/* $NetBSD: parse.c,v 1.526 2021/01/10 21:20:46 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Parsing of makefiles. * * Parse_File is the main entry point and controls most of the other * functions in this module. * * The directories for the .include "..." directive are kept in * 'parseIncPath', while those for .include <...> are kept in 'sysIncPath'. * The targets currently being defined are kept in 'targets'. * * Interface: * Parse_Init Initialize the module * * Parse_End Clean up the module * * Parse_File Parse a top-level makefile. Included files are * handled by Parse_include_file though. * * Parse_IsVar Return TRUE if the given line is a variable * assignment. Used by MainParseArgs to determine if * an argument is a target or a variable assignment. * Used internally for pretty much the same thing. * * Parse_Error Report a parse error, a warning or an informational * message. * * Parse_MainName Returns a list of the main target to create. */ #include #include #include #include #include "make.h" #ifdef HAVE_STDINT_H #include #endif #ifdef HAVE_MMAP #include #ifndef MAP_COPY #define MAP_COPY MAP_PRIVATE #endif #ifndef MAP_FILE #define MAP_FILE 0 #endif #endif #include "dir.h" #include "job.h" #include "pathnames.h" /* "@(#)parse.c 8.3 (Berkeley) 3/19/94" */ MAKE_RCSID("$NetBSD: parse.c,v 1.526 2021/01/10 21:20:46 rillig Exp $"); /* types and constants */ /* * Structure for a file being read ("included file") */ typedef struct IFile { char *fname; /* name of file (relative? absolute?) */ Boolean fromForLoop; /* simulated .include by the .for loop */ int lineno; /* current line number in file */ int first_lineno; /* line number of start of text */ unsigned int cond_depth; /* 'if' nesting when file opened */ Boolean depending; /* state of doing_depend on EOF */ /* The buffer from which the file's content is read. */ char *buf_freeIt; char *buf_ptr; /* next char to be read */ char *buf_end; /* Function to read more data, with a single opaque argument. */ ReadMoreProc readMore; void *readMoreArg; struct loadedfile *lf; /* loadedfile object, if any */ } IFile; /* * Tokens for target attributes */ typedef enum ParseSpecial { SP_ATTRIBUTE, /* Generic attribute */ SP_BEGIN, /* .BEGIN */ SP_DEFAULT, /* .DEFAULT */ SP_DELETE_ON_ERROR, /* .DELETE_ON_ERROR */ SP_END, /* .END */ SP_ERROR, /* .ERROR */ SP_IGNORE, /* .IGNORE */ SP_INCLUDES, /* .INCLUDES; not mentioned in the manual page */ SP_INTERRUPT, /* .INTERRUPT */ SP_LIBS, /* .LIBS; not mentioned in the manual page */ /* .MAIN and we don't have anything user-specified to make */ SP_MAIN, SP_META, /* .META */ SP_MFLAGS, /* .MFLAGS or .MAKEFLAGS */ SP_NOMETA, /* .NOMETA */ SP_NOMETA_CMP, /* .NOMETA_CMP */ SP_NOPATH, /* .NOPATH */ SP_NOT, /* Not special */ SP_NOTPARALLEL, /* .NOTPARALLEL or .NO_PARALLEL */ SP_NULL, /* .NULL; not mentioned in the manual page */ SP_OBJDIR, /* .OBJDIR */ SP_ORDER, /* .ORDER */ SP_PARALLEL, /* .PARALLEL; not mentioned in the manual page */ SP_PATH, /* .PATH or .PATH.suffix */ SP_PHONY, /* .PHONY */ #ifdef POSIX SP_POSIX, /* .POSIX; not mentioned in the manual page */ #endif SP_PRECIOUS, /* .PRECIOUS */ SP_SHELL, /* .SHELL */ SP_SILENT, /* .SILENT */ SP_SINGLESHELL, /* .SINGLESHELL; not mentioned in the manual page */ SP_STALE, /* .STALE */ SP_SUFFIXES, /* .SUFFIXES */ SP_WAIT /* .WAIT */ } ParseSpecial; typedef List SearchPathList; typedef ListNode SearchPathListNode; /* result data */ /* * The main target to create. This is the first target on the first * dependency line in the first makefile. */ static GNode *mainNode; /* eval state */ /* * During parsing, the targets from the left-hand side of the currently * active dependency line, or NULL if the current line does not belong to a * dependency line, for example because it is a variable assignment. * * See unit-tests/deptgt.mk, keyword "parse.c:targets". */ static GNodeList *targets; #ifdef CLEANUP /* * All shell commands for all targets, in no particular order and possibly * with duplicates. Kept in a separate list since the commands from .USE or * .USEBEFORE nodes are shared with other GNodes, thereby giving up the * easily understandable ownership over the allocated strings. */ static StringList targCmds = LST_INIT; #endif /* * Predecessor node for handling .ORDER. Initialized to NULL when .ORDER * seen, then set to each successive source on the line. */ static GNode *order_pred; /* parser state */ /* number of fatal errors */ static int fatals = 0; /* * Variables for doing includes */ /* * The include chain of makefiles. At the bottom is the top-level makefile * from the command line, and on top of that, there are the included files or * .for loops, up to and including the current file. * * This data could be used to print stack traces on parse errors. As of * 2020-09-14, this is not done though. It seems quite simple to print the * tuples (fname:lineno:fromForLoop), from top to bottom. This simple idea is * made complicated by the fact that the .for loops also use this stack for * storing information. * * The lineno fields of the IFiles with fromForLoop == TRUE look confusing, * which is demonstrated by the test 'include-main.mk'. They seem sorted * backwards since they tell the number of completely parsed lines, which for * a .for loop is right after the terminating .endfor. To compensate for this * confusion, there is another field first_lineno pointing at the start of the * .for loop, 1-based for human consumption. * * To make the stack trace intuitive, the entry below the first .for loop must * be ignored completely since neither its lineno nor its first_lineno is * useful. Instead, the topmost of each chain of .for loop needs to be * printed twice, once with its first_lineno and once with its lineno. * * As of 2020-10-28, using the above rules, the stack trace for the .info line * in include-subsub.mk would be: * * includes[5]: include-subsub.mk:4 * (lineno, from an .include) * includes[4]: include-sub.mk:32 * (lineno, from a .for loop below an .include) * includes[4]: include-sub.mk:31 * (first_lineno, from a .for loop, lineno == 32) * includes[3]: include-sub.mk:30 * (first_lineno, from a .for loop, lineno == 33) * includes[2]: include-sub.mk:29 * (first_lineno, from a .for loop, lineno == 34) * includes[1]: include-sub.mk:35 * (not printed since it is below a .for loop) * includes[0]: include-main.mk:27 */ static Vector /* of IFile */ includes; static IFile * GetInclude(size_t i) { return Vector_Get(&includes, i); } /* The file that is currently being read. */ static IFile * CurFile(void) { return GetInclude(includes.len - 1); } /* include paths */ SearchPath *parseIncPath; /* dirs for "..." includes */ SearchPath *sysIncPath; /* dirs for <...> includes */ SearchPath *defSysIncPath; /* default for sysIncPath */ /* parser tables */ /* * The parseKeywords table is searched using binary search when deciding * if a target or source is special. The 'spec' field is the ParseSpecial * type of the keyword (SP_NOT if the keyword isn't special as a target) while * the 'op' field is the operator to apply to the list of targets if the * keyword is used as a source ("0" if the keyword isn't special as a source) */ static const struct { const char *name; /* Name of keyword */ ParseSpecial spec; /* Type when used as a target */ GNodeType op; /* Operator when used as a source */ } parseKeywords[] = { { ".BEGIN", SP_BEGIN, OP_NONE }, { ".DEFAULT", SP_DEFAULT, OP_NONE }, { ".DELETE_ON_ERROR", SP_DELETE_ON_ERROR, OP_NONE }, { ".END", SP_END, OP_NONE }, { ".ERROR", SP_ERROR, OP_NONE }, { ".EXEC", SP_ATTRIBUTE, OP_EXEC }, { ".IGNORE", SP_IGNORE, OP_IGNORE }, { ".INCLUDES", SP_INCLUDES, OP_NONE }, { ".INTERRUPT", SP_INTERRUPT, OP_NONE }, { ".INVISIBLE", SP_ATTRIBUTE, OP_INVISIBLE }, { ".JOIN", SP_ATTRIBUTE, OP_JOIN }, { ".LIBS", SP_LIBS, OP_NONE }, { ".MADE", SP_ATTRIBUTE, OP_MADE }, { ".MAIN", SP_MAIN, OP_NONE }, { ".MAKE", SP_ATTRIBUTE, OP_MAKE }, { ".MAKEFLAGS", SP_MFLAGS, OP_NONE }, { ".META", SP_META, OP_META }, { ".MFLAGS", SP_MFLAGS, OP_NONE }, { ".NOMETA", SP_NOMETA, OP_NOMETA }, { ".NOMETA_CMP", SP_NOMETA_CMP, OP_NOMETA_CMP }, { ".NOPATH", SP_NOPATH, OP_NOPATH }, { ".NOTMAIN", SP_ATTRIBUTE, OP_NOTMAIN }, { ".NOTPARALLEL", SP_NOTPARALLEL, OP_NONE }, { ".NO_PARALLEL", SP_NOTPARALLEL, OP_NONE }, { ".NULL", SP_NULL, OP_NONE }, { ".OBJDIR", SP_OBJDIR, OP_NONE }, { ".OPTIONAL", SP_ATTRIBUTE, OP_OPTIONAL }, { ".ORDER", SP_ORDER, OP_NONE }, { ".PARALLEL", SP_PARALLEL, OP_NONE }, { ".PATH", SP_PATH, OP_NONE }, { ".PHONY", SP_PHONY, OP_PHONY }, #ifdef POSIX { ".POSIX", SP_POSIX, OP_NONE }, #endif { ".PRECIOUS", SP_PRECIOUS, OP_PRECIOUS }, { ".RECURSIVE", SP_ATTRIBUTE, OP_MAKE }, { ".SHELL", SP_SHELL, OP_NONE }, { ".SILENT", SP_SILENT, OP_SILENT }, { ".SINGLESHELL", SP_SINGLESHELL, OP_NONE }, { ".STALE", SP_STALE, OP_NONE }, { ".SUFFIXES", SP_SUFFIXES, OP_NONE }, { ".USE", SP_ATTRIBUTE, OP_USE }, { ".USEBEFORE", SP_ATTRIBUTE, OP_USEBEFORE }, { ".WAIT", SP_WAIT, OP_NONE }, }; /* file loader */ struct loadedfile { /* XXX: What is the lifetime of this path? Who manages the memory? */ const char *path; /* name, for error reports */ char *buf; /* contents buffer */ size_t len; /* length of contents */ Boolean used; /* XXX: have we used the data yet */ }; /* XXX: What is the lifetime of the path? Who manages the memory? */ static struct loadedfile * loadedfile_create(const char *path, char *buf, size_t buflen) { struct loadedfile *lf; lf = bmake_malloc(sizeof *lf); lf->path = path == NULL ? "(stdin)" : path; lf->buf = buf; lf->len = buflen; lf->used = FALSE; return lf; } static void loadedfile_destroy(struct loadedfile *lf) { free(lf->buf); free(lf); } /* * readMore() operation for loadedfile, as needed by the weird and twisted * logic below. Once that's cleaned up, we can get rid of lf->used. */ static char * loadedfile_readMore(void *x, size_t *len) { struct loadedfile *lf = x; if (lf->used) return NULL; lf->used = TRUE; *len = lf->len; return lf->buf; } /* * Try to get the size of a file. */ static Boolean load_getsize(int fd, size_t *ret) { struct stat st; if (fstat(fd, &st) < 0) return FALSE; if (!S_ISREG(st.st_mode)) return FALSE; /* * st_size is an off_t, which is 64 bits signed; *ret is * size_t, which might be 32 bits unsigned or 64 bits * unsigned. Rather than being elaborate, just punt on * files that are more than 1 GiB. We should never * see a makefile that size in practice. * * While we're at it reject negative sizes too, just in case. */ if (st.st_size < 0 || st.st_size > 0x3fffffff) return FALSE; *ret = (size_t)st.st_size; return TRUE; } /* * Read in a file. * * Until the path search logic can be moved under here instead of * being in the caller in another source file, we need to have the fd * passed in already open. Bleh. * * If the path is NULL, use stdin. */ static struct loadedfile * loadfile(const char *path, int fd) { ssize_t n; Buffer buf; size_t filesize; if (path == NULL) { assert(fd == -1); fd = STDIN_FILENO; } if (load_getsize(fd, &filesize)) { /* * Avoid resizing the buffer later for no reason. * * At the same time leave space for adding a final '\n', * just in case it is missing in the file. */ filesize++; } else filesize = 1024; Buf_InitSize(&buf, filesize); for (;;) { assert(buf.len <= buf.cap); if (buf.len == buf.cap) { if (buf.cap > 0x1fffffff) { errno = EFBIG; Error("%s: file too large", path); exit(2); /* Not 1 so -q can distinguish error */ } Buf_Expand(&buf); } assert(buf.len < buf.cap); n = read(fd, buf.data + buf.len, buf.cap - buf.len); if (n < 0) { Error("%s: read error: %s", path, strerror(errno)); exit(2); /* Not 1 so -q can distinguish error */ } if (n == 0) break; buf.len += (size_t)n; } assert(buf.len <= buf.cap); if (!Buf_EndsWith(&buf, '\n')) Buf_AddByte(&buf, '\n'); if (path != NULL) close(fd); { struct loadedfile *lf = loadedfile_create(path, buf.data, buf.len); Buf_Destroy(&buf, FALSE); return lf; } } /* old code */ /* Check if the current character is escaped on the current line. */ static Boolean ParseIsEscaped(const char *line, const char *c) { Boolean active = FALSE; for (;;) { if (line == c) return active; if (*--c != '\\') return active; active = !active; } } /* * Add the filename and lineno to the GNode so that we remember where it * was first defined. */ static void ParseMark(GNode *gn) { IFile *curFile = CurFile(); gn->fname = curFile->fname; gn->lineno = curFile->lineno; } /* * Look in the table of keywords for one matching the given string. * Return the index of the keyword, or -1 if it isn't there. */ static int ParseFindKeyword(const char *str) { int start = 0; int end = sizeof parseKeywords / sizeof parseKeywords[0] - 1; do { int curr = start + (end - start) / 2; int diff = strcmp(str, parseKeywords[curr].name); if (diff == 0) return curr; if (diff < 0) end = curr - 1; else start = curr + 1; } while (start <= end); return -1; } static void PrintLocation(FILE *f, const char *fname, size_t lineno) { char dirbuf[MAXPATHLEN + 1]; FStr dir, base; if (*fname == '/' || strcmp(fname, "(stdin)") == 0) { (void)fprintf(f, "\"%s\" line %u: ", fname, (unsigned)lineno); return; } /* Find out which makefile is the culprit. * We try ${.PARSEDIR} and apply realpath(3) if not absolute. */ dir = Var_Value(".PARSEDIR", VAR_GLOBAL); if (dir.str == NULL) dir.str = "."; if (dir.str[0] != '/') dir.str = realpath(dir.str, dirbuf); base = Var_Value(".PARSEFILE", VAR_GLOBAL); if (base.str == NULL) base.str = str_basename(fname); (void)fprintf(f, "\"%s/%s\" line %u: ", dir.str, base.str, (unsigned)lineno); FStr_Done(&base); FStr_Done(&dir); } static void ParseVErrorInternal(FILE *f, const char *fname, size_t lineno, ParseErrorLevel type, const char *fmt, va_list ap) { static Boolean fatal_warning_error_printed = FALSE; (void)fprintf(f, "%s: ", progname); if (fname != NULL) PrintLocation(f, fname, lineno); if (type == PARSE_WARNING) (void)fprintf(f, "warning: "); (void)vfprintf(f, fmt, ap); (void)fprintf(f, "\n"); (void)fflush(f); if (type == PARSE_INFO) return; if (type == PARSE_FATAL || opts.parseWarnFatal) fatals++; if (opts.parseWarnFatal && !fatal_warning_error_printed) { Error("parsing warnings being treated as errors"); fatal_warning_error_printed = TRUE; } } static void ParseErrorInternal(const char *fname, size_t lineno, ParseErrorLevel type, const char *fmt, ...) { va_list ap; (void)fflush(stdout); va_start(ap, fmt); ParseVErrorInternal(stderr, fname, lineno, type, fmt, ap); va_end(ap); if (opts.debug_file != stderr && opts.debug_file != stdout) { va_start(ap, fmt); ParseVErrorInternal(opts.debug_file, fname, lineno, type, fmt, ap); va_end(ap); } } /* * Print a parse error message, including location information. * * If the level is PARSE_FATAL, continue parsing until the end of the * current top-level makefile, then exit (see Parse_File). * * Fmt is given without a trailing newline. */ void Parse_Error(ParseErrorLevel type, const char *fmt, ...) { va_list ap; const char *fname; size_t lineno; if (includes.len == 0) { fname = NULL; lineno = 0; } else { IFile *curFile = CurFile(); fname = curFile->fname; lineno = (size_t)curFile->lineno; } va_start(ap, fmt); (void)fflush(stdout); ParseVErrorInternal(stderr, fname, lineno, type, fmt, ap); va_end(ap); if (opts.debug_file != stderr && opts.debug_file != stdout) { va_start(ap, fmt); ParseVErrorInternal(opts.debug_file, fname, lineno, type, fmt, ap); va_end(ap); } } /* * Parse and handle a .info, .warning or .error directive. * For an .error directive, immediately exit. */ static void ParseMessage(ParseErrorLevel level, const char *levelName, const char *umsg) { char *xmsg; if (umsg[0] == '\0') { Parse_Error(PARSE_FATAL, "Missing argument for \".%s\"", levelName); return; } (void)Var_Subst(umsg, VAR_CMDLINE, VARE_WANTRES, &xmsg); /* TODO: handle errors */ Parse_Error(level, "%s", xmsg); free(xmsg); if (level == PARSE_FATAL) { PrintOnError(NULL, NULL); exit(1); } } /* * Add the child to the parent's children. * * Additionally, add the parent to the child's parents, but only if the * target is not special. An example for such a special target is .END, * which does not need to be informed once the child target has been made. */ static void LinkSource(GNode *pgn, GNode *cgn, Boolean isSpecial) { if ((pgn->type & OP_DOUBLEDEP) && !Lst_IsEmpty(&pgn->cohorts)) pgn = pgn->cohorts.last->datum; Lst_Append(&pgn->children, cgn); pgn->unmade++; /* Special targets like .END don't need any children. */ if (!isSpecial) Lst_Append(&cgn->parents, pgn); if (DEBUG(PARSE)) { debug_printf("# %s: added child %s - %s\n", __func__, pgn->name, cgn->name); Targ_PrintNode(pgn, 0); Targ_PrintNode(cgn, 0); } } /* Add the node to each target from the current dependency group. */ static void LinkToTargets(GNode *gn, Boolean isSpecial) { GNodeListNode *ln; for (ln = targets->first; ln != NULL; ln = ln->next) LinkSource(ln->datum, gn, isSpecial); } static Boolean TryApplyDependencyOperator(GNode *gn, GNodeType op) { /* * If the node occurred on the left-hand side of a dependency and the * operator also defines a dependency, they must match. */ if ((op & OP_OPMASK) && (gn->type & OP_OPMASK) && ((op & OP_OPMASK) != (gn->type & OP_OPMASK))) { Parse_Error(PARSE_FATAL, "Inconsistent operator for %s", gn->name); return FALSE; } if (op == OP_DOUBLEDEP && (gn->type & OP_OPMASK) == OP_DOUBLEDEP) { /* * If the node was of the left-hand side of a '::' operator, * we need to create a new instance of it for the children * and commands on this dependency line since each of these * dependency groups has its own attributes and commands, * separate from the others. * * The new instance is placed on the 'cohorts' list of the * initial one (note the initial one is not on its own * cohorts list) and the new instance is linked to all * parents of the initial instance. */ GNode *cohort; /* * Propagate copied bits to the initial node. They'll be * propagated back to the rest of the cohorts later. */ gn->type |= op & ~OP_OPMASK; cohort = Targ_NewInternalNode(gn->name); if (doing_depend) ParseMark(cohort); /* * Make the cohort invisible as well to avoid duplicating it * into other variables. True, parents of this target won't * tend to do anything with their local variables, but better * safe than sorry. * * (I think this is pointless now, since the relevant list * traversals will no longer see this node anyway. -mycroft) */ cohort->type = op | OP_INVISIBLE; Lst_Append(&gn->cohorts, cohort); cohort->centurion = gn; gn->unmade_cohorts++; snprintf(cohort->cohort_num, sizeof cohort->cohort_num, "#%d", (unsigned int)gn->unmade_cohorts % 1000000); } else { /* * We don't want to nuke any previous flags (whatever they * were) so we just OR the new operator into the old. */ gn->type |= op; } return TRUE; } static void ApplyDependencyOperator(GNodeType op) { GNodeListNode *ln; for (ln = targets->first; ln != NULL; ln = ln->next) if (!TryApplyDependencyOperator(ln->datum, op)) break; } /* * We add a .WAIT node in the dependency list. After any dynamic dependencies * (and filename globbing) have happened, it is given a dependency on each * previous child, back until the previous .WAIT node. The next child won't * be scheduled until the .WAIT node is built. * * We give each .WAIT node a unique name (mainly for diagnostics). */ static void ParseDependencySourceWait(Boolean isSpecial) { static int wait_number = 0; char wait_src[16]; GNode *gn; snprintf(wait_src, sizeof wait_src, ".WAIT_%u", ++wait_number); gn = Targ_NewInternalNode(wait_src); if (doing_depend) ParseMark(gn); gn->type = OP_WAIT | OP_PHONY | OP_DEPENDS | OP_NOTMAIN; LinkToTargets(gn, isSpecial); } static Boolean ParseDependencySourceKeyword(const char *src, ParseSpecial specType) { int keywd; GNodeType op; if (*src != '.' || !ch_isupper(src[1])) return FALSE; keywd = ParseFindKeyword(src); if (keywd == -1) return FALSE; op = parseKeywords[keywd].op; if (op != OP_NONE) { ApplyDependencyOperator(op); return TRUE; } if (parseKeywords[keywd].spec == SP_WAIT) { ParseDependencySourceWait(specType != SP_NOT); return TRUE; } return FALSE; } static void ParseDependencySourceMain(const char *src) { /* * In a line like ".MAIN: source1 source2", it means we need to add * the sources of said target to the list of things to create. * * Note that this will only be invoked if the user didn't specify a * target on the command line and the .MAIN occurs for the first time. * * See ParseDoDependencyTargetSpecial, branch SP_MAIN. * See unit-tests/cond-func-make-main.mk. */ Lst_Append(&opts.create, bmake_strdup(src)); /* * Add the name to the .TARGETS variable as well, so the user can * employ that, if desired. */ Var_Append(".TARGETS", src, VAR_GLOBAL); } static void ParseDependencySourceOrder(const char *src) { GNode *gn; /* * Create proper predecessor/successor links between the previous * source and the current one. */ gn = Targ_GetNode(src); if (doing_depend) ParseMark(gn); if (order_pred != NULL) { Lst_Append(&order_pred->order_succ, gn); Lst_Append(&gn->order_pred, order_pred); if (DEBUG(PARSE)) { debug_printf("# %s: added Order dependency %s - %s\n", __func__, order_pred->name, gn->name); Targ_PrintNode(order_pred, 0); Targ_PrintNode(gn, 0); } } /* * The current source now becomes the predecessor for the next one. */ order_pred = gn; } static void ParseDependencySourceOther(const char *src, GNodeType tOp, ParseSpecial specType) { GNode *gn; /* * If the source is not an attribute, we need to find/create * a node for it. After that we can apply any operator to it * from a special target or link it to its parents, as * appropriate. * * In the case of a source that was the object of a :: operator, * the attribute is applied to all of its instances (as kept in * the 'cohorts' list of the node) or all the cohorts are linked * to all the targets. */ /* Find/create the 'src' node and attach to all targets */ gn = Targ_GetNode(src); if (doing_depend) ParseMark(gn); if (tOp != OP_NONE) gn->type |= tOp; else LinkToTargets(gn, specType != SP_NOT); } /* * Given the name of a source in a dependency line, figure out if it is an * attribute (such as .SILENT) and apply it to the targets if it is. Else * decide if there is some attribute which should be applied *to* the source * because of some special target (such as .PHONY) and apply it if so. * Otherwise, make the source a child of the targets in the list 'targets'. * * Input: * tOp operator (if any) from special targets * src name of the source to handle */ static void ParseDependencySource(GNodeType tOp, const char *src, ParseSpecial specType) { if (ParseDependencySourceKeyword(src, specType)) return; if (specType == SP_MAIN) ParseDependencySourceMain(src); else if (specType == SP_ORDER) ParseDependencySourceOrder(src); else ParseDependencySourceOther(src, tOp, specType); } /* * If we have yet to decide on a main target to make, in the absence of any * user input, we want the first target on the first dependency line that is * actually a real target (i.e. isn't a .USE or .EXEC rule) to be made. */ static void FindMainTarget(void) { GNodeListNode *ln; if (mainNode != NULL) return; for (ln = targets->first; ln != NULL; ln = ln->next) { GNode *gn = ln->datum; if (!(gn->type & OP_NOTARGET)) { DEBUG1(MAKE, "Setting main node to \"%s\"\n", gn->name); mainNode = gn; Targ_SetMain(gn); return; } } } /* * We got to the end of the line while we were still looking at targets. * * Ending a dependency line without an operator is a Bozo no-no. As a * heuristic, this is also often triggered by undetected conflicts from * cvs/rcs merges. */ static void ParseErrorNoDependency(const char *lstart) { if ((strncmp(lstart, "<<<<<<", 6) == 0) || (strncmp(lstart, "======", 6) == 0) || (strncmp(lstart, ">>>>>>", 6) == 0)) Parse_Error(PARSE_FATAL, "Makefile appears to contain unresolved cvs/rcs/??? merge conflicts"); else if (lstart[0] == '.') { const char *dirstart = lstart + 1; const char *dirend; cpp_skip_whitespace(&dirstart); dirend = dirstart; while (ch_isalnum(*dirend) || *dirend == '-') dirend++; Parse_Error(PARSE_FATAL, "Unknown directive \"%.*s\"", (int)(dirend - dirstart), dirstart); } else Parse_Error(PARSE_FATAL, "Need an operator"); } static void ParseDependencyTargetWord(const char **pp, const char *lstart) { const char *cp = *pp; while (*cp != '\0') { if ((ch_isspace(*cp) || *cp == '!' || *cp == ':' || *cp == '(') && !ParseIsEscaped(lstart, cp)) break; if (*cp == '$') { /* * Must be a dynamic source (would have been expanded * otherwise), so call the Var module to parse the * puppy so we can safely advance beyond it. * * There should be no errors in this, as they would * have been discovered in the initial Var_Subst and * we wouldn't be here. */ const char *nested_p = cp; FStr nested_val; (void)Var_Parse(&nested_p, VAR_CMDLINE, VARE_NONE, &nested_val); /* TODO: handle errors */ FStr_Done(&nested_val); cp += nested_p - cp; } else cp++; } *pp = cp; } /* Handle special targets like .PATH, .DEFAULT, .BEGIN, .ORDER. */ static void ParseDoDependencyTargetSpecial(ParseSpecial *inout_specType, const char *line, /* XXX: bad name */ SearchPathList **inout_paths) { switch (*inout_specType) { case SP_PATH: if (*inout_paths == NULL) *inout_paths = Lst_New(); Lst_Append(*inout_paths, &dirSearchPath); break; case SP_MAIN: /* * Allow targets from the command line to override the * .MAIN node. */ if (!Lst_IsEmpty(&opts.create)) *inout_specType = SP_NOT; break; case SP_BEGIN: case SP_END: case SP_STALE: case SP_ERROR: case SP_INTERRUPT: { GNode *gn = Targ_GetNode(line); if (doing_depend) ParseMark(gn); gn->type |= OP_NOTMAIN | OP_SPECIAL; Lst_Append(targets, gn); break; } case SP_DEFAULT: { /* * Need to create a node to hang commands on, but we don't * want it in the graph, nor do we want it to be the Main * Target. We claim the node is a transformation rule to make * life easier later, when we'll use Make_HandleUse to * actually apply the .DEFAULT commands. */ GNode *gn = GNode_New(".DEFAULT"); gn->type |= OP_NOTMAIN | OP_TRANSFORM; Lst_Append(targets, gn); defaultNode = gn; break; } case SP_DELETE_ON_ERROR: deleteOnError = TRUE; break; case SP_NOTPARALLEL: opts.maxJobs = 1; break; case SP_SINGLESHELL: opts.compatMake = TRUE; break; case SP_ORDER: order_pred = NULL; break; default: break; } } /* * .PATH has to be handled specially. * Call on the suffix module to give us a path to modify. */ static Boolean ParseDoDependencyTargetPath(const char *line, /* XXX: bad name */ SearchPathList **inout_paths) { SearchPath *path; path = Suff_GetPath(&line[5]); if (path == NULL) { Parse_Error(PARSE_FATAL, "Suffix '%s' not defined (yet)", &line[5]); return FALSE; } if (*inout_paths == NULL) *inout_paths = Lst_New(); Lst_Append(*inout_paths, path); return TRUE; } /* * See if it's a special target and if so set specType to match it. */ static Boolean ParseDoDependencyTarget(const char *line, /* XXX: bad name */ ParseSpecial *inout_specType, GNodeType *out_tOp, SearchPathList **inout_paths) { int keywd; if (!(line[0] == '.' && ch_isupper(line[1]))) return TRUE; /* * See if the target is a special target that must have it * or its sources handled specially. */ keywd = ParseFindKeyword(line); if (keywd != -1) { if (*inout_specType == SP_PATH && parseKeywords[keywd].spec != SP_PATH) { Parse_Error(PARSE_FATAL, "Mismatched special targets"); return FALSE; } *inout_specType = parseKeywords[keywd].spec; *out_tOp = parseKeywords[keywd].op; ParseDoDependencyTargetSpecial(inout_specType, line, inout_paths); } else if (strncmp(line, ".PATH", 5) == 0) { *inout_specType = SP_PATH; if (!ParseDoDependencyTargetPath(line, inout_paths)) return FALSE; } return TRUE; } static void ParseDoDependencyTargetMundane(char *line, /* XXX: bad name */ StringList *curTargs) { if (Dir_HasWildcards(line)) { /* * Targets are to be sought only in the current directory, * so create an empty path for the thing. Note we need to * use Dir_Destroy in the destruction of the path as the * Dir module could have added a directory to the path... */ SearchPath *emptyPath = SearchPath_New(); Dir_Expand(line, emptyPath, curTargs); SearchPath_Free(emptyPath); } else { /* * No wildcards, but we want to avoid code duplication, * so create a list with the word on it. */ Lst_Append(curTargs, line); } /* Apply the targets. */ while (!Lst_IsEmpty(curTargs)) { char *targName = Lst_Dequeue(curTargs); GNode *gn = Suff_IsTransform(targName) ? Suff_AddTransform(targName) : Targ_GetNode(targName); if (doing_depend) ParseMark(gn); Lst_Append(targets, gn); } } static void ParseDoDependencyTargetExtraWarn(char **pp, const char *lstart) { Boolean warning = FALSE; char *cp = *pp; while (*cp != '\0') { if (!ParseIsEscaped(lstart, cp) && (*cp == '!' || *cp == ':')) break; if (ParseIsEscaped(lstart, cp) || (*cp != ' ' && *cp != '\t')) warning = TRUE; cp++; } if (warning) Parse_Error(PARSE_WARNING, "Extra target ignored"); *pp = cp; } static void ParseDoDependencyCheckSpec(ParseSpecial specType) { switch (specType) { default: Parse_Error(PARSE_WARNING, "Special and mundane targets don't mix. " "Mundane ones ignored"); break; case SP_DEFAULT: case SP_STALE: case SP_BEGIN: case SP_END: case SP_ERROR: case SP_INTERRUPT: /* * These create nodes on which to hang commands, so targets * shouldn't be empty. */ case SP_NOT: /* Nothing special here -- targets can be empty if it wants. */ break; } } static Boolean ParseDoDependencyParseOp(char **pp, const char *lstart, GNodeType *out_op) { const char *cp = *pp; if (*cp == '!') { *out_op = OP_FORCE; (*pp)++; return TRUE; } if (*cp == ':') { if (cp[1] == ':') { *out_op = OP_DOUBLEDEP; (*pp) += 2; } else { *out_op = OP_DEPENDS; (*pp)++; } return TRUE; } { const char *msg = lstart[0] == '.' ? "Unknown directive" : "Missing dependency operator"; Parse_Error(PARSE_FATAL, "%s", msg); return FALSE; } } static void ClearPaths(SearchPathList *paths) { if (paths != NULL) { SearchPathListNode *ln; for (ln = paths->first; ln != NULL; ln = ln->next) SearchPath_Clear(ln->datum); } Dir_SetPATH(); } static void ParseDoDependencySourcesEmpty(ParseSpecial specType, SearchPathList *paths) { switch (specType) { case SP_SUFFIXES: Suff_ClearSuffixes(); break; case SP_PRECIOUS: allPrecious = TRUE; break; case SP_IGNORE: opts.ignoreErrors = TRUE; break; case SP_SILENT: opts.beSilent = TRUE; break; case SP_PATH: ClearPaths(paths); break; #ifdef POSIX case SP_POSIX: Var_Set("%POSIX", "1003.2", VAR_GLOBAL); break; #endif default: break; } } static void AddToPaths(const char *dir, SearchPathList *paths) { if (paths != NULL) { SearchPathListNode *ln; for (ln = paths->first; ln != NULL; ln = ln->next) (void)Dir_AddDir(ln->datum, dir); } } /* * If the target was one that doesn't take files as its sources * but takes something like suffixes, we take each * space-separated word on the line as a something and deal * with it accordingly. * * If the target was .SUFFIXES, we take each source as a * suffix and add it to the list of suffixes maintained by the * Suff module. * * If the target was a .PATH, we add the source as a directory * to search on the search path. * * If it was .INCLUDES, the source is taken to be the suffix of * files which will be #included and whose search path should * be present in the .INCLUDES variable. * * If it was .LIBS, the source is taken to be the suffix of * files which are considered libraries and whose search path * should be present in the .LIBS variable. * * If it was .NULL, the source is the suffix to use when a file * has no valid suffix. * * If it was .OBJDIR, the source is a new definition for .OBJDIR, * and will cause make to do a new chdir to that path. */ static void ParseDoDependencySourceSpecial(ParseSpecial specType, char *word, SearchPathList *paths) { switch (specType) { case SP_SUFFIXES: Suff_AddSuffix(word, &mainNode); break; case SP_PATH: AddToPaths(word, paths); break; case SP_INCLUDES: Suff_AddInclude(word); break; case SP_LIBS: Suff_AddLib(word); break; case SP_NULL: Suff_SetNull(word); break; case SP_OBJDIR: Main_SetObjdir(FALSE, "%s", word); break; default: break; } } static Boolean ParseDoDependencyTargets(char **inout_cp, char **inout_line, const char *lstart, ParseSpecial *inout_specType, GNodeType *inout_tOp, SearchPathList **inout_paths, StringList *curTargs) { char *cp; char *tgt = *inout_line; char savec; const char *p; for (;;) { /* * Here LINE points to the beginning of the next word, and * LSTART points to the actual beginning of the line. */ /* Find the end of the next word. */ cp = tgt; p = cp; ParseDependencyTargetWord(&p, lstart); cp += p - cp; /* * If the word is followed by a left parenthesis, it's the * name of an object file inside an archive (ar file). */ if (!ParseIsEscaped(lstart, cp) && *cp == '(') { /* * Archives must be handled specially to make sure the * OP_ARCHV flag is set in their 'type' field, for one * thing, and because things like "archive(file1.o * file2.o file3.o)" are permissible. * * Arch_ParseArchive will set 'line' to be the first * non-blank after the archive-spec. It creates/finds * nodes for the members and places them on the given * list, returning TRUE if all went well and FALSE if * there was an error in the specification. On error, * line should remain untouched. */ if (!Arch_ParseArchive(&tgt, targets, VAR_CMDLINE)) { Parse_Error(PARSE_FATAL, "Error in archive specification: \"%s\"", tgt); return FALSE; } cp = tgt; continue; } if (*cp == '\0') { ParseErrorNoDependency(lstart); return FALSE; } /* Insert a null terminator. */ savec = *cp; *cp = '\0'; if (!ParseDoDependencyTarget(tgt, inout_specType, inout_tOp, inout_paths)) return FALSE; /* * Have word in line. Get or create its node and stick it at * the end of the targets list */ if (*inout_specType == SP_NOT && *tgt != '\0') ParseDoDependencyTargetMundane(tgt, curTargs); else if (*inout_specType == SP_PATH && *tgt != '.' && *tgt != '\0') Parse_Error(PARSE_WARNING, "Extra target (%s) ignored", tgt); /* Don't need the inserted null terminator any more. */ *cp = savec; /* * If it is a special type and not .PATH, it's the only target * we allow on this line. */ if (*inout_specType != SP_NOT && *inout_specType != SP_PATH) ParseDoDependencyTargetExtraWarn(&cp, lstart); else pp_skip_whitespace(&cp); tgt = cp; if (*tgt == '\0') break; if ((*tgt == '!' || *tgt == ':') && !ParseIsEscaped(lstart, tgt)) break; } *inout_cp = cp; *inout_line = tgt; return TRUE; } static void ParseDoDependencySourcesSpecial(char *start, char *end, ParseSpecial specType, SearchPathList *paths) { char savec; while (*start != '\0') { while (*end != '\0' && !ch_isspace(*end)) end++; savec = *end; *end = '\0'; ParseDoDependencySourceSpecial(specType, start, paths); *end = savec; if (savec != '\0') end++; pp_skip_whitespace(&end); start = end; } } static Boolean ParseDoDependencySourcesMundane(char *start, char *end, ParseSpecial specType, GNodeType tOp) { while (*start != '\0') { /* * The targets take real sources, so we must beware of archive * specifications (i.e. things with left parentheses in them) * and handle them accordingly. */ for (; *end != '\0' && !ch_isspace(*end); end++) { if (*end == '(' && end > start && end[-1] != '$') { /* * Only stop for a left parenthesis if it * isn't at the start of a word (that'll be * for variable changes later) and isn't * preceded by a dollar sign (a dynamic * source). */ break; } } if (*end == '(') { GNodeList sources = LST_INIT; if (!Arch_ParseArchive(&start, &sources, VAR_CMDLINE)) { Parse_Error(PARSE_FATAL, "Error in source archive spec \"%s\"", start); return FALSE; } while (!Lst_IsEmpty(&sources)) { GNode *gn = Lst_Dequeue(&sources); ParseDependencySource(tOp, gn->name, specType); } Lst_Done(&sources); end = start; } else { if (*end != '\0') { *end = '\0'; end++; } ParseDependencySource(tOp, start, specType); } pp_skip_whitespace(&end); start = end; } return TRUE; } /* * Parse a dependency line consisting of targets, followed by a dependency * operator, optionally followed by sources. * * The nodes of the sources are linked as children to the nodes of the * targets. Nodes are created as necessary. * * The operator is applied to each node in the global 'targets' list, * which is where the nodes found for the targets are kept, by means of * the ParseDoOp function. * * The sources are parsed in much the same way as the targets, except * that they are expanded using the wildcarding scheme of the C-Shell, * and a target is created for each expanded word. Each of the resulting * nodes is then linked to each of the targets as one of its children. * * Certain targets and sources such as .PHONY or .PRECIOUS are handled * specially. These are the ones detailed by the specType variable. * * The storing of transformation rules such as '.c.o' is also taken care of * here. A target is recognized as a transformation rule by calling * Suff_IsTransform. If it is a transformation rule, its node is gotten * from the suffix module via Suff_AddTransform rather than the standard * Targ_FindNode in the target module. * * Upon return, the value of the line is unspecified. */ static void ParseDoDependency(char *line) { char *cp; /* our current position */ GNodeType op; /* the operator on the line */ SearchPathList *paths; /* search paths to alter when parsing * a list of .PATH targets */ GNodeType tOp; /* operator from special target */ /* target names to be found and added to the targets list */ StringList curTargs = LST_INIT; char *lstart = line; /* * specType contains the SPECial TYPE of the current target. It is * SP_NOT if the target is unspecial. If it *is* special, however, the * children are linked as children of the parent but not vice versa. */ ParseSpecial specType = SP_NOT; DEBUG1(PARSE, "ParseDoDependency(%s)\n", line); tOp = OP_NONE; paths = NULL; /* * First, grind through the targets. */ /* XXX: don't use line as an iterator variable */ if (!ParseDoDependencyTargets(&cp, &line, lstart, &specType, &tOp, &paths, &curTargs)) goto out; /* * Don't need the list of target names anymore. * The targets themselves are now in the global variable 'targets'. */ Lst_Done(&curTargs); Lst_Init(&curTargs); if (!Lst_IsEmpty(targets)) ParseDoDependencyCheckSpec(specType); /* * Have now parsed all the target names. Must parse the operator next. */ if (!ParseDoDependencyParseOp(&cp, lstart, &op)) goto out; /* * Apply the operator to the target. This is how we remember which * operator a target was defined with. It fails if the operator * used isn't consistent across all references. */ ApplyDependencyOperator(op); /* * Onward to the sources. * * LINE will now point to the first source word, if any, or the * end of the string if not. */ pp_skip_whitespace(&cp); line = cp; /* XXX: 'line' is an inappropriate name */ /* * Several special targets take different actions if present with no * sources: * a .SUFFIXES line with no sources clears out all old suffixes * a .PRECIOUS line makes all targets precious * a .IGNORE line ignores errors for all targets * a .SILENT line creates silence when making all targets * a .PATH removes all directories from the search path(s). */ if (line[0] == '\0') { ParseDoDependencySourcesEmpty(specType, paths); } else if (specType == SP_MFLAGS) { /* * Call on functions in main.c to deal with these arguments and * set the initial character to a null-character so the loop to * get sources won't get anything */ Main_ParseArgLine(line); *line = '\0'; } else if (specType == SP_SHELL) { if (!Job_ParseShell(line)) { Parse_Error(PARSE_FATAL, "improper shell specification"); goto out; } *line = '\0'; } else if (specType == SP_NOTPARALLEL || specType == SP_SINGLESHELL || specType == SP_DELETE_ON_ERROR) { *line = '\0'; } /* Now go for the sources. */ if (specType == SP_SUFFIXES || specType == SP_PATH || specType == SP_INCLUDES || specType == SP_LIBS || specType == SP_NULL || specType == SP_OBJDIR) { ParseDoDependencySourcesSpecial(line, cp, specType, paths); if (paths != NULL) { Lst_Free(paths); paths = NULL; } if (specType == SP_PATH) Dir_SetPATH(); } else { assert(paths == NULL); if (!ParseDoDependencySourcesMundane(line, cp, specType, tOp)) goto out; } FindMainTarget(); out: if (paths != NULL) Lst_Free(paths); Lst_Done(&curTargs); } typedef struct VarAssignParsed { const char *nameStart; /* unexpanded */ const char *nameEnd; /* before operator adjustment */ const char *eq; /* the '=' of the assignment operator */ } VarAssignParsed; /* * Determine the assignment operator and adjust the end of the variable * name accordingly. */ static void AdjustVarassignOp(const VarAssignParsed *pvar, const char *value, VarAssign *out_var) { const char *op = pvar->eq; const char *const name = pvar->nameStart; VarAssignOp type; if (op > name && op[-1] == '+') { type = VAR_APPEND; op--; } else if (op > name && op[-1] == '?') { op--; type = VAR_DEFAULT; } else if (op > name && op[-1] == ':') { op--; type = VAR_SUBST; } else if (op > name && op[-1] == '!') { op--; type = VAR_SHELL; } else { type = VAR_NORMAL; #ifdef SUNSHCMD while (op > name && ch_isspace(op[-1])) op--; if (op >= name + 3 && op[-3] == ':' && op[-2] == 's' && op[-1] == 'h') { type = VAR_SHELL; op -= 3; } #endif } { const char *nameEnd = pvar->nameEnd < op ? pvar->nameEnd : op; out_var->varname = bmake_strsedup(pvar->nameStart, nameEnd); out_var->op = type; out_var->value = value; } } /* * Parse a variable assignment, consisting of a single-word variable name, * optional whitespace, an assignment operator, optional whitespace and the * variable value. * * Note: There is a lexical ambiguity with assignment modifier characters * in variable names. This routine interprets the character before the = * as a modifier. Therefore, an assignment like * C++=/usr/bin/CC * is interpreted as "C+ +=" instead of "C++ =". * * Used for both lines in a file and command line arguments. */ Boolean Parse_IsVar(const char *p, VarAssign *out_var) { VarAssignParsed pvar; const char *firstSpace = NULL; int level = 0; cpp_skip_hspace(&p); /* Skip to variable name */ /* * During parsing, the '+' of the '+=' operator is initially parsed * as part of the variable name. It is later corrected, as is the * ':sh' modifier. Of these two (nameEnd and op), the earlier one * determines the actual end of the variable name. */ pvar.nameStart = p; #ifdef CLEANUP pvar.nameEnd = NULL; pvar.eq = NULL; #endif /* * Scan for one of the assignment operators outside a variable * expansion. */ while (*p != '\0') { char ch = *p++; if (ch == '(' || ch == '{') { level++; continue; } if (ch == ')' || ch == '}') { level--; continue; } if (level != 0) continue; if (ch == ' ' || ch == '\t') if (firstSpace == NULL) firstSpace = p - 1; while (ch == ' ' || ch == '\t') ch = *p++; #ifdef SUNSHCMD if (ch == ':' && p[0] == 's' && p[1] == 'h') { p += 2; continue; } #endif if (ch == '=') { pvar.eq = p - 1; pvar.nameEnd = firstSpace != NULL ? firstSpace : p - 1; cpp_skip_whitespace(&p); AdjustVarassignOp(&pvar, p, out_var); return TRUE; } if (*p == '=' && (ch == '+' || ch == ':' || ch == '?' || ch == '!')) { pvar.eq = p; pvar.nameEnd = firstSpace != NULL ? firstSpace : p; p++; cpp_skip_whitespace(&p); AdjustVarassignOp(&pvar, p, out_var); return TRUE; } if (firstSpace != NULL) return FALSE; } return FALSE; } /* * Check for syntax errors such as unclosed expressions or unknown modifiers. */ static void VarCheckSyntax(VarAssignOp type, const char *uvalue, GNode *ctxt) { if (opts.strict) { if (type != VAR_SUBST && strchr(uvalue, '$') != NULL) { char *expandedValue; (void)Var_Subst(uvalue, ctxt, VARE_NONE, &expandedValue); /* TODO: handle errors */ free(expandedValue); } } } static void VarAssign_EvalSubst(const char *name, const char *uvalue, GNode *ctxt, FStr *out_avalue) { const char *avalue; char *evalue; /* * make sure that we set the variable the first time to nothing * so that it gets substituted! */ if (!Var_Exists(name, ctxt)) Var_Set(name, "", ctxt); (void)Var_Subst(uvalue, ctxt, VARE_WANTRES | VARE_KEEP_DOLLAR | VARE_KEEP_UNDEF, &evalue); /* TODO: handle errors */ avalue = evalue; Var_Set(name, avalue, ctxt); *out_avalue = (FStr){ avalue, evalue }; } static void VarAssign_EvalShell(const char *name, const char *uvalue, GNode *ctxt, FStr *out_avalue) { FStr cmd; const char *errfmt; char *cmdOut; cmd = FStr_InitRefer(uvalue); if (strchr(cmd.str, '$') != NULL) { char *expanded; (void)Var_Subst(cmd.str, VAR_CMDLINE, VARE_WANTRES | VARE_UNDEFERR, &expanded); /* TODO: handle errors */ cmd = FStr_InitOwn(expanded); } cmdOut = Cmd_Exec(cmd.str, &errfmt); Var_Set(name, cmdOut, ctxt); *out_avalue = FStr_InitOwn(cmdOut); if (errfmt != NULL) Parse_Error(PARSE_WARNING, errfmt, cmd.str); FStr_Done(&cmd); } /* * Perform a variable assignment. * * The actual value of the variable is returned in *out_avalue and * *out_avalue_freeIt. Especially for VAR_SUBST and VAR_SHELL this can differ * from the literal value. * * Return whether the assignment was actually done. The assignment is only * skipped if the operator is '?=' and the variable already exists. */ static Boolean VarAssign_Eval(const char *name, VarAssignOp op, const char *uvalue, GNode *ctxt, FStr *out_TRUE_avalue) { FStr avalue = FStr_InitRefer(uvalue); if (op == VAR_APPEND) Var_Append(name, uvalue, ctxt); else if (op == VAR_SUBST) VarAssign_EvalSubst(name, uvalue, ctxt, &avalue); else if (op == VAR_SHELL) VarAssign_EvalShell(name, uvalue, ctxt, &avalue); else { if (op == VAR_DEFAULT && Var_Exists(name, ctxt)) return FALSE; /* Normal assignment -- just do it. */ Var_Set(name, uvalue, ctxt); } *out_TRUE_avalue = avalue; return TRUE; } static void VarAssignSpecial(const char *name, const char *avalue) { if (strcmp(name, MAKEOVERRIDES) == 0) Main_ExportMAKEFLAGS(FALSE); /* re-export MAKEFLAGS */ else if (strcmp(name, ".CURDIR") == 0) { /* * Someone is being (too?) clever... * Let's pretend they know what they are doing and * re-initialize the 'cur' CachedDir. */ Dir_InitCur(avalue); Dir_SetPATH(); } else if (strcmp(name, MAKE_JOB_PREFIX) == 0) Job_SetPrefix(); else if (strcmp(name, MAKE_EXPORTED) == 0) Var_ExportVars(avalue); } /* Perform the variable variable assignment in the given context. */ void Parse_DoVar(VarAssign *var, GNode *ctxt) { FStr avalue; /* actual value (maybe expanded) */ VarCheckSyntax(var->op, var->value, ctxt); if (VarAssign_Eval(var->varname, var->op, var->value, ctxt, &avalue)) { VarAssignSpecial(var->varname, avalue.str); FStr_Done(&avalue); } free(var->varname); } /* * See if the command possibly calls a sub-make by using the variable * expressions ${.MAKE}, ${MAKE} or the plain word "make". */ static Boolean MaybeSubMake(const char *cmd) { const char *start; for (start = cmd; *start != '\0'; start++) { const char *p = start; char endc; /* XXX: What if progname != "make"? */ if (p[0] == 'm' && p[1] == 'a' && p[2] == 'k' && p[3] == 'e') if (start == cmd || !ch_isalnum(p[-1])) if (!ch_isalnum(p[4])) return TRUE; if (*p != '$') continue; p++; if (*p == '{') endc = '}'; else if (*p == '(') endc = ')'; else continue; p++; if (*p == '.') /* Accept either ${.MAKE} or ${MAKE}. */ p++; if (p[0] == 'M' && p[1] == 'A' && p[2] == 'K' && p[3] == 'E') if (p[4] == endc) return TRUE; } return FALSE; } /* * Append the command to the target node. * * The node may be marked as a submake node if the command is determined to * be that. */ static void ParseAddCmd(GNode *gn, char *cmd) { /* Add to last (ie current) cohort for :: targets */ if ((gn->type & OP_DOUBLEDEP) && gn->cohorts.last != NULL) gn = gn->cohorts.last->datum; /* if target already supplied, ignore commands */ if (!(gn->type & OP_HAS_COMMANDS)) { Lst_Append(&gn->commands, cmd); if (MaybeSubMake(cmd)) gn->type |= OP_SUBMAKE; ParseMark(gn); } else { #if 0 /* XXX: We cannot do this until we fix the tree */ Lst_Append(&gn->commands, cmd); Parse_Error(PARSE_WARNING, "overriding commands for target \"%s\"; " "previous commands defined at %s: %d ignored", gn->name, gn->fname, gn->lineno); #else Parse_Error(PARSE_WARNING, "duplicate script for target \"%s\" ignored", gn->name); ParseErrorInternal(gn->fname, (size_t)gn->lineno, PARSE_WARNING, "using previous script for \"%s\" defined here", gn->name); #endif } } /* * Add a directory to the path searched for included makefiles bracketed * by double-quotes. */ void Parse_AddIncludeDir(const char *dir) { (void)Dir_AddDir(parseIncPath, dir); } /* * Handle one of the .[-ds]include directives by remembering the current file * and pushing the included file on the stack. After the included file has * finished, parsing continues with the including file; see Parse_SetInput * and ParseEOF. * * System includes are looked up in sysIncPath, any other includes are looked * up in the parsedir and then in the directories specified by the -I command * line options. */ static void Parse_include_file(char *file, Boolean isSystem, Boolean depinc, Boolean silent) { struct loadedfile *lf; char *fullname; /* full pathname of file */ char *newName; char *slash, *incdir; int fd; int i; fullname = file[0] == '/' ? bmake_strdup(file) : NULL; if (fullname == NULL && !isSystem) { /* * Include files contained in double-quotes are first searched * relative to the including file's location. We don't want to * cd there, of course, so we just tack on the old file's * leading path components and call Dir_FindFile to see if * we can locate the file. */ incdir = bmake_strdup(CurFile()->fname); slash = strrchr(incdir, '/'); if (slash != NULL) { *slash = '\0'; /* * Now do lexical processing of leading "../" on the * filename. */ for (i = 0; strncmp(file + i, "../", 3) == 0; i += 3) { slash = strrchr(incdir + 1, '/'); if (slash == NULL || strcmp(slash, "/..") == 0) break; *slash = '\0'; } newName = str_concat3(incdir, "/", file + i); fullname = Dir_FindFile(newName, parseIncPath); if (fullname == NULL) fullname = Dir_FindFile(newName, &dirSearchPath); free(newName); } free(incdir); if (fullname == NULL) { /* * Makefile wasn't found in same directory as included * makefile. * * Search for it first on the -I search path, then on * the .PATH search path, if not found in a -I * directory. If we have a suffix-specific path, we * should use that. */ const char *suff; SearchPath *suffPath = NULL; if ((suff = strrchr(file, '.')) != NULL) { suffPath = Suff_GetPath(suff); if (suffPath != NULL) fullname = Dir_FindFile(file, suffPath); } if (fullname == NULL) { fullname = Dir_FindFile(file, parseIncPath); if (fullname == NULL) fullname = Dir_FindFile(file, &dirSearchPath); } } } /* Looking for a system file or file still not found */ if (fullname == NULL) { /* * Look for it on the system path */ SearchPath *path = Lst_IsEmpty(sysIncPath) ? defSysIncPath : sysIncPath; fullname = Dir_FindFile(file, path); } if (fullname == NULL) { if (!silent) Parse_Error(PARSE_FATAL, "Could not find %s", file); return; } /* Actually open the file... */ fd = open(fullname, O_RDONLY); if (fd == -1) { if (!silent) Parse_Error(PARSE_FATAL, "Cannot open %s", fullname); free(fullname); return; } /* load it */ lf = loadfile(fullname, fd); /* Start reading from this file next */ Parse_SetInput(fullname, 0, -1, loadedfile_readMore, lf); CurFile()->lf = lf; if (depinc) doing_depend = depinc; /* only turn it on */ } static void ParseDoInclude(char *line /* XXX: bad name */) { char endc; /* the character which ends the file spec */ char *cp; /* current position in file spec */ Boolean silent = line[0] != 'i'; char *file = line + (silent ? 8 : 7); /* Skip to delimiter character so we know where to look */ pp_skip_hspace(&file); if (*file != '"' && *file != '<') { Parse_Error(PARSE_FATAL, ".include filename must be delimited by '\"' or '<'"); return; } /* * Set the search path on which to find the include file based on the * characters which bracket its name. Angle-brackets imply it's * a system Makefile while double-quotes imply it's a user makefile */ if (*file == '<') endc = '>'; else endc = '"'; /* Skip to matching delimiter */ for (cp = ++file; *cp != '\0' && *cp != endc; cp++) continue; if (*cp != endc) { Parse_Error(PARSE_FATAL, "Unclosed .include filename. '%c' expected", endc); return; } *cp = '\0'; /* * Substitute for any variables in the filename before trying to * find the file. */ (void)Var_Subst(file, VAR_CMDLINE, VARE_WANTRES, &file); /* TODO: handle errors */ Parse_include_file(file, endc == '>', line[0] == 'd', silent); free(file); } /* * Split filename into dirname + basename, then assign these to the * given variables. */ static void SetFilenameVars(const char *filename, const char *dirvar, const char *filevar) { const char *slash, *dirname, *basename; void *freeIt; slash = strrchr(filename, '/'); if (slash == NULL) { dirname = curdir; basename = filename; freeIt = NULL; } else { dirname = freeIt = bmake_strsedup(filename, slash); basename = slash + 1; } Var_Set(dirvar, dirname, VAR_GLOBAL); Var_Set(filevar, basename, VAR_GLOBAL); DEBUG5(PARSE, "%s: ${%s} = `%s' ${%s} = `%s'\n", __func__, dirvar, dirname, filevar, basename); free(freeIt); } /* * Return the immediately including file. * * This is made complicated since the .for loop is implemented as a special * kind of .include; see For_Run. */ static const char * GetActuallyIncludingFile(void) { size_t i; const IFile *incs = GetInclude(0); for (i = includes.len; i >= 2; i--) if (!incs[i - 1].fromForLoop) return incs[i - 2].fname; return NULL; } /* Set .PARSEDIR, .PARSEFILE, .INCLUDEDFROMDIR and .INCLUDEDFROMFILE. */ static void ParseSetParseFile(const char *filename) { const char *including; SetFilenameVars(filename, ".PARSEDIR", ".PARSEFILE"); including = GetActuallyIncludingFile(); if (including != NULL) { SetFilenameVars(including, ".INCLUDEDFROMDIR", ".INCLUDEDFROMFILE"); } else { Var_Delete(".INCLUDEDFROMDIR", VAR_GLOBAL); Var_Delete(".INCLUDEDFROMFILE", VAR_GLOBAL); } } static Boolean StrContainsWord(const char *str, const char *word) { size_t strLen = strlen(str); size_t wordLen = strlen(word); const char *p, *end; if (strLen < wordLen) return FALSE; /* str is too short to contain word */ end = str + strLen - wordLen; for (p = str; p != NULL; p = strchr(p, ' ')) { if (*p == ' ') p++; if (p > end) return FALSE; /* cannot contain word */ if (memcmp(p, word, wordLen) == 0 && (p[wordLen] == '\0' || p[wordLen] == ' ')) return TRUE; } return FALSE; } /* * XXX: Searching through a set of words with this linear search is * inefficient for variables that contain thousands of words. * * XXX: The paths in this list don't seem to be normalized in any way. */ static Boolean VarContainsWord(const char *varname, const char *word) { FStr val = Var_Value(varname, VAR_GLOBAL); Boolean found = val.str != NULL && StrContainsWord(val.str, word); FStr_Done(&val); return found; } /* * Track the makefiles we read - so makefiles can set dependencies on them. * Avoid adding anything more than once. * * Time complexity: O(n) per call, in total O(n^2), where n is the number * of makefiles that have been loaded. */ static void ParseTrackInput(const char *name) { if (!VarContainsWord(MAKE_MAKEFILES, name)) Var_Append(MAKE_MAKEFILES, name, VAR_GLOBAL); } /* * Start parsing from the given source. * * The given file is added to the includes stack. */ void Parse_SetInput(const char *name, int lineno, int fd, ReadMoreProc readMore, void *readMoreArg) { IFile *curFile; char *buf; size_t len; Boolean fromForLoop = name == NULL; if (fromForLoop) name = CurFile()->fname; else ParseTrackInput(name); DEBUG3(PARSE, "Parse_SetInput: %s %s, line %d\n", readMore == loadedfile_readMore ? "file" : ".for loop in", name, lineno); if (fd == -1 && readMore == NULL) /* sanity */ return; curFile = Vector_Push(&includes); curFile->fname = bmake_strdup(name); curFile->fromForLoop = fromForLoop; curFile->lineno = lineno; curFile->first_lineno = lineno; curFile->readMore = readMore; curFile->readMoreArg = readMoreArg; curFile->lf = NULL; curFile->depending = doing_depend; /* restore this on EOF */ assert(readMore != NULL); /* Get first block of input data */ buf = curFile->readMore(curFile->readMoreArg, &len); if (buf == NULL) { /* Was all a waste of time ... */ if (curFile->fname != NULL) free(curFile->fname); free(curFile); return; } curFile->buf_freeIt = buf; curFile->buf_ptr = buf; curFile->buf_end = buf + len; curFile->cond_depth = Cond_save_depth(); ParseSetParseFile(name); } /* Check if the directive is an include directive. */ static Boolean IsInclude(const char *dir, Boolean sysv) { if (dir[0] == 's' || dir[0] == '-' || (dir[0] == 'd' && !sysv)) dir++; if (strncmp(dir, "include", 7) != 0) return FALSE; /* Space is not mandatory for BSD .include */ return !sysv || ch_isspace(dir[7]); } #ifdef SYSVINCLUDE /* Check if the line is a SYSV include directive. */ static Boolean IsSysVInclude(const char *line) { const char *p; if (!IsInclude(line, TRUE)) return FALSE; /* Avoid interpreting a dependency line as an include */ for (p = line; (p = strchr(p, ':')) != NULL;) { /* end of line -> it's a dependency */ if (*++p == '\0') return FALSE; /* '::' operator or ': ' -> it's a dependency */ if (*p == ':' || ch_isspace(*p)) return FALSE; } return TRUE; } /* Push to another file. The line points to the word "include". */ static void ParseTraditionalInclude(char *line) { char *cp; /* current position in file spec */ Boolean done = FALSE; Boolean silent = line[0] != 'i'; char *file = line + (silent ? 8 : 7); char *all_files; DEBUG2(PARSE, "%s: %s\n", __func__, file); pp_skip_whitespace(&file); /* * Substitute for any variables in the file name before trying to * find the thing. */ (void)Var_Subst(file, VAR_CMDLINE, VARE_WANTRES, &all_files); /* TODO: handle errors */ if (*file == '\0') { Parse_Error(PARSE_FATAL, "Filename missing from \"include\""); goto out; } for (file = all_files; !done; file = cp + 1) { /* Skip to end of line or next whitespace */ for (cp = file; *cp != '\0' && !ch_isspace(*cp); cp++) continue; if (*cp != '\0') *cp = '\0'; else done = TRUE; Parse_include_file(file, FALSE, FALSE, silent); } out: free(all_files); } #endif #ifdef GMAKEEXPORT /* Parse "export =", and actually export it. */ static void ParseGmakeExport(char *line) { char *variable = line + 6; char *value; DEBUG2(PARSE, "%s: %s\n", __func__, variable); pp_skip_whitespace(&variable); for (value = variable; *value != '\0' && *value != '='; value++) continue; if (*value != '=') { Parse_Error(PARSE_FATAL, "Variable/Value missing from \"export\""); return; } *value++ = '\0'; /* terminate variable */ /* * Expand the value before putting it in the environment. */ (void)Var_Subst(value, VAR_CMDLINE, VARE_WANTRES, &value); /* TODO: handle errors */ setenv(variable, value, 1); free(value); } #endif /* * Called when EOF is reached in the current file. If we were reading an * include file or a .for loop, the includes stack is popped and things set * up to go back to reading the previous file at the previous location. * * Results: * TRUE to continue parsing, i.e. it had only reached the end of an * included file, FALSE if the main file has been parsed completely. */ static Boolean ParseEOF(void) { char *ptr; size_t len; IFile *curFile = CurFile(); assert(curFile->readMore != NULL); doing_depend = curFile->depending; /* restore this */ /* get next input buffer, if any */ ptr = curFile->readMore(curFile->readMoreArg, &len); curFile->buf_ptr = ptr; curFile->buf_freeIt = ptr; curFile->buf_end = ptr == NULL ? NULL : ptr + len; curFile->lineno = curFile->first_lineno; if (ptr != NULL) return TRUE; /* Iterate again */ /* Ensure the makefile (or loop) didn't have mismatched conditionals */ Cond_restore_depth(curFile->cond_depth); if (curFile->lf != NULL) { loadedfile_destroy(curFile->lf); curFile->lf = NULL; } /* Dispose of curFile info */ /* Leak curFile->fname because all the gnodes have pointers to it. */ free(curFile->buf_freeIt); Vector_Pop(&includes); if (includes.len == 0) { /* We've run out of input */ Var_Delete(".PARSEDIR", VAR_GLOBAL); Var_Delete(".PARSEFILE", VAR_GLOBAL); Var_Delete(".INCLUDEDFROMDIR", VAR_GLOBAL); Var_Delete(".INCLUDEDFROMFILE", VAR_GLOBAL); return FALSE; } curFile = CurFile(); DEBUG2(PARSE, "ParseEOF: returning to file %s, line %d\n", curFile->fname, curFile->lineno); ParseSetParseFile(curFile->fname); return TRUE; } typedef enum ParseRawLineResult { PRLR_LINE, PRLR_EOF, PRLR_ERROR } ParseRawLineResult; /* * Parse until the end of a line, taking into account lines that end with * backslash-newline. */ static ParseRawLineResult ParseRawLine(IFile *curFile, char **out_line, char **out_line_end, char **out_firstBackslash, char **out_firstComment) { char *line = curFile->buf_ptr; char *p = line; char *line_end = line; char *firstBackslash = NULL; char *firstComment = NULL; ParseRawLineResult res = PRLR_LINE; curFile->lineno++; for (;;) { char ch; if (p == curFile->buf_end) { res = PRLR_EOF; break; } ch = *p; if (ch == '\0' || (ch == '\\' && p + 1 < curFile->buf_end && p[1] == '\0')) { Parse_Error(PARSE_FATAL, "Zero byte read from file"); return PRLR_ERROR; } /* Treat next character after '\' as literal. */ if (ch == '\\') { if (firstBackslash == NULL) firstBackslash = p; if (p[1] == '\n') { curFile->lineno++; if (p + 2 == curFile->buf_end) { line_end = p; *line_end = '\n'; p += 2; continue; } } p += 2; line_end = p; assert(p <= curFile->buf_end); continue; } /* * Remember the first '#' for comment stripping, unless * the previous char was '[', as in the modifier ':[#]'. */ if (ch == '#' && firstComment == NULL && !(p > line && p[-1] == '[')) firstComment = line_end; p++; if (ch == '\n') break; /* We are not interested in trailing whitespace. */ if (!ch_isspace(ch)) line_end = p; } *out_line = line; curFile->buf_ptr = p; *out_line_end = line_end; *out_firstBackslash = firstBackslash; *out_firstComment = firstComment; return res; } /* * Beginning at start, unescape '\#' to '#' and replace backslash-newline * with a single space. */ static void UnescapeBackslash(char *line, char *start) { char *src = start; char *dst = start; char *spaceStart = line; for (;;) { char ch = *src++; if (ch != '\\') { if (ch == '\0') break; *dst++ = ch; continue; } ch = *src++; if (ch == '\0') { /* Delete '\\' at end of buffer */ dst--; break; } /* Delete '\\' from before '#' on non-command lines */ if (ch == '#' && line[0] != '\t') { *dst++ = ch; continue; } if (ch != '\n') { /* Leave '\\' in buffer for later */ *dst++ = '\\'; /* * Make sure we don't delete an escaped ' ' from the * line end. */ spaceStart = dst + 1; *dst++ = ch; continue; } /* * Escaped '\n' -- replace following whitespace with a single * ' '. */ pp_skip_hspace(&src); *dst++ = ' '; } /* Delete any trailing spaces - eg from empty continuations */ while (dst > spaceStart && ch_isspace(dst[-1])) dst--; *dst = '\0'; } typedef enum GetLineMode { /* * Return the next line that is neither empty nor a comment. * Backslash line continuations are folded into a single space. * A trailing comment, if any, is discarded. */ GLM_NONEMPTY, /* * Return the next line, even if it is empty or a comment. * Preserve backslash-newline to keep the line numbers correct. * * Used in .for loops to collect the body of the loop while waiting * for the corresponding .endfor. */ GLM_FOR_BODY, /* * Return the next line that starts with a dot. * Backslash line continuations are folded into a single space. * A trailing comment, if any, is discarded. * * Used in .if directives to skip over irrelevant branches while * waiting for the corresponding .endif. */ GLM_DOT } GetLineMode; /* Return the next "interesting" logical line from the current file. */ static char * ParseGetLine(GetLineMode mode) { IFile *curFile = CurFile(); char *line; char *line_end; char *firstBackslash; char *firstComment; /* Loop through blank lines and comment lines */ for (;;) { ParseRawLineResult res = ParseRawLine(curFile, &line, &line_end, &firstBackslash, &firstComment); if (res == PRLR_ERROR) return NULL; if (line_end == line || firstComment == line) { if (res == PRLR_EOF) return NULL; if (mode != GLM_FOR_BODY) continue; } /* We now have a line of data */ assert(ch_isspace(*line_end)); *line_end = '\0'; if (mode == GLM_FOR_BODY) return line; /* Don't join the physical lines. */ if (mode == GLM_DOT && line[0] != '.') continue; break; } /* Brutally ignore anything after a non-escaped '#' in non-commands. */ if (firstComment != NULL && line[0] != '\t') *firstComment = '\0'; /* If we didn't see a '\\' then the in-situ data is fine. */ if (firstBackslash == NULL) return line; /* Remove escapes from '\n' and '#' */ UnescapeBackslash(line, firstBackslash); return line; } static Boolean ParseSkippedBranches(void) { char *line; while ((line = ParseGetLine(GLM_DOT)) != NULL) { if (Cond_EvalLine(line) == COND_PARSE) break; /* * TODO: Check for typos in .elif directives * such as .elsif or .elseif. * * This check will probably duplicate some of * the code in ParseLine. Most of the code * there cannot apply, only ParseVarassign and * ParseDependency can, and to prevent code * duplication, these would need to be called * with a flag called onlyCheckSyntax. * * See directive-elif.mk for details. */ } return line != NULL; } static Boolean ParseForLoop(const char *line) { int rval; int firstLineno; rval = For_Eval(line); if (rval == 0) return FALSE; /* Not a .for line */ if (rval < 0) return TRUE; /* Syntax error - error printed, ignore line */ firstLineno = CurFile()->lineno; /* Accumulate loop lines until matching .endfor */ do { line = ParseGetLine(GLM_FOR_BODY); if (line == NULL) { Parse_Error(PARSE_FATAL, "Unexpected end of file in for loop."); break; } } while (For_Accum(line)); For_Run(firstLineno); /* Stash each iteration as a new 'input file' */ return TRUE; /* Read next line from for-loop buffer */ } /* * Read an entire line from the input file. * * Empty lines, .if and .for are completely handled by this function, * leaving only variable assignments, other directives, dependency lines * and shell commands to the caller. * * Results: * A line without its newline and without any trailing whitespace, * or NULL. */ static char * ParseReadLine(void) { char *line; for (;;) { line = ParseGetLine(GLM_NONEMPTY); if (line == NULL) return NULL; if (line[0] != '.') return line; /* * The line might be a conditional. Ask the conditional module * about it and act accordingly */ switch (Cond_EvalLine(line)) { case COND_SKIP: if (!ParseSkippedBranches()) return NULL; continue; case COND_PARSE: continue; case COND_INVALID: /* Not a conditional line */ if (ParseForLoop(line)) continue; break; } return line; } } static void FinishDependencyGroup(void) { GNodeListNode *ln; if (targets == NULL) return; for (ln = targets->first; ln != NULL; ln = ln->next) { GNode *gn = ln->datum; Suff_EndTransform(gn); /* * Mark the target as already having commands if it does, to * keep from having shell commands on multiple dependency * lines. */ if (!Lst_IsEmpty(&gn->commands)) gn->type |= OP_HAS_COMMANDS; } Lst_Free(targets); targets = NULL; } /* Add the command to each target from the current dependency spec. */ static void ParseLine_ShellCommand(const char *p) { cpp_skip_whitespace(&p); if (*p == '\0') return; /* skip empty commands */ if (targets == NULL) { Parse_Error(PARSE_FATAL, "Unassociated shell command \"%s\"", p); return; } { char *cmd = bmake_strdup(p); GNodeListNode *ln; for (ln = targets->first; ln != NULL; ln = ln->next) { GNode *gn = ln->datum; ParseAddCmd(gn, cmd); } #ifdef CLEANUP Lst_Append(&targCmds, cmd); #endif } } MAKE_INLINE Boolean IsDirective(const char *dir, size_t dirlen, const char *name) { return dirlen == strlen(name) && memcmp(dir, name, dirlen) == 0; } /* * See if the line starts with one of the known directives, and if so, handle * the directive. */ static Boolean ParseDirective(char *line) { char *cp = line + 1; const char *dir, *arg; size_t dirlen; pp_skip_whitespace(&cp); if (IsInclude(cp, FALSE)) { ParseDoInclude(cp); return TRUE; } dir = cp; while (ch_isalpha(*cp) || *cp == '-') cp++; dirlen = (size_t)(cp - dir); if (*cp != '\0' && !ch_isspace(*cp)) return FALSE; pp_skip_whitespace(&cp); arg = cp; if (IsDirective(dir, dirlen, "undef")) { Var_Undef(cp); return TRUE; } else if (IsDirective(dir, dirlen, "export")) { Var_Export(VEM_PLAIN, arg); return TRUE; } else if (IsDirective(dir, dirlen, "export-env")) { Var_Export(VEM_ENV, arg); return TRUE; } else if (IsDirective(dir, dirlen, "export-literal")) { Var_Export(VEM_LITERAL, arg); return TRUE; } else if (IsDirective(dir, dirlen, "unexport")) { Var_UnExport(FALSE, arg); return TRUE; } else if (IsDirective(dir, dirlen, "unexport-env")) { Var_UnExport(TRUE, arg); return TRUE; } else if (IsDirective(dir, dirlen, "info")) { ParseMessage(PARSE_INFO, "info", arg); return TRUE; } else if (IsDirective(dir, dirlen, "warning")) { ParseMessage(PARSE_WARNING, "warning", arg); return TRUE; } else if (IsDirective(dir, dirlen, "error")) { ParseMessage(PARSE_FATAL, "error", arg); return TRUE; } return FALSE; } static Boolean ParseVarassign(const char *line) { VarAssign var; if (!Parse_IsVar(line, &var)) return FALSE; FinishDependencyGroup(); Parse_DoVar(&var, VAR_GLOBAL); return TRUE; } static char * FindSemicolon(char *p) { int level = 0; for (; *p != '\0'; p++) { if (*p == '\\' && p[1] != '\0') { p++; continue; } if (*p == '$' && (p[1] == '(' || p[1] == '{')) level++; else if (level > 0 && (*p == ')' || *p == '}')) level--; else if (level == 0 && *p == ';') break; } return p; } /* * dependency -> target... op [source...] * op -> ':' | '::' | '!' */ static void ParseDependency(char *line) { VarEvalFlags eflags; char *expanded_line; const char *shellcmd = NULL; /* * For some reason - probably to make the parser impossible - * a ';' can be used to separate commands from dependencies. * Attempt to avoid ';' inside substitution patterns. */ { char *semicolon = FindSemicolon(line); if (*semicolon != '\0') { /* Terminate the dependency list at the ';' */ *semicolon = '\0'; shellcmd = semicolon + 1; } } /* * We now know it's a dependency line so it needs to have all * variables expanded before being parsed. * * XXX: Ideally the dependency line would first be split into * its left-hand side, dependency operator and right-hand side, * and then each side would be expanded on its own. This would * allow for the left-hand side to allow only defined variables * and to allow variables on the right-hand side to be undefined * as well. * * Parsing the line first would also prevent that targets * generated from variable expressions are interpreted as the * dependency operator, such as in "target${:U\:} middle: source", * in which the middle is interpreted as a source, not a target. */ /* In lint mode, allow undefined variables to appear in * dependency lines. * * Ideally, only the right-hand side would allow undefined * variables since it is common to have optional dependencies. * Having undefined variables on the left-hand side is more * unusual though. Since both sides are expanded in a single * pass, there is not much choice what to do here. * * In normal mode, it does not matter whether undefined * variables are allowed or not since as of 2020-09-14, * Var_Parse does not print any parse errors in such a case. * It simply returns the special empty string var_Error, * which cannot be detected in the result of Var_Subst. */ eflags = opts.strict ? VARE_WANTRES : VARE_WANTRES | VARE_UNDEFERR; (void)Var_Subst(line, VAR_CMDLINE, eflags, &expanded_line); /* TODO: handle errors */ /* Need a fresh list for the target nodes */ if (targets != NULL) Lst_Free(targets); targets = Lst_New(); ParseDoDependency(expanded_line); free(expanded_line); if (shellcmd != NULL) ParseLine_ShellCommand(shellcmd); } static void ParseLine(char *line) { /* * Lines that begin with '.' can be pretty much anything: * - directives like '.include' or '.if', * - suffix rules like '.c.o:', * - dependencies for filenames that start with '.', * - variable assignments like '.tmp=value'. */ if (line[0] == '.' && ParseDirective(line)) return; if (line[0] == '\t') { ParseLine_ShellCommand(line + 1); return; } #ifdef SYSVINCLUDE if (IsSysVInclude(line)) { /* * It's an S3/S5-style "include". */ ParseTraditionalInclude(line); return; } #endif #ifdef GMAKEEXPORT if (strncmp(line, "export", 6) == 0 && ch_isspace(line[6]) && strchr(line, ':') == NULL) { /* * It's a Gmake "export". */ ParseGmakeExport(line); return; } #endif if (ParseVarassign(line)) return; FinishDependencyGroup(); ParseDependency(line); } /* * Parse a top-level makefile, incorporating its content into the global * dependency graph. * * Input: * name The name of the file being read * fd The open file to parse; will be closed at the end */ void Parse_File(const char *name, int fd) { char *line; /* the line we're working on */ struct loadedfile *lf; lf = loadfile(name, fd); assert(targets == NULL); if (name == NULL) name = "(stdin)"; Parse_SetInput(name, 0, -1, loadedfile_readMore, lf); CurFile()->lf = lf; do { while ((line = ParseReadLine()) != NULL) { DEBUG2(PARSE, "ParseReadLine (%d): '%s'\n", CurFile()->lineno, line); ParseLine(line); } /* Reached EOF, but it may be just EOF of an include file. */ } while (ParseEOF()); FinishDependencyGroup(); if (fatals != 0) { (void)fflush(stdout); (void)fprintf(stderr, "%s: Fatal errors encountered -- cannot continue", progname); PrintOnError(NULL, NULL); exit(1); } } /* Initialize the parsing module. */ void Parse_Init(void) { mainNode = NULL; parseIncPath = SearchPath_New(); sysIncPath = SearchPath_New(); defSysIncPath = SearchPath_New(); Vector_Init(&includes, sizeof(IFile)); } /* Clean up the parsing module. */ void Parse_End(void) { #ifdef CLEANUP Lst_DoneCall(&targCmds, free); assert(targets == NULL); SearchPath_Free(defSysIncPath); SearchPath_Free(sysIncPath); SearchPath_Free(parseIncPath); assert(includes.len == 0); Vector_Done(&includes); #endif } /* * Return a list containing the single main target to create. * If no such target exists, we Punt with an obnoxious error message. */ void Parse_MainName(GNodeList *mainList) { if (mainNode == NULL) Punt("no target to make."); if (mainNode->type & OP_DOUBLEDEP) { Lst_Append(mainList, mainNode); Lst_AppendAll(mainList, &mainNode->cohorts); } else Lst_Append(mainList, mainNode); Var_Append(".TARGETS", mainNode->name, VAR_GLOBAL); } int Parse_GetFatals(void) { return fatals; }