Lines Matching +full:otp +full:- +full:1

3 The tps659038 for the AM57x class have OTP spins that
5 is not a need to add the OTP spins to the palmas driver. The
11 - compatible : Should be from the list
12   ti,twl6035-pmic
13   ti,twl6036-pmic
14   ti,twl6037-pmic
15   ti,tps65913-pmic
16   ti,tps65914-pmic
17   ti,tps65917-pmic
18   ti,tps659038-pmic
20   ti,palmas-pmic
21 - interrupts : The interrupt number and the type which can be looked up here:
22 	       arch/arm/boot/dts/include/dt-bindings/interrupt-controller/irq.h
23 - interrupts-name: The names of the individual interrupts.
26 - ti,ldo6-vibrator : ldo6 is in vibrator mode
29 - regulators : Must contain a sub-node per regulator from the list below.
30 	       Each sub-node should contain the constraints and initialization
32 	       description of standard properties for these sub-nodes.
35 	       For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP,
36 	       smps45, smps457, smps7 depending on variant, smps6, smps[8-9],
37 	       smps10_out2, smps10_out1, ldo[1-9], ldoln, ldousb.
39 	       Optional sub-node properties:
40 	       ti,warm-reset - maintain voltage during warm reset(boolean)
41 	       ti,roof-floor - This takes as optional argument on platform supporting
45 			ENABLE1 then 1,
48 	       ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto,
49 	       2 - eco, 3 - forced pwm
50 	       ti,smps-range - OTP has the wrong range set for the hardware so override
51 	       0 - low range, 1 - high range.
53 - ti,system-power-controller: Telling whether or not this pmic is controlling
58 #include <dt-bindings/interrupt-controller/irq.h>
61 	compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
62 	interrupt-parent = <&palmas>;
64 	interrupts-name = "short-irq";
66 	ti,ldo6-vibrator;
68 	ti,system-power-controller;
72 			regulator-name = "smps12";
73 			regulator-min-microvolt = < 600000>;
74 			regulator-max-microvolt = <1500000>;
75 			regulator-always-on;
76 			regulator-boot-on;
77 			ti,warm-reset;
78 			ti,roof-floor = <1>; /* ENABLE1 control */
79 			ti,mode-sleep = <0>;
80 			ti,smps-range = <1>;
84 			regulator-name = "ldo1";
85 			regulator-min-microvolt = <2800000>;
86 			regulator-max-microvolt = <2800000>;