Lines Matching +full:preserve +full:- +full:clocking
5 - reg : Offset and length of the register set for the device
6 - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a
9 "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
13 - interrupts : <a b> where a is the interrupt number and b is a
18 - fsl,preserve-clocking : boolean; if defined, the clock settings
20 - clock-frequency : desired I2C bus clock frequency in Hz.
21 - fsl,timeout : I2C bus timeout in microseconds.
27 #address-cells = <1>;
28 #size-cells = <0>;
29 compatible = "fsl,mpc5121-i2c", "fsl-i2c";
32 interrupt-parent = <&ipic>;
33 clock-frequency = <100000>;
37 compatible = "fsl,mpc5121-i2c-ctrl";
43 #address-cells = <1>;
44 #size-cells = <0>;
45 compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
48 interrupt-parent = <&mpc5200_pic>;
49 fsl,preserve-clocking;
54 #address-cells = <1>;
55 #size-cells = <0>;
56 compatible = "fsl,mpc8544-i2c", "fsl-i2c";
59 interrupt-parent = <&mpic>;
60 clock-frequency = <400000>;