Lines Matching +full:mdio +full:- +full:gpio

4 - compatible:	"lantiq,<chip>-pinctrl", where <chip> is:
10 - reg: Should contain the physical address and length of the gpio/pinmux
13 Please refer to pinctrl-bindings.txt in this directory for details of the
21 pull-up and open-drain
36 Required subnode-properties:
37 - lantiq,groups : An array of strings. Each string contains the name of a group.
39 - lantiq,function: A string containing the name of the function to mux to the
48     clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2
51     spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe
70     clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
74     spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe
85     gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1,
89     spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy
98     mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1
101     spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy
106 Required subnode-properties:
107 - lantiq,pins : An array of strings. Each string contains the name of a pin.
110 Optional subnode-properties:
111 - lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
113 - lantiq,open-drain: Boolean, enables open-drain on the defined pin.
116   Pinconf pins can be referenced via the names io0-io31.
119   Pinconf pins can be referenced via the names io0-io31.
122   Pinconf pins can be referenced via the names io0-io55.
125   Pinconf pins can be referenced via the names io0-io49.
128   Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11,
129 						io13-io19,io23-io27,io34-io36,
130 						io42-io43,io48-io61.
133 	gpio: pinmux@e100b10 {
134 		compatible = "lantiq,danube-pinctrl";
135 		pinctrl-names = "default";
136 		pinctrl-0 = <&state_default>;
138 		#gpio-cells = <2>;
139 		gpio-controller;
153 				lantiq,open-drain;