Lines Matching +full:vcc33 +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
9 #include "rk3288-veyron.dtsi"
10 #include "rk3288-veyron-analog-audio.dtsi"
14 compatible = "google,veyron-fievel-rev8", "google,veyron-fievel-rev7",
15 "google,veyron-fievel-rev6", "google,veyron-fievel-rev5",
16 "google,veyron-fievel-rev4", "google,veyron-fievel-rev3",
17 "google,veyron-fievel-rev2", "google,veyron-fievel-rev1",
18 "google,veyron-fievel-rev0", "google,veyron-fievel",
22 compatible = "regulator-fixed";
23 regulator-name = "vccsys";
24 regulator-boot-on;
25 regulator-always-on;
32 vcc33_io: vcc33-io {
33 compatible = "regulator-fixed";
34 regulator-always-on;
35 regulator-boot-on;
36 regulator-name = "vcc33_io";
39 vcc5_host1: vcc5-host1-regulator {
40 compatible = "regulator-fixed";
41 enable-active-high;
43 pinctrl-names = "default";
44 pinctrl-0 = <&hub_usb1_pwr_en>;
45 regulator-name = "vcc5_host1";
46 regulator-always-on;
47 regulator-boot-on;
50 vcc5_host2: vcc5-host2-regulator {
51 compatible = "regulator-fixed";
52 enable-active-high;
54 pinctrl-names = "default";
55 pinctrl-0 = <&hub_usb2_pwr_en>;
56 regulator-name = "vcc5_host2";
57 regulator-always-on;
58 regulator-boot-on;
61 vcc5v_otg: vcc5v-otg-regulator {
62 compatible = "regulator-fixed";
63 enable-active-high;
65 pinctrl-names = "default";
66 pinctrl-0 = <&usb_otg_pwr_en>;
67 regulator-name = "vcc5_otg";
68 regulator-always-on;
69 regulator-boot-on;
72 ext_gmac: external-gmac-clock {
73 compatible = "fixed-clock";
74 #clock-cells = <0>;
75 clock-frequency = <125000000>;
76 clock-output-names = "ext_gmac";
83 assigned-clocks = <&cru SCLK_MAC>;
84 assigned-clock-parents = <&ext_gmac>;
86 phy-handle = <ðphy>;
87 phy-mode = "rgmii";
88 phy-supply = <&vcc33_lan>;
89 pinctrl-names = "default";
90 pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
95 * Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low)
98 snps,reset-gpio = <&gpio4 RK_PB0 0>;
99 snps,reset-active-low;
100 snps,reset-delays-us = <0 10000 30000>;
101 wakeup-source;
104 compatible = "snps,dwmac-mdio";
105 #address-cells = <1>;
106 #size-cells = <0>;
108 ethphy: ethernet-phy@1 {
115 dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
117 pinctrl-names = "default";
118 pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
120 vcc6-supply = <&vcc33_sys>;
121 vcc10-supply = <&vcc33_sys>;
122 vcc11-supply = <&vcc_5v>;
123 vcc12-supply = <&vcc33_sys>;
126 /delete-node/ LDO_REG1;
133 regulator-always-on;
134 regulator-boot-on;
135 regulator-min-microvolt = <1800000>;
136 regulator-max-microvolt = <1800000>;
137 regulator-name = "vdd18_lcdt";
138 regulator-state-mem {
139 regulator-off-in-suspend;
144 * This is not a pwren anymore, but the real power supply,
148 regulator-always-on;
149 regulator-boot-on;
150 regulator-min-microvolt = <1000000>;
151 regulator-max-microvolt = <1000000>;
152 regulator-name = "vdd10_lcd";
153 regulator-state-mem {
154 regulator-off-in-suspend;
160 regulator-always-on;
161 regulator-boot-on;
162 regulator-min-microvolt = <3300000>;
163 regulator-max-microvolt = <3300000>;
164 regulator-name = "vcc33_ccd";
165 regulator-state-mem {
166 regulator-off-in-suspend;
171 regulator-name = "vcc33_lan";
177 #address-cells = <1>;
178 #size-cells = <0>;
181 compatible = "marvell,sd8897-bt";
183 interrupt-parent = <&gpio4>;
185 marvell,wakeup-pin = /bits/ 16 <13>;
186 pinctrl-names = "default";
187 pinctrl-0 = <&bt_host_wake_l>;
192 enable-active-high;
194 pinctrl-names = "default";
195 pinctrl-0 = <&vcc50_hdmi_en>;
199 enable-active-high;
201 pinctrl-names = "default";
202 pinctrl-0 = <&drv_5v>;
206 gpio-line-names = "PMIC_SLEEP_AP",
234 gpio-line-names = "CONFIG0",
257 gpio-line-names = "FLASH0_D0",
295 gpio-line-names = "MAC_MDC",
333 gpio-line-names = "",
358 gpio-line-names = "I2S0_SCLK",
381 gpio-line-names = "LCD_BL_PWM",
414 gpio-line-names = "RAM_ID0",
428 pinctrl-names = "default", "sleep";
429 pinctrl-0 = <
444 pinctrl-1 = <
459 buck-5v {
460 drv_5v: drv-5v {
466 phy_rst: phy-rst {
470 phy_pmeb: phy-pmeb {
474 phy_int: phy-int {
480 vcc50_hdmi_en: vcc50-hdmi-en {
486 pwr_led1_on: pwr-led1-on {
490 pwr_led1_blink: pwr-led1-blink {
496 dvs_1: dvs-1 {
500 dvs_2: dvs-2 {
505 usb-bc12 {
506 usb_otg_ilim_sel: usb-otg-ilim-sel {
510 usb_usb_ilim_sel: usb-usb-ilim-sel {
515 usb-host {