Lines Matching +full:bank +full:- +full:name
1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/pinctrl/allwinner,sun4i-a10-pinctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#gpio-cells":
18 bank, then the pin number inside that bank, and finally the GPIO
21 "#interrupt-cells":
25 of the bank, then the pin number inside that bank, and finally
30 - allwinner,sun4i-a10-pinctrl
31 - allwinner,sun5i-a10s-pinctrl
32 - allwinner,sun5i-a13-pinctrl
33 - allwinner,sun6i-a31-pinctrl
34 - allwinner,sun6i-a31-r-pinctrl
35 - allwinner,sun6i-a31s-pinctrl
36 - allwinner,sun7i-a20-pinctrl
37 - allwinner,sun8i-a23-pinctrl
38 - allwinner,sun8i-a23-r-pinctrl
39 - allwinner,sun8i-a33-pinctrl
40 - allwinner,sun8i-a83t-pinctrl
41 - allwinner,sun8i-a83t-r-pinctrl
42 - allwinner,sun8i-h3-pinctrl
43 - allwinner,sun8i-h3-r-pinctrl
44 - allwinner,sun8i-r40-pinctrl
45 - allwinner,sun8i-v3-pinctrl
46 - allwinner,sun8i-v3s-pinctrl
47 - allwinner,sun9i-a80-pinctrl
48 - allwinner,sun9i-a80-r-pinctrl
49 - allwinner,sun20i-d1-pinctrl
50 - allwinner,sun50i-a64-pinctrl
51 - allwinner,sun50i-a64-r-pinctrl
52 - allwinner,sun50i-a100-pinctrl
53 - allwinner,sun50i-a100-r-pinctrl
54 - allwinner,sun50i-h5-pinctrl
55 - allwinner,sun50i-h6-pinctrl
56 - allwinner,sun50i-h6-r-pinctrl
57 - allwinner,sun50i-h616-pinctrl
58 - allwinner,sun50i-h616-r-pinctrl
59 - allwinner,suniv-f1c100s-pinctrl
60 - nextthing,gr8-pinctrl
69 One interrupt per external interrupt bank supported on the
70 controller, sorted by bank number ascending order.
74 - description: Bus Clock
75 - description: High Frequency Oscillator
76 - description: Low Frequency Oscillator
78 clock-names:
80 - const: apb
81 - const: hosc
82 - const: losc
84 gpio-controller: true
85 interrupt-controller: true
86 gpio-line-names: true
88 input-debounce:
91 bank found in the controller
92 $ref: /schemas/types.yaml#/definitions/uint32-array
98 # - One node name can start with either s- or r- for PRCM nodes,
99 # - Then, the name itself can be any repetition of <string>- (to
100 # accommodate with nodes like uart4-rts-cts-pins), where each
103 # - Then, the bank name is optional and will be between pa and pg,
106 # - Finally, the name will end with either -pin or pins.
108 "^([rs]-)?(([a-z0-9]{3,}|[a-oq-z][a-z0-9]*?)?-)+?(p[a-ilm][0-9]*?-)??pins?$":
114 bias-disable: true
115 bias-pull-up: true
116 bias-pull-down: true
118 drive-strength:
123 - pins
124 - function
128 "^vcc-p[a-ilm]-supply$":
133 - "#gpio-cells"
134 - compatible
135 - reg
136 - clocks
137 - clock-names
138 - gpio-controller
141 # FIXME: We should have the pin bank supplies here, but not a lot of
145 - $ref: pinctrl.yaml#
146 - if:
151 - allwinner,sun50i-h616-r-pinctrl
155 - "#interrupt-cells"
156 - interrupts
157 - interrupt-controller
159 - if:
163 - allwinner,sun50i-h616-pinctrl
170 - if:
174 - allwinner,sun50i-a100-pinctrl
182 - if:
186 - allwinner,sun20i-d1-pinctrl
194 - if:
198 - allwinner,sun9i-a80-pinctrl
206 - if:
210 - allwinner,sun6i-a31-pinctrl
211 - allwinner,sun6i-a31s-pinctrl
212 - allwinner,sun50i-h6-pinctrl
220 - if:
224 - allwinner,sun8i-a23-pinctrl
225 - allwinner,sun8i-a83t-pinctrl
226 - allwinner,sun50i-a64-pinctrl
227 - allwinner,sun50i-h5-pinctrl
228 - allwinner,suniv-f1c100s-pinctrl
236 - if:
240 - allwinner,sun6i-a31-r-pinctrl
241 - allwinner,sun8i-a33-pinctrl
242 - allwinner,sun8i-h3-pinctrl
243 - allwinner,sun8i-v3-pinctrl
244 - allwinner,sun8i-v3s-pinctrl
245 - allwinner,sun9i-a80-r-pinctrl
246 - allwinner,sun50i-h6-r-pinctrl
254 - if:
258 - allwinner,sun4i-a10-pinctrl
259 - allwinner,sun5i-a10s-pinctrl
260 - allwinner,sun5i-a13-pinctrl
261 - allwinner,sun7i-a20-pinctrl
262 - allwinner,sun8i-a23-r-pinctrl
263 - allwinner,sun8i-a83t-r-pinctrl
264 - allwinner,sun8i-h3-r-pinctrl
265 - allwinner,sun8i-r40-pinctrl
266 - allwinner,sun50i-a64-r-pinctrl
267 - allwinner,sun50i-a100-r-pinctrl
268 - nextthing,gr8-pinctrl
279 - |
280 #include <dt-bindings/clock/sun5i-ccu.h>
283 compatible = "allwinner,sun5i-a13-pinctrl";
287 clock-names = "apb", "hosc", "losc";
288 gpio-controller;
289 interrupt-controller;
290 #interrupt-cells = <3>;
291 #gpio-cells = <3>;
293 uart1_pe_pins: uart1-pe-pins {
298 uart1_pg_pins: uart1-pg-pins {