Lines Matching +full:can +full:- +full:clock +full:- +full:select

1 # SPDX-License-Identifier: GPL-2.0-only
25 	select MII
30 	  in the format 123456-001 (six digits hyphen three digits).
33 	  can be located at:
51 	  to the Adapter & Driver ID Guide that can be located at:
62 	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
65 	select CRC32
67 	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
68 	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
71 	  can be located at:
82 	bool "Support HW cross-timestamp on PCH devices"
86 	 Say Y to enable hardware supported cross-timestamping on PCH
87 	 devices. The cross-timestamp is available through the PTP clock
88 	 driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE).
91 	tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
94 	select I2C
95 	select I2C_ALGOBIT
99 	  to the Adapter & Driver ID Guide that can be located at:
110 	bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
135 	  Driver ID Guide that can be located at:
149 	select LIBIE_FWLOG if DEBUG_FS
150 	select MDIO
151 	select NET_DEVLINK
152 	select PLDMFW
153 	select PHYLIB
157 	  to the Adapter & Driver ID Guide that can be located at:
195 	bool "IPSec XFRM cryptography-offload acceleration"
199 	select XFRM_ALGO
209 	  adapter, go to the Adapter & Driver ID Guide that can be located at:
217 	  will be called ixgbevf.  MSI-X interrupt support is required
221 	bool "IPSec XFRM cryptography-offload acceleration"
225 	select XFRM_ALGO
233 	select AUXILIARY_BUS
234 	select LIBIE
235 	select LIBIE_ADMINQ
236 	select NET_DEVLINK
240 	  to the Adapter & Driver ID Guide that can be located at:
260 # this is here to allow seamless migration from I40EVF --> IAVF name
264 	select LIBIE
265 	select LIBIE_ADMINQ
266 	select NET_SHAPER
270 	select IAVF
278 	  & Driver ID Guide that can be located at:
288 	  will be called iavf.  MSI-X interrupt support is required
297 	select AUXILIARY_BUS
298 	select DIMLIB
299 	select LIBETH_XDP
300 	select LIBIE
301 	select LIBIE_ADMINQ
302 	select LIBIE_FWLOG if DEBUG_FS
303 	select NET_DEVLINK
304 	select PACKING
305 	select PLDMFW
306 	select DPLL
310 	  to the Adapter & Driver ID Guide that can be located at:
346 	bool "Support HW cross-timestamp on platforms with PTM support"
350 	  Say Y to enable hardware supported cross-timestamping on platforms
351 	  with PCIe PTM support. The cross-timestamp is available through
352 	  the PTP clock driver precise cross-timestamp ioctl
363 	  go to the Adapter & Driver ID Guide that can be located at:
371 	  will be called fm10k.  MSI-X interrupt support is required
374 	tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
380 	  This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
384 	  to the Adapter & Driver ID Guide that can be located at: