Lines Matching +full:avdd +full:- +full:usb +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/thermal/thermal.h>
14 stdout-path = "serial0:115200n8";
20 * missing a unit-address. However, the bootloader on these Chromebook
22 * Adding the unit-address causes the bootloader to create a /memory
34 /delete-node/ memory@80000000;
40 vdd-supply = <&vdd_3v3_hdmi>;
41 pll-supply = <&vdd_hdmi_pll>;
42 hdmi-supply = <&vdd_5v0_hdmi>;
44 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
45 nvidia,hpd-gpio =
52 avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
53 vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>;
60 vdd-supply = <&vdd_3v3_panel>;
68 vdd-supply = <&vdd_gpu>;
73 /delete-property/ dmas;
74 /delete-property/ dma-names;
84 clock-frequency = <100000>;
86 acodec: audio-codec@10 {
89 interrupt-parent = <&gpio>;
93 tmp451: temperature-sensor@4c {
96 interrupt-parent = <&gpio>;
99 #thermal-sensor-cells = <1>;
105 clock-frequency = <100000>;
110 interrupt-parent = <&gpio>;
112 wakeup-source;
118 clock-frequency = <400000>;
128 clock-frequency = <100000>;
133 clock-frequency = <400000>;
140 ams,system-power-controller;
142 #interrupt-cells = <2>;
143 interrupt-controller;
145 gpio-controller;
146 #gpio-cells = <2>;
148 pinctrl-names = "default";
149 pinctrl-0 = <&as3722_default>;
155 bias-pull-down;
161 bias-pull-up;
167 bias-pull-up;
172 bias-high-impedance;
177 function = "clk32k-out";
178 bias-pull-down;
183 vsup-sd2-supply = <&vdd_5v0_sys>;
184 vsup-sd3-supply = <&vdd_5v0_sys>;
185 vsup-sd4-supply = <&vdd_5v0_sys>;
186 vsup-sd5-supply = <&vdd_5v0_sys>;
187 vin-ldo0-supply = <&vdd_1v35_lp0>;
188 vin-ldo1-6-supply = <&vdd_3v3_run>;
189 vin-ldo2-5-7-supply = <&vddio_1v8>;
190 vin-ldo3-4-supply = <&vdd_3v3_sys>;
191 vin-ldo9-10-supply = <&vdd_5v0_sys>;
192 vin-ldo11-supply = <&vdd_3v3_run>;
195 regulator-name = "+VDD_CPU_AP";
196 regulator-min-microvolt = <700000>;
197 regulator-max-microvolt = <1350000>;
198 regulator-min-microamp = <3500000>;
199 regulator-max-microamp = <3500000>;
200 regulator-always-on;
201 regulator-boot-on;
202 ams,ext-control = <2>;
206 regulator-name = "+VDD_CORE";
207 regulator-min-microvolt = <700000>;
208 regulator-max-microvolt = <1350000>;
209 regulator-min-microamp = <2500000>;
210 regulator-max-microamp = <4000000>;
211 regulator-always-on;
212 regulator-boot-on;
213 ams,ext-control = <1>;
217 regulator-name = "+1.35V_LP0(sd2)";
218 regulator-min-microvolt = <1350000>;
219 regulator-max-microvolt = <1350000>;
220 regulator-always-on;
221 regulator-boot-on;
225 regulator-name = "+1.35V_LP0(sd3)";
226 regulator-min-microvolt = <1350000>;
227 regulator-max-microvolt = <1350000>;
228 regulator-always-on;
229 regulator-boot-on;
233 regulator-name = "+1.05V_RUN";
234 regulator-min-microvolt = <1050000>;
235 regulator-max-microvolt = <1050000>;
239 regulator-name = "+1.8V_VDDIO";
240 regulator-min-microvolt = <1800000>;
241 regulator-max-microvolt = <1800000>;
242 regulator-always-on;
246 regulator-name = "+VDD_GPU_AP";
247 regulator-min-microvolt = <650000>;
248 regulator-max-microvolt = <1200000>;
249 regulator-min-microamp = <3500000>;
250 regulator-max-microamp = <3500000>;
251 regulator-boot-on;
252 regulator-always-on;
256 regulator-name = "+1.05V_RUN_AVDD";
257 regulator-min-microvolt = <1050000>;
258 regulator-max-microvolt = <1050000>;
259 regulator-boot-on;
260 regulator-always-on;
261 ams,ext-control = <1>;
265 regulator-name = "+1.8V_RUN_CAM";
266 regulator-min-microvolt = <1800000>;
267 regulator-max-microvolt = <1800000>;
271 regulator-name = "+1.2V_GEN_AVDD";
272 regulator-min-microvolt = <1200000>;
273 regulator-max-microvolt = <1200000>;
274 regulator-boot-on;
275 regulator-always-on;
279 regulator-name = "+1.00V_LP0_VDD_RTC";
280 regulator-min-microvolt = <1000000>;
281 regulator-max-microvolt = <1000000>;
282 regulator-boot-on;
283 regulator-always-on;
284 ams,enable-tracking;
288 regulator-name = "+3.3V_RUN_CAM";
289 regulator-min-microvolt = <2800000>;
290 regulator-max-microvolt = <2800000>;
294 regulator-name = "+1.2V_RUN_CAM_FRONT";
295 regulator-min-microvolt = <1200000>;
296 regulator-max-microvolt = <1200000>;
300 regulator-name = "+VDDIO_SDMMC3";
301 regulator-min-microvolt = <1800000>;
302 regulator-max-microvolt = <3300000>;
306 regulator-name = "+1.05V_RUN_CAM_REAR";
307 regulator-min-microvolt = <1050000>;
308 regulator-max-microvolt = <1050000>;
312 regulator-name = "+2.8V_RUN_TOUCH";
313 regulator-min-microvolt = <2800000>;
314 regulator-max-microvolt = <2800000>;
318 regulator-name = "+2.8V_RUN_CAM_AF";
319 regulator-min-microvolt = <2800000>;
320 regulator-max-microvolt = <2800000>;
324 regulator-name = "+1.8V_RUN_VPP_FUSE";
325 regulator-min-microvolt = <1800000>;
326 regulator-max-microvolt = <1800000>;
335 cros_ec: cros-ec@0 {
336 compatible = "google,cros-ec-spi";
337 spi-max-frequency = <3000000>;
338 interrupt-parent = <&gpio>;
341 wakeup-source;
343 google,cros-ec-spi-msg-delay = <2000>;
345 i2c-tunnel {
346 compatible = "google,cros-ec-i2c-tunnel";
347 #address-cells = <1>;
348 #size-cells = <0>;
350 google,remote-bus = <0>;
355 interrupt-parent = <&gpio>;
358 ti,ac-detect-gpios = <&gpio
361 ti,external-control;
364 battery: sbs-battery@b {
365 compatible = "sbs,sbs-battery";
367 sbs,i2c-retry-count = <2>;
368 sbs,poll-retry-count = <10>;
369 power-supplies = <&charger>;
377 spi-max-frequency = <25000000>;
380 compatible = "winbond,w25q32dw", "jedec,spi-nor";
381 spi-max-frequency = <25000000>;
387 nvidia,invert-interrupt;
388 nvidia,suspend-mode = <0>;
389 nvidia,cpu-pwr-good-time = <500>;
390 nvidia,cpu-pwr-off-time = <300>;
391 nvidia,core-pwr-good-time = <641 3845>;
392 nvidia,core-pwr-off-time = <61036>;
393 nvidia,core-power-req-active-high;
394 nvidia,sys-clock-req-active-high;
405 usb@70090000 {
406 phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
407 <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
408 <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
409 <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
410 <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
411 phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
413 avddio-pex-supply = <&vdd_1v05_run>;
414 dvddio-pex-supply = <&vdd_1v05_run>;
415 avdd-usb-supply = <&vdd_3v3_lp0>;
416 avdd-pll-utmip-supply = <&vddio_1v8>;
417 avdd-pll-erefe-supply = <&avdd_1v05_run>;
418 avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
419 hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
420 hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
428 avdd-pll-utmip-supply = <&vddio_1v8>;
429 avdd-pll-erefe-supply = <&avdd_1v05_run>;
430 avdd-pex-pll-supply = <&vdd_1v05_run>;
431 hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
438 usb2-0 {
443 usb2-1 {
448 usb2-2 {
459 pcie-0 {
460 nvidia,function = "usb3-ss";
464 pcie-1 {
465 nvidia,function = "usb3-ss";
473 usb2-0 {
474 vbus-supply = <&vdd_usb1_vbus>;
477 usb-role-switch;
480 usb2-1 {
481 vbus-supply = <&vdd_run_cam>;
486 usb2-2 {
487 vbus-supply = <&vdd_usb3_vbus>;
492 usb3-0 {
493 nvidia,usb2-companion = <0>;
497 usb3-1 {
498 nvidia,usb2-companion = <1>;
506 bus-width = <4>;
507 no-1-8-v;
508 non-removable;
509 mmc-pwrseq = <&sdhci0_pwrseq>;
510 vmmc-supply = <&vdd_3v3_lp0>;
511 vqmmc-supply = <&vddio_1v8>;
512 keep-power-in-suspend;
517 cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
518 power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
519 bus-width = <4>;
520 no-1-8-v;
521 vqmmc-supply = <&vddio_sdmmc3>;
526 bus-width = <8>;
527 no-1-8-v;
528 non-removable;
534 vdd-cpu-supply = <&vdd_cpu>;
535 nvidia,i2c-fs-rate = <400000>;
545 compatible = "pwm-backlight";
547 enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
548 power-supply = <&vdd_led>;
551 default-brightness-level = <224>;
552 brightness-levels =
588 clk32k_in: clock-32k {
589 compatible = "fixed-clock";
590 clock-frequency = <32768>;
591 #clock-cells = <0>;
596 #cooling-cells = <2>;
597 vdd-cpu-supply = <&vdd_cpu>;
601 #cooling-cells = <2>;
605 #cooling-cells = <2>;
609 #cooling-cells = <2>;
613 gpio-keys {
614 compatible = "gpio-keys";
616 key-power {
620 debounce-interval = <30>;
621 wakeup-source;
624 switch-lid {
627 linux,input-type = <5>;
629 debounce-interval = <1>;
630 wakeup-source;
634 gpio-restart {
635 compatible = "gpio-restart";
640 sdhci0_pwrseq: pwrseq-sdhci0 {
641 compatible = "mmc-pwrseq-simple";
643 reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
646 vdd_mux: regulator-mux {
647 compatible = "regulator-fixed";
648 regulator-name = "+VDD_MUX";
649 regulator-min-microvolt = <12000000>;
650 regulator-max-microvolt = <12000000>;
651 regulator-always-on;
652 regulator-boot-on;
655 vdd_5v0_sys: regulator-5v0sys {
656 compatible = "regulator-fixed";
657 regulator-name = "+5V_SYS";
658 regulator-min-microvolt = <5000000>;
659 regulator-max-microvolt = <5000000>;
660 regulator-always-on;
661 regulator-boot-on;
662 vin-supply = <&vdd_mux>;
665 vdd_3v3_sys: regulator-3v3sys {
666 compatible = "regulator-fixed";
667 regulator-name = "+3.3V_SYS";
668 regulator-min-microvolt = <3300000>;
669 regulator-max-microvolt = <3300000>;
670 regulator-always-on;
671 regulator-boot-on;
672 vin-supply = <&vdd_mux>;
675 vdd_3v3_run: regulator-3v3run {
676 compatible = "regulator-fixed";
677 regulator-name = "+3.3V_RUN";
678 regulator-min-microvolt = <3300000>;
679 regulator-max-microvolt = <3300000>;
680 regulator-always-on;
681 regulator-boot-on;
683 enable-active-high;
684 vin-supply = <&vdd_3v3_sys>;
687 vdd_3v3_hdmi: regulator-3v3hdmi {
688 compatible = "regulator-fixed";
689 regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
690 regulator-min-microvolt = <3300000>;
691 regulator-max-microvolt = <3300000>;
692 vin-supply = <&vdd_3v3_run>;
695 vdd_led: regulator-led {
696 compatible = "regulator-fixed";
697 regulator-name = "+VDD_LED";
699 enable-active-high;
700 vin-supply = <&vdd_mux>;
703 vdd_5v0_ts: regulator-ts {
704 compatible = "regulator-fixed";
705 regulator-name = "+5V_VDD_TS_SW";
706 regulator-min-microvolt = <5000000>;
707 regulator-max-microvolt = <5000000>;
708 regulator-boot-on;
710 enable-active-high;
711 vin-supply = <&vdd_5v0_sys>;
714 vdd_usb1_vbus: regulator-usb1 {
715 compatible = "regulator-fixed";
716 regulator-name = "+5V_USB_HS";
717 regulator-min-microvolt = <5000000>;
718 regulator-max-microvolt = <5000000>;
720 enable-active-high;
721 gpio-open-drain;
722 vin-supply = <&vdd_5v0_sys>;
725 vdd_usb3_vbus: regulator-usb3 {
726 compatible = "regulator-fixed";
727 regulator-name = "+5V_USB_SS";
728 regulator-min-microvolt = <5000000>;
729 regulator-max-microvolt = <5000000>;
731 enable-active-high;
732 gpio-open-drain;
733 vin-supply = <&vdd_5v0_sys>;
736 vdd_3v3_panel: regulator-panel {
737 compatible = "regulator-fixed";
738 regulator-name = "+3.3V_PANEL";
739 regulator-min-microvolt = <3300000>;
740 regulator-max-microvolt = <3300000>;
742 enable-active-high;
743 vin-supply = <&vdd_3v3_run>;
746 vdd_3v3_lp0: regulator-lp0 {
747 compatible = "regulator-fixed";
748 regulator-name = "+3.3V_LP0";
749 regulator-min-microvolt = <3300000>;
750 regulator-max-microvolt = <3300000>;
752 * TODO: find a way to wire this up with the USB EHCI
755 regulator-always-on;
757 enable-active-high;
758 vin-supply = <&vdd_3v3_sys>;
761 vdd_hdmi_pll: regulator-hdmipll {
762 compatible = "regulator-fixed";
763 regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
764 regulator-min-microvolt = <1050000>;
765 regulator-max-microvolt = <1050000>;
767 vin-supply = <&vdd_1v05_run>;
770 vdd_5v0_hdmi: regulator-hdmicon {
771 compatible = "regulator-fixed";
772 regulator-name = "+5V_HDMI_CON";
773 regulator-min-microvolt = <5000000>;
774 regulator-max-microvolt = <5000000>;
776 enable-active-high;
777 vin-supply = <&vdd_5v0_sys>;
781 nvidia,audio-routing =
791 nvidia,i2s-controller = <&tegra_i2s1>;
792 nvidia,audio-codec = <&acodec>;
797 clock-names = "pll_a", "pll_a_out0", "mclk";
799 assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
802 assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
805 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
806 nvidia,mic-det-gpios =
810 thermal-zones {
811 cpu-skin-thermal {
812 polling-delay-passive = <1000>; /* milliseconds */
813 polling-delay = <5000>; /* milliseconds */
815 thermal-sensors = <&tmp451 0>;
818 cpu_passive_trip: cpu-alert0 {
826 cooling-maps {
829 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
839 #include "../cros-ec-keyboard.dtsi"