Lines Matching +full:vdd +full:- +full:l1
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9 #include <dt-bindings/gpio/gpio.h>
16 compatible = "qcom,sa8155p-adp", "qcom,sa8155p";
24 stdout-path = "serial0:115200n8";
27 vreg_3p3: vreg-3p3-regulator {
28 compatible = "regulator-fixed";
29 regulator-name = "vreg_3p3";
30 regulator-min-microvolt = <3300000>;
31 regulator-max-microvolt = <3300000>;
39 compatible = "regulator-fixed";
40 regulator-name = "vreg_s4a_1p8";
42 regulator-min-microvolt = <1800000>;
43 regulator-max-microvolt = <1800000>;
45 regulator-always-on;
46 regulator-boot-on;
48 vin-supply = <&vreg_3p3>;
53 regulators-0 {
54 compatible = "qcom,pmm8155au-rpmh-regulators";
55 qcom,pmic-id = "a";
57 vdd-s1-supply = <&vreg_3p3>;
58 vdd-s2-supply = <&vreg_3p3>;
59 vdd-s3-supply = <&vreg_3p3>;
60 vdd-s4-supply = <&vreg_3p3>;
61 vdd-s5-supply = <&vreg_3p3>;
62 vdd-s6-supply = <&vreg_3p3>;
63 vdd-s7-supply = <&vreg_3p3>;
64 vdd-s8-supply = <&vreg_3p3>;
65 vdd-s9-supply = <&vreg_3p3>;
66 vdd-s10-supply = <&vreg_3p3>;
68 vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>;
69 vdd-l2-l10-supply = <&vreg_3p3>;
70 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>;
71 vdd-l6-l9-supply = <&vreg_s6a_0p92>;
72 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
73 vdd-l13-l16-l17-supply = <&vreg_3p3>;
76 regulator-name = "vreg_s5a_2p04";
77 regulator-min-microvolt = <1904000>;
78 regulator-max-microvolt = <2000000>;
82 regulator-name = "vreg_s6a_0p92";
83 regulator-min-microvolt = <920000>;
84 regulator-max-microvolt = <1128000>;
88 regulator-name = "vreg_l1a_0p752";
89 regulator-min-microvolt = <752000>;
90 regulator-max-microvolt = <752000>;
91 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
96 regulator-name = "vreg_l2a_3p072";
97 regulator-min-microvolt = <3072000>;
98 regulator-max-microvolt = <3072000>;
99 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
103 regulator-name = "vreg_l3a_0p8";
104 regulator-min-microvolt = <800000>;
105 regulator-max-microvolt = <800000>;
106 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
112 regulator-name = "vreg_l5a_0p88";
113 regulator-min-microvolt = <880000>;
114 regulator-max-microvolt = <880000>;
115 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
116 regulator-allow-set-load;
117 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
122 regulator-name = "vreg_l7a_1p8";
123 regulator-min-microvolt = <1800000>;
124 regulator-max-microvolt = <1800000>;
125 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
129 regulator-name = "vreg_l10a_2p96";
130 regulator-min-microvolt = <2504000>;
131 regulator-max-microvolt = <2960000>;
132 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
133 regulator-allow-set-load;
134 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
139 regulator-name = "vreg_l11a_0p8";
140 regulator-min-microvolt = <800000>;
141 regulator-max-microvolt = <800000>;
142 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
147 regulator-name = "vreg_l12a_1p8";
148 regulator-min-microvolt = <1800000>;
149 regulator-max-microvolt = <1800000>;
150 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
154 regulator-name = "vreg_l13a_2p7";
155 regulator-min-microvolt = <2704000>;
156 regulator-max-microvolt = <2704000>;
157 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
161 regulator-name = "vreg_l15a_1p7";
162 regulator-min-microvolt = <1704000>;
163 regulator-max-microvolt = <1704000>;
164 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
168 regulator-name = "vreg_l16a_2p7";
169 regulator-min-microvolt = <2704000>;
170 regulator-max-microvolt = <2960000>;
171 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
175 regulator-name = "vreg_l17a_2p96";
176 regulator-min-microvolt = <2504000>;
177 regulator-max-microvolt = <2960000>;
178 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
182 regulators-1 {
183 compatible = "qcom,pmm8155au-rpmh-regulators";
184 qcom,pmic-id = "c";
186 vdd-s1-supply = <&vreg_3p3>;
187 vdd-s2-supply = <&vreg_3p3>;
188 vdd-s3-supply = <&vreg_3p3>;
189 vdd-s4-supply = <&vreg_3p3>;
190 vdd-s5-supply = <&vreg_3p3>;
191 vdd-s6-supply = <&vreg_3p3>;
192 vdd-s7-supply = <&vreg_3p3>;
193 vdd-s8-supply = <&vreg_3p3>;
194 vdd-s9-supply = <&vreg_3p3>;
195 vdd-s10-supply = <&vreg_3p3>;
197 vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>;
198 vdd-l2-l10-supply = <&vreg_3p3>;
199 vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>;
200 vdd-l6-l9-supply = <&vreg_s6c_1p128>;
201 vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>;
202 vdd-l13-l16-l17-supply = <&vreg_3p3>;
205 regulator-name = "vreg_s4c_1p352";
206 regulator-min-microvolt = <1352000>;
207 regulator-max-microvolt = <1352000>;
211 regulator-name = "vreg_s5c_2p04";
212 regulator-min-microvolt = <1904000>;
213 regulator-max-microvolt = <2000000>;
217 regulator-name = "vreg_s6c_1p128";
218 regulator-min-microvolt = <1128000>;
219 regulator-max-microvolt = <1128000>;
223 regulator-name = "vreg_l1c_1p304";
224 regulator-min-microvolt = <1304000>;
225 regulator-max-microvolt = <1304000>;
226 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
230 regulator-name = "vreg_l2c_1p808";
231 regulator-min-microvolt = <1704000>;
232 regulator-max-microvolt = <2928000>;
233 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
237 regulator-name = "vreg_l5c_1p2";
238 regulator-min-microvolt = <1200000>;
239 regulator-max-microvolt = <1200000>;
240 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
241 regulator-allow-set-load;
242 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
247 regulator-name = "vreg_l7c_1p8";
248 regulator-min-microvolt = <1800000>;
249 regulator-max-microvolt = <1800000>;
250 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
254 regulator-name = "vreg_l8c_1p2";
255 regulator-min-microvolt = <1200000>;
256 regulator-max-microvolt = <1200000>;
257 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
258 regulator-allow-set-load;
259 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
264 regulator-name = "vreg_l10c_3p3";
265 regulator-min-microvolt = <3000000>;
266 regulator-max-microvolt = <3312000>;
267 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
271 regulator-name = "vreg_l11c_0p8";
272 regulator-min-microvolt = <800000>;
273 regulator-max-microvolt = <800000>;
274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
278 regulator-name = "vreg_l12c_1p808";
279 regulator-min-microvolt = <1704000>;
280 regulator-max-microvolt = <2928000>;
281 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
285 regulator-name = "vreg_l13c_2p96";
286 regulator-min-microvolt = <2504000>;
287 regulator-max-microvolt = <2960000>;
288 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
292 regulator-name = "vreg_l15c_1p9";
293 regulator-min-microvolt = <1704000>;
294 regulator-max-microvolt = <2928000>;
295 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
299 regulator-name = "vreg_l16c_3p008";
300 regulator-min-microvolt = <3008000>;
301 regulator-max-microvolt = <3008000>;
302 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
306 regulator-name = "vreg_l18c_0p88";
307 regulator-min-microvolt = <880000>;
308 regulator-max-microvolt = <880000>;
309 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
317 snps,reset-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
318 snps,reset-active-low;
319 snps,reset-delays-us = <0 11000 70000>;
321 snps,mtl-rx-config = <&mtl_rx_setup>;
322 snps,mtl-tx-config = <&mtl_tx_setup>;
324 pinctrl-names = "default";
325 pinctrl-0 = <ðernet_defaults>;
327 phy-handle = <&rgmii_phy>;
328 phy-mode = "rgmii";
329 max-speed = <1000>;
332 compatible = "snps,dwmac-mdio";
333 #address-cells = <1>;
334 #size-cells = <0>;
338 compatible = "ethernet-phy-ieee802.3-c22";
341 interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>;
342 device_type = "ethernet-phy";
346 mtl_rx_setup: rx-queues-config {
347 snps,rx-queues-to-use = <1>;
348 snps,rx-sched-sp;
351 snps,dcb-algorithm;
352 snps,map-to-dma-channel = <0x0>;
353 snps,route-up;
358 mtl_tx_setup: tx-queues-config {
359 snps,tx-queues-to-use = <1>;
360 snps,tx-sched-wrr;
364 snps,dcb-algorithm;
376 firmware-name = "qcom/sa8155p/adsp.mdt";
381 firmware-name = "qcom/sa8155p/cdsp.mdt";
387 cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
388 pinctrl-names = "default", "sleep";
389 pinctrl-0 = <&sdc2_on>;
390 pinctrl-1 = <&sdc2_off>;
391 vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */
392 vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */
393 bus-width = <4>;
394 no-sdio;
395 no-mmc;
409 reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
411 vcc-supply = <&vreg_l10a_2p96>;
412 vcc-max-microamp = <750000>;
413 vccq-supply = <&vreg_l5c_1p2>;
414 vccq-max-microamp = <700000>;
415 vccq2-supply = <&vreg_s4a_1p8>;
416 vccq2-max-microamp = <750000>;
422 vdda-phy-supply = <&vreg_l8c_1p2>;
423 vdda-pll-supply = <&vreg_l5a_0p88>;
433 pinctrl-names = "default";
434 pinctrl-0 = <&usb2phy_ac_en1_default>;
439 vdda-pll-supply = <&vdd_usb_hs_core>;
440 vdda33-supply = <&vdda_usb_hs_3p1>;
441 vdda18-supply = <&vdda_usb_hs_1p8>;
455 pinctrl-names = "default";
456 pinctrl-0 = <&usb2phy_ac_en2_default>;
461 vdda-pll-supply = <&vdd_usb_hs_core>;
462 vdda33-supply = <&vdda_usb_hs_3p1>;
463 vdda18-supply = <&vdda_usb_hs_1p8>;
468 vdda-phy-supply = <&vreg_l8c_1p2>;
469 vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
478 vdda-phy-supply = <&vreg_l18c_0p88>;
479 vdda-pll-supply = <&vreg_l8c_1p2>;
483 vdda-phy-supply = <&vreg_l18c_0p88>;
484 vdda-pll-supply = <&vreg_l8c_1p2>;
488 gpio-reserved-ranges = <0 4>;
490 sdc2_on: sdc2-on-state {
491 clk-pins {
493 bias-disable; /* No pull */
494 drive-strength = <16>; /* 16 MA */
497 cmd-pins {
499 bias-pull-up; /* pull up */
500 drive-strength = <16>; /* 16 MA */
503 data-pins {
505 bias-pull-up; /* pull up */
506 drive-strength = <16>; /* 16 MA */
509 sd-cd-pins {
512 bias-pull-up; /* pull up */
513 drive-strength = <2>; /* 2 MA */
517 sdc2_off: sdc2-off-state {
518 clk-pins {
520 bias-disable; /* No pull */
521 drive-strength = <2>; /* 2 MA */
524 cmd-pins {
526 bias-pull-up; /* pull up */
527 drive-strength = <2>; /* 2 MA */
530 data-pins {
532 bias-pull-up; /* pull up */
533 drive-strength = <2>; /* 2 MA */
536 sd-cd-pins {
539 bias-pull-up; /* pull up */
540 drive-strength = <2>; /* 2 MA */
544 usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {
547 bias-disable;
548 drive-strength = <2>;
551 usb2phy_ac_en2_default: usb2phy-ac-en2-default-state {
554 bias-disable;
555 drive-strength = <2>;
558 ethernet_defaults: ethernet-defaults-state {
559 mdc-pins {
562 bias-pull-up;
565 mdio-pins {
568 bias-pull-up;
571 rgmii-rx-pins {
574 bias-disable;
575 drive-strength = <2>;
578 rgmii-tx-pins {
581 bias-pull-up;
582 drive-strength = <16>;
585 phy-intr-pins {
588 bias-disable;
589 drive-strength = <8>;
592 pps-pins {
595 bias-disable;
596 drive-strength = <8>;
599 phy-reset-pins {
602 bias-pull-up;
603 drive-strength = <16>;