Lines Matching +full:tse +full:- +full:mdio

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/net/altr,tse.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Altera Triple Speed Ethernet MAC driver (TSE)
10   - Maxime Chevallier <maxime.chevallier@bootlin.com>
15       - const: altr,tse-1.0
16       - const: ALTR,tse-1.0
18       - const: altr,tse-msgdma-1.0
23   interrupt-names:
25       - const: rx_irq
26       - const: tx_irq
28   rx-fifo-depth:
33   tx-fifo-depth:
38   altr,has-supplementary-unicast:
41       If present, TSE supports additional unicast addresses.
43   altr,has-hash-multicast-filter:
46       If present, TSE supports hash based multicast filter.
48   mdio:
49     $ref: mdio.yaml#
52       Creates and registers an MDIO bus.
56         const: altr,tse-mdio
59       - compatible
62   - compatible
63   - reg
64   - interrupts
65   - rx-fifo-depth
66   - tx-fifo-depth
69   - $ref: ethernet-controller.yaml#
70   - if:
75               - altr,tse-1.0
76               - ALTR,tse-1.0
81         reg-names:
83             - const: control_port
84             - const: rx_csr
85             - const: tx_csr
86             - const: s1
88   - if:
93               - altr,tse-msgdma-1.0
99         reg-names:
102             - const: control_port
103             - const: rx_csr
104             - const: rx_desc
105             - const: rx_resp
106             - const: tx_csr
107             - const: tx_desc
108             - const: pcs
113   - |
115         compatible = "altr,tse-msgdma-1.0";
123         reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc", "pcs";
124         interrupt-parent = <&intc>;
126         interrupt-names = "rx_irq","tx_irq";
127         rx-fifo-depth = <2048>;
128         tx-fifo-depth = <2048>;
129         max-frame-size = <1500>;
130         local-mac-address = [ 00 00 00 00 00 00 ];
131         altr,has-supplementary-unicast;
132         altr,has-hash-multicast-filter;
134         phy-mode = "sgmii";
135         managed = "in-band-status";
137   - |
139         compatible = "altr,tse-msgdma-1.0";
146         reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
147         interrupt-parent = <&hps_0_arm_gic_0>;
149         interrupt-names = "rx_irq", "tx_irq";
150         rx-fifo-depth = <2048>;
151         tx-fifo-depth = <2048>;
152         max-frame-size = <1500>;
153         local-mac-address = [ 00 00 00 00 00 00 ];
154         phy-mode = "gmii";
155         altr,has-supplementary-unicast;
156         altr,has-hash-multicast-filter;
157         phy-handle = <&phy1>;
158         mdio {
159             compatible = "altr,tse-mdio";
160             #address-cells = <1>;
161             #size-cells = <0>;
162             phy1: ethernet-phy@1 {