/*- * SPDX-License-Identifier: BSD-3-Clause * * Copyright (c) 1992 Keith Muller. * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Keith Muller of the University of California, San Diego. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if 0 #ifndef lint static char sccsid[] = "@(#)options.c 8.2 (Berkeley) 4/18/94"; #endif /* not lint */ #endif #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include "pax.h" #include "options.h" #include "cpio.h" #include "tar.h" #include "extern.h" /* * Routines which handle command line options */ static char flgch[] = FLGCH; /* list of all possible flags */ static OPLIST *ophead = NULL; /* head for format specific options -x */ static OPLIST *optail = NULL; /* option tail */ static int no_op(void); static void printflg(unsigned int); static int c_frmt(const void *, const void *); static off_t str_offt(char *); static char *get_line(FILE *fp); static void pax_options(int, char **); static void pax_usage(void); static void tar_options(int, char **); static void tar_usage(void); static void cpio_options(int, char **); static void cpio_usage(void); /* errors from get_line */ #define GETLINE_FILE_CORRUPT 1 #define GETLINE_OUT_OF_MEM 2 static int get_line_error; char *chdname; #define GZIP_CMD "gzip" /* command to run as gzip */ #define COMPRESS_CMD "compress" /* command to run as compress */ #define BZIP2_CMD "bzip2" /* command to run as bzip2 */ /* * Format specific routine table - MUST BE IN SORTED ORDER BY NAME * (see pax.h for description of each function) * * name, blksz, hdsz, udev, hlk, blkagn, inhead, id, st_read, * read, end_read, st_write, write, end_write, trail, * rd_data, wr_data, options */ FSUB fsub[] = { /* 0: OLD BINARY CPIO */ {"bcpio", 5120, sizeof(HD_BCPIO), 1, 0, 0, 1, bcpio_id, cpio_strd, bcpio_rd, bcpio_endrd, cpio_stwr, bcpio_wr, cpio_endwr, cpio_trail, NULL, rd_wrfile, wr_rdfile, bad_opt}, /* 1: OLD OCTAL CHARACTER CPIO */ {"cpio", 5120, sizeof(HD_CPIO), 1, 0, 0, 1, cpio_id, cpio_strd, cpio_rd, cpio_endrd, cpio_stwr, cpio_wr, cpio_endwr, cpio_trail, NULL, rd_wrfile, wr_rdfile, bad_opt}, /* 2: SVR4 HEX CPIO */ {"sv4cpio", 5120, sizeof(HD_VCPIO), 1, 0, 0, 1, vcpio_id, cpio_strd, vcpio_rd, vcpio_endrd, cpio_stwr, vcpio_wr, cpio_endwr, cpio_trail, NULL, rd_wrfile, wr_rdfile, bad_opt}, /* 3: SVR4 HEX CPIO WITH CRC */ {"sv4crc", 5120, sizeof(HD_VCPIO), 1, 0, 0, 1, crc_id, crc_strd, vcpio_rd, vcpio_endrd, crc_stwr, vcpio_wr, cpio_endwr, cpio_trail, NULL, rd_wrfile, wr_rdfile, bad_opt}, /* 4: OLD TAR */ {"tar", 10240, BLKMULT, 0, 1, BLKMULT, 0, tar_id, no_op, tar_rd, tar_endrd, no_op, tar_wr, tar_endwr, NULL, tar_trail, rd_wrfile, wr_rdfile, tar_opt}, /* 5: POSIX USTAR */ {"ustar", 10240, BLKMULT, 0, 1, BLKMULT, 0, ustar_id, ustar_strd, ustar_rd, tar_endrd, ustar_stwr, ustar_wr, tar_endwr, NULL, tar_trail, rd_wrfile, wr_rdfile, bad_opt}, }; #define F_OCPIO 0 /* format when called as cpio -6 */ #define F_ACPIO 1 /* format when called as cpio -c */ #define F_SCPIO 2 /* format when called with -x sv4cpio */ #define F_CPIO 3 /* format when called as cpio */ #define F_OTAR 4 /* format when called as tar -o */ #define F_TAR 5 /* format when called as tar */ #define DEFLT F_TAR /* default write format from list above */ /* * ford is the archive search order used by get_arc() to determine what kind * of archive we are dealing with. This helps to properly id archive formats * some formats may be subsets of others.... */ int ford[] = {F_TAR, F_OTAR, F_CPIO, F_SCPIO, F_ACPIO, F_OCPIO, -1 }; /* * options() * figure out if we are pax, tar or cpio. Call the appropriate options * parser */ void options(int argc, char **argv) { /* * Are we acting like pax, tar or cpio (based on argv[0]) */ if ((argv0 = strrchr(argv[0], '/')) != NULL) argv0++; else argv0 = argv[0]; if (strcmp(NM_TAR, argv0) == 0) { tar_options(argc, argv); return; } else if (strcmp(NM_CPIO, argv0) == 0) { cpio_options(argc, argv); return; } /* * assume pax as the default */ argv0 = NM_PAX; pax_options(argc, argv); return; } /* * pax_options() * look at the user specified flags. set globals as required and check if * the user specified a legal set of flags. If not, complain and exit */ static void pax_options(int argc, char **argv) { int c; size_t i; unsigned int flg = 0; unsigned int bflg = 0; char *pt; FSUB tmp; /* * process option flags */ while ((c=getopt(argc,argv,"ab:cdf:iklno:p:rs:tuvwx:zB:DE:G:HLOPT:U:XYZ")) != -1) { switch (c) { case 'a': /* * append */ flg |= AF; break; case 'b': /* * specify blocksize */ flg |= BF; if ((wrblksz = (int)str_offt(optarg)) <= 0) { paxwarn(1, "Invalid block size %s", optarg); pax_usage(); } break; case 'c': /* * inverse match on patterns */ cflag = 1; flg |= CF; break; case 'd': /* * match only dir on extract, not the subtree at dir */ dflag = 1; flg |= DF; break; case 'f': /* * filename where the archive is stored */ arcname = optarg; flg |= FF; break; case 'i': /* * interactive file rename */ iflag = 1; flg |= IF; break; case 'k': /* * do not clobber files that exist */ kflag = 1; flg |= KF; break; case 'l': /* * try to link src to dest with copy (-rw) */ lflag = 1; flg |= LF; break; case 'n': /* * select first match for a pattern only */ nflag = 1; flg |= NF; break; case 'o': /* * pass format specific options */ flg |= OF; if (opt_add(optarg) < 0) pax_usage(); break; case 'p': /* * specify file characteristic options */ for (pt = optarg; *pt != '\0'; ++pt) { switch(*pt) { case 'a': /* * do not preserve access time */ patime = 0; break; case 'e': /* * preserve user id, group id, file * mode, access/modification times */ pids = 1; pmode = 1; patime = 1; pmtime = 1; break; case 'm': /* * do not preserve modification time */ pmtime = 0; break; case 'o': /* * preserve uid/gid */ pids = 1; break; case 'p': /* * preserve file mode bits */ pmode = 1; break; default: paxwarn(1, "Invalid -p string: %c", *pt); pax_usage(); break; } } flg |= PF; break; case 'r': /* * read the archive */ flg |= RF; break; case 's': /* * file name substitution name pattern */ if (rep_add(optarg) < 0) { pax_usage(); break; } flg |= SF; break; case 't': /* * preserve access time on file system nodes we read */ tflag = 1; flg |= TF; break; case 'u': /* * ignore those older files */ uflag = 1; flg |= UF; break; case 'v': /* * verbose operation mode */ vflag = 1; flg |= VF; break; case 'w': /* * write an archive */ flg |= WF; break; case 'x': /* * specify an archive format on write */ tmp.name = optarg; if ((frmt = (FSUB *)bsearch((void *)&tmp, (void *)fsub, sizeof(fsub)/sizeof(FSUB), sizeof(FSUB), c_frmt)) != NULL) { flg |= XF; break; } paxwarn(1, "Unknown -x format: %s", optarg); (void)fputs("pax: Known -x formats are:", stderr); for (i = 0; i < (sizeof(fsub)/sizeof(FSUB)); ++i) (void)fprintf(stderr, " %s", fsub[i].name); (void)fputs("\n\n", stderr); pax_usage(); break; case 'z': /* * use gzip. Non standard option. */ gzip_program = GZIP_CMD; break; case 'B': /* * non-standard option on number of bytes written on a * single archive volume. */ if ((wrlimit = str_offt(optarg)) <= 0) { paxwarn(1, "Invalid write limit %s", optarg); pax_usage(); } if (wrlimit % BLKMULT) { paxwarn(1, "Write limit is not a %d byte multiple", BLKMULT); pax_usage(); } flg |= CBF; break; case 'D': /* * On extraction check file inode change time before the * modification of the file name. Non standard option. */ Dflag = 1; flg |= CDF; break; case 'E': /* * non-standard limit on read faults * 0 indicates stop after first error, values * indicate a limit, "NONE" try forever */ flg |= CEF; if (strcmp(NONE, optarg) == 0) maxflt = -1; else if ((maxflt = atoi(optarg)) < 0) { paxwarn(1, "Error count value must be positive"); pax_usage(); } break; case 'G': /* * non-standard option for selecting files within an * archive by group (gid or name) */ if (grp_add(optarg) < 0) { pax_usage(); break; } flg |= CGF; break; case 'H': /* * follow command line symlinks only */ Hflag = 1; flg |= CHF; break; case 'L': /* * follow symlinks */ Lflag = 1; flg |= CLF; break; case 'O': /* * Force one volume. Non standard option. */ Oflag = 1; break; case 'P': /* * do NOT follow symlinks (default) */ Lflag = 0; flg |= CPF; break; case 'T': /* * non-standard option for selecting files within an * archive by modification time range (lower,upper) */ if (trng_add(optarg) < 0) { pax_usage(); break; } flg |= CTF; break; case 'U': /* * non-standard option for selecting files within an * archive by user (uid or name) */ if (usr_add(optarg) < 0) { pax_usage(); break; } flg |= CUF; break; case 'X': /* * do not pass over mount points in the file system */ Xflag = 1; flg |= CXF; break; case 'Y': /* * On extraction check file inode change time after the * modification of the file name. Non standard option. */ Yflag = 1; flg |= CYF; break; case 'Z': /* * On extraction check modification time after the * modification of the file name. Non standard option. */ Zflag = 1; flg |= CZF; break; default: pax_usage(); break; } } /* * figure out the operation mode of pax read,write,extract,copy,append * or list. check that we have not been given a bogus set of flags * for the operation mode. */ if (ISLIST(flg)) { act = LIST; listf = stdout; bflg = flg & BDLIST; } else if (ISEXTRACT(flg)) { act = EXTRACT; bflg = flg & BDEXTR; } else if (ISARCHIVE(flg)) { act = ARCHIVE; bflg = flg & BDARCH; } else if (ISAPPND(flg)) { act = APPND; bflg = flg & BDARCH; } else if (ISCOPY(flg)) { act = COPY; bflg = flg & BDCOPY; } else pax_usage(); if (bflg) { printflg(flg); pax_usage(); } /* * if we are writing (ARCHIVE) we use the default format if the user * did not specify a format. when we write during an APPEND, we will * adopt the format of the existing archive if none was supplied. */ if (!(flg & XF) && (act == ARCHIVE)) frmt = &(fsub[DEFLT]); /* * process the args as they are interpreted by the operation mode */ switch (act) { case LIST: case EXTRACT: for (; optind < argc; optind++) if (pat_add(argv[optind], NULL) < 0) pax_usage(); break; case COPY: if (optind >= argc) { paxwarn(0, "Destination directory was not supplied"); pax_usage(); } --argc; dirptr = argv[argc]; /* FALLTHROUGH */ case ARCHIVE: case APPND: for (; optind < argc; optind++) if (ftree_add(argv[optind], 0) < 0) pax_usage(); /* * no read errors allowed on updates/append operation! */ maxflt = 0; break; } } /* * tar_options() * look at the user specified flags. set globals as required and check if * the user specified a legal set of flags. If not, complain and exit */ static void tar_options(int argc, char **argv) { int c; int fstdin = 0; int tar_Oflag = 0; int nincfiles = 0; int incfiles_max = 0; struct incfile { char *file; char *dir; }; struct incfile *incfiles = NULL; /* * Set default values. */ rmleadslash = 1; /* * process option flags */ while ((c = getoldopt(argc, argv, "b:cef:hjmopqruts:vwxyzBC:HI:LOPXZ014578")) != -1) { switch(c) { case 'b': /* * specify blocksize in 512-byte blocks */ if ((wrblksz = (int)str_offt(optarg)) <= 0) { paxwarn(1, "Invalid block size %s", optarg); tar_usage(); } wrblksz *= 512; /* XXX - check for int oflow */ break; case 'c': /* * create an archive */ act = ARCHIVE; break; case 'e': /* * stop after first error */ maxflt = 0; break; case 'f': /* * filename where the archive is stored */ if ((optarg[0] == '-') && (optarg[1]== '\0')) { /* * treat a - as stdin */ fstdin = 1; arcname = NULL; break; } fstdin = 0; arcname = optarg; break; case 'h': /* * follow symlinks */ Lflag = 1; break; case 'j': case 'y': /* * use bzip2. Non standard option. */ gzip_program = BZIP2_CMD; break; case 'm': /* * do not preserve modification time */ pmtime = 0; break; case 'o': if (opt_add("write_opt=nodir") < 0) tar_usage(); case 'O': tar_Oflag = 1; break; case 'p': /* * preserve uid/gid and file mode, regardless of umask */ pmode = 1; pids = 1; break; case 'q': /* * select first match for a pattern only */ nflag = 1; break; case 'r': case 'u': /* * append to the archive */ act = APPND; break; case 's': /* * file name substitution name pattern */ if (rep_add(optarg) < 0) { tar_usage(); break; } break; case 't': /* * list contents of the tape */ act = LIST; break; case 'v': /* * verbose operation mode */ vflag++; break; case 'w': /* * interactive file rename */ iflag = 1; break; case 'x': /* * extract an archive, preserving mode, * and mtime if possible. */ act = EXTRACT; pmtime = 1; break; case 'z': /* * use gzip. Non standard option. */ gzip_program = GZIP_CMD; break; case 'B': /* * Nothing to do here, this is pax default */ break; case 'C': chdname = optarg; break; case 'H': /* * follow command line symlinks only */ Hflag = 1; break; case 'I': if (++nincfiles > incfiles_max) { incfiles_max = nincfiles + 3; incfiles = realloc(incfiles, sizeof(*incfiles) * incfiles_max); if (incfiles == NULL) { paxwarn(0, "Unable to allocate space " "for option list"); exit(1); } } incfiles[nincfiles - 1].file = optarg; incfiles[nincfiles - 1].dir = chdname; break; case 'L': /* * follow symlinks */ Lflag = 1; break; case 'P': /* * do not remove leading '/' from pathnames */ rmleadslash = 0; break; case 'X': /* * do not pass over mount points in the file system */ Xflag = 1; break; case 'Z': /* * use compress. */ gzip_program = COMPRESS_CMD; break; case '0': arcname = DEV_0; break; case '1': arcname = DEV_1; break; case '4': arcname = DEV_4; break; case '5': arcname = DEV_5; break; case '7': arcname = DEV_7; break; case '8': arcname = DEV_8; break; default: tar_usage(); break; } } argc -= optind; argv += optind; /* Traditional tar behaviour (pax uses stderr unless in list mode) */ if (fstdin == 1 && act == ARCHIVE) listf = stderr; else listf = stdout; /* Traditional tar behaviour (pax wants to read file list from stdin) */ if ((act == ARCHIVE || act == APPND) && argc == 0 && nincfiles == 0) exit(0); /* * if we are writing (ARCHIVE) specify tar, otherwise run like pax * (unless -o specified) */ if (act == ARCHIVE || act == APPND) frmt = &(fsub[tar_Oflag ? F_OTAR : F_TAR]); else if (tar_Oflag) { paxwarn(1, "The -O/-o options are only valid when writing an archive"); tar_usage(); /* only valid when writing */ } /* * process the args as they are interpreted by the operation mode */ switch (act) { case LIST: case EXTRACT: default: { int sawpat = 0; char *file, *dir = NULL; while (nincfiles || *argv != NULL) { /* * If we queued up any include files, * pull them in now. Otherwise, check * for -I and -C positional flags. * Anything else must be a file to * extract. */ if (nincfiles) { file = incfiles->file; dir = incfiles->dir; incfiles++; nincfiles--; } else if (strcmp(*argv, "-I") == 0) { if (*++argv == NULL) break; file = *argv++; dir = chdname; } else file = NULL; if (file != NULL) { FILE *fp; char *str; if (strcmp(file, "-") == 0) fp = stdin; else if ((fp = fopen(file, "r")) == NULL) { paxwarn(1, "Unable to open file '%s' for read", file); tar_usage(); } while ((str = get_line(fp)) != NULL) { if (pat_add(str, dir) < 0) tar_usage(); sawpat = 1; } if (strcmp(file, "-") != 0) fclose(fp); if (get_line_error) { paxwarn(1, "Problem with file '%s'", file); tar_usage(); } } else if (strcmp(*argv, "-C") == 0) { if (*++argv == NULL) break; chdname = *argv++; } else if (pat_add(*argv++, chdname) < 0) tar_usage(); else sawpat = 1; } /* * if patterns were added, we are doing chdir() * on a file-by-file basis, else, just one * global chdir (if any) after opening input. */ if (sawpat > 0) chdname = NULL; } break; case ARCHIVE: case APPND: if (chdname != NULL) { /* initial chdir() */ if (ftree_add(chdname, 1) < 0) tar_usage(); } while (nincfiles || *argv != NULL) { char *file, *dir = NULL; /* * If we queued up any include files, pull them in * now. Otherwise, check for -I and -C positional * flags. Anything else must be a file to include * in the archive. */ if (nincfiles) { file = incfiles->file; dir = incfiles->dir; incfiles++; nincfiles--; } else if (strcmp(*argv, "-I") == 0) { if (*++argv == NULL) break; file = *argv++; dir = NULL; } else file = NULL; if (file != NULL) { FILE *fp; char *str; /* Set directory if needed */ if (dir) { if (ftree_add(dir, 1) < 0) tar_usage(); } if (strcmp(file, "-") == 0) fp = stdin; else if ((fp = fopen(file, "r")) == NULL) { paxwarn(1, "Unable to open file '%s' for read", file); tar_usage(); } while ((str = get_line(fp)) != NULL) { if (ftree_add(str, 0) < 0) tar_usage(); } if (strcmp(file, "-") != 0) fclose(fp); if (get_line_error) { paxwarn(1, "Problem with file '%s'", file); tar_usage(); } } else if (strcmp(*argv, "-C") == 0) { if (*++argv == NULL) break; if (ftree_add(*argv++, 1) < 0) tar_usage(); } else if (ftree_add(*argv++, 0) < 0) tar_usage(); } /* * no read errors allowed on updates/append operation! */ maxflt = 0; break; } if (!fstdin && ((arcname == NULL) || (*arcname == '\0'))) { arcname = getenv("TAPE"); if ((arcname == NULL) || (*arcname == '\0')) arcname = _PATH_DEFTAPE; } } static int mkpath(char *path) { struct stat sb; char *slash; int done = 0; slash = path; while (!done) { slash += strspn(slash, "/"); slash += strcspn(slash, "/"); done = (*slash == '\0'); *slash = '\0'; if (stat(path, &sb)) { if (errno != ENOENT || mkdir(path, 0777)) { paxwarn(1, "%s", path); return (-1); } } else if (!S_ISDIR(sb.st_mode)) { syswarn(1, ENOTDIR, "%s", path); return (-1); } if (!done) *slash = '/'; } return (0); } /* * cpio_options() * look at the user specified flags. set globals as required and check if * the user specified a legal set of flags. If not, complain and exit */ static void cpio_options(int argc, char **argv) { int c; size_t i; char *str; FSUB tmp; FILE *fp; kflag = 1; pids = 1; pmode = 1; pmtime = 0; arcname = NULL; dflag = 1; act = -1; nodirs = 1; while ((c=getopt(argc,argv,"abcdfiklmoprstuvzABC:E:F:H:I:LO:SZ6")) != -1) switch (c) { case 'a': /* * preserve access time on files read */ tflag = 1; break; case 'b': /* * swap bytes and half-words when reading data */ break; case 'c': /* * ASCII cpio header */ frmt = &(fsub[F_ACPIO]); break; case 'd': /* * create directories as needed */ nodirs = 0; break; case 'f': /* * invert meaning of pattern list */ cflag = 1; break; case 'i': /* * restore an archive */ act = EXTRACT; break; case 'k': break; case 'l': /* * use links instead of copies when possible */ lflag = 1; break; case 'm': /* * preserve modification time */ pmtime = 1; break; case 'o': /* * create an archive */ act = ARCHIVE; frmt = &(fsub[F_CPIO]); break; case 'p': /* * copy-pass mode */ act = COPY; break; case 'r': /* * interactively rename files */ iflag = 1; break; case 's': /* * swap bytes after reading data */ break; case 't': /* * list contents of archive */ act = LIST; listf = stdout; break; case 'u': /* * replace newer files */ kflag = 0; break; case 'v': /* * verbose operation mode */ vflag = 1; break; case 'z': /* * use gzip. Non standard option. */ gzip_program = GZIP_CMD; break; case 'A': /* * append mode */ act = APPND; break; case 'B': /* * Use 5120 byte block size */ wrblksz = 5120; break; case 'C': /* * set block size in bytes */ wrblksz = atoi(optarg); break; case 'E': /* * file with patterns to extract or list */ if ((fp = fopen(optarg, "r")) == NULL) { paxwarn(1, "Unable to open file '%s' for read", optarg); cpio_usage(); } while ((str = get_line(fp)) != NULL) { pat_add(str, NULL); } fclose(fp); if (get_line_error) { paxwarn(1, "Problem with file '%s'", optarg); cpio_usage(); } break; case 'F': case 'I': case 'O': /* * filename where the archive is stored */ if ((optarg[0] == '-') && (optarg[1]== '\0')) { /* * treat a - as stdin */ arcname = NULL; break; } arcname = optarg; break; case 'H': /* * specify an archive format on write */ tmp.name = optarg; if ((frmt = (FSUB *)bsearch((void *)&tmp, (void *)fsub, sizeof(fsub)/sizeof(FSUB), sizeof(FSUB), c_frmt)) != NULL) break; paxwarn(1, "Unknown -H format: %s", optarg); (void)fputs("cpio: Known -H formats are:", stderr); for (i = 0; i < (sizeof(fsub)/sizeof(FSUB)); ++i) (void)fprintf(stderr, " %s", fsub[i].name); (void)fputs("\n\n", stderr); cpio_usage(); break; case 'L': /* * follow symbolic links */ Lflag = 1; break; case 'S': /* * swap halfwords after reading data */ break; case 'Z': /* * use compress. Non standard option. */ gzip_program = COMPRESS_CMD; break; case '6': /* * process Version 6 cpio format */ frmt = &(fsub[F_OCPIO]); break; case '?': default: cpio_usage(); break; } argc -= optind; argv += optind; /* * process the args as they are interpreted by the operation mode */ switch (act) { case LIST: case EXTRACT: while (*argv != NULL) if (pat_add(*argv++, NULL) < 0) cpio_usage(); break; case COPY: if (*argv == NULL) { paxwarn(0, "Destination directory was not supplied"); cpio_usage(); } dirptr = *argv; if (mkpath(dirptr) < 0) cpio_usage(); --argc; ++argv; /* FALLTHROUGH */ case ARCHIVE: case APPND: if (*argv != NULL) cpio_usage(); /* * no read errors allowed on updates/append operation! */ maxflt = 0; while ((str = get_line(stdin)) != NULL) { ftree_add(str, 0); } if (get_line_error) { paxwarn(1, "Problem while reading stdin"); cpio_usage(); } break; default: cpio_usage(); break; } } /* * printflg() * print out those invalid flag sets found to the user */ static void printflg(unsigned int flg) { int nxt; int pos = 0; (void)fprintf(stderr,"%s: Invalid combination of options:", argv0); while ((nxt = ffs(flg)) != 0) { flg = flg >> nxt; pos += nxt; (void)fprintf(stderr, " -%c", flgch[pos-1]); } (void)putc('\n', stderr); } /* * c_frmt() * comparison routine used by bsearch to find the format specified * by the user */ static int c_frmt(const void *a, const void *b) { return(strcmp(((const FSUB *)a)->name, ((const FSUB *)b)->name)); } /* * opt_next() * called by format specific options routines to get each format specific * flag and value specified with -o * Return: * pointer to next OPLIST entry or NULL (end of list). */ OPLIST * opt_next(void) { OPLIST *opt; if ((opt = ophead) != NULL) ophead = ophead->fow; return(opt); } /* * bad_opt() * generic routine used to complain about a format specific options * when the format does not support options. */ int bad_opt(void) { OPLIST *opt; if (ophead == NULL) return(0); /* * print all we were given */ paxwarn(1,"These format options are not supported"); while ((opt = opt_next()) != NULL) (void)fprintf(stderr, "\t%s = %s\n", opt->name, opt->value); pax_usage(); return(0); } /* * opt_add() * breaks the value supplied to -o into an option name and value. Options * are given to -o in the form -o name-value,name=value * multiple -o may be specified. * Return: * 0 if format in name=value format, -1 if -o is passed junk. */ int opt_add(const char *str) { OPLIST *opt; char *frpt; char *pt; char *endpt; char *lstr; if ((str == NULL) || (*str == '\0')) { paxwarn(0, "Invalid option name"); return(-1); } if ((lstr = strdup(str)) == NULL) { paxwarn(0, "Unable to allocate space for option list"); return(-1); } frpt = endpt = lstr; /* * break into name and values pieces and stuff each one into a * OPLIST structure. When we know the format, the format specific * option function will go through this list */ while ((frpt != NULL) && (*frpt != '\0')) { if ((endpt = strchr(frpt, ',')) != NULL) *endpt = '\0'; if ((pt = strchr(frpt, '=')) == NULL) { paxwarn(0, "Invalid options format"); free(lstr); return(-1); } if ((opt = (OPLIST *)malloc(sizeof(OPLIST))) == NULL) { paxwarn(0, "Unable to allocate space for option list"); free(lstr); return(-1); } lstr = NULL; /* parts of string going onto the OPLIST */ *pt++ = '\0'; opt->name = frpt; opt->value = pt; opt->fow = NULL; if (endpt != NULL) frpt = endpt + 1; else frpt = NULL; if (ophead == NULL) { optail = ophead = opt; continue; } optail->fow = opt; optail = opt; } free(lstr); return(0); } /* * str_offt() * Convert an expression of the following forms to an off_t > 0. * 1) A positive decimal number. * 2) A positive decimal number followed by a b (mult by 512). * 3) A positive decimal number followed by a k (mult by 1024). * 4) A positive decimal number followed by a m (mult by 512). * 5) A positive decimal number followed by a w (mult by sizeof int) * 6) Two or more positive decimal numbers (with/without k,b or w). * separated by x (also * for backwards compatibility), specifying * the product of the indicated values. * Return: * 0 for an error, a positive value o.w. */ static off_t str_offt(char *val) { char *expr; off_t num, t; num = strtoq(val, &expr, 0); if ((num == QUAD_MAX) || (num <= 0) || (expr == val)) return(0); switch(*expr) { case 'b': t = num; num *= 512; if (t > num) return(0); ++expr; break; case 'k': t = num; num *= 1024; if (t > num) return(0); ++expr; break; case 'm': t = num; num *= 1048576; if (t > num) return(0); ++expr; break; case 'w': t = num; num *= sizeof(int); if (t > num) return(0); ++expr; break; } switch(*expr) { case '\0': break; case '*': case 'x': t = num; num *= str_offt(expr + 1); if (t > num) return(0); break; default: return(0); } return(num); } char * get_line(FILE *f) { char *name, *temp; size_t len; name = fgetln(f, &len); if (!name) { get_line_error = ferror(f) ? GETLINE_FILE_CORRUPT : 0; return(0); } if (name[len-1] != '\n') len++; temp = malloc(len); if (!temp) { get_line_error = GETLINE_OUT_OF_MEM; return(0); } memcpy(temp, name, len-1); temp[len-1] = 0; return(temp); } /* * no_op() * for those option functions where the archive format has nothing to do. * Return: * 0 */ static int no_op(void) { return(0); } /* * pax_usage() * print the usage summary to the user */ void pax_usage(void) { (void)fputs("usage: pax [-cdnOvz] [-E limit] [-f archive] ", stderr); (void)fputs("[-s replstr] ... [-U user] ...", stderr); (void)fputs("\n [-G group] ... ", stderr); (void)fputs("[-T [from_date][,to_date]] ... ", stderr); (void)fputs("[pattern ...]\n", stderr); (void)fputs(" pax -r [-cdiknOuvzDYZ] [-E limit] ", stderr); (void)fputs("[-f archive] [-o options] ... \n", stderr); (void)fputs(" [-p string] ... [-s replstr] ... ", stderr); (void)fputs("[-U user] ... [-G group] ...\n ", stderr); (void)fputs("[-T [from_date][,to_date]] ... ", stderr); (void)fputs(" [pattern ...]\n", stderr); (void)fputs(" pax -w [-dituvzHLOPX] [-b blocksize] ", stderr); (void)fputs("[ [-a] [-f archive] ] [-x format] \n", stderr); (void)fputs(" [-B bytes] [-s replstr] ... ", stderr); (void)fputs("[-o options] ... [-U user] ...", stderr); (void)fputs("\n [-G group] ... ", stderr); (void)fputs("[-T [from_date][,to_date][/[c][m]]] ... ", stderr); (void)fputs("[file ...]\n", stderr); (void)fputs(" pax -r -w [-diklntuvDHLOPXYZ] ", stderr); (void)fputs("[-p string] ... [-s replstr] ...", stderr); (void)fputs("\n [-U user] ... [-G group] ... ", stderr); (void)fputs("[-T [from_date][,to_date][/[c][m]]] ... ", stderr); (void)fputs("\n [file ...] directory\n", stderr); exit(1); } /* * tar_usage() * print the usage summary to the user */ void tar_usage(void) { (void)fputs("usage: tar [-]{crtux}[-befhjmopqsvwyzHLOPXZ014578] [blocksize] ", stderr); (void)fputs("[archive] [replstr] [-C directory] [-I file] [file ...]\n", stderr); exit(1); } /* * cpio_usage() * print the usage summary to the user */ void cpio_usage(void) { (void)fputs("usage: cpio -o [-aABcLvVzZ] [-C bytes] [-H format] [-O archive]\n", stderr); (void)fputs(" [-F archive] < name-list [> archive]\n", stderr); (void)fputs(" cpio -i [-bBcdfmnrsStuvVzZ6] [-C bytes] [-E file] [-H format]\n", stderr); (void)fputs(" [-I archive] [-F archive] [pattern...] [< archive]\n", stderr); (void)fputs(" cpio -p [-adlLmuvV] destination-directory < name-list\n", stderr); exit(1); }