Lines Matching +full:legacy +full:- +full:interrupt +full:- +full:controller
11 /dts-v1/;
14 #address-cells = <2>;
15 #size-cells = <1>;
18 dcr-parent = <&{/cpus/cpu@0}>;
26 #address-cells = <1>;
27 #size-cells = <0>;
33 clock-frequency = <0>; /* Filled in by U-Boot */
34 timebase-frequency = <0>; /* Filled in by U-Boot */
35 i-cache-line-size = <32>;
36 d-cache-line-size = <32>;
37 i-cache-size = <32768>;
38 d-cache-size = <32768>;
39 dcr-controller;
40 dcr-access-method = "native";
46 reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
49 UIC0: interrupt-controller0 {
50 compatible = "ibm,uic-460sx","ibm,uic";
51 interrupt-controller;
52 cell-index = <0>;
53 dcr-reg = <0x0c0 0x009>;
54 #address-cells = <0>;
55 #size-cells = <0>;
56 #interrupt-cells = <2>;
59 UIC1: interrupt-controller1 {
60 compatible = "ibm,uic-460sx","ibm,uic";
61 interrupt-controller;
62 cell-index = <1>;
63 dcr-reg = <0x0d0 0x009>;
64 #address-cells = <0>;
65 #size-cells = <0>;
66 #interrupt-cells = <2>;
68 interrupt-parent = <&UIC0>;
71 UIC2: interrupt-controller2 {
72 compatible = "ibm,uic-460sx","ibm,uic";
73 interrupt-controller;
74 cell-index = <2>;
75 dcr-reg = <0x0e0 0x009>;
76 #address-cells = <0>;
77 #size-cells = <0>;
78 #interrupt-cells = <2>;
80 interrupt-parent = <&UIC0>;
83 UIC3: interrupt-controller3 {
84 compatible = "ibm,uic-460sx","ibm,uic";
85 interrupt-controller;
86 cell-index = <3>;
87 dcr-reg = <0x0f0 0x009>;
88 #address-cells = <0>;
89 #size-cells = <0>;
90 #interrupt-cells = <2>;
92 interrupt-parent = <&UIC0>;
96 compatible = "ibm,sdr-460sx";
97 dcr-reg = <0x00e 0x002>;
101 compatible = "ibm,cpr-460sx";
102 dcr-reg = <0x00c 0x002>;
106 compatible = "ibm,plb-460sx", "ibm,plb4";
107 #address-cells = <2>;
108 #size-cells = <1>;
110 clock-frequency = <0>; /* Filled in by U-Boot */
113 compatible = "ibm,sdram-460sx", "ibm,sdram-405gp";
114 dcr-reg = <0x010 0x002>;
118 compatible = "ibm,mcmal-460sx", "ibm,mcmal2";
119 dcr-reg = <0x180 0x62>;
120 num-tx-chans = <4>;
121 num-rx-chans = <32>;
122 #address-cells = <1>;
123 #size-cells = <1>;
124 interrupt-parent = <&UIC1>;
141 compatible = "ibm,opb-460sx", "ibm,opb";
142 #address-cells = <1>;
143 #size-cells = <1>;
145 clock-frequency = <0>; /* Filled in by U-Boot */
148 compatible = "ibm,ebc-460sx", "ibm,ebc";
149 dcr-reg = <0x012 0x002>;
150 #address-cells = <2>;
151 #size-cells = <1>;
152 clock-frequency = <0>; /* Filled in by U-Boot */
153 /* ranges property is supplied by U-Boot */
155 interrupt-parent = <&UIC1>;
158 compatible = "amd,s29gl512n", "cfi-flash";
159 bank-width = <2>;
161 #address-cells = <1>;
162 #size-cells = <1>;
188 label = "u-boot";
198 virtual-reg = <0xef600200>;
199 clock-frequency = <0>; /* Filled in by U-Boot */
200 current-speed = <0>; /* Filled in by U-Boot */
201 interrupt-parent = <&UIC0>;
205 RGMII0: emac-rgmii@ef600900 {
206 compatible = "ibm,rgmii-460sx", "ibm,rgmii";
212 compatible = "ibm,emac-460sx", "ibm,emac4";
213 interrupt-parent = <&EMAC0>;
215 #interrupt-cells = <1>;
216 #address-cells = <0>;
217 #size-cells = <0>;
218 interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4
221 local-mac-address = [000000000000]; /* Filled in by U-Boot */
222 mal-device = <&MAL0>;
223 mal-tx-channel = <0>;
224 mal-rx-channel = <0>;
225 cell-index = <0>;
226 max-frame-size = <9000>;
227 rx-fifo-size = <4096>;
228 tx-fifo-size = <2048>;
229 rx-fifo-size-gige = <16384>;
230 phy-mode = "rgmii";
231 phy-map = <0x00000000>;
232 rgmii-device = <&RGMII0>;
233 rgmii-channel = <0>;
234 has-inverted-stacr-oc;
235 has-new-stacr-staopc;
240 #interrupt-cells = <1>;
241 #size-cells = <2>;
242 #address-cells = <3>;
243 compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
248 dcr-reg = <0x100 0x020>;
249 sdr-base = <0x300>;
258 dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
261 bus-range = <0x10 0x1f>;
263 /* Legacy interrupts (note the weird polarity, the bridge seems
264 * to invert PCIe legacy interrupts).
265 * We are de-swizzling here because the numbers are actually for
268 * below are basically de-swizzled numbers.
271 interrupt-map-mask = <0x0 0x0 0x0 0x7>;
272 interrupt-map = <
281 #interrupt-cells = <1>;
282 #size-cells = <2>;
283 #address-cells = <3>;
284 compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
289 dcr-reg = <0x120 0x020>;
290 sdr-base = <0x340>;
299 dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
302 bus-range = <0x20 0x2f>;
304 /* Legacy interrupts (note the weird polarity, the bridge seems
305 * to invert PCIe legacy interrupts).
306 * We are de-swizzling here because the numbers are actually for
309 * below are basically de-swizzled numbers.
312 interrupt-map-mask = <0x0 0x0 0x0 0x7>;
313 interrupt-map = <
322 #interrupt-cells = <1>;
323 #size-cells = <2>;
324 #address-cells = <3>;
325 compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
330 dcr-reg = <0x140 0x020>;
331 sdr-base = <0x370>;
340 dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
343 bus-range = <0x30 0x3f>;
345 /* Legacy interrupts (note the weird polarity, the bridge seems
346 * to invert PCIe legacy interrupts).
347 * We are de-swizzling here because the numbers are actually for
350 * below are basically de-swizzled numbers.
353 interrupt-map-mask = <0x0 0x0 0x0 0x7>;
354 interrupt-map = <
365 stdout-path = "/plb/opb/serial@ef600200";