Lines Matching +full:flash0 +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
7 #include <dt-bindings/input/input.h>
15 stdout-path = "serial2:115200n8";
23 ext_gmac: external-gmac-clock {
24 compatible = "fixed-clock";
25 #clock-cells = <0>;
26 clock-frequency = <125000000>;
27 clock-output-names = "ext_gmac";
31 compatible = "gpio-leds";
33 work_led: led-0 {
36 linux,default-trigger = "timer";
40 vcc_flash: flash-regulator {
41 compatible = "regulator-fixed";
42 regulator-name = "vcc_flash";
43 regulator-min-microvolt = <1800000>;
44 regulator-max-microvolt = <1800000>;
45 vin-supply = <&vcc_io>;
48 vcc_host: usb-host-regulator {
49 compatible = "regulator-fixed";
50 enable-active-high;
52 pinctrl-names = "default";
53 pinctrl-0 = <&host_vbus_drv>;
54 regulator-name = "vcc_host";
55 regulator-min-microvolt = <5000000>;
56 regulator-max-microvolt = <5000000>;
57 regulator-always-on;
58 vin-supply = <&vcc_sys>;
61 vcc_sd: sdmmc-regulator {
62 compatible = "regulator-fixed";
64 pinctrl-names = "default";
65 pinctrl-0 = <&sdmmc_pwr>;
66 regulator-name = "vcc_sd";
67 regulator-min-microvolt = <3300000>;
68 regulator-max-microvolt = <3300000>;
69 startup-delay-us = <100000>;
70 vin-supply = <&vcc_io>;
73 vcc_sys: vsys-regulator {
74 compatible = "regulator-fixed";
75 regulator-name = "vcc_sys";
76 regulator-min-microvolt = <5000000>;
77 regulator-max-microvolt = <5000000>;
78 regulator-always-on;
79 regulator-boot-on;
84 cpu-supply = <&vdd_cpu>;
88 cpu-supply = <&vdd_cpu>;
92 cpu-supply = <&vdd_cpu>;
96 cpu-supply = <&vdd_cpu>;
100 bus-width = <8>;
101 cap-mmc-highspeed;
102 non-removable;
103 pinctrl-names = "default";
104 pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
105 vmmc-supply = <&vcc_io>;
106 vqmmc-supply = <&vcc_flash>;
111 assigned-clocks = <&cru SCLK_MAC>;
112 assigned-clock-parents = <&ext_gmac>;
114 pinctrl-names = "default";
115 pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
116 phy-supply = <&vcc_lan>;
117 phy-mode = "rgmii";
118 snps,reset-active-low;
119 snps,reset-delays-us = <0 10000 1000000>;
120 snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
127 mali-supply = <&vdd_gpu>;
132 ddc-i2c-bus = <&i2c5>;
137 clock-frequency = <400000>;
142 fcs,suspend-voltage-selector = <1>;
144 regulator-name = "vdd_cpu";
145 regulator-min-microvolt = <850000>;
146 regulator-max-microvolt = <1350000>;
147 regulator-always-on;
148 regulator-boot-on;
149 regulator-enable-ramp-delay = <300>;
150 regulator-ramp-delay = <8000>;
151 vin-supply = <&vcc_sys>;
156 fcs,suspend-voltage-selector = <1>;
158 regulator-name = "vdd_gpu";
159 regulator-min-microvolt = <850000>;
160 regulator-max-microvolt = <1350000>;
161 regulator-always-on;
162 vin-supply = <&vcc_sys>;
168 #clock-cells = <0>;
169 clock-output-names = "xin32k";
173 compatible = "active-semi,act8846";
175 pinctrl-names = "default";
176 pinctrl-0 = <&pmic_vsel>;
177 system-power-controller;
179 vp1-supply = <&vcc_sys>;
180 vp2-supply = <&vcc_sys>;
181 vp3-supply = <&vcc_sys>;
182 vp4-supply = <&vcc_sys>;
183 inl1-supply = <&vcc_sys>;
184 inl2-supply = <&vcc_sys>;
185 inl3-supply = <&vcc_20>;
189 regulator-name = "vcc_ddr";
190 regulator-always-on;
194 regulator-name = "vcc_io";
195 regulator-min-microvolt = <3300000>;
196 regulator-max-microvolt = <3300000>;
197 regulator-always-on;
201 regulator-name = "vdd_log";
202 regulator-min-microvolt = <1100000>;
203 regulator-max-microvolt = <1100000>;
204 regulator-always-on;
208 regulator-name = "vcc_20";
209 regulator-min-microvolt = <2000000>;
210 regulator-max-microvolt = <2000000>;
211 regulator-always-on;
215 regulator-name = "vccio_sd";
216 regulator-min-microvolt = <3300000>;
217 regulator-max-microvolt = <3300000>;
218 regulator-always-on;
222 regulator-name = "vdd10_lcd";
223 regulator-min-microvolt = <1000000>;
224 regulator-max-microvolt = <1000000>;
225 regulator-always-on;
229 regulator-name = "vcca_18";
230 regulator-min-microvolt = <1800000>;
231 regulator-max-microvolt = <1800000>;
235 regulator-name = "vcca_33";
236 regulator-min-microvolt = <3300000>;
237 regulator-max-microvolt = <3300000>;
241 regulator-name = "vcc_lan";
242 regulator-min-microvolt = <3300000>;
243 regulator-max-microvolt = <3300000>;
247 regulator-name = "vdd_10";
248 regulator-min-microvolt = <1000000>;
249 regulator-max-microvolt = <1000000>;
250 regulator-always-on;
254 regulator-name = "vcc_18";
255 regulator-min-microvolt = <1800000>;
256 regulator-max-microvolt = <1800000>;
257 regulator-always-on;
261 regulator-name = "vcc18_lcd";
262 regulator-min-microvolt = <1800000>;
263 regulator-max-microvolt = <1800000>;
264 regulator-always-on;
289 audio-supply = <&vcca_33>;
290 flash0-supply = <&vcc_flash>;
291 flash1-supply = <&vcc_lan>;
292 gpio30-supply = <&vcc_io>;
293 gpio1830-supply = <&vcc_io>;
294 lcdc-supply = <&vcc_io>;
295 sdcard-supply = <&vccio_sd>;
296 wifi-supply = <&vcc_18>;
300 pcfg_output_high: pcfg-output-high {
301 output-high;
304 pcfg_output_low: pcfg-output-low {
305 output-low;
308 pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
309 bias-pull-up;
310 drive-strength = <12>;
314 pmic_int: pmic-int {
318 pmic_sleep: pmic-sleep {
322 pmic_vsel: pmic-vsel {
328 phy_int: phy-int {
332 phy_pmeb: phy-pmeb {
336 phy_rst: phy-rst {
344 * high-speed mode on firefly board so bump up to 12ma.
346 sdmmc_bus4: sdmmc-bus4 {
353 sdmmc_clk: sdmmc-clk {
357 sdmmc_cmd: sdmmc-cmd {
361 sdmmc_pwr: sdmmc-pwr {
367 host_vbus_drv: host-vbus-drv {
374 vref-supply = <&vcc_18>;
379 bus-width = <4>;
380 cap-mmc-highspeed;
381 cap-sd-highspeed;
382 card-detect-delay = <200>;
383 disable-wp;
384 pinctrl-names = "default";
385 pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
386 vmmc-supply = <&vcc_sd>;
387 vqmmc-supply = <&vccio_sd>;
392 rockchip,hw-tshut-mode = <0>;
393 rockchip,hw-tshut-polarity = <0>;