp.drift} by default. This is the same operation as the @code{driftfile} @kbd{driftfile} configuration specification in the @file{/etc/ntp.conf} file. @node ntpd panicgate @subsection panicgate option (-g) @cindex ntpd-panicgate This is the ``allow the first adjustment to be big'' option. @noindent This option has some usage constraints. It: @itemize @bullet @item may appear an unlimited number of times. @end itemize Normally, @code{ntpd} exits with a message to the system log if the offset exceeds the panic threshold, which is 1000 s by default. This option allows the time to be set to any value without restriction; however, this can happen only once. If the threshold is exceeded after that, @code{ntpd} will exit with a message to the system log. This option can be used with the @code{-q} and @code{-x} options. See the @code{tinker} configuration file directive for other options. @node ntpd force-step-once @subsection force-step-once option (-G) @cindex ntpd-force-step-once This is the ``step any initial offset correction.'' option. Normally, @code{ntpd} steps the time if the time offset exceeds the step threshold, which is 128 ms by default, and otherwise slews the time. This option forces the initial offset correction to be stepped, so the highest time accuracy can be achieved quickly. However, this may also cause the time to be stepped back so this option must not be used if applications requiring monotonic time are running. See the @code{tinker} configuration file directive for other options. @node ntpd jaildir @subsection jaildir option (-i) @cindex ntpd-jaildir This is the ``jail directory'' option. This option takes a string argument. @noindent This option has some usage constraints. It: @itemize @bullet @item must be compiled in by defining @code{HAVE_DROPROOT} during the compilation. @end itemize Chroot the server to the directory @kbd{jaildir} . This option also implies that the server attempts to drop root privileges at startup. You may need to also specify a @code{-u} option. This option is only available if the OS supports adjusting the clock without full root privileges. This option is supported under NetBSD (configure with @code{--enable-clockctl}) or Linux (configure with @code{--enable-linuxcaps}) or Solaris (configure with @code{--enable-solarisprivs}). @node ntpd interface @subsection interface option (-I) @cindex ntpd-interface This is the ``listen on an interface name or address'' option. This option takes a string argument @file{iface}. @noindent This option has some usage constraints. It: @itemize @bullet @item may appear an unlimited number of times. @end itemize Open the network address given, or all the addresses associated with the given interface name. This option may appear multiple times. This option also implies not opening other addresses, except wildcard and localhost. This option is deprecated. Please consider using the configuration file @code{interface} command, which is more versatile. @node ntpd keyfile @subsection keyfile option (-k) @cindex ntpd-keyfile This is the ``path to symmetric keys'' option. This option takes a string argument. Specify the name and path of the symmetric key file. @file{/etc/ntp.keys} is the default. This is the same operation as the @code{keys} @kbd{keyfile} configuration file directive. @node ntpd logfile @subsection logfile option (-l) @cindex ntpd-logfile This is the ``path to the log file'' option. This option takes a string argument. Specify the name and path of the log file. The default is the system log file. This is the same operation as the @code{logfile} @kbd{logfile} configuration file directive. @node ntpd novirtualips @subsection novirtualips option (-L) @cindex ntpd-novirtualips This is the ``do not listen to virtual interfaces'' option. Do not listen to virtual interfaces, defined as those with names containing a colon. This option is deprecated. Please consider using the configuration file @code{interface} command, which is more versatile. @node ntpd modifymmtimer @subsection modifymmtimer option (-M) @cindex ntpd-modifymmtimer This is the ``modify multimedia timer (windows only)'' option. @noindent This option has some usage constraints. It: @itemize @bullet @item must be compiled in by defining @code{SYS_WINNT} during the compilation. @end itemize Set the Windows Multimedia Timer to highest resolution. This ensures the resolution does not change while ntpd is running, avoiding timekeeping glitches associated with changes. @node ntpd nice @subsection nice option (-N) @cindex ntpd-nice This is the ``run at high priority'' option. To the extent permitted by the operating system, run @code{ntpd} at the highest priority. @node ntpd pidfile @subsection pidfile option (-p) @cindex ntpd-pidfile This is the ``path to the pid file'' option. This option takes a string argument. Specify the name and path of the file used to record @code{ntpd}'s process ID. This is the same operation as the @code{pidfile} @kbd{pidfile} configuration file directive. @node ntpd priority @subsection priority option (-P) @cindex ntpd-priority This is the ``process priority'' option. This option takes a number argument. To the extent permitted by the operating system, run @code{ntpd} at the specified @code{sched_setscheduler(SCHED_FIFO)} priority. @node ntpd quit @subsection quit option (-q) @cindex ntpd-quit This is the ``set the time and quit'' option. @noindent This option has some usage constraints. It: @itemize @bullet @item must not appear in combination with any of the following options: saveconfigquit, wait-sync. @end itemize @code{ntpd} will not daemonize and will exit after the clock is first synchronized. This behavior mimics that of the @code{ntpdate} program, which will soon be replaced with a shell script. The @code{-g} and @code{-x} options can be used with this option. Note: The kernel time discipline is disabled with this option. @node ntpd propagationdelay @subsection propagationdelay option (-r) @cindex ntpd-propagationdelay This is the ``broadcast/propagation delay'' option. This option takes a string argument. Specify the default propagation delay from the broadcast/multicast server to this client. This is necessary only if the delay cannot be computed automatically by the protocol. @node ntpd saveconfigquit @subsection saveconfigquit option @cindex ntpd-saveconfigquit This is the ``save parsed configuration and quit'' option. This option takes a string argument. @noindent This option has some usage constraints. It: @itemize @bullet @item must be compiled in by defining @code{SAVECONFIG} during the compilation. @item must not appear in combination with any of the following options: quit, wait-sync. @end itemize Cause @code{ntpd} to parse its startup configuration file and save an equivalent to the given filename and exit. This option was designed for automated testing. @node ntpd statsdir @subsection statsdir option (-s) @cindex ntpd-statsdir This is the ``statistics file location'' option. This option takes a string argument. Specify the directory path for files created by the statistics facility. This is the same operation as the @code{statsdir} @kbd{statsdir} configuration file directive. @node ntpd trustedkey @subsection trustedkey option (-t) @cindex ntpd-trustedkey This is the ``trusted key number'' option. This option takes a string argument @file{tkey}. @noindent This option has some usage constraints. It: @itemize @bullet @item may appear an unlimited number of times. @end itemize Add the specified key number to the trusted key list. @node ntpd user @subsection user option (-u) @cindex ntpd-user This is the ``run as userid (or userid:groupid)'' option. This option takes a string argument. @noindent This option has some usage constraints. It: @itemize @bullet @item must be compiled in by defining @code{HAVE_DROPROOT} during the compilation. @end itemize Specify a user, and optionally a group, to switch to. This option is only available if the OS supports adjusting the clock without full root privileges. This option is supported under NetBSD (configure with @code{--enable-clockctl}) or Linux (configure with @code{--enable-linuxcaps}) or Solaris (configure with @code{--enable-solarisprivs}). @node ntpd updateinterval @subsection updateinterval option (-U) @cindex ntpd-updateinterval This is the ``interval in seconds between scans for new or dropped interfaces'' option. This option takes a number argument. Give the time in seconds between two scans for new or dropped interfaces. For systems with routing socket support the scans will be performed shortly after the interface change has been detected by the system. Use 0 to disable scanning. 60 seconds is the minimum time between scans. @node ntpd wait-sync @subsection wait-sync option (-w) @cindex ntpd-wait-sync This is the ``seconds to wait for first clock sync'' option. This option takes a number argument. @noindent This option has some usage constraints. It: @itemize @bullet @item must be compiled in by defining @code{HAVE_WORKING_FORK} during the compilation. @item must not appear in combination with any of the following options: nofork, quit, saveconfigquit. @end itemize If greater than zero, alters @code{ntpd}'s behavior when forking to daemonize. Instead of exiting with status 0 immediately after the fork, the parent waits up to the specified number of seconds for the child to first synchronize the clock. The exit status is zero (success) if the clock was synchronized, otherwise it is @code{ETIMEDOUT}. This provides the option for a script starting @code{ntpd} to easily wait for the first set of the clock before proceeding. @node ntpd slew @subsection slew option (-x) @cindex ntpd-slew This is the ``slew up to 600 seconds'' option. Normally, the time is slewed if the offset is less than the step threshold, which is 128 ms by default, and stepped if above the threshold. This option sets the threshold to 600 s, which is well within the accuracy window to set the clock manually. Note: Since the slew rate of typical Unix kernels is limited to 0.5 ms/s, each second of adjustment requires an amortization interval of 2000 s. Thus, an adjustment as much as 600 s will take almost 14 days to complete. This option can be used with the @code{-g} and @code{-q} options. See the @code{tinker} configuration file directive for other options. Note: The kernel time discipline is disabled with this option. @node ntpd usepcc @subsection usepcc option @cindex ntpd-usepcc This is the ``use cpu cycle counter (windows only)'' option. @noindent This option has some usage constraints. It: @itemize @bullet @item must be compiled in by defining @code{SYS_WINNT} during the compilation. @end itemize Attempt to substitute the CPU counter for @code{QueryPerformanceCounter}. The CPU counter and @code{QueryPerformanceCounter} are compared, and if they have the same frequency, the CPU counter (RDTSC on x86) is used directly, saving the overhead of a system call. @node ntpd pccfreq @subsection pccfreq option @cindex ntpd-pccfreq This is the ``force cpu cycle counter use (windows only)'' option. This option takes a string argument. @noindent This option has some usage constraints. It: @itemize @bullet @item must be compiled in by defining @code{SYS_WINNT} during the compilation. @end itemize Force substitution the CPU counter for @code{QueryPerformanceCounter}. The CPU counter (RDTSC on x86) is used unconditionally with the given frequency (in Hz). @node ntpd mdns @subsection mdns option (-m) @cindex ntpd-mdns This is the ``register with mdns as a ntp server'' option. @noindent This option has some usage constraints. It: @itemize @bullet @item must be compiled in by defining @code{HAVE_DNSREGISTRATION} during the compilation. @end itemize Registers as an NTP server with the local mDNS server which allows the server to be discovered via mDNS client lookup. @node ntpd config @subsection presetting/configuring ntpd Any option that is not marked as @i{not presettable} may be preset by loading values from environment variables named @code{NTPD} and @code{NTPD_}. @code{} must be one of the options listed above in upper case and segmented with underscores. The @code{NTPD} variable will be tokenized and parsed like the command line. The remaining variables are tested for existence and their values are treated like option arguments. The command line options relating to configuration and/or usage help are: @subsubheading version (-) Print the program version to standard out, optionally with licensing information, then exit 0. The optional argument specifies how much licensing detail to provide. The default is to print just the version. The licensing information may be selected with an option argument. Only the first letter of the argument is examined: @table @samp @item version Only print the version. This is the default. @item copyright Name the copyright usage licensing terms. @item verbose Print the full copyright usage licensing terms. @end table @node ntpd exit status @subsection ntpd exit status One of the following exit values will be returned: @table @samp @item 0 (EXIT_SUCCESS) Successful program execution. @item 1 (EXIT_FAILURE) The operation failed or the command syntax was not valid. @end table @node ntpd Usage @subsection ntpd Usage @node ntpd Files @subsection ntpd Files @node ntpd See Also @subsection ntpd See Also @node ntpd Bugs @subsection ntpd Bugs @node ntpd Notes @subsection ntpd Notes