Lines Matching +full:dvp +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
16 stdout-path = "serial0:115200n8";
19 ext_gmac: gmac-clk {
20 compatible = "fixed-clock";
21 clock-frequency = <125000000>;
22 clock-output-names = "ext_gmac";
23 #clock-cells = <0>;
27 compatible = "i2c-mux-gpio";
28 #address-cells = <1>;
29 #size-cells = <0>;
30 i2c-parent = <&i2c1>;
31 mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
36 #address-cells = <1>;
37 #size-cells = <0>;
43 #address-cells = <1>;
44 #size-cells = <0>;
49 compatible = "i2c-mux-gpio";
50 #address-cells = <1>;
51 #size-cells = <0>;
52 i2c-parent = <&i2c2>;
53 mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
58 #address-cells = <1>;
59 #size-cells = <0>;
64 #cooling-cells = <2>;
76 #address-cells = <1>;
77 #size-cells = <0>;
82 compatible = "gpio-leds";
83 pinctrl-names = "default";
84 pinctrl-0 = <&module_led_pins>;
86 module_led1: led-1 {
89 linux,default-trigger = "heartbeat";
90 panic-indicator;
93 module_led2: led-2 {
96 default-state = "off";
100 vcc_sys: vcc-sys-regulator {
101 compatible = "regulator-fixed";
102 regulator-name = "vcc_sys";
103 regulator-min-microvolt = <5000000>;
104 regulator-max-microvolt = <5000000>;
105 regulator-always-on;
106 regulator-boot-on;
111 cpu-supply = <&vdd_cpu>;
115 cpu-supply = <&vdd_cpu>;
119 cpu-supply = <&vdd_cpu>;
123 cpu-supply = <&vdd_cpu>;
127 cpu-supply = <&vdd_cpu>;
131 cpu-supply = <&vdd_cpu>;
135 cpu-supply = <&vdd_cpu>;
139 cpu-supply = <&vdd_cpu>;
143 bus-width = <8>;
144 clock-frequency = <150000000>;
145 mmc-hs200-1_8v;
146 non-removable;
147 vmmc-supply = <&vcc33_io>;
148 vqmmc-supply = <&vcc_18>;
149 pinctrl-names = "default";
150 pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
155 assigned-clocks = <&cru SCLK_MAC>;
156 assigned-clock-parents = <&ext_gmac>;
158 phy-supply = <&vcc33_io>;
159 phy-mode = "rgmii";
160 pinctrl-names = "default";
161 pinctrl-0 = <&rgmii_pins>;
162 snps,reset-active-low;
163 snps,reset-delays-us = <0 10000 50000>;
164 snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
176 interrupt-parent = <&gpio0>;
178 clock-output-names = "xin32k", "rk808-clkout2";
179 #clock-cells = <1>;
180 pinctrl-names = "default";
181 pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>;
182 rockchip,system-power-controller;
183 vcc1-supply = <&vcc_sys>;
184 vcc2-supply = <&vcc_sys>;
185 vcc3-supply = <&vcc_sys>;
186 vcc4-supply = <&vcc_sys>;
187 vcc6-supply = <&vcc_sys>;
188 vcc7-supply = <&vcc_sys>;
189 vcc8-supply = <&vcc_sys>;
190 vcc9-supply = <&vcc_sys>;
191 vcc10-supply = <&vcc_sys>;
192 vcc11-supply = <&vcc_sys>;
193 vcc12-supply = <&vcc_sys>;
197 regulator-name = "vdd_cpu";
198 regulator-min-microvolt = <700000>;
199 regulator-max-microvolt = <1500000>;
200 regulator-always-on;
201 regulator-boot-on;
205 regulator-name = "vdd_log";
206 regulator-min-microvolt = <700000>;
207 regulator-max-microvolt = <1500000>;
208 regulator-always-on;
209 regulator-boot-on;
213 regulator-name = "vcc_ddr";
214 regulator-always-on;
215 regulator-boot-on;
219 regulator-name = "vcc33_io";
220 regulator-min-microvolt = <3300000>;
221 regulator-max-microvolt = <3300000>;
222 regulator-always-on;
223 regulator-boot-on;
227 regulator-name = "vcc33_video";
228 regulator-min-microvolt = <3300000>;
229 regulator-max-microvolt = <3300000>;
230 regulator-always-on;
231 regulator-boot-on;
235 regulator-name = "vdd10_pll";
236 regulator-min-microvolt = <1000000>;
237 regulator-max-microvolt = <1000000>;
238 regulator-always-on;
239 regulator-boot-on;
243 regulator-name = "vdd10_video";
244 regulator-min-microvolt = <1000000>;
245 regulator-max-microvolt = <1000000>;
246 regulator-always-on;
247 regulator-boot-on;
251 regulator-always-on;
252 regulator-boot-on;
253 regulator-min-microvolt = <1800000>;
254 regulator-max-microvolt = <1800000>;
255 regulator-name = "vcc_18";
259 regulator-name = "vcc18_video";
260 regulator-min-microvolt = <1800000>;
261 regulator-max-microvolt = <1800000>;
262 regulator-always-on;
263 regulator-boot-on;
277 /* The RK3368-uQ7 "Lion" has most IO voltages hardwired to 3.3V. */
279 audio-supply = <&vcc33_io>;
280 dvp-supply = <&vcc33_io>;
281 flash0-supply = <&vcc_18>;
282 gpio30-supply = <&vcc33_io>;
283 gpio1830-supply = <&vcc33_io>;
284 sdcard-supply = <&vcc33_io>;
285 wifi-supply = <&vcc33_io>;
291 module_led_pins: module-led-pins {
298 pmic_int_l: pmic-int-l {
302 pmic_sleep: pmic-sleep {
309 pmu-supply = <&vcc33_io>;
310 vop-supply = <&vcc33_io>;
318 compatible = "jedec,spi-nor";
320 spi-max-frequency = <50000000>;