Lines Matching +full:feedback +full:- +full:pin

4 standard regulator properties, they must belong to a sub-node, called
9 - compatible		: must be "ams,as3711"
10 - reg			: specifies the I2C address
14 - su1-dev		: framebuffer phandle
15 - su1-max-uA		: maximum current
19 - su2-dev		: framebuffer phandle
20 - su1-max-uA		: maximum current
23 feedback used:
24 - su2-feedback-voltage	: voltage feedback is used
25 - su2-feedback-curr1	: CURR1 input used for current feedback
26 - su2-feedback-curr2	: CURR2 input used for current feedback
27 - su2-feedback-curr3	: CURR3 input used for current feedback
28 - su2-feedback-curr-auto: automatic current feedback selection
30 and one of these to select the over-voltage protection pin
31 - su2-fbprot-lx-sd4	: LX_SD4 is used for over-voltage protection
32 - su2-fbprot-gpio2	: GPIO2 is used for over-voltage protection
33 - su2-fbprot-gpio3	: GPIO3 is used for over-voltage protection
34 - su2-fbprot-gpio4	: GPIO4 is used for over-voltage protection
36 If "su2-feedback-curr-auto" is selected, one or more of the following properties
38 - su2-auto-curr1	: use CURR1 input for current feedback
39 - su2-auto-curr2	: use CURR2 input for current feedback
40 - su2-auto-curr3	: use CURR3 input for current feedback
50 			regulator-name = "1.215V";
51 			regulator-min-microvolt = <1215000>;
52 			regulator-max-microvolt = <1235000>;
55 			regulator-name = "2.8V CPU";
56 			regulator-min-microvolt = <2800000>;
57 			regulator-max-microvolt = <2800000>;
58 			regulator-always-on;
59 			regulator-boot-on;
64 		compatible = "ams,as3711-bl";
65 		su2-dev = <&lcdc>;
66 		su2-max-uA = <36000>;
67 		su2-feedback-curr-auto;
68 		su2-fbprot-gpio4;
69 		su2-auto-curr1;
70 		su2-auto-curr2;
71 		su2-auto-curr3;