Lines Matching +full:3 +full:- +full:line
1 // SPDX-License-Identifier: GPL-2.0+
5 * Copyright (C) 2019-present Lenovo
8 /dts-v1/;
10 #include "aspeed-g5.dtsi"
11 #include <dt-bindings/gpio/aspeed-gpio.h>
15 compatible = "lenovo,hr630-bmc", "aspeed,ast2500";
29 stdout-path = &uart5;
38 reserved-memory {
39 #address-cells = <1>;
40 #size-cells = <1>;
44 no-map;
51 compatible = "shared-dma-pool";
57 compatible = "gpio-leds";
68 iio-hwmon {
69 compatible = "iio-hwmon";
70 io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
82 m25p,fast-read;
84 spi-max-frequency = <50000000>;
85 #include "openbmc-flash-layout.dtsi"
91 memory-region = <&flash_memory>;
97 pinctrl-names = "default";
98 pinctrl-0 = <&pinctrl_txd1_default
103 /* Rear RS-232 connector */
105 pinctrl-names = "default";
106 pinctrl-0 = <&pinctrl_txd2_default
118 pinctrl-names = "default";
119 pinctrl-0 = <&pinctrl_txd3_default
134 pinctrl-names = "default";
135 pinctrl-0 = <&pinctrl_rmii1_default>;
138 clock-names = "MACCLK", "RCLK";
139 use-ncsi;
145 pinctrl-names = "default";
146 pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
152 pinctrl-names = "default";
153 pinctrl-0 = <&pinctrl_adc0_default
208 * Slot 3
211 i2c-mux@70 {
214 #address-cells = <1>;
215 #size-cells = <0>;
216 i2c-mux-idle-disconnect; /* may use mux@70 next. */
219 #address-cells = <1>;
220 #size-cells = <0>;
225 #address-cells = <1>;
226 #size-cells = <0>;
231 #address-cells = <1>;
232 #size-cells = <0>;
236 i2c_fbp3: i2c@3 {
237 #address-cells = <1>;
238 #size-cells = <0>;
239 reg = <3>;
250 * Slot 3
252 i2c-mux@76 {
255 #address-cells = <1>;
256 #size-cells = <0>;
257 i2c-mux-idle-disconnect; /* may use mux@76 next. */
260 #address-cells = <1>;
261 #size-cells = <0>;
266 #address-cells = <1>;
267 #size-cells = <0>;
272 #address-cells = <1>;
273 #size-cells = <0>;
277 i2c_ocp: i2c@3 {
278 #address-cells = <1>;
279 #size-cells = <0>;
280 reg = <3>;
321 memory-region = <&gfx_memory>;
326 pinctrl-names = "default";
327 pinctrl-0 = <&pinctrl_pwm0_default
337 aspeed,fan-tach-ch = /bits/ 8 <0x00>;
342 aspeed,fan-tach-ch = /bits/ 8 <0x01>;
347 aspeed,fan-tach-ch = /bits/ 8 <0x02>;
350 fan@3 {
352 aspeed,fan-tach-ch = /bits/ 8 <0x03>;
357 aspeed,fan-tach-ch = /bits/ 8 <0x04>;
362 aspeed,fan-tach-ch = /bits/ 8 <0x05>;
367 aspeed,fan-tach-ch = /bits/ 8 <0x06>;
372 aspeed,fan-tach-ch = /bits/ 8 <0x07>;
377 aspeed,fan-tach-ch = /bits/ 8 <0x08>;
382 aspeed,fan-tach-ch = /bits/ 8 <0x09>;
387 aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
392 aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
397 aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
402 aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
409 gpio-hog;
411 output-high;
412 line-name = "IRQ_BMC_PCH_SMI_LPC_N";
416 gpio-hog;
418 output-low;
419 line-name = "IRQ_BMC_PCH_NMI_R";
423 gpio-hog;
424 gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
425 output-high;
426 line-name = "I2C_BUS0_RST_OUT_N";
430 gpio-hog;
432 output-low;
433 line-name = "FM_SKT0_FAULT_LED";
437 gpio-hog;
439 output-low;
440 line-name = "FM_SKT1_FAULT_LED";
444 gpio-hog;
446 output-high;
447 line-name = "FAN_PWR_CTL_N";
451 gpio-hog;
453 output-high;
454 line-name = "RST_BMC_PCIE_I2CMUX_N";
458 gpio-hog;
460 output-high;
461 line-name = "PSU1_FFS_N_R";
465 gpio-hog;
466 gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
467 output-high;
468 line-name = "PSU2_FFS_N_R";
472 gpio-hog;
473 gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
474 output-high;
475 line-name = "BMC_INTRUDED_COVER";
479 gpio-hog;
481 output-high;
482 line-name = "BMC_BIOS_UPDATE_N";
486 gpio-hog;
487 gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
488 output-high;
489 line-name = "RST_BMC_HDD_I2CMUX_N";
493 gpio-hog;
495 output-high;
496 line-name = "BMC_VGA_SW";
500 gpio-hog;
503 line-name = "VBAT_EN_N";
507 gpio-hog;
509 output-high;
510 line-name = "PU_BMC_GPIOS6";
514 gpio-hog;
516 output-low;
517 line-name = "BMC_NCSI_MUX_CTL_S0";
521 gpio-hog;
523 output-low;
524 line-name = "BMC_NCSI_MUX_CTL_S1";
528 gpio-hog;
530 output-high;
531 line-name = "I2C_RISER2_INT_N";
535 gpio-hog;
537 output-high;
538 line-name = "I2C_RISER2_RESET_N";
542 gpio-hog;
543 gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
544 output-high;
545 line-name = "FM_BMC_PCH_SCI_LPC_N";
549 gpio-hog;
551 output-low;
552 line-name = "BMC_POST_CMPLT_N";
556 gpio-hog;
558 output-low;
559 line-name = "HOST_BMC_USB_SEL";
563 gpio-hog;
565 output-high;
566 line-name = "I2C_BUS1_RST_OUT_N";