Lines Matching +full:hvdd +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/thermal/thermal.h>
14 stdout-path = "serial0:115200n8";
20 * missing a unit-address. However, the bootloader on these Chromebook
22 * Adding the unit-address causes the bootloader to create a /memory
34 /delete-node/ memory@80000000;
40 vdd-supply = <&vdd_3v3_hdmi>;
41 pll-supply = <&vdd_hdmi_pll>;
42 hdmi-supply = <&vdd_5v0_hdmi>;
44 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
45 nvidia,hpd-gpio =
52 avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
53 vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>;
60 vdd-supply = <&vdd_3v3_panel>;
68 vdd-supply = <&vdd_gpu>;
73 /delete-property/ dmas;
74 /delete-property/ dma-names;
84 clock-frequency = <100000>;
86 acodec: audio-codec@10 {
89 interrupt-parent = <&gpio>;
93 tmp451: temperature-sensor@4c {
96 interrupt-parent = <&gpio>;
99 #thermal-sensor-cells = <1>;
105 clock-frequency = <100000>;
110 interrupt-parent = <&gpio>;
112 wakeup-source;
118 clock-frequency = <400000>;
128 clock-frequency = <100000>;
133 clock-frequency = <400000>;
140 ams,system-power-controller;
142 #interrupt-cells = <2>;
143 interrupt-controller;
145 gpio-controller;
146 #gpio-cells = <2>;
148 pinctrl-names = "default";
149 pinctrl-0 = <&as3722_default>;
155 bias-pull-down;
161 bias-pull-up;
167 bias-pull-up;
172 bias-high-impedance;
177 function = "clk32k-out";
178 bias-pull-down;
183 vsup-sd2-supply = <&vdd_5v0_sys>;
184 vsup-sd3-supply = <&vdd_5v0_sys>;
185 vsup-sd4-supply = <&vdd_5v0_sys>;
186 vsup-sd5-supply = <&vdd_5v0_sys>;
187 vin-ldo0-supply = <&vdd_1v35_lp0>;
188 vin-ldo1-6-supply = <&vdd_3v3_run>;
189 vin-ldo2-5-7-supply = <&vddio_1v8>;
190 vin-ldo3-4-supply = <&vdd_3v3_sys>;
191 vin-ldo9-10-supply = <&vdd_5v0_sys>;
192 vin-ldo11-supply = <&vdd_3v3_run>;
195 regulator-name = "+VDD_CPU_AP";
196 regulator-min-microvolt = <700000>;
197 regulator-max-microvolt = <1350000>;
198 regulator-min-microamp = <3500000>;
199 regulator-max-microamp = <3500000>;
200 regulator-always-on;
201 regulator-boot-on;
202 ams,ext-control = <2>;
206 regulator-name = "+VDD_CORE";
207 regulator-min-microvolt = <700000>;
208 regulator-max-microvolt = <1350000>;
209 regulator-min-microamp = <2500000>;
210 regulator-max-microamp = <4000000>;
211 regulator-always-on;
212 regulator-boot-on;
213 ams,ext-control = <1>;
217 regulator-name = "+1.35V_LP0(sd2)";
218 regulator-min-microvolt = <1350000>;
219 regulator-max-microvolt = <1350000>;
220 regulator-always-on;
221 regulator-boot-on;
225 regulator-name = "+1.35V_LP0(sd3)";
226 regulator-min-microvolt = <1350000>;
227 regulator-max-microvolt = <1350000>;
228 regulator-always-on;
229 regulator-boot-on;
233 regulator-name = "+1.05V_RUN";
234 regulator-min-microvolt = <1050000>;
235 regulator-max-microvolt = <1050000>;
239 regulator-name = "+1.8V_VDDIO";
240 regulator-min-microvolt = <1800000>;
241 regulator-max-microvolt = <1800000>;
242 regulator-always-on;
246 regulator-name = "+VDD_GPU_AP";
247 regulator-min-microvolt = <650000>;
248 regulator-max-microvolt = <1200000>;
249 regulator-min-microamp = <3500000>;
250 regulator-max-microamp = <3500000>;
251 regulator-boot-on;
252 regulator-always-on;
256 regulator-name = "+1.05V_RUN_AVDD";
257 regulator-min-microvolt = <1050000>;
258 regulator-max-microvolt = <1050000>;
259 regulator-boot-on;
260 regulator-always-on;
261 ams,ext-control = <1>;
265 regulator-name = "+1.8V_RUN_CAM";
266 regulator-min-microvolt = <1800000>;
267 regulator-max-microvolt = <1800000>;
271 regulator-name = "+1.2V_GEN_AVDD";
272 regulator-min-microvolt = <1200000>;
273 regulator-max-microvolt = <1200000>;
274 regulator-boot-on;
275 regulator-always-on;
279 regulator-name = "+1.00V_LP0_VDD_RTC";
280 regulator-min-microvolt = <1000000>;
281 regulator-max-microvolt = <1000000>;
282 regulator-boot-on;
283 regulator-always-on;
284 ams,enable-tracking;
288 regulator-name = "+3.3V_RUN_CAM";
289 regulator-min-microvolt = <2800000>;
290 regulator-max-microvolt = <2800000>;
294 regulator-name = "+1.2V_RUN_CAM_FRONT";
295 regulator-min-microvolt = <1200000>;
296 regulator-max-microvolt = <1200000>;
300 regulator-name = "+VDDIO_SDMMC3";
301 regulator-min-microvolt = <1800000>;
302 regulator-max-microvolt = <3300000>;
306 regulator-name = "+1.05V_RUN_CAM_REAR";
307 regulator-min-microvolt = <1050000>;
308 regulator-max-microvolt = <1050000>;
312 regulator-name = "+2.8V_RUN_TOUCH";
313 regulator-min-microvolt = <2800000>;
314 regulator-max-microvolt = <2800000>;
318 regulator-name = "+2.8V_RUN_CAM_AF";
319 regulator-min-microvolt = <2800000>;
320 regulator-max-microvolt = <2800000>;
324 regulator-name = "+1.8V_RUN_VPP_FUSE";
325 regulator-min-microvolt = <1800000>;
326 regulator-max-microvolt = <1800000>;
335 cros_ec: cros-ec@0 {
336 compatible = "google,cros-ec-spi";
337 spi-max-frequency = <3000000>;
338 interrupt-parent = <&gpio>;
342 google,cros-ec-spi-msg-delay = <2000>;
344 i2c-tunnel {
345 compatible = "google,cros-ec-i2c-tunnel";
346 #address-cells = <1>;
347 #size-cells = <0>;
349 google,remote-bus = <0>;
354 interrupt-parent = <&gpio>;
357 ti,ac-detect-gpios = <&gpio
360 ti,external-control;
363 battery: sbs-battery@b {
364 compatible = "sbs,sbs-battery";
366 sbs,i2c-retry-count = <2>;
367 sbs,poll-retry-count = <10>;
368 power-supplies = <&charger>;
376 spi-max-frequency = <25000000>;
379 compatible = "winbond,w25q32dw", "jedec,spi-nor";
380 spi-max-frequency = <25000000>;
386 nvidia,invert-interrupt;
387 nvidia,suspend-mode = <0>;
388 nvidia,cpu-pwr-good-time = <500>;
389 nvidia,cpu-pwr-off-time = <300>;
390 nvidia,core-pwr-good-time = <641 3845>;
391 nvidia,core-pwr-off-time = <61036>;
392 nvidia,core-power-req-active-high;
393 nvidia,sys-clock-req-active-high;
405 phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
406 <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
407 <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
408 <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
409 <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
410 phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
412 avddio-pex-supply = <&vdd_1v05_run>;
413 dvddio-pex-supply = <&vdd_1v05_run>;
414 avdd-usb-supply = <&vdd_3v3_lp0>;
415 avdd-pll-utmip-supply = <&vddio_1v8>;
416 avdd-pll-erefe-supply = <&avdd_1v05_run>;
417 avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
418 hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
419 hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
427 avdd-pll-utmip-supply = <&vddio_1v8>;
428 avdd-pll-erefe-supply = <&avdd_1v05_run>;
429 avdd-pex-pll-supply = <&vdd_1v05_run>;
430 hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
437 usb2-0 {
442 usb2-1 {
447 usb2-2 {
458 pcie-0 {
459 nvidia,function = "usb3-ss";
463 pcie-1 {
464 nvidia,function = "usb3-ss";
472 usb2-0 {
473 vbus-supply = <&vdd_usb1_vbus>;
476 usb-role-switch;
479 usb2-1 {
480 vbus-supply = <&vdd_run_cam>;
485 usb2-2 {
486 vbus-supply = <&vdd_usb3_vbus>;
491 usb3-0 {
492 nvidia,usb2-companion = <0>;
496 usb3-1 {
497 nvidia,usb2-companion = <1>;
505 bus-width = <4>;
506 no-1-8-v;
507 non-removable;
508 mmc-pwrseq = <&sdhci0_pwrseq>;
509 vmmc-supply = <&vdd_3v3_lp0>;
510 vqmmc-supply = <&vddio_1v8>;
511 keep-power-in-suspend;
516 cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
517 power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
518 bus-width = <4>;
519 no-1-8-v;
520 vqmmc-supply = <&vddio_sdmmc3>;
525 bus-width = <8>;
526 no-1-8-v;
527 non-removable;
533 vdd-cpu-supply = <&vdd_cpu>;
534 nvidia,i2c-fs-rate = <400000>;
544 compatible = "pwm-backlight";
546 enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
547 power-supply = <&vdd_led>;
550 default-brightness-level = <224>;
551 brightness-levels =
587 clk32k_in: clock-32k {
588 compatible = "fixed-clock";
589 clock-frequency = <32768>;
590 #clock-cells = <0>;
595 #cooling-cells = <2>;
596 vdd-cpu-supply = <&vdd_cpu>;
600 #cooling-cells = <2>;
604 #cooling-cells = <2>;
608 #cooling-cells = <2>;
612 gpio-keys {
613 compatible = "gpio-keys";
615 key-power {
619 debounce-interval = <30>;
620 wakeup-source;
623 switch-lid {
626 linux,input-type = <5>;
628 debounce-interval = <1>;
629 wakeup-source;
633 gpio-restart {
634 compatible = "gpio-restart";
639 sdhci0_pwrseq: pwrseq-sdhci0 {
640 compatible = "mmc-pwrseq-simple";
642 reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
645 vdd_mux: regulator-mux {
646 compatible = "regulator-fixed";
647 regulator-name = "+VDD_MUX";
648 regulator-min-microvolt = <12000000>;
649 regulator-max-microvolt = <12000000>;
650 regulator-always-on;
651 regulator-boot-on;
654 vdd_5v0_sys: regulator-5v0sys {
655 compatible = "regulator-fixed";
656 regulator-name = "+5V_SYS";
657 regulator-min-microvolt = <5000000>;
658 regulator-max-microvolt = <5000000>;
659 regulator-always-on;
660 regulator-boot-on;
661 vin-supply = <&vdd_mux>;
664 vdd_3v3_sys: regulator-3v3sys {
665 compatible = "regulator-fixed";
666 regulator-name = "+3.3V_SYS";
667 regulator-min-microvolt = <3300000>;
668 regulator-max-microvolt = <3300000>;
669 regulator-always-on;
670 regulator-boot-on;
671 vin-supply = <&vdd_mux>;
674 vdd_3v3_run: regulator-3v3run {
675 compatible = "regulator-fixed";
676 regulator-name = "+3.3V_RUN";
677 regulator-min-microvolt = <3300000>;
678 regulator-max-microvolt = <3300000>;
679 regulator-always-on;
680 regulator-boot-on;
682 enable-active-high;
683 vin-supply = <&vdd_3v3_sys>;
686 vdd_3v3_hdmi: regulator-3v3hdmi {
687 compatible = "regulator-fixed";
688 regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
689 regulator-min-microvolt = <3300000>;
690 regulator-max-microvolt = <3300000>;
691 vin-supply = <&vdd_3v3_run>;
694 vdd_led: regulator-led {
695 compatible = "regulator-fixed";
696 regulator-name = "+VDD_LED";
698 enable-active-high;
699 vin-supply = <&vdd_mux>;
702 vdd_5v0_ts: regulator-ts {
703 compatible = "regulator-fixed";
704 regulator-name = "+5V_VDD_TS_SW";
705 regulator-min-microvolt = <5000000>;
706 regulator-max-microvolt = <5000000>;
707 regulator-boot-on;
709 enable-active-high;
710 vin-supply = <&vdd_5v0_sys>;
713 vdd_usb1_vbus: regulator-usb1 {
714 compatible = "regulator-fixed";
715 regulator-name = "+5V_USB_HS";
716 regulator-min-microvolt = <5000000>;
717 regulator-max-microvolt = <5000000>;
719 enable-active-high;
720 gpio-open-drain;
721 vin-supply = <&vdd_5v0_sys>;
724 vdd_usb3_vbus: regulator-usb3 {
725 compatible = "regulator-fixed";
726 regulator-name = "+5V_USB_SS";
727 regulator-min-microvolt = <5000000>;
728 regulator-max-microvolt = <5000000>;
730 enable-active-high;
731 gpio-open-drain;
732 vin-supply = <&vdd_5v0_sys>;
735 vdd_3v3_panel: regulator-panel {
736 compatible = "regulator-fixed";
737 regulator-name = "+3.3V_PANEL";
738 regulator-min-microvolt = <3300000>;
739 regulator-max-microvolt = <3300000>;
741 enable-active-high;
742 vin-supply = <&vdd_3v3_run>;
745 vdd_3v3_lp0: regulator-lp0 {
746 compatible = "regulator-fixed";
747 regulator-name = "+3.3V_LP0";
748 regulator-min-microvolt = <3300000>;
749 regulator-max-microvolt = <3300000>;
754 regulator-always-on;
756 enable-active-high;
757 vin-supply = <&vdd_3v3_sys>;
760 vdd_hdmi_pll: regulator-hdmipll {
761 compatible = "regulator-fixed";
762 regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
763 regulator-min-microvolt = <1050000>;
764 regulator-max-microvolt = <1050000>;
766 vin-supply = <&vdd_1v05_run>;
769 vdd_5v0_hdmi: regulator-hdmicon {
770 compatible = "regulator-fixed";
771 regulator-name = "+5V_HDMI_CON";
772 regulator-min-microvolt = <5000000>;
773 regulator-max-microvolt = <5000000>;
775 enable-active-high;
776 vin-supply = <&vdd_5v0_sys>;
780 nvidia,audio-routing =
790 nvidia,i2s-controller = <&tegra_i2s1>;
791 nvidia,audio-codec = <&acodec>;
796 clock-names = "pll_a", "pll_a_out0", "mclk";
798 assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
801 assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
804 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
805 nvidia,mic-det-gpios =
809 thermal-zones {
810 cpu-skin-thermal {
811 polling-delay-passive = <1000>; /* milliseconds */
812 polling-delay = <5000>; /* milliseconds */
814 thermal-sensors = <&tmp451 0>;
817 cpu_passive_trip: cpu-alert0 {
825 cooling-maps {
828 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
838 #include "../cros-ec-keyboard.dtsi"