Lines Matching +full:hall +full:- +full:enable
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/input/input.h>
9 #include "qcom-msm8226.dtsi"
12 /delete-node/ &adsp_region;
13 /delete-node/ &smem_region;
17 compatible = "samsung,matisse-wifi", "qcom,apq8026";
18 chassis-type = "tablet";
27 #address-cells = <1>;
28 #size-cells = <1>;
31 stdout-path = "display0";
34 compatible = "simple-framebuffer";
43 gpio-hall-sensor {
44 compatible = "gpio-keys";
46 event-hall-sensor {
47 label = "Hall Effect Sensor";
49 linux,input-type = <EV_SW>;
51 debounce-interval = <15>;
52 linux,can-disable;
53 wakeup-source;
57 gpio-keys {
58 compatible = "gpio-keys";
61 key-home {
65 debounce-interval = <15>;
68 key-volume-down {
72 debounce-interval = <15>;
75 key-volume-up {
79 debounce-interval = <15>;
83 i2c-backlight {
84 compatible = "i2c-gpio";
85 sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
86 scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
88 pinctrl-0 = <&backlight_i2c_default_state>;
89 pinctrl-names = "default";
91 i2c-gpio,delay-us = <4>;
93 #address-cells = <1>;
94 #size-cells = <0>;
100 dev-ctrl = /bits/ 8 <0x80>;
101 init-brt = /bits/ 8 <0x3f>;
104 pwm-names = "lp8556";
106 rom-a0h {
107 rom-addr = /bits/ 8 <0xa0>;
108 rom-val = /bits/ 8 <0x44>;
111 rom-a1h {
112 rom-addr = /bits/ 8 <0xa1>;
113 rom-val = /bits/ 8 <0x6c>;
116 rom-a5h {
117 rom-addr = /bits/ 8 <0xa5>;
118 rom-val = /bits/ 8 <0x24>;
124 compatible = "clk-pwm";
125 #pwm-cells = <2>;
127 pinctrl-0 = <&backlight_pwm_default_state>;
128 pinctrl-names = "default";
131 reg_tsp_1p8v: regulator-tsp-1p8v {
132 compatible = "regulator-fixed";
133 regulator-name = "tsp_1p8v";
134 regulator-min-microvolt = <1800000>;
135 regulator-max-microvolt = <1800000>;
138 enable-active-high;
140 pinctrl-names = "default";
141 pinctrl-0 = <&tsp_en_default_state>;
144 reg_tsp_3p3v: regulator-tsp-3p3v {
145 compatible = "regulator-fixed";
146 regulator-name = "tsp_3p3v";
147 regulator-min-microvolt = <3300000>;
148 regulator-max-microvolt = <3300000>;
151 enable-active-high;
153 pinctrl-names = "default";
154 pinctrl-0 = <&tsp_en1_default_state>;
157 reserved-memory {
158 #address-cells = <1>;
159 #size-cells = <1>;
164 no-map;
169 no-map;
174 no-map;
179 no-map;
184 no-map;
189 no-map;
194 no-map;
199 no-map;
204 no-map;
209 no-map;
213 compatible = "qcom,rmtfs-mem";
215 no-map;
217 qcom,client-id = <1>;
233 interrupt-parent = <&tlmm>;
236 pinctrl-names = "default";
237 pinctrl-0 = <&accel_int_default_state>;
239 st,drdy-int-pin = <1>;
241 vdd-supply = <&pm8226_l19>;
242 vddio-supply = <&pm8226_lvs1>;
249 muic: usb-switch@25 {
250 compatible = "siliconmitus,sm5502-muic";
253 interrupt-parent = <&tlmm>;
256 pinctrl-names = "default";
257 pinctrl-0 = <&muic_int_default_state>;
268 interrupt-parent = <&tlmm>;
271 pinctrl-names = "default";
272 pinctrl-0 = <&tsp_int_rst_default_state>;
274 reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>;
276 vdd-supply = <®_tsp_1p8v>;
277 vdda-supply = <®_tsp_3p3v>;
283 compatible = "qcom,rpm-pm8226-regulators";
286 regulator-min-microvolt = <1200000>;
287 regulator-max-microvolt = <1300000>;
291 regulator-min-microvolt = <1800000>;
292 regulator-max-microvolt = <1800000>;
296 regulator-min-microvolt = <1150000>;
297 regulator-max-microvolt = <1150000>;
301 regulator-min-microvolt = <1225000>;
302 regulator-max-microvolt = <1225000>;
306 regulator-min-microvolt = <1200000>;
307 regulator-max-microvolt = <1200000>;
311 regulator-min-microvolt = <750000>;
312 regulator-max-microvolt = <1337500>;
313 regulator-always-on;
317 regulator-min-microvolt = <1200000>;
318 regulator-max-microvolt = <1200000>;
322 regulator-min-microvolt = <1200000>;
323 regulator-max-microvolt = <1200000>;
327 regulator-min-microvolt = <1800000>;
328 regulator-max-microvolt = <1800000>;
329 regulator-always-on;
333 regulator-min-microvolt = <1850000>;
334 regulator-max-microvolt = <1850000>;
338 regulator-min-microvolt = <1800000>;
339 regulator-max-microvolt = <1800000>;
340 regulator-always-on;
344 regulator-min-microvolt = <2050000>;
345 regulator-max-microvolt = <2050000>;
349 regulator-min-microvolt = <1800000>;
350 regulator-max-microvolt = <1800000>;
354 regulator-min-microvolt = <1800000>;
355 regulator-max-microvolt = <1800000>;
359 regulator-min-microvolt = <2750000>;
360 regulator-max-microvolt = <2750000>;
364 regulator-min-microvolt = <1800000>;
365 regulator-max-microvolt = <3300000>;
369 regulator-min-microvolt = <3000000>;
370 regulator-max-microvolt = <3350000>;
374 regulator-min-microvolt = <2950000>;
375 regulator-max-microvolt = <2950000>;
377 regulator-system-load = <200000>;
378 regulator-allow-set-load;
379 regulator-always-on;
383 regulator-min-microvolt = <2950000>;
384 regulator-max-microvolt = <2950000>;
388 regulator-min-microvolt = <2850000>;
389 regulator-max-microvolt = <3000000>;
393 regulator-min-microvolt = <3075000>;
394 regulator-max-microvolt = <3075000>;
398 regulator-min-microvolt = <1800000>;
399 regulator-max-microvolt = <2950000>;
403 regulator-min-microvolt = <1800000>;
404 regulator-max-microvolt = <3000000>;
408 regulator-min-microvolt = <1800000>;
409 regulator-max-microvolt = <3300000>;
413 regulator-min-microvolt = <1300000>;
414 regulator-max-microvolt = <1350000>;
418 regulator-min-microvolt = <1775000>;
419 regulator-max-microvolt = <2125000>;
423 regulator-min-microvolt = <1225000>;
424 regulator-max-microvolt = <1300000>;
428 regulator-min-microvolt = <1800000>;
429 regulator-max-microvolt = <1800000>;
433 regulator-min-microvolt = <1800000>;
434 regulator-max-microvolt = <2950000>;
442 vmmc-supply = <&pm8226_l17>;
443 vqmmc-supply = <&pm8226_l6>;
445 bus-width = <8>;
446 non-removable;
452 vmmc-supply = <&pm8226_l18>;
453 vqmmc-supply = <&pm8226_l21>;
455 bus-width = <4>;
456 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
462 accel_int_default_state: accel-int-default-state {
465 drive-strength = <2>;
466 bias-disable;
469 backlight_i2c_default_state: backlight-i2c-default-state {
472 drive-strength = <2>;
473 bias-disable;
476 backlight_pwm_default_state: backlight-pwm-default-state {
481 muic_int_default_state: muic-int-default-state {
484 drive-strength = <2>;
485 bias-disable;
488 tsp_en_default_state: tsp-en-default-state {
491 drive-strength = <2>;
492 bias-disable;
495 tsp_en1_default_state: tsp-en1-default-state {
498 drive-strength = <2>;
499 bias-disable;
502 tsp_int_rst_default_state: tsp-int-rst-default-state {
505 drive-strength = <10>;
506 bias-pull-up;
517 v1p8-supply = <&pm8226_l10>;
518 v3p3-supply = <&pm8226_l20>;