Lines Matching +full:usb2 +full:- +full:phy0
2 * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
4 * This file is dual-licensed: you can use it either under the terms
43 /dts-v1/;
45 #include "stm32h7-pinctrl.dtsi"
48 model = "STMicroelectronics STM32H743i-EVAL board";
49 compatible = "st,stm32h743i-eval", "st,stm32h743";
53 stdout-path = "serial0:115200n8";
65 vdda: regulator-vdda {
66 compatible = "regulator-fixed";
67 regulator-name = "vdda";
68 regulator-min-microvolt = <3300000>;
69 regulator-max-microvolt = <3300000>;
70 regulator-always-on;
73 v2v9_sd: regulator-v2v9_sd {
74 compatible = "regulator-fixed";
75 regulator-name = "v2v9_sd";
76 regulator-min-microvolt = <2900000>;
77 regulator-max-microvolt = <2900000>;
78 regulator-always-on;
81 usbotg_hs_phy: usb-phy {
82 #phy-cells = <0>;
83 compatible = "usb-nop-xceiv";
85 clock-names = "main_clk";
90 vdda-supply = <&vdda>;
91 vref-supply = <&vdda>;
95 st,adc-channels = <0>;
101 clock-frequency = <25000000>;
105 pinctrl-0 = <&i2c1_pins_a>;
106 pinctrl-names = "default";
107 i2c-scl-rising-time-ns = <185>;
108 i2c-scl-falling-time-ns = <20>;
118 pinctrl-0 = <ðernet_rmii>;
119 pinctrl-names = "default";
120 phy-mode = "rmii";
121 phy-handle = <&phy0>;
124 #address-cells = <1>;
125 #size-cells = <0>;
126 compatible = "snps,dwmac-mdio";
127 phy0: ethernet-phy@0 { label
134 pinctrl-names = "default", "opendrain", "sleep";
135 pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
136 pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
137 pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
138 broken-cd;
139 st,sig-dir;
140 st,neg-edge;
141 st,use-ckin;
142 bus-width = <4>;
143 vmmc-supply = <&v2v9_sd>;
148 pinctrl-0 = <&usart1_pins>;
149 pinctrl-names = "default";
154 pinctrl-0 = <&usbotg_hs_pins_a>;
155 pinctrl-names = "default";
157 phy-names = "usb2-phy";