Lines Matching +full:high +full:- +full:efficiency
3 This is a part of device tree bindings of MAX77802 multi-function device.
6 The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO)
12 - inb1-supply: The input supply for BUCK1
13 - inb2-supply: The input supply for BUCK2
14 - inb3-supply: The input supply for BUCK3
15 - inb4-supply: The input supply for BUCK4
16 - inb5-supply: The input supply for BUCK5
17 - inb6-supply: The input supply for BUCK6
18 - inb7-supply: The input supply for BUCK7
19 - inb8-supply: The input supply for BUCK8
20 - inb9-supply: The input supply for BUCK9
21 - inb10-supply: The input supply for BUCK10
22 - inl1-supply: The input supply for LDO8 and LDO15
23 - inl2-supply: The input supply for LDO17, LDO27, LDO30 and LDO35
24 - inl3-supply: The input supply for LDO3, LDO5, LDO6 and LDO7
25 - inl4-supply: The input supply for LDO10, LDO11, LDO13 and LDO14
26 - inl5-supply: The input supply for LDO9 and LDO19
27 - inl6-supply: The input supply for LDO4, LDO21, LDO24 and LDO33
28 - inl7-supply: The input supply for LDO18, LDO20, LDO28 and LDO29
29 - inl9-supply: The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34
30 - inl10-supply: The input supply for LDO1 and LDO2
33 - regulators : The regulators of max77802 have to be instantiated
36 regulator-name {
44 -LDOn : for LDOs, where n can lie in ranges 1-15, 17-21, 23-30
45 and 32-35.
47 -BUCKn : for BUCKs, where n can lie in range 1 to 10.
56 The regulators that support the standard "regulator-initial-mode" property,
59 The possible values for "regulator-initial-mode" and "regulator-mode" are:
63 The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
66 The standard "regulator-mode" property can only be used for regulators that
68 are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has
69 been enabled for the given suspend state using "regulator-on-in-suspend" and
70 has not been disabled for that state using "regulator-off-in-suspend".
76 interrupt-parent = <&wakeup_eint>;
79 #address-cells = <1>;
80 #size-cells = <0>;
82 inb1-supply = <&parent_reg>;
86 regulator-name = "vdd_1v0";
87 regulator-min-microvolt = <1000000>;
88 regulator-max-microvolt = <1000000>;
89 regulator-always-on;
90 regulator-initial-mode = <MAX77802_OPMODE_LP>;
94 regulator-name = "vdd_ldo11";
95 regulator-min-microvolt = <1900000>;
96 regulator-max-microvolt = <1900000>;
97 regulator-always-on;
98 regulator-state-mem {
99 regulator-on-in-suspend;
100 regulator-mode = <MAX77802_OPMODE_LP>;
105 regulator-name = "vdd_mif";
106 regulator-min-microvolt = <950000>;
107 regulator-max-microvolt = <1300000>;
108 regulator-always-on;
109 regulator-boot-on;