Lines Matching +full:use +full:- +full:ncsi
1 // SPDX-License-Identifier: GPL-2.0+
3 /dts-v1/;
4 #include "aspeed-g5.dtsi"
5 #include <dt-bindings/gpio/aspeed-gpio.h>
9 compatible = "yadro,nicole-bmc", "aspeed,ast2500";
12 stdout-path = &uart5;
20 reserved-memory {
21 #address-cells = <1>;
22 #size-cells = <1>;
26 no-map;
31 no-map;
37 no-map;
43 compatible = "shared-dma-pool";
50 compatible = "shared-dma-pool";
56 compatible = "gpio-leds";
79 fsi: gpio-fsi {
80 compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
81 #address-cells = <2>;
82 #size-cells = <0>;
83 no-gpio-delays;
85 memory-region = <&coldfire_memory>;
89 clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
90 data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
91 mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
92 enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
93 trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
96 gpio-keys {
97 compatible = "gpio-keys";
99 event-checkstop {
106 iio-hwmon-battery {
107 compatible = "iio-hwmon";
108 io-channels = <&adc 12>;
116 m25p,fast-read;
118 spi-max-frequency = <50000000>;
119 #include "openbmc-flash-layout.dtsi"
125 pinctrl-names = "default";
126 pinctrl-0 = <&pinctrl_spi1_default>;
130 m25p,fast-read;
132 spi-max-frequency = <100000000>;
138 memory-region = <&flash_memory>;
143 /* Rear RS-232 connector */
146 pinctrl-names = "default";
147 pinctrl-0 = <&pinctrl_txd1_default
164 use-ncsi;
166 pinctrl-names = "default";
167 pinctrl-0 = <&pinctrl_rmii1_default>;
170 clock-names = "MACCLK", "RCLK";
218 gpio-line-names =
219 /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","",
220 /*B0-B7*/ "","","","","","","","",
221 /*C0-C7*/ "","","","","","","","",
222 /*D0-D7*/ "fsi-enable","bmc_power_up","sys_pwrok_buf",
224 /*E0-E7*/ "","ncsi_cfg","","","","","","",
225 /*F0-F7*/ "","","","","","","","",
226 /*G0-G7*/ "","","","","","","","",
227 /*H0-H7*/ "","","","","","","","",
228 /*I0-I7*/ "","","","","","","","",
229 /*J0-J7*/ "","","checkstop","","","","","",
230 /*K0-K7*/ "","","","","","","","",
231 /*L0-L7*/ "","","","","","","","",
232 /*M0-M7*/ "","","","","","","","",
233 /*N0-N7*/ "","","","","","","","",
234 /*O0-O7*/ "","","power-button","","","","","",
235 /*P0-P7*/ "","fsi-trans","pm_rtc_adc_en","","","","","",
236 /*Q0-Q7*/ "","","","","","","","id-button",
237 /*R0-R7*/ "","software_pwrgood","","","","","","",
238 /*S0-S7*/ "","","","","","","","seq_cont",
239 /*T0-T7*/ "","","","","","","","",
240 /*U0-U7*/ "","","","","","","","",
241 /*V0-V7*/ "","","","","","","","",
242 /*W0-W7*/ "","","","","","","","",
243 /*X0-X7*/ "","","","","","","","",
244 /*Y0-Y7*/ "","","","","","","","",
245 /*Z0-Z7*/ "","","","","","","","",
246 /*AA0-AA7*/ "fsi-clock","led-attention","fsi-data","led-fault",
247 "led-power","","","led-identify",
248 /*AB0-AB7*/ "","","","","","","","",
249 /*AC0-AC7*/ "","","","","","","","";
252 gpio-hog;
254 output-low;
257 gpio-hog;
259 output-low;
262 gpio-hog;
264 output-low;
267 gpio-hog;
269 output-low;
272 gpio-hog;
284 memory-region = <&gfx_memory>;
288 aspeed,external-nodes = <&gfx &lhc>;
302 pinctrl-names = "default";
303 pinctrl-0 = <&pinctrl_adc0_default
323 memory-region = <&video_engine_memory>;
326 #include "ibm-power9-dual.dtsi"