//=== WebAssemblyLowerEmscriptenEHSjLj.cpp - Lower exceptions for Emscripten =// // // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. // See https://llvm.org/LICENSE.txt for license information. // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception // //===----------------------------------------------------------------------===// /// /// \file /// This file lowers exception-related instructions and setjmp/longjmp function /// calls to use Emscripten's library functions. The pass uses JavaScript's try /// and catch mechanism in case of Emscripten EH/SjLj and Wasm EH intrinsics in /// case of Emscripten SjLJ. /// /// * Emscripten exception handling /// This pass lowers invokes and landingpads into library functions in JS glue /// code. Invokes are lowered into function wrappers called invoke wrappers that /// exist in JS side, which wraps the original function call with JS try-catch. /// If an exception occurred, cxa_throw() function in JS side sets some /// variables (see below) so we can check whether an exception occurred from /// wasm code and handle it appropriately. /// /// * Emscripten setjmp-longjmp handling /// This pass lowers setjmp to a reasonably-performant approach for emscripten. /// The idea is that each block with a setjmp is broken up into two parts: the /// part containing setjmp and the part right after the setjmp. The latter part /// is either reached from the setjmp, or later from a longjmp. To handle the /// longjmp, all calls that might longjmp are also called using invoke wrappers /// and thus JS / try-catch. JS longjmp() function also sets some variables so /// we can check / whether a longjmp occurred from wasm code. Each block with a /// function call that might longjmp is also split up after the longjmp call. /// After the longjmp call, we check whether a longjmp occurred, and if it did, /// which setjmp it corresponds to, and jump to the right post-setjmp block. /// We assume setjmp-longjmp handling always run after EH handling, which means /// we don't expect any exception-related instructions when SjLj runs. /// FIXME Currently this scheme does not support indirect call of setjmp, /// because of the limitation of the scheme itself. fastcomp does not support it /// either. /// /// In detail, this pass does following things: /// /// 1) Assumes the existence of global variables: __THREW__, __threwValue /// __THREW__ and __threwValue are defined in compiler-rt in Emscripten. /// These variables are used for both exceptions and setjmp/longjmps. /// __THREW__ indicates whether an exception or a longjmp occurred or not. 0 /// means nothing occurred, 1 means an exception occurred, and other numbers /// mean a longjmp occurred. In the case of longjmp, __THREW__ variable /// indicates the corresponding setjmp buffer the longjmp corresponds to. /// __threwValue is 0 for exceptions, and the argument to longjmp in case of /// longjmp. /// /// * Emscripten exception handling /// /// 2) We assume the existence of setThrew and setTempRet0/getTempRet0 functions /// at link time. setThrew exists in Emscripten's compiler-rt: /// /// void setThrew(uintptr_t threw, int value) { /// if (__THREW__ == 0) { /// __THREW__ = threw; /// __threwValue = value; /// } /// } // /// setTempRet0 is called from __cxa_find_matching_catch() in JS glue code. /// In exception handling, getTempRet0 indicates the type of an exception /// caught, and in setjmp/longjmp, it means the second argument to longjmp /// function. /// /// 3) Lower /// invoke @func(arg1, arg2) to label %invoke.cont unwind label %lpad /// into /// __THREW__ = 0; /// call @__invoke_SIG(func, arg1, arg2) /// %__THREW__.val = __THREW__; /// __THREW__ = 0; /// if (%__THREW__.val == 1) /// goto %lpad /// else /// goto %invoke.cont /// SIG is a mangled string generated based on the LLVM IR-level function /// signature. After LLVM IR types are lowered to the target wasm types, /// the names for these wrappers will change based on wasm types as well, /// as in invoke_vi (function takes an int and returns void). The bodies of /// these wrappers will be generated in JS glue code, and inside those /// wrappers we use JS try-catch to generate actual exception effects. It /// also calls the original callee function. An example wrapper in JS code /// would look like this: /// function invoke_vi(index,a1) { /// try { /// Module["dynCall_vi"](index,a1); // This calls original callee /// } catch(e) { /// if (typeof e !== 'number' && e !== 'longjmp') throw e; /// _setThrew(1, 0); // setThrew is called here /// } /// } /// If an exception is thrown, __THREW__ will be set to true in a wrapper, /// so we can jump to the right BB based on this value. /// /// 4) Lower /// %val = landingpad catch c1 catch c2 catch c3 ... /// ... use %val ... /// into /// %fmc = call @__cxa_find_matching_catch_N(c1, c2, c3, ...) /// %val = {%fmc, getTempRet0()} /// ... use %val ... /// Here N is a number calculated based on the number of clauses. /// setTempRet0 is called from __cxa_find_matching_catch() in JS glue code. /// /// 5) Lower /// resume {%a, %b} /// into /// call @__resumeException(%a) /// where __resumeException() is a function in JS glue code. /// /// 6) Lower /// call @llvm.eh.typeid.for(type) (intrinsic) /// into /// call @llvm_eh_typeid_for(type) /// llvm_eh_typeid_for function will be generated in JS glue code. /// /// * Emscripten setjmp / longjmp handling /// /// If there are calls to longjmp() /// /// 1) Lower /// longjmp(env, val) /// into /// emscripten_longjmp(env, val) /// /// If there are calls to setjmp() /// /// 2) In the function entry that calls setjmp, initialize setjmpTable and /// sejmpTableSize as follows: /// setjmpTableSize = 4; /// setjmpTable = (int *) malloc(40); /// setjmpTable[0] = 0; /// setjmpTable and setjmpTableSize are used to call saveSetjmp() function in /// Emscripten compiler-rt. /// /// 3) Lower /// setjmp(env) /// into /// setjmpTable = saveSetjmp(env, label, setjmpTable, setjmpTableSize); /// setjmpTableSize = getTempRet0(); /// For each dynamic setjmp call, setjmpTable stores its ID (a number which /// is incrementally assigned from 0) and its label (a unique number that /// represents each callsite of setjmp). When we need more entries in /// setjmpTable, it is reallocated in saveSetjmp() in Emscripten's /// compiler-rt and it will return the new table address, and assign the new /// table size in setTempRet0(). saveSetjmp also stores the setjmp's ID into /// the buffer 'env'. A BB with setjmp is split into two after setjmp call in /// order to make the post-setjmp BB the possible destination of longjmp BB. /// /// 4) Lower every call that might longjmp into /// __THREW__ = 0; /// call @__invoke_SIG(func, arg1, arg2) /// %__THREW__.val = __THREW__; /// __THREW__ = 0; /// %__threwValue.val = __threwValue; /// if (%__THREW__.val != 0 & %__threwValue.val != 0) { /// %label = testSetjmp(mem[%__THREW__.val], setjmpTable, /// setjmpTableSize); /// if (%label == 0) /// emscripten_longjmp(%__THREW__.val, %__threwValue.val); /// setTempRet0(%__threwValue.val); /// } else { /// %label = -1; /// } /// longjmp_result = getTempRet0(); /// switch %label { /// label 1: goto post-setjmp BB 1 /// label 2: goto post-setjmp BB 2 /// ... /// default: goto splitted next BB /// } /// testSetjmp examines setjmpTable to see if there is a matching setjmp /// call. After calling an invoke wrapper, if a longjmp occurred, __THREW__ /// will be the address of matching jmp_buf buffer and __threwValue be the /// second argument to longjmp. mem[%__THREW__.val] is a setjmp ID that is /// stored in saveSetjmp. testSetjmp returns a setjmp label, a unique ID to /// each setjmp callsite. Label 0 means this longjmp buffer does not /// correspond to one of the setjmp callsites in this function, so in this /// case we just chain the longjmp to the caller. Label -1 means no longjmp /// occurred. Otherwise we jump to the right post-setjmp BB based on the /// label. /// /// * Wasm setjmp / longjmp handling /// This mode still uses some Emscripten library functions but not JavaScript's /// try-catch mechanism. It instead uses Wasm exception handling intrinsics, /// which will be lowered to exception handling instructions. /// /// If there are calls to longjmp() /// /// 1) Lower /// longjmp(env, val) /// into /// __wasm_longjmp(env, val) /// /// If there are calls to setjmp() /// /// 2) and 3): The same as 2) and 3) in Emscripten SjLj. /// (setjmpTable/setjmpTableSize initialization + setjmp callsite /// transformation) /// /// 4) Create a catchpad with a wasm.catch() intrinsic, which returns the value /// thrown by __wasm_longjmp function. In Emscripten library, we have this /// struct: /// /// struct __WasmLongjmpArgs { /// void *env; /// int val; /// }; /// struct __WasmLongjmpArgs __wasm_longjmp_args; /// /// The thrown value here is a pointer to __wasm_longjmp_args struct object. We /// use this struct to transfer two values by throwing a single value. Wasm /// throw and catch instructions are capable of throwing and catching multiple /// values, but it also requires multivalue support that is currently not very /// reliable. /// TODO Switch to throwing and catching two values without using the struct /// /// All longjmpable function calls will be converted to an invoke that will /// unwind to this catchpad in case a longjmp occurs. Within the catchpad, we /// test the thrown values using testSetjmp function as we do for Emscripten /// SjLj. The main difference is, in Emscripten SjLj, we need to transform every /// longjmpable callsite into a sequence of code including testSetjmp() call; in /// Wasm SjLj we do the testing in only one place, in this catchpad. /// /// After testing calling testSetjmp(), if the longjmp does not correspond to /// one of the setjmps within the current function, it rethrows the longjmp /// by calling __wasm_longjmp(). If it corresponds to one of setjmps in the /// function, we jump to the beginning of the function, which contains a switch /// to each post-setjmp BB. Again, in Emscripten SjLj, this switch is added for /// every longjmpable callsite; in Wasm SjLj we do this only once at the top of /// the function. (after setjmpTable/setjmpTableSize initialization) /// /// The below is the pseudocode for what we have described /// /// entry: /// Initialize setjmpTable and setjmpTableSize /// /// setjmp.dispatch: /// switch %label { /// label 1: goto post-setjmp BB 1 /// label 2: goto post-setjmp BB 2 /// ... /// default: goto splitted next BB /// } /// ... /// /// bb: /// invoke void @foo() ;; foo is a longjmpable function /// to label %next unwind label %catch.dispatch.longjmp /// ... /// /// catch.dispatch.longjmp: /// %0 = catchswitch within none [label %catch.longjmp] unwind to caller /// /// catch.longjmp: /// %longjmp.args = wasm.catch() ;; struct __WasmLongjmpArgs /// %env = load 'env' field from __WasmLongjmpArgs /// %val = load 'val' field from __WasmLongjmpArgs /// %label = testSetjmp(mem[%env], setjmpTable, setjmpTableSize); /// if (%label == 0) /// __wasm_longjmp(%env, %val) /// catchret to %setjmp.dispatch /// ///===----------------------------------------------------------------------===// #include "MCTargetDesc/WebAssemblyMCTargetDesc.h" #include "WebAssembly.h" #include "WebAssemblyTargetMachine.h" #include "llvm/ADT/StringExtras.h" #include "llvm/CodeGen/TargetPassConfig.h" #include "llvm/CodeGen/WasmEHFuncInfo.h" #include "llvm/IR/DebugInfoMetadata.h" #include "llvm/IR/Dominators.h" #include "llvm/IR/IRBuilder.h" #include "llvm/IR/IntrinsicsWebAssembly.h" #include "llvm/Support/CommandLine.h" #include "llvm/Transforms/Utils/BasicBlockUtils.h" #include "llvm/Transforms/Utils/Local.h" #include "llvm/Transforms/Utils/SSAUpdater.h" #include "llvm/Transforms/Utils/SSAUpdaterBulk.h" using namespace llvm; #define DEBUG_TYPE "wasm-lower-em-ehsjlj" static cl::list EHAllowlist("emscripten-cxx-exceptions-allowed", cl::desc("The list of function names in which Emscripten-style " "exception handling is enabled (see emscripten " "EMSCRIPTEN_CATCHING_ALLOWED options)"), cl::CommaSeparated); namespace { class WebAssemblyLowerEmscriptenEHSjLj final : public ModulePass { bool EnableEmEH; // Enable Emscripten exception handling bool EnableEmSjLj; // Enable Emscripten setjmp/longjmp handling bool EnableWasmSjLj; // Enable Wasm setjmp/longjmp handling bool DoSjLj; // Whether we actually perform setjmp/longjmp handling GlobalVariable *ThrewGV = nullptr; // __THREW__ (Emscripten) GlobalVariable *ThrewValueGV = nullptr; // __threwValue (Emscripten) Function *GetTempRet0F = nullptr; // getTempRet0() (Emscripten) Function *SetTempRet0F = nullptr; // setTempRet0() (Emscripten) Function *ResumeF = nullptr; // __resumeException() (Emscripten) Function *EHTypeIDF = nullptr; // llvm.eh.typeid.for() (intrinsic) Function *EmLongjmpF = nullptr; // emscripten_longjmp() (Emscripten) Function *SaveSetjmpF = nullptr; // saveSetjmp() (Emscripten) Function *TestSetjmpF = nullptr; // testSetjmp() (Emscripten) Function *WasmLongjmpF = nullptr; // __wasm_longjmp() (Emscripten) Function *CatchF = nullptr; // wasm.catch() (intrinsic) // type of 'struct __WasmLongjmpArgs' defined in emscripten Type *LongjmpArgsTy = nullptr; // __cxa_find_matching_catch_N functions. // Indexed by the number of clauses in an original landingpad instruction. DenseMap FindMatchingCatches; // Map of StringMap InvokeWrappers; // Set of allowed function names for exception handling std::set EHAllowlistSet; // Functions that contains calls to setjmp SmallPtrSet SetjmpUsers; StringRef getPassName() const override { return "WebAssembly Lower Emscripten Exceptions"; } using InstVector = SmallVectorImpl; bool runEHOnFunction(Function &F); bool runSjLjOnFunction(Function &F); void handleLongjmpableCallsForEmscriptenSjLj( Function &F, InstVector &SetjmpTableInsts, InstVector &SetjmpTableSizeInsts, SmallVectorImpl &SetjmpRetPHIs); void handleLongjmpableCallsForWasmSjLj(Function &F, InstVector &SetjmpTableInsts, InstVector &SetjmpTableSizeInsts, SmallVectorImpl &SetjmpRetPHIs); Function *getFindMatchingCatch(Module &M, unsigned NumClauses); Value *wrapInvoke(CallBase *CI); void wrapTestSetjmp(BasicBlock *BB, DebugLoc DL, Value *Threw, Value *SetjmpTable, Value *SetjmpTableSize, Value *&Label, Value *&LongjmpResult, BasicBlock *&CallEmLongjmpBB, PHINode *&CallEmLongjmpBBThrewPHI, PHINode *&CallEmLongjmpBBThrewValuePHI, BasicBlock *&EndBB); Function *getInvokeWrapper(CallBase *CI); bool areAllExceptionsAllowed() const { return EHAllowlistSet.empty(); } bool supportsException(const Function *F) const { return EnableEmEH && (areAllExceptionsAllowed() || EHAllowlistSet.count(std::string(F->getName()))); } void replaceLongjmpWith(Function *LongjmpF, Function *NewF); void rebuildSSA(Function &F); public: static char ID; WebAssemblyLowerEmscriptenEHSjLj() : ModulePass(ID), EnableEmEH(WebAssembly::WasmEnableEmEH), EnableEmSjLj(WebAssembly::WasmEnableEmSjLj), EnableWasmSjLj(WebAssembly::WasmEnableSjLj) { assert(!(EnableEmSjLj && EnableWasmSjLj) && "Two SjLj modes cannot be turned on at the same time"); assert(!(EnableEmEH && EnableWasmSjLj) && "Wasm SjLj should be only used with Wasm EH"); EHAllowlistSet.insert(EHAllowlist.begin(), EHAllowlist.end()); } bool runOnModule(Module &M) override; void getAnalysisUsage(AnalysisUsage &AU) const override { AU.addRequired(); } }; } // End anonymous namespace char WebAssemblyLowerEmscriptenEHSjLj::ID = 0; INITIALIZE_PASS(WebAssemblyLowerEmscriptenEHSjLj, DEBUG_TYPE, "WebAssembly Lower Emscripten Exceptions / Setjmp / Longjmp", false, false) ModulePass *llvm::createWebAssemblyLowerEmscriptenEHSjLj() { return new WebAssemblyLowerEmscriptenEHSjLj(); } static bool canThrow(const Value *V) { if (const auto *F = dyn_cast(V)) { // Intrinsics cannot throw if (F->isIntrinsic()) return false; StringRef Name = F->getName(); // leave setjmp and longjmp (mostly) alone, we process them properly later if (Name == "setjmp" || Name == "longjmp" || Name == "emscripten_longjmp") return false; return !F->doesNotThrow(); } // not a function, so an indirect call - can throw, we can't tell return true; } // Get a thread-local global variable with the given name. If it doesn't exist // declare it, which will generate an import and assume that it will exist at // link time. static GlobalVariable *getGlobalVariable(Module &M, Type *Ty, WebAssemblyTargetMachine &TM, const char *Name) { auto *GV = dyn_cast(M.getOrInsertGlobal(Name, Ty)); if (!GV) report_fatal_error(Twine("unable to create global: ") + Name); // Variables created by this function are thread local. If the target does not // support TLS, we depend on CoalesceFeaturesAndStripAtomics to downgrade it // to non-thread-local ones, in which case we don't allow this object to be // linked with other objects using shared memory. GV->setThreadLocalMode(GlobalValue::GeneralDynamicTLSModel); return GV; } // Simple function name mangler. // This function simply takes LLVM's string representation of parameter types // and concatenate them with '_'. There are non-alphanumeric characters but llc // is ok with it, and we need to postprocess these names after the lowering // phase anyway. static std::string getSignature(FunctionType *FTy) { std::string Sig; raw_string_ostream OS(Sig); OS << *FTy->getReturnType(); for (Type *ParamTy : FTy->params()) OS << "_" << *ParamTy; if (FTy->isVarArg()) OS << "_..."; Sig = OS.str(); erase_if(Sig, isSpace); // When s2wasm parses .s file, a comma means the end of an argument. So a // mangled function name can contain any character but a comma. std::replace(Sig.begin(), Sig.end(), ',', '.'); return Sig; } static Function *getEmscriptenFunction(FunctionType *Ty, const Twine &Name, Module *M) { Function* F = Function::Create(Ty, GlobalValue::ExternalLinkage, Name, M); // Tell the linker that this function is expected to be imported from the // 'env' module. if (!F->hasFnAttribute("wasm-import-module")) { llvm::AttrBuilder B(M->getContext()); B.addAttribute("wasm-import-module", "env"); F->addFnAttrs(B); } if (!F->hasFnAttribute("wasm-import-name")) { llvm::AttrBuilder B(M->getContext()); B.addAttribute("wasm-import-name", F->getName()); F->addFnAttrs(B); } return F; } // Returns an integer type for the target architecture's address space. // i32 for wasm32 and i64 for wasm64. static Type *getAddrIntType(Module *M) { IRBuilder<> IRB(M->getContext()); return IRB.getIntNTy(M->getDataLayout().getPointerSizeInBits()); } // Returns an integer pointer type for the target architecture's address space. // i32* for wasm32 and i64* for wasm64. static Type *getAddrPtrType(Module *M) { return Type::getIntNPtrTy(M->getContext(), M->getDataLayout().getPointerSizeInBits()); } // Returns an integer whose type is the integer type for the target's address // space. Returns (i32 C) for wasm32 and (i64 C) for wasm64, when C is the // integer. static Value *getAddrSizeInt(Module *M, uint64_t C) { IRBuilder<> IRB(M->getContext()); return IRB.getIntN(M->getDataLayout().getPointerSizeInBits(), C); } // Returns __cxa_find_matching_catch_N function, where N = NumClauses + 2. // This is because a landingpad instruction contains two more arguments, a // personality function and a cleanup bit, and __cxa_find_matching_catch_N // functions are named after the number of arguments in the original landingpad // instruction. Function * WebAssemblyLowerEmscriptenEHSjLj::getFindMatchingCatch(Module &M, unsigned NumClauses) { if (FindMatchingCatches.count(NumClauses)) return FindMatchingCatches[NumClauses]; PointerType *Int8PtrTy = Type::getInt8PtrTy(M.getContext()); SmallVector Args(NumClauses, Int8PtrTy); FunctionType *FTy = FunctionType::get(Int8PtrTy, Args, false); Function *F = getEmscriptenFunction( FTy, "__cxa_find_matching_catch_" + Twine(NumClauses + 2), &M); FindMatchingCatches[NumClauses] = F; return F; } // Generate invoke wrapper seqence with preamble and postamble // Preamble: // __THREW__ = 0; // Postamble: // %__THREW__.val = __THREW__; __THREW__ = 0; // Returns %__THREW__.val, which indicates whether an exception is thrown (or // whether longjmp occurred), for future use. Value *WebAssemblyLowerEmscriptenEHSjLj::wrapInvoke(CallBase *CI) { Module *M = CI->getModule(); LLVMContext &C = M->getContext(); IRBuilder<> IRB(C); IRB.SetInsertPoint(CI); // Pre-invoke // __THREW__ = 0; IRB.CreateStore(getAddrSizeInt(M, 0), ThrewGV); // Invoke function wrapper in JavaScript SmallVector Args; // Put the pointer to the callee as first argument, so it can be called // within the invoke wrapper later Args.push_back(CI->getCalledOperand()); Args.append(CI->arg_begin(), CI->arg_end()); CallInst *NewCall = IRB.CreateCall(getInvokeWrapper(CI), Args); NewCall->takeName(CI); NewCall->setCallingConv(CallingConv::WASM_EmscriptenInvoke); NewCall->setDebugLoc(CI->getDebugLoc()); // Because we added the pointer to the callee as first argument, all // argument attribute indices have to be incremented by one. SmallVector ArgAttributes; const AttributeList &InvokeAL = CI->getAttributes(); // No attributes for the callee pointer. ArgAttributes.push_back(AttributeSet()); // Copy the argument attributes from the original for (unsigned I = 0, E = CI->arg_size(); I < E; ++I) ArgAttributes.push_back(InvokeAL.getParamAttrs(I)); AttrBuilder FnAttrs(CI->getContext(), InvokeAL.getFnAttrs()); if (auto Args = FnAttrs.getAllocSizeArgs()) { // The allocsize attribute (if any) referes to parameters by index and needs // to be adjusted. auto [SizeArg, NEltArg] = *Args; SizeArg += 1; if (NEltArg) NEltArg = *NEltArg + 1; FnAttrs.addAllocSizeAttr(SizeArg, NEltArg); } // In case the callee has 'noreturn' attribute, We need to remove it, because // we expect invoke wrappers to return. FnAttrs.removeAttribute(Attribute::NoReturn); // Reconstruct the AttributesList based on the vector we constructed. AttributeList NewCallAL = AttributeList::get( C, AttributeSet::get(C, FnAttrs), InvokeAL.getRetAttrs(), ArgAttributes); NewCall->setAttributes(NewCallAL); CI->replaceAllUsesWith(NewCall); // Post-invoke // %__THREW__.val = __THREW__; __THREW__ = 0; Value *Threw = IRB.CreateLoad(getAddrIntType(M), ThrewGV, ThrewGV->getName() + ".val"); IRB.CreateStore(getAddrSizeInt(M, 0), ThrewGV); return Threw; } // Get matching invoke wrapper based on callee signature Function *WebAssemblyLowerEmscriptenEHSjLj::getInvokeWrapper(CallBase *CI) { Module *M = CI->getModule(); SmallVector ArgTys; FunctionType *CalleeFTy = CI->getFunctionType(); std::string Sig = getSignature(CalleeFTy); if (InvokeWrappers.contains(Sig)) return InvokeWrappers[Sig]; // Put the pointer to the callee as first argument ArgTys.push_back(PointerType::getUnqual(CalleeFTy)); // Add argument types ArgTys.append(CalleeFTy->param_begin(), CalleeFTy->param_end()); FunctionType *FTy = FunctionType::get(CalleeFTy->getReturnType(), ArgTys, CalleeFTy->isVarArg()); Function *F = getEmscriptenFunction(FTy, "__invoke_" + Sig, M); InvokeWrappers[Sig] = F; return F; } static bool canLongjmp(const Value *Callee) { if (auto *CalleeF = dyn_cast(Callee)) if (CalleeF->isIntrinsic()) return false; // Attempting to transform inline assembly will result in something like: // call void @__invoke_void(void ()* asm ...) // which is invalid because inline assembly blocks do not have addresses // and can't be passed by pointer. The result is a crash with illegal IR. if (isa(Callee)) return false; StringRef CalleeName = Callee->getName(); // TODO Include more functions or consider checking with mangled prefixes // The reason we include malloc/free here is to exclude the malloc/free // calls generated in setjmp prep / cleanup routines. if (CalleeName == "setjmp" || CalleeName == "malloc" || CalleeName == "free") return false; // There are functions in Emscripten's JS glue code or compiler-rt if (CalleeName == "__resumeException" || CalleeName == "llvm_eh_typeid_for" || CalleeName == "saveSetjmp" || CalleeName == "testSetjmp" || CalleeName == "getTempRet0" || CalleeName == "setTempRet0") return false; // __cxa_find_matching_catch_N functions cannot longjmp if (Callee->getName().startswith("__cxa_find_matching_catch_")) return false; // Exception-catching related functions // // We intentionally treat __cxa_end_catch longjmpable in Wasm SjLj even though // it surely cannot longjmp, in order to maintain the unwind relationship from // all existing catchpads (and calls within them) to catch.dispatch.longjmp. // // In Wasm EH + Wasm SjLj, we // 1. Make all catchswitch and cleanuppad that unwind to caller unwind to // catch.dispatch.longjmp instead // 2. Convert all longjmpable calls to invokes that unwind to // catch.dispatch.longjmp // But catchswitch BBs are removed in isel, so if an EH catchswitch (generated // from an exception)'s catchpad does not contain any calls that are converted // into invokes unwinding to catch.dispatch.longjmp, this unwind relationship // (EH catchswitch BB -> catch.dispatch.longjmp BB) is lost and // catch.dispatch.longjmp BB can be placed before the EH catchswitch BB in // CFGSort. // int ret = setjmp(buf); // try { // foo(); // longjmps // } catch (...) { // } // Then in this code, if 'foo' longjmps, it first unwinds to 'catch (...)' // catchswitch, and is not caught by that catchswitch because it is a longjmp, // then it should next unwind to catch.dispatch.longjmp BB. But if this 'catch // (...)' catchswitch -> catch.dispatch.longjmp unwind relationship is lost, // it will not unwind to catch.dispatch.longjmp, producing an incorrect // result. // // Every catchpad generated by Wasm C++ contains __cxa_end_catch, so we // intentionally treat it as longjmpable to work around this problem. This is // a hacky fix but an easy one. // // The comment block in findWasmUnwindDestinations() in // SelectionDAGBuilder.cpp is addressing a similar problem. if (CalleeName == "__cxa_end_catch") return WebAssembly::WasmEnableSjLj; if (CalleeName == "__cxa_begin_catch" || CalleeName == "__cxa_allocate_exception" || CalleeName == "__cxa_throw" || CalleeName == "__clang_call_terminate") return false; // std::terminate, which is generated when another exception occurs while // handling an exception, cannot longjmp. if (CalleeName == "_ZSt9terminatev") return false; // Otherwise we don't know return true; } static bool isEmAsmCall(const Value *Callee) { StringRef CalleeName = Callee->getName(); // This is an exhaustive list from Emscripten's . return CalleeName == "emscripten_asm_const_int" || CalleeName == "emscripten_asm_const_double" || CalleeName == "emscripten_asm_const_int_sync_on_main_thread" || CalleeName == "emscripten_asm_const_double_sync_on_main_thread" || CalleeName == "emscripten_asm_const_async_on_main_thread"; } // Generate testSetjmp function call seqence with preamble and postamble. // The code this generates is equivalent to the following JavaScript code: // %__threwValue.val = __threwValue; // if (%__THREW__.val != 0 & %__threwValue.val != 0) { // %label = testSetjmp(mem[%__THREW__.val], setjmpTable, setjmpTableSize); // if (%label == 0) // emscripten_longjmp(%__THREW__.val, %__threwValue.val); // setTempRet0(%__threwValue.val); // } else { // %label = -1; // } // %longjmp_result = getTempRet0(); // // As output parameters. returns %label, %longjmp_result, and the BB the last // instruction (%longjmp_result = ...) is in. void WebAssemblyLowerEmscriptenEHSjLj::wrapTestSetjmp( BasicBlock *BB, DebugLoc DL, Value *Threw, Value *SetjmpTable, Value *SetjmpTableSize, Value *&Label, Value *&LongjmpResult, BasicBlock *&CallEmLongjmpBB, PHINode *&CallEmLongjmpBBThrewPHI, PHINode *&CallEmLongjmpBBThrewValuePHI, BasicBlock *&EndBB) { Function *F = BB->getParent(); Module *M = F->getParent(); LLVMContext &C = M->getContext(); IRBuilder<> IRB(C); IRB.SetCurrentDebugLocation(DL); // if (%__THREW__.val != 0 & %__threwValue.val != 0) IRB.SetInsertPoint(BB); BasicBlock *ThenBB1 = BasicBlock::Create(C, "if.then1", F); BasicBlock *ElseBB1 = BasicBlock::Create(C, "if.else1", F); BasicBlock *EndBB1 = BasicBlock::Create(C, "if.end", F); Value *ThrewCmp = IRB.CreateICmpNE(Threw, getAddrSizeInt(M, 0)); Value *ThrewValue = IRB.CreateLoad(IRB.getInt32Ty(), ThrewValueGV, ThrewValueGV->getName() + ".val"); Value *ThrewValueCmp = IRB.CreateICmpNE(ThrewValue, IRB.getInt32(0)); Value *Cmp1 = IRB.CreateAnd(ThrewCmp, ThrewValueCmp, "cmp1"); IRB.CreateCondBr(Cmp1, ThenBB1, ElseBB1); // Generate call.em.longjmp BB once and share it within the function if (!CallEmLongjmpBB) { // emscripten_longjmp(%__THREW__.val, %__threwValue.val); CallEmLongjmpBB = BasicBlock::Create(C, "call.em.longjmp", F); IRB.SetInsertPoint(CallEmLongjmpBB); CallEmLongjmpBBThrewPHI = IRB.CreatePHI(getAddrIntType(M), 4, "threw.phi"); CallEmLongjmpBBThrewValuePHI = IRB.CreatePHI(IRB.getInt32Ty(), 4, "threwvalue.phi"); CallEmLongjmpBBThrewPHI->addIncoming(Threw, ThenBB1); CallEmLongjmpBBThrewValuePHI->addIncoming(ThrewValue, ThenBB1); IRB.CreateCall(EmLongjmpF, {CallEmLongjmpBBThrewPHI, CallEmLongjmpBBThrewValuePHI}); IRB.CreateUnreachable(); } else { CallEmLongjmpBBThrewPHI->addIncoming(Threw, ThenBB1); CallEmLongjmpBBThrewValuePHI->addIncoming(ThrewValue, ThenBB1); } // %label = testSetjmp(mem[%__THREW__.val], setjmpTable, setjmpTableSize); // if (%label == 0) IRB.SetInsertPoint(ThenBB1); BasicBlock *EndBB2 = BasicBlock::Create(C, "if.end2", F); Value *ThrewPtr = IRB.CreateIntToPtr(Threw, getAddrPtrType(M), Threw->getName() + ".p"); Value *LoadedThrew = IRB.CreateLoad(getAddrIntType(M), ThrewPtr, ThrewPtr->getName() + ".loaded"); Value *ThenLabel = IRB.CreateCall( TestSetjmpF, {LoadedThrew, SetjmpTable, SetjmpTableSize}, "label"); Value *Cmp2 = IRB.CreateICmpEQ(ThenLabel, IRB.getInt32(0)); IRB.CreateCondBr(Cmp2, CallEmLongjmpBB, EndBB2); // setTempRet0(%__threwValue.val); IRB.SetInsertPoint(EndBB2); IRB.CreateCall(SetTempRet0F, ThrewValue); IRB.CreateBr(EndBB1); IRB.SetInsertPoint(ElseBB1); IRB.CreateBr(EndBB1); // longjmp_result = getTempRet0(); IRB.SetInsertPoint(EndBB1); PHINode *LabelPHI = IRB.CreatePHI(IRB.getInt32Ty(), 2, "label"); LabelPHI->addIncoming(ThenLabel, EndBB2); LabelPHI->addIncoming(IRB.getInt32(-1), ElseBB1); // Output parameter assignment Label = LabelPHI; EndBB = EndBB1; LongjmpResult = IRB.CreateCall(GetTempRet0F, std::nullopt, "longjmp_result"); } void WebAssemblyLowerEmscriptenEHSjLj::rebuildSSA(Function &F) { DominatorTree &DT = getAnalysis(F).getDomTree(); DT.recalculate(F); // CFG has been changed SSAUpdaterBulk SSA; for (BasicBlock &BB : F) { for (Instruction &I : BB) { unsigned VarID = SSA.AddVariable(I.getName(), I.getType()); // If a value is defined by an invoke instruction, it is only available in // its normal destination and not in its unwind destination. if (auto *II = dyn_cast(&I)) SSA.AddAvailableValue(VarID, II->getNormalDest(), II); else SSA.AddAvailableValue(VarID, &BB, &I); for (auto &U : I.uses()) { auto *User = cast(U.getUser()); if (auto *UserPN = dyn_cast(User)) if (UserPN->getIncomingBlock(U) == &BB) continue; if (DT.dominates(&I, User)) continue; SSA.AddUse(VarID, &U); } } } SSA.RewriteAllUses(&DT); } // Replace uses of longjmp with a new longjmp function in Emscripten library. // In Emscripten SjLj, the new function is // void emscripten_longjmp(uintptr_t, i32) // In Wasm SjLj, the new function is // void __wasm_longjmp(i8*, i32) // Because the original libc longjmp function takes (jmp_buf*, i32), we need a // ptrtoint/bitcast instruction here to make the type match. jmp_buf* will // eventually be lowered to i32/i64 in the wasm backend. void WebAssemblyLowerEmscriptenEHSjLj::replaceLongjmpWith(Function *LongjmpF, Function *NewF) { assert(NewF == EmLongjmpF || NewF == WasmLongjmpF); Module *M = LongjmpF->getParent(); SmallVector ToErase; LLVMContext &C = LongjmpF->getParent()->getContext(); IRBuilder<> IRB(C); // For calls to longjmp, replace it with emscripten_longjmp/__wasm_longjmp and // cast its first argument (jmp_buf*) appropriately for (User *U : LongjmpF->users()) { auto *CI = dyn_cast(U); if (CI && CI->getCalledFunction() == LongjmpF) { IRB.SetInsertPoint(CI); Value *Env = nullptr; if (NewF == EmLongjmpF) Env = IRB.CreatePtrToInt(CI->getArgOperand(0), getAddrIntType(M), "env"); else // WasmLongjmpF Env = IRB.CreateBitCast(CI->getArgOperand(0), IRB.getInt8PtrTy(), "env"); IRB.CreateCall(NewF, {Env, CI->getArgOperand(1)}); ToErase.push_back(CI); } } for (auto *I : ToErase) I->eraseFromParent(); // If we have any remaining uses of longjmp's function pointer, replace it // with (void(*)(jmp_buf*, int))emscripten_longjmp / __wasm_longjmp. if (!LongjmpF->uses().empty()) { Value *NewLongjmp = IRB.CreateBitCast(NewF, LongjmpF->getType(), "longjmp.cast"); LongjmpF->replaceAllUsesWith(NewLongjmp); } } static bool containsLongjmpableCalls(const Function *F) { for (const auto &BB : *F) for (const auto &I : BB) if (const auto *CB = dyn_cast(&I)) if (canLongjmp(CB->getCalledOperand())) return true; return false; } // When a function contains a setjmp call but not other calls that can longjmp, // we don't do setjmp transformation for that setjmp. But we need to convert the // setjmp calls into "i32 0" so they don't cause link time errors. setjmp always // returns 0 when called directly. static void nullifySetjmp(Function *F) { Module &M = *F->getParent(); IRBuilder<> IRB(M.getContext()); Function *SetjmpF = M.getFunction("setjmp"); SmallVector ToErase; for (User *U : make_early_inc_range(SetjmpF->users())) { auto *CB = cast(U); BasicBlock *BB = CB->getParent(); if (BB->getParent() != F) // in other function continue; CallInst *CI = nullptr; // setjmp cannot throw. So if it is an invoke, lower it to a call if (auto *II = dyn_cast(CB)) CI = llvm::changeToCall(II); else CI = cast(CB); ToErase.push_back(CI); CI->replaceAllUsesWith(IRB.getInt32(0)); } for (auto *I : ToErase) I->eraseFromParent(); } bool WebAssemblyLowerEmscriptenEHSjLj::runOnModule(Module &M) { LLVM_DEBUG(dbgs() << "********** Lower Emscripten EH & SjLj **********\n"); LLVMContext &C = M.getContext(); IRBuilder<> IRB(C); Function *SetjmpF = M.getFunction("setjmp"); Function *LongjmpF = M.getFunction("longjmp"); // In some platforms _setjmp and _longjmp are used instead. Change these to // use setjmp/longjmp instead, because we later detect these functions by // their names. Function *SetjmpF2 = M.getFunction("_setjmp"); Function *LongjmpF2 = M.getFunction("_longjmp"); if (SetjmpF2) { if (SetjmpF) { if (SetjmpF->getFunctionType() != SetjmpF2->getFunctionType()) report_fatal_error("setjmp and _setjmp have different function types"); } else { SetjmpF = Function::Create(SetjmpF2->getFunctionType(), GlobalValue::ExternalLinkage, "setjmp", M); } SetjmpF2->replaceAllUsesWith(SetjmpF); } if (LongjmpF2) { if (LongjmpF) { if (LongjmpF->getFunctionType() != LongjmpF2->getFunctionType()) report_fatal_error( "longjmp and _longjmp have different function types"); } else { LongjmpF = Function::Create(LongjmpF2->getFunctionType(), GlobalValue::ExternalLinkage, "setjmp", M); } LongjmpF2->replaceAllUsesWith(LongjmpF); } auto *TPC = getAnalysisIfAvailable(); assert(TPC && "Expected a TargetPassConfig"); auto &TM = TPC->getTM(); // Declare (or get) global variables __THREW__, __threwValue, and // getTempRet0/setTempRet0 function which are used in common for both // exception handling and setjmp/longjmp handling ThrewGV = getGlobalVariable(M, getAddrIntType(&M), TM, "__THREW__"); ThrewValueGV = getGlobalVariable(M, IRB.getInt32Ty(), TM, "__threwValue"); GetTempRet0F = getEmscriptenFunction( FunctionType::get(IRB.getInt32Ty(), false), "getTempRet0", &M); SetTempRet0F = getEmscriptenFunction( FunctionType::get(IRB.getVoidTy(), IRB.getInt32Ty(), false), "setTempRet0", &M); GetTempRet0F->setDoesNotThrow(); SetTempRet0F->setDoesNotThrow(); bool Changed = false; // Function registration for exception handling if (EnableEmEH) { // Register __resumeException function FunctionType *ResumeFTy = FunctionType::get(IRB.getVoidTy(), IRB.getInt8PtrTy(), false); ResumeF = getEmscriptenFunction(ResumeFTy, "__resumeException", &M); ResumeF->addFnAttr(Attribute::NoReturn); // Register llvm_eh_typeid_for function FunctionType *EHTypeIDTy = FunctionType::get(IRB.getInt32Ty(), IRB.getInt8PtrTy(), false); EHTypeIDF = getEmscriptenFunction(EHTypeIDTy, "llvm_eh_typeid_for", &M); } // Functions that contains calls to setjmp but don't have other longjmpable // calls within them. SmallPtrSet SetjmpUsersToNullify; if ((EnableEmSjLj || EnableWasmSjLj) && SetjmpF) { // Precompute setjmp users for (User *U : SetjmpF->users()) { if (auto *CB = dyn_cast(U)) { auto *UserF = CB->getFunction(); // If a function that calls setjmp does not contain any other calls that // can longjmp, we don't need to do any transformation on that function, // so can ignore it if (containsLongjmpableCalls(UserF)) SetjmpUsers.insert(UserF); else SetjmpUsersToNullify.insert(UserF); } else { std::string S; raw_string_ostream SS(S); SS << *U; report_fatal_error(Twine("Indirect use of setjmp is not supported: ") + SS.str()); } } } bool SetjmpUsed = SetjmpF && !SetjmpUsers.empty(); bool LongjmpUsed = LongjmpF && !LongjmpF->use_empty(); DoSjLj = (EnableEmSjLj | EnableWasmSjLj) && (SetjmpUsed || LongjmpUsed); // Function registration and data pre-gathering for setjmp/longjmp handling if (DoSjLj) { assert(EnableEmSjLj || EnableWasmSjLj); if (EnableEmSjLj) { // Register emscripten_longjmp function FunctionType *FTy = FunctionType::get( IRB.getVoidTy(), {getAddrIntType(&M), IRB.getInt32Ty()}, false); EmLongjmpF = getEmscriptenFunction(FTy, "emscripten_longjmp", &M); EmLongjmpF->addFnAttr(Attribute::NoReturn); } else { // EnableWasmSjLj // Register __wasm_longjmp function, which calls __builtin_wasm_longjmp. FunctionType *FTy = FunctionType::get( IRB.getVoidTy(), {IRB.getInt8PtrTy(), IRB.getInt32Ty()}, false); WasmLongjmpF = getEmscriptenFunction(FTy, "__wasm_longjmp", &M); WasmLongjmpF->addFnAttr(Attribute::NoReturn); } if (SetjmpF) { // Register saveSetjmp function FunctionType *SetjmpFTy = SetjmpF->getFunctionType(); FunctionType *FTy = FunctionType::get(Type::getInt32PtrTy(C), {SetjmpFTy->getParamType(0), IRB.getInt32Ty(), Type::getInt32PtrTy(C), IRB.getInt32Ty()}, false); SaveSetjmpF = getEmscriptenFunction(FTy, "saveSetjmp", &M); // Register testSetjmp function FTy = FunctionType::get( IRB.getInt32Ty(), {getAddrIntType(&M), Type::getInt32PtrTy(C), IRB.getInt32Ty()}, false); TestSetjmpF = getEmscriptenFunction(FTy, "testSetjmp", &M); // wasm.catch() will be lowered down to wasm 'catch' instruction in // instruction selection. CatchF = Intrinsic::getDeclaration(&M, Intrinsic::wasm_catch); // Type for struct __WasmLongjmpArgs LongjmpArgsTy = StructType::get(IRB.getInt8PtrTy(), // env IRB.getInt32Ty() // val ); } } // Exception handling transformation if (EnableEmEH) { for (Function &F : M) { if (F.isDeclaration()) continue; Changed |= runEHOnFunction(F); } } // Setjmp/longjmp handling transformation if (DoSjLj) { Changed = true; // We have setjmp or longjmp somewhere if (LongjmpF) replaceLongjmpWith(LongjmpF, EnableEmSjLj ? EmLongjmpF : WasmLongjmpF); // Only traverse functions that uses setjmp in order not to insert // unnecessary prep / cleanup code in every function if (SetjmpF) for (Function *F : SetjmpUsers) runSjLjOnFunction(*F); } // Replace unnecessary setjmp calls with 0 if ((EnableEmSjLj || EnableWasmSjLj) && !SetjmpUsersToNullify.empty()) { Changed = true; assert(SetjmpF); for (Function *F : SetjmpUsersToNullify) nullifySetjmp(F); } // Delete unused global variables and functions for (auto *V : {ThrewGV, ThrewValueGV}) if (V && V->use_empty()) V->eraseFromParent(); for (auto *V : {GetTempRet0F, SetTempRet0F, ResumeF, EHTypeIDF, EmLongjmpF, SaveSetjmpF, TestSetjmpF, WasmLongjmpF, CatchF}) if (V && V->use_empty()) V->eraseFromParent(); return Changed; } bool WebAssemblyLowerEmscriptenEHSjLj::runEHOnFunction(Function &F) { Module &M = *F.getParent(); LLVMContext &C = F.getContext(); IRBuilder<> IRB(C); bool Changed = false; SmallVector ToErase; SmallPtrSet LandingPads; // rethrow.longjmp BB that will be shared within the function. BasicBlock *RethrowLongjmpBB = nullptr; // PHI node for the loaded value of __THREW__ global variable in // rethrow.longjmp BB PHINode *RethrowLongjmpBBThrewPHI = nullptr; for (BasicBlock &BB : F) { auto *II = dyn_cast(BB.getTerminator()); if (!II) continue; Changed = true; LandingPads.insert(II->getLandingPadInst()); IRB.SetInsertPoint(II); const Value *Callee = II->getCalledOperand(); bool NeedInvoke = supportsException(&F) && canThrow(Callee); if (NeedInvoke) { // Wrap invoke with invoke wrapper and generate preamble/postamble Value *Threw = wrapInvoke(II); ToErase.push_back(II); // If setjmp/longjmp handling is enabled, the thrown value can be not an // exception but a longjmp. If the current function contains calls to // setjmp, it will be appropriately handled in runSjLjOnFunction. But even // if the function does not contain setjmp calls, we shouldn't silently // ignore longjmps; we should rethrow them so they can be correctly // handled in somewhere up the call chain where setjmp is. __THREW__'s // value is 0 when nothing happened, 1 when an exception is thrown, and // other values when longjmp is thrown. // // if (%__THREW__.val == 0 || %__THREW__.val == 1) // goto %tail // else // goto %longjmp.rethrow // // rethrow.longjmp: ;; This is longjmp. Rethrow it // %__threwValue.val = __threwValue // emscripten_longjmp(%__THREW__.val, %__threwValue.val); // // tail: ;; Nothing happened or an exception is thrown // ... Continue exception handling ... if (DoSjLj && EnableEmSjLj && !SetjmpUsers.count(&F) && canLongjmp(Callee)) { // Create longjmp.rethrow BB once and share it within the function if (!RethrowLongjmpBB) { RethrowLongjmpBB = BasicBlock::Create(C, "rethrow.longjmp", &F); IRB.SetInsertPoint(RethrowLongjmpBB); RethrowLongjmpBBThrewPHI = IRB.CreatePHI(getAddrIntType(&M), 4, "threw.phi"); RethrowLongjmpBBThrewPHI->addIncoming(Threw, &BB); Value *ThrewValue = IRB.CreateLoad(IRB.getInt32Ty(), ThrewValueGV, ThrewValueGV->getName() + ".val"); IRB.CreateCall(EmLongjmpF, {RethrowLongjmpBBThrewPHI, ThrewValue}); IRB.CreateUnreachable(); } else { RethrowLongjmpBBThrewPHI->addIncoming(Threw, &BB); } IRB.SetInsertPoint(II); // Restore the insert point back BasicBlock *Tail = BasicBlock::Create(C, "tail", &F); Value *CmpEqOne = IRB.CreateICmpEQ(Threw, getAddrSizeInt(&M, 1), "cmp.eq.one"); Value *CmpEqZero = IRB.CreateICmpEQ(Threw, getAddrSizeInt(&M, 0), "cmp.eq.zero"); Value *Or = IRB.CreateOr(CmpEqZero, CmpEqOne, "or"); IRB.CreateCondBr(Or, Tail, RethrowLongjmpBB); IRB.SetInsertPoint(Tail); BB.replaceSuccessorsPhiUsesWith(&BB, Tail); } // Insert a branch based on __THREW__ variable Value *Cmp = IRB.CreateICmpEQ(Threw, getAddrSizeInt(&M, 1), "cmp"); IRB.CreateCondBr(Cmp, II->getUnwindDest(), II->getNormalDest()); } else { // This can't throw, and we don't need this invoke, just replace it with a // call+branch changeToCall(II); } } // Process resume instructions for (BasicBlock &BB : F) { // Scan the body of the basic block for resumes for (Instruction &I : BB) { auto *RI = dyn_cast(&I); if (!RI) continue; Changed = true; // Split the input into legal values Value *Input = RI->getValue(); IRB.SetInsertPoint(RI); Value *Low = IRB.CreateExtractValue(Input, 0, "low"); // Create a call to __resumeException function IRB.CreateCall(ResumeF, {Low}); // Add a terminator to the block IRB.CreateUnreachable(); ToErase.push_back(RI); } } // Process llvm.eh.typeid.for intrinsics for (BasicBlock &BB : F) { for (Instruction &I : BB) { auto *CI = dyn_cast(&I); if (!CI) continue; const Function *Callee = CI->getCalledFunction(); if (!Callee) continue; if (Callee->getIntrinsicID() != Intrinsic::eh_typeid_for) continue; Changed = true; IRB.SetInsertPoint(CI); CallInst *NewCI = IRB.CreateCall(EHTypeIDF, CI->getArgOperand(0), "typeid"); CI->replaceAllUsesWith(NewCI); ToErase.push_back(CI); } } // Look for orphan landingpads, can occur in blocks with no predecessors for (BasicBlock &BB : F) { Instruction *I = BB.getFirstNonPHI(); if (auto *LPI = dyn_cast(I)) LandingPads.insert(LPI); } Changed |= !LandingPads.empty(); // Handle all the landingpad for this function together, as multiple invokes // may share a single lp for (LandingPadInst *LPI : LandingPads) { IRB.SetInsertPoint(LPI); SmallVector FMCArgs; for (unsigned I = 0, E = LPI->getNumClauses(); I < E; ++I) { Constant *Clause = LPI->getClause(I); // TODO Handle filters (= exception specifications). // https://github.com/llvm/llvm-project/issues/49740 if (LPI->isCatch(I)) FMCArgs.push_back(Clause); } // Create a call to __cxa_find_matching_catch_N function Function *FMCF = getFindMatchingCatch(M, FMCArgs.size()); CallInst *FMCI = IRB.CreateCall(FMCF, FMCArgs, "fmc"); Value *Poison = PoisonValue::get(LPI->getType()); Value *Pair0 = IRB.CreateInsertValue(Poison, FMCI, 0, "pair0"); Value *TempRet0 = IRB.CreateCall(GetTempRet0F, std::nullopt, "tempret0"); Value *Pair1 = IRB.CreateInsertValue(Pair0, TempRet0, 1, "pair1"); LPI->replaceAllUsesWith(Pair1); ToErase.push_back(LPI); } // Erase everything we no longer need in this function for (Instruction *I : ToErase) I->eraseFromParent(); return Changed; } // This tries to get debug info from the instruction before which a new // instruction will be inserted, and if there's no debug info in that // instruction, tries to get the info instead from the previous instruction (if // any). If none of these has debug info and a DISubprogram is provided, it // creates a dummy debug info with the first line of the function, because IR // verifier requires all inlinable callsites should have debug info when both a // caller and callee have DISubprogram. If none of these conditions are met, // returns empty info. static DebugLoc getOrCreateDebugLoc(const Instruction *InsertBefore, DISubprogram *SP) { assert(InsertBefore); if (InsertBefore->getDebugLoc()) return InsertBefore->getDebugLoc(); const Instruction *Prev = InsertBefore->getPrevNode(); if (Prev && Prev->getDebugLoc()) return Prev->getDebugLoc(); if (SP) return DILocation::get(SP->getContext(), SP->getLine(), 1, SP); return DebugLoc(); } bool WebAssemblyLowerEmscriptenEHSjLj::runSjLjOnFunction(Function &F) { assert(EnableEmSjLj || EnableWasmSjLj); Module &M = *F.getParent(); LLVMContext &C = F.getContext(); IRBuilder<> IRB(C); SmallVector ToErase; // Vector of %setjmpTable values SmallVector SetjmpTableInsts; // Vector of %setjmpTableSize values SmallVector SetjmpTableSizeInsts; // Setjmp preparation // This instruction effectively means %setjmpTableSize = 4. // We create this as an instruction intentionally, and we don't want to fold // this instruction to a constant 4, because this value will be used in // SSAUpdater.AddAvailableValue(...) later. BasicBlock *Entry = &F.getEntryBlock(); DebugLoc FirstDL = getOrCreateDebugLoc(&*Entry->begin(), F.getSubprogram()); SplitBlock(Entry, &*Entry->getFirstInsertionPt()); BinaryOperator *SetjmpTableSize = BinaryOperator::Create(Instruction::Add, IRB.getInt32(4), IRB.getInt32(0), "setjmpTableSize", Entry->getTerminator()); SetjmpTableSize->setDebugLoc(FirstDL); // setjmpTable = (int *) malloc(40); Type *IntPtrTy = getAddrIntType(&M); Constant *size = ConstantInt::get(IntPtrTy, 40); Instruction *SetjmpTable = CallInst::CreateMalloc(SetjmpTableSize, IntPtrTy, IRB.getInt32Ty(), size, nullptr, nullptr, "setjmpTable"); SetjmpTable->setDebugLoc(FirstDL); // CallInst::CreateMalloc may return a bitcast instruction if the result types // mismatch. We need to set the debug loc for the original call too. auto *MallocCall = SetjmpTable->stripPointerCasts(); if (auto *MallocCallI = dyn_cast(MallocCall)) { MallocCallI->setDebugLoc(FirstDL); } // setjmpTable[0] = 0; IRB.SetInsertPoint(SetjmpTableSize); IRB.CreateStore(IRB.getInt32(0), SetjmpTable); SetjmpTableInsts.push_back(SetjmpTable); SetjmpTableSizeInsts.push_back(SetjmpTableSize); // Setjmp transformation SmallVector SetjmpRetPHIs; Function *SetjmpF = M.getFunction("setjmp"); for (auto *U : make_early_inc_range(SetjmpF->users())) { auto *CB = cast(U); BasicBlock *BB = CB->getParent(); if (BB->getParent() != &F) // in other function continue; if (CB->getOperandBundle(LLVMContext::OB_funclet)) { std::string S; raw_string_ostream SS(S); SS << "In function " + F.getName() + ": setjmp within a catch clause is not supported in Wasm EH:\n"; SS << *CB; report_fatal_error(StringRef(SS.str())); } CallInst *CI = nullptr; // setjmp cannot throw. So if it is an invoke, lower it to a call if (auto *II = dyn_cast(CB)) CI = llvm::changeToCall(II); else CI = cast(CB); // The tail is everything right after the call, and will be reached once // when setjmp is called, and later when longjmp returns to the setjmp BasicBlock *Tail = SplitBlock(BB, CI->getNextNode()); // Add a phi to the tail, which will be the output of setjmp, which // indicates if this is the first call or a longjmp back. The phi directly // uses the right value based on where we arrive from IRB.SetInsertPoint(Tail->getFirstNonPHI()); PHINode *SetjmpRet = IRB.CreatePHI(IRB.getInt32Ty(), 2, "setjmp.ret"); // setjmp initial call returns 0 SetjmpRet->addIncoming(IRB.getInt32(0), BB); // The proper output is now this, not the setjmp call itself CI->replaceAllUsesWith(SetjmpRet); // longjmp returns to the setjmp will add themselves to this phi SetjmpRetPHIs.push_back(SetjmpRet); // Fix call target // Our index in the function is our place in the array + 1 to avoid index // 0, because index 0 means the longjmp is not ours to handle. IRB.SetInsertPoint(CI); Value *Args[] = {CI->getArgOperand(0), IRB.getInt32(SetjmpRetPHIs.size()), SetjmpTable, SetjmpTableSize}; Instruction *NewSetjmpTable = IRB.CreateCall(SaveSetjmpF, Args, "setjmpTable"); Instruction *NewSetjmpTableSize = IRB.CreateCall(GetTempRet0F, std::nullopt, "setjmpTableSize"); SetjmpTableInsts.push_back(NewSetjmpTable); SetjmpTableSizeInsts.push_back(NewSetjmpTableSize); ToErase.push_back(CI); } // Handle longjmpable calls. if (EnableEmSjLj) handleLongjmpableCallsForEmscriptenSjLj( F, SetjmpTableInsts, SetjmpTableSizeInsts, SetjmpRetPHIs); else // EnableWasmSjLj handleLongjmpableCallsForWasmSjLj(F, SetjmpTableInsts, SetjmpTableSizeInsts, SetjmpRetPHIs); // Erase everything we no longer need in this function for (Instruction *I : ToErase) I->eraseFromParent(); // Free setjmpTable buffer before each return instruction + function-exiting // call SmallVector ExitingInsts; for (BasicBlock &BB : F) { Instruction *TI = BB.getTerminator(); if (isa(TI)) ExitingInsts.push_back(TI); // Any 'call' instruction with 'noreturn' attribute exits the function at // this point. If this throws but unwinds to another EH pad within this // function instead of exiting, this would have been an 'invoke', which // happens if we use Wasm EH or Wasm SjLJ. for (auto &I : BB) { if (auto *CI = dyn_cast(&I)) { bool IsNoReturn = CI->hasFnAttr(Attribute::NoReturn); if (Function *CalleeF = CI->getCalledFunction()) IsNoReturn |= CalleeF->hasFnAttribute(Attribute::NoReturn); if (IsNoReturn) ExitingInsts.push_back(&I); } } } for (auto *I : ExitingInsts) { DebugLoc DL = getOrCreateDebugLoc(I, F.getSubprogram()); // If this existing instruction is a call within a catchpad, we should add // it as "funclet" to the operand bundle of 'free' call SmallVector Bundles; if (auto *CB = dyn_cast(I)) if (auto Bundle = CB->getOperandBundle(LLVMContext::OB_funclet)) Bundles.push_back(OperandBundleDef(*Bundle)); auto *Free = CallInst::CreateFree(SetjmpTable, Bundles, I); Free->setDebugLoc(DL); // CallInst::CreateFree may create a bitcast instruction if its argument // types mismatch. We need to set the debug loc for the bitcast too. if (auto *FreeCallI = dyn_cast(Free)) { if (auto *BitCastI = dyn_cast(FreeCallI->getArgOperand(0))) BitCastI->setDebugLoc(DL); } } // Every call to saveSetjmp can change setjmpTable and setjmpTableSize // (when buffer reallocation occurs) // entry: // setjmpTableSize = 4; // setjmpTable = (int *) malloc(40); // setjmpTable[0] = 0; // ... // somebb: // setjmpTable = saveSetjmp(env, label, setjmpTable, setjmpTableSize); // setjmpTableSize = getTempRet0(); // So we need to make sure the SSA for these variables is valid so that every // saveSetjmp and testSetjmp calls have the correct arguments. SSAUpdater SetjmpTableSSA; SSAUpdater SetjmpTableSizeSSA; SetjmpTableSSA.Initialize(Type::getInt32PtrTy(C), "setjmpTable"); SetjmpTableSizeSSA.Initialize(Type::getInt32Ty(C), "setjmpTableSize"); for (Instruction *I : SetjmpTableInsts) SetjmpTableSSA.AddAvailableValue(I->getParent(), I); for (Instruction *I : SetjmpTableSizeInsts) SetjmpTableSizeSSA.AddAvailableValue(I->getParent(), I); for (auto &U : make_early_inc_range(SetjmpTable->uses())) if (auto *I = dyn_cast(U.getUser())) if (I->getParent() != Entry) SetjmpTableSSA.RewriteUse(U); for (auto &U : make_early_inc_range(SetjmpTableSize->uses())) if (auto *I = dyn_cast(U.getUser())) if (I->getParent() != Entry) SetjmpTableSizeSSA.RewriteUse(U); // Finally, our modifications to the cfg can break dominance of SSA variables. // For example, in this code, // if (x()) { .. setjmp() .. } // if (y()) { .. longjmp() .. } // We must split the longjmp block, and it can jump into the block splitted // from setjmp one. But that means that when we split the setjmp block, it's // first part no longer dominates its second part - there is a theoretically // possible control flow path where x() is false, then y() is true and we // reach the second part of the setjmp block, without ever reaching the first // part. So, we rebuild SSA form here. rebuildSSA(F); return true; } // Update each call that can longjmp so it can return to the corresponding // setjmp. Refer to 4) of "Emscripten setjmp/longjmp handling" section in the // comments at top of the file for details. void WebAssemblyLowerEmscriptenEHSjLj::handleLongjmpableCallsForEmscriptenSjLj( Function &F, InstVector &SetjmpTableInsts, InstVector &SetjmpTableSizeInsts, SmallVectorImpl &SetjmpRetPHIs) { Module &M = *F.getParent(); LLVMContext &C = F.getContext(); IRBuilder<> IRB(C); SmallVector ToErase; // We need to pass setjmpTable and setjmpTableSize to testSetjmp function. // These values are defined in the beginning of the function and also in each // setjmp callsite, but we don't know which values we should use at this // point. So here we arbitraily use the ones defined in the beginning of the // function, and SSAUpdater will later update them to the correct values. Instruction *SetjmpTable = *SetjmpTableInsts.begin(); Instruction *SetjmpTableSize = *SetjmpTableSizeInsts.begin(); // call.em.longjmp BB that will be shared within the function. BasicBlock *CallEmLongjmpBB = nullptr; // PHI node for the loaded value of __THREW__ global variable in // call.em.longjmp BB PHINode *CallEmLongjmpBBThrewPHI = nullptr; // PHI node for the loaded value of __threwValue global variable in // call.em.longjmp BB PHINode *CallEmLongjmpBBThrewValuePHI = nullptr; // rethrow.exn BB that will be shared within the function. BasicBlock *RethrowExnBB = nullptr; // Because we are creating new BBs while processing and don't want to make // all these newly created BBs candidates again for longjmp processing, we // first make the vector of candidate BBs. std::vector BBs; for (BasicBlock &BB : F) BBs.push_back(&BB); // BBs.size() will change within the loop, so we query it every time for (unsigned I = 0; I < BBs.size(); I++) { BasicBlock *BB = BBs[I]; for (Instruction &I : *BB) { if (isa(&I)) { std::string S; raw_string_ostream SS(S); SS << "In function " << F.getName() << ": When using Wasm EH with Emscripten SjLj, there is a " "restriction that `setjmp` function call and exception cannot be " "used within the same function:\n"; SS << I; report_fatal_error(StringRef(SS.str())); } auto *CI = dyn_cast(&I); if (!CI) continue; const Value *Callee = CI->getCalledOperand(); if (!canLongjmp(Callee)) continue; if (isEmAsmCall(Callee)) report_fatal_error("Cannot use EM_ASM* alongside setjmp/longjmp in " + F.getName() + ". Please consider using EM_JS, or move the " "EM_ASM into another function.", false); Value *Threw = nullptr; BasicBlock *Tail; if (Callee->getName().startswith("__invoke_")) { // If invoke wrapper has already been generated for this call in // previous EH phase, search for the load instruction // %__THREW__.val = __THREW__; // in postamble after the invoke wrapper call LoadInst *ThrewLI = nullptr; StoreInst *ThrewResetSI = nullptr; for (auto I = std::next(BasicBlock::iterator(CI)), IE = BB->end(); I != IE; ++I) { if (auto *LI = dyn_cast(I)) if (auto *GV = dyn_cast(LI->getPointerOperand())) if (GV == ThrewGV) { Threw = ThrewLI = LI; break; } } // Search for the store instruction after the load above // __THREW__ = 0; for (auto I = std::next(BasicBlock::iterator(ThrewLI)), IE = BB->end(); I != IE; ++I) { if (auto *SI = dyn_cast(I)) { if (auto *GV = dyn_cast(SI->getPointerOperand())) { if (GV == ThrewGV && SI->getValueOperand() == getAddrSizeInt(&M, 0)) { ThrewResetSI = SI; break; } } } } assert(Threw && ThrewLI && "Cannot find __THREW__ load after invoke"); assert(ThrewResetSI && "Cannot find __THREW__ store after invoke"); Tail = SplitBlock(BB, ThrewResetSI->getNextNode()); } else { // Wrap call with invoke wrapper and generate preamble/postamble Threw = wrapInvoke(CI); ToErase.push_back(CI); Tail = SplitBlock(BB, CI->getNextNode()); // If exception handling is enabled, the thrown value can be not a // longjmp but an exception, in which case we shouldn't silently ignore // exceptions; we should rethrow them. // __THREW__'s value is 0 when nothing happened, 1 when an exception is // thrown, other values when longjmp is thrown. // // if (%__THREW__.val == 1) // goto %eh.rethrow // else // goto %normal // // eh.rethrow: ;; Rethrow exception // %exn = call @__cxa_find_matching_catch_2() ;; Retrieve thrown ptr // __resumeException(%exn) // // normal: // <-- Insertion point. Will insert sjlj handling code from here // goto %tail // // tail: // ... if (supportsException(&F) && canThrow(Callee)) { // We will add a new conditional branch. So remove the branch created // when we split the BB ToErase.push_back(BB->getTerminator()); // Generate rethrow.exn BB once and share it within the function if (!RethrowExnBB) { RethrowExnBB = BasicBlock::Create(C, "rethrow.exn", &F); IRB.SetInsertPoint(RethrowExnBB); CallInst *Exn = IRB.CreateCall(getFindMatchingCatch(M, 0), {}, "exn"); IRB.CreateCall(ResumeF, {Exn}); IRB.CreateUnreachable(); } IRB.SetInsertPoint(CI); BasicBlock *NormalBB = BasicBlock::Create(C, "normal", &F); Value *CmpEqOne = IRB.CreateICmpEQ(Threw, getAddrSizeInt(&M, 1), "cmp.eq.one"); IRB.CreateCondBr(CmpEqOne, RethrowExnBB, NormalBB); IRB.SetInsertPoint(NormalBB); IRB.CreateBr(Tail); BB = NormalBB; // New insertion point to insert testSetjmp() } } // We need to replace the terminator in Tail - SplitBlock makes BB go // straight to Tail, we need to check if a longjmp occurred, and go to the // right setjmp-tail if so ToErase.push_back(BB->getTerminator()); // Generate a function call to testSetjmp function and preamble/postamble // code to figure out (1) whether longjmp occurred (2) if longjmp // occurred, which setjmp it corresponds to Value *Label = nullptr; Value *LongjmpResult = nullptr; BasicBlock *EndBB = nullptr; wrapTestSetjmp(BB, CI->getDebugLoc(), Threw, SetjmpTable, SetjmpTableSize, Label, LongjmpResult, CallEmLongjmpBB, CallEmLongjmpBBThrewPHI, CallEmLongjmpBBThrewValuePHI, EndBB); assert(Label && LongjmpResult && EndBB); // Create switch instruction IRB.SetInsertPoint(EndBB); IRB.SetCurrentDebugLocation(EndBB->back().getDebugLoc()); SwitchInst *SI = IRB.CreateSwitch(Label, Tail, SetjmpRetPHIs.size()); // -1 means no longjmp happened, continue normally (will hit the default // switch case). 0 means a longjmp that is not ours to handle, needs a // rethrow. Otherwise the index is the same as the index in P+1 (to avoid // 0). for (unsigned I = 0; I < SetjmpRetPHIs.size(); I++) { SI->addCase(IRB.getInt32(I + 1), SetjmpRetPHIs[I]->getParent()); SetjmpRetPHIs[I]->addIncoming(LongjmpResult, EndBB); } // We are splitting the block here, and must continue to find other calls // in the block - which is now split. so continue to traverse in the Tail BBs.push_back(Tail); } } for (Instruction *I : ToErase) I->eraseFromParent(); } static BasicBlock *getCleanupRetUnwindDest(const CleanupPadInst *CPI) { for (const User *U : CPI->users()) if (const auto *CRI = dyn_cast(U)) return CRI->getUnwindDest(); return nullptr; } // Create a catchpad in which we catch a longjmp's env and val arguments, test // if the longjmp corresponds to one of setjmps in the current function, and if // so, jump to the setjmp dispatch BB from which we go to one of post-setjmp // BBs. Refer to 4) of "Wasm setjmp/longjmp handling" section in the comments at // top of the file for details. void WebAssemblyLowerEmscriptenEHSjLj::handleLongjmpableCallsForWasmSjLj( Function &F, InstVector &SetjmpTableInsts, InstVector &SetjmpTableSizeInsts, SmallVectorImpl &SetjmpRetPHIs) { Module &M = *F.getParent(); LLVMContext &C = F.getContext(); IRBuilder<> IRB(C); // A function with catchswitch/catchpad instruction should have a personality // function attached to it. Search for the wasm personality function, and if // it exists, use it, and if it doesn't, create a dummy personality function. // (SjLj is not going to call it anyway.) if (!F.hasPersonalityFn()) { StringRef PersName = getEHPersonalityName(EHPersonality::Wasm_CXX); FunctionType *PersType = FunctionType::get(IRB.getInt32Ty(), /* isVarArg */ true); Value *PersF = M.getOrInsertFunction(PersName, PersType).getCallee(); F.setPersonalityFn( cast(IRB.CreateBitCast(PersF, IRB.getInt8PtrTy()))); } // Use the entry BB's debugloc as a fallback BasicBlock *Entry = &F.getEntryBlock(); DebugLoc FirstDL = getOrCreateDebugLoc(&*Entry->begin(), F.getSubprogram()); IRB.SetCurrentDebugLocation(FirstDL); // Arbitrarily use the ones defined in the beginning of the function. // SSAUpdater will later update them to the correct values. Instruction *SetjmpTable = *SetjmpTableInsts.begin(); Instruction *SetjmpTableSize = *SetjmpTableSizeInsts.begin(); // Add setjmp.dispatch BB right after the entry block. Because we have // initialized setjmpTable/setjmpTableSize in the entry block and split the // rest into another BB, here 'OrigEntry' is the function's original entry // block before the transformation. // // entry: // setjmpTable / setjmpTableSize initialization // setjmp.dispatch: // switch will be inserted here later // entry.split: (OrigEntry) // the original function starts here BasicBlock *OrigEntry = Entry->getNextNode(); BasicBlock *SetjmpDispatchBB = BasicBlock::Create(C, "setjmp.dispatch", &F, OrigEntry); cast(Entry->getTerminator())->setSuccessor(0, SetjmpDispatchBB); // Create catch.dispatch.longjmp BB and a catchswitch instruction BasicBlock *CatchDispatchLongjmpBB = BasicBlock::Create(C, "catch.dispatch.longjmp", &F); IRB.SetInsertPoint(CatchDispatchLongjmpBB); CatchSwitchInst *CatchSwitchLongjmp = IRB.CreateCatchSwitch(ConstantTokenNone::get(C), nullptr, 1); // Create catch.longjmp BB and a catchpad instruction BasicBlock *CatchLongjmpBB = BasicBlock::Create(C, "catch.longjmp", &F); CatchSwitchLongjmp->addHandler(CatchLongjmpBB); IRB.SetInsertPoint(CatchLongjmpBB); CatchPadInst *CatchPad = IRB.CreateCatchPad(CatchSwitchLongjmp, {}); // Wasm throw and catch instructions can throw and catch multiple values, but // that requires multivalue support in the toolchain, which is currently not // very reliable. We instead throw and catch a pointer to a struct value of // type 'struct __WasmLongjmpArgs', which is defined in Emscripten. Instruction *LongjmpArgs = IRB.CreateCall(CatchF, {IRB.getInt32(WebAssembly::C_LONGJMP)}, "thrown"); Value *EnvField = IRB.CreateConstGEP2_32(LongjmpArgsTy, LongjmpArgs, 0, 0, "env_gep"); Value *ValField = IRB.CreateConstGEP2_32(LongjmpArgsTy, LongjmpArgs, 0, 1, "val_gep"); // void *env = __wasm_longjmp_args.env; Instruction *Env = IRB.CreateLoad(IRB.getInt8PtrTy(), EnvField, "env"); // int val = __wasm_longjmp_args.val; Instruction *Val = IRB.CreateLoad(IRB.getInt32Ty(), ValField, "val"); // %label = testSetjmp(mem[%env], setjmpTable, setjmpTableSize); // if (%label == 0) // __wasm_longjmp(%env, %val) // catchret to %setjmp.dispatch BasicBlock *ThenBB = BasicBlock::Create(C, "if.then", &F); BasicBlock *EndBB = BasicBlock::Create(C, "if.end", &F); Value *EnvP = IRB.CreateBitCast(Env, getAddrPtrType(&M), "env.p"); Value *SetjmpID = IRB.CreateLoad(getAddrIntType(&M), EnvP, "setjmp.id"); Value *Label = IRB.CreateCall(TestSetjmpF, {SetjmpID, SetjmpTable, SetjmpTableSize}, OperandBundleDef("funclet", CatchPad), "label"); Value *Cmp = IRB.CreateICmpEQ(Label, IRB.getInt32(0)); IRB.CreateCondBr(Cmp, ThenBB, EndBB); IRB.SetInsertPoint(ThenBB); CallInst *WasmLongjmpCI = IRB.CreateCall( WasmLongjmpF, {Env, Val}, OperandBundleDef("funclet", CatchPad)); IRB.CreateUnreachable(); IRB.SetInsertPoint(EndBB); // Jump to setjmp.dispatch block IRB.CreateCatchRet(CatchPad, SetjmpDispatchBB); // Go back to setjmp.dispatch BB // setjmp.dispatch: // switch %label { // label 1: goto post-setjmp BB 1 // label 2: goto post-setjmp BB 2 // ... // default: goto splitted next BB // } IRB.SetInsertPoint(SetjmpDispatchBB); PHINode *LabelPHI = IRB.CreatePHI(IRB.getInt32Ty(), 2, "label.phi"); LabelPHI->addIncoming(Label, EndBB); LabelPHI->addIncoming(IRB.getInt32(-1), Entry); SwitchInst *SI = IRB.CreateSwitch(LabelPHI, OrigEntry, SetjmpRetPHIs.size()); // -1 means no longjmp happened, continue normally (will hit the default // switch case). 0 means a longjmp that is not ours to handle, needs a // rethrow. Otherwise the index is the same as the index in P+1 (to avoid // 0). for (unsigned I = 0; I < SetjmpRetPHIs.size(); I++) { SI->addCase(IRB.getInt32(I + 1), SetjmpRetPHIs[I]->getParent()); SetjmpRetPHIs[I]->addIncoming(Val, SetjmpDispatchBB); } // Convert all longjmpable call instructions to invokes that unwind to the // newly created catch.dispatch.longjmp BB. SmallVector LongjmpableCalls; for (auto *BB = &*F.begin(); BB; BB = BB->getNextNode()) { for (auto &I : *BB) { auto *CI = dyn_cast(&I); if (!CI) continue; const Value *Callee = CI->getCalledOperand(); if (!canLongjmp(Callee)) continue; if (isEmAsmCall(Callee)) report_fatal_error("Cannot use EM_ASM* alongside setjmp/longjmp in " + F.getName() + ". Please consider using EM_JS, or move the " "EM_ASM into another function.", false); // This is __wasm_longjmp() call we inserted in this function, which // rethrows the longjmp when the longjmp does not correspond to one of // setjmps in this function. We should not convert this call to an invoke. if (CI == WasmLongjmpCI) continue; LongjmpableCalls.push_back(CI); } } for (auto *CI : LongjmpableCalls) { // Even if the callee function has attribute 'nounwind', which is true for // all C functions, it can longjmp, which means it can throw a Wasm // exception now. CI->removeFnAttr(Attribute::NoUnwind); if (Function *CalleeF = CI->getCalledFunction()) CalleeF->removeFnAttr(Attribute::NoUnwind); // Change it to an invoke and make it unwind to the catch.dispatch.longjmp // BB. If the call is enclosed in another catchpad/cleanuppad scope, unwind // to its parent pad's unwind destination instead to preserve the scope // structure. It will eventually unwind to the catch.dispatch.longjmp. SmallVector Bundles; BasicBlock *UnwindDest = nullptr; if (auto Bundle = CI->getOperandBundle(LLVMContext::OB_funclet)) { Instruction *FromPad = cast(Bundle->Inputs[0]); while (!UnwindDest) { if (auto *CPI = dyn_cast(FromPad)) { UnwindDest = CPI->getCatchSwitch()->getUnwindDest(); break; } if (auto *CPI = dyn_cast(FromPad)) { // getCleanupRetUnwindDest() can return nullptr when // 1. This cleanuppad's matching cleanupret uwninds to caller // 2. There is no matching cleanupret because it ends with // unreachable. // In case of 2, we need to traverse the parent pad chain. UnwindDest = getCleanupRetUnwindDest(CPI); Value *ParentPad = CPI->getParentPad(); if (isa(ParentPad)) break; FromPad = cast(ParentPad); } } } if (!UnwindDest) UnwindDest = CatchDispatchLongjmpBB; changeToInvokeAndSplitBasicBlock(CI, UnwindDest); } SmallVector ToErase; for (auto &BB : F) { if (auto *CSI = dyn_cast(BB.getFirstNonPHI())) { if (CSI != CatchSwitchLongjmp && CSI->unwindsToCaller()) { IRB.SetInsertPoint(CSI); ToErase.push_back(CSI); auto *NewCSI = IRB.CreateCatchSwitch(CSI->getParentPad(), CatchDispatchLongjmpBB, 1); NewCSI->addHandler(*CSI->handler_begin()); NewCSI->takeName(CSI); CSI->replaceAllUsesWith(NewCSI); } } if (auto *CRI = dyn_cast(BB.getTerminator())) { if (CRI->unwindsToCaller()) { IRB.SetInsertPoint(CRI); ToErase.push_back(CRI); IRB.CreateCleanupRet(CRI->getCleanupPad(), CatchDispatchLongjmpBB); } } } for (Instruction *I : ToErase) I->eraseFromParent(); }