Lines Matching +full:termination +full:- +full:current
1 # SPDX-License-Identifier: GPL-2.0
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Bq24250, bq24251 and bq24257 Li-Ion Charger
11 - Sebastian Reichel <sre@kernel.org>
14 - $ref: power-supply.yaml#
19 - ti,bq24250
20 - ti,bq24251
21 - ti,bq24257
29 ti,battery-regulation-voltage:
33 ti,charge-current:
35 description: maximum charging current in uA
37 ti,termination-current:
40 charge will be terminated when current in constant-voltage phase
43 pg-gpios:
48 state. If this pin is not specified a software-based approach for PG
52 ti,current-limit:
55 The maximum current to be drawn from the charger's input (in uA).
56 If this property is not specified, the input limit current is set
57 automatically using USB D+/D- signal based charger type detection.
58 If the hardware does not support the D+/D- based detection, a default
61 ti,ovp-voltage:
67 ti,in-dpm-voltage:
74 - compatible
75 - reg
76 - interrupts
77 - ti,battery-regulation-voltage
78 - ti,charge-current
79 - ti,termination-current
84 - |
85 #include <dt-bindings/gpio/gpio.h>
86 #include <dt-bindings/interrupt-controller/irq.h>
88 #address-cells = <1>;
89 #size-cells = <0>;
94 interrupt-parent = <&gpio1>;
97 pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
99 ti,battery-regulation-voltage = <4200000>;
100 ti,charge-current = <1000000>;
101 ti,termination-current = <50000>;
104 - |
105 #include <dt-bindings/gpio/gpio.h>
106 #include <dt-bindings/interrupt-controller/irq.h>
108 #address-cells = <1>;
109 #size-cells = <0>;
114 interrupt-parent = <&gpio1>;
117 ti,battery-regulation-voltage = <4200000>;
118 ti,charge-current = <500000>;
119 ti,termination-current = <50000>;
120 ti,current-limit = <900000>;
121 ti,ovp-voltage = <9500000>;
122 ti,in-dpm-voltage = <4440000>;