Lines Matching +full:usb +full:- +full:phy
1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-h3-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner H3 USB PHY
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
19 - allwinner,sun8i-h3-usb-phy
20 - allwinner,sun50i-h616-usb-phy
24 - description: PHY Control registers
25 - description: PHY PMU0 registers
26 - description: PHY PMU1 registers
27 - description: PHY PMU2 registers
28 - description: PHY PMU3 registers
30 reg-names:
32 - const: phy_ctrl
33 - const: pmu0
34 - const: pmu1
35 - const: pmu2
36 - const: pmu3
41 - description: USB OTG PHY bus clock
42 - description: USB Host 0 PHY bus clock
43 - description: USB Host 1 PHY bus clock
44 - description: USB Host 2 PHY bus clock
45 - description: PMU clock for host port 2
47 clock-names:
50 - const: usb0_phy
51 - const: usb1_phy
52 - const: usb2_phy
53 - const: usb3_phy
54 - const: pmu2_clk
58 - description: USB OTG reset
59 - description: USB Host 1 Controller reset
60 - description: USB Host 2 Controller reset
61 - description: USB Host 3 Controller reset
63 reset-names:
65 - const: usb0_reset
66 - const: usb1_reset
67 - const: usb2_reset
68 - const: usb3_reset
70 usb0_id_det-gpios:
72 description: GPIO to the USB OTG ID pin
74 usb0_vbus_det-gpios:
76 description: GPIO to the USB OTG VBUS detect pin
78 usb0_vbus_power-supply:
79 description: Power supply to detect the USB OTG VBUS
81 usb0_vbus-supply:
82 description: Regulator controlling USB OTG VBUS
84 usb1_vbus-supply:
87 usb2_vbus-supply:
90 usb3_vbus-supply:
94 - "#phy-cells"
95 - compatible
96 - clocks
97 - clock-names
98 - reg
99 - reg-names
100 - resets
101 - reset-names
104 - if:
109 - allwinner,sun50i-h616-usb-phy
115 clock-names:
122 clock-names:
128 - |
129 #include <dt-bindings/gpio/gpio.h>
130 #include <dt-bindings/clock/sun8i-h3-ccu.h>
131 #include <dt-bindings/reset/sun8i-h3-ccu.h>
133 phy@1c19400 {
134 #phy-cells = <1>;
135 compatible = "allwinner,sun8i-h3-usb-phy";
141 reg-names = "phy_ctrl",
150 clock-names = "usb0_phy",
158 reset-names = "usb0_reset",
162 usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
163 usb0_vbus-supply = <®_usb0_vbus>;
164 usb1_vbus-supply = <®_usb1_vbus>;
165 usb2_vbus-supply = <®_usb2_vbus>;
166 usb3_vbus-supply = <®_usb3_vbus>;