Lines Matching +full:auto +full:- +full:sleep +full:- +full:disabled

93 to store jail-specific configuration options.
120 .Bl -tag -width indent-two
269 auto-jail the service with inherited filesystem and other
323 disable auto-loading of kernel modules with
327 A whitespace-separated list of kernel modules to be ignored by
341 A whitespace-separated list of kernel modules to be ignored by
345 A whitespace-separated list of kernel modules to load right after
381 A semi-colon
408 Enable auto-jailing of all services which are not explicitly
435 .Dq Li "-S" ,
466 .Dq Li "-S" ,
522 .Pa /var/db/mtree/BSD.var-run.mtree .
567 .Pa machine-id
582 .Dq Li -r
587 .Pa machine-id
589 .Pa /etc/machine-id .
636 This behavior can be overridden on a per-interface basis by replacing
675 .Bl -tag -width ".Li workstation" -compact
679 all IP services disabled, except via
729 .\" ----- firewall_nat_enable setting --------------------------------
795 .\" -------------------------------------------------------------------
874 .\" ----- ipfilter_enable setting --------------------------------
887 .Bd -literal
917 .Bd -literal
924 .\" ----- ipfilter_program setting ------------------------------
931 .\" ----- ipfilter_rules setting --------------------------------
941 .\" ----- ipfilter_flags setting --------------------------------
948 .\" ----- ipnat_enable setting ----------------------------------
962 .\" ----- ipnat_program setting ---------------------------------
969 .\" ----- ipnat_rules setting -----------------------------------
980 .\" ----- ipnat_flags setting -----------------------------------
987 .\" ----- ipmon_enable setting ----------------------------------
1010 .\" ----- ipmon_program setting ---------------------------------
1017 .\" ----- ipmon_flags setting -----------------------------------
1021 .Dq Li -Ds
1035 .Bd -literal
1038 .\" ----- ipfs_enable setting -----------------------------------
1068 .\" ----- ipfs_program setting ----------------------------------
1075 .\" ----- ipfs_flags setting ------------------------------------
1082 .\" ----- end of added ipf hook ---------------------------------
1152 .Pa /etc/pf-fallback.conf ) .
1161 .Bd -literal
1218 is set, for each whitespace-separated
1243 .Xr ftp-proxy 8
1251 .Xr ftp-proxy 8
1257 .Xr ftp-proxy 8
1260 should contain a whitespace-separated list of instance names.
1265 should be defined, containing the command-line flags to be passed to the
1266 .Xr ftp-proxy 8
1374 .Dq Li AUTO
1400 the log messages are not rate-limited, so this option should only be used
1432 .Dq Li AUTO
1449 .Dq Li .-/+
1460 as well as special case-insensitive keywords described below.
1466 .Bd -literal
1484 .Bd -literal
1490 Inter-Domain Routing
1494 .Li inet 192.0.2.5-23/24
1496 .Li inet6 2001:db8:1-f::1/64 .
1509 .Bd -literal
1514 .Li 192.0.2.5-23/24 ,
1516 addresses 192.0.2.6 to 192.0.2.23 with the non-conflicting prefix length /32 as
1528 .Bd -literal
1530 ifconfig_em0_alias3="inet 192.0.2.1-5/28"
1551 .Bd -literal
1570 .Bd -literal
1616 .Bd -literal
1626 .Bd -literal
1670 .Dq Li AUTO .
1681 .Bd -literal
1702 .Pa /etc/hostapd- Ns Ao Ar interface Ac Ns .conf
1714 .Bd -literal
1729 .Bd -literal
1762 will be IPv6-preferred.
1768 will be IPv4-preferred.
1771 This controls initial configuration on IPv6-capable
1791 is completely disabled to enforce a security policy.
1798 for an IPv6-capable interface should be sufficient.
1804 flag can be disabled by setting this variable to
1833 .Dq inet6 -no_radr accept_rtadv
1850 routes into the Default Router List will be disabled by
1885 daemon using its MIB-2 module.
1903 .Bd -literal
1919 Note that a link-local address will be automatically configured in
1920 addition to the configured global-scope addresses because the IPv6
1929 If only a link-local address is needed on the interface,
1931 .Bd -literal
1935 A link-local address can also be configured manually.
1940 .Bd -literal
1947 addresses based on each prefix and the EUI-64 interface index will be
1954 .Bd -literal
1959 .Bd -literal
1966 These Subnet-Router anycast addresses will be added only when
1987 .Dq Li AUTO .
1995 installs a pre-defined policy table described in Section 10.3
1996 .Pq IPv4-preferred
1998 .Pq IPv6-preferred
2002 .Dq Li AUTO
2014 the IPv6-preferred one is used.
2015 Otherwise IPv4-preferred.
2024 .Dq Li AUTO ,
2085 .Bd -literal
2103 Also used for per-profile overrides of
2110 .Dq Li .-/+
2126 .Dq Li auto ,
2185 A space-separated list of ZFS pool names for which new pool GUIDs should be
2191 A space-separated list of ZFS pool names for which the version should be
2222 Number of times user is asked for the pass-phrase.
2251 is remounted as read-write if this is set to
2253 Diskless systems that mount their root file system from a read-only remote
2276 The amount of time in seconds to sleep before starting a background
2294 List of file system types that are network-based.
2309 a whitespace-separated list of network file system descriptor pairs,
2312 and a human-readable, one-word description,
2456 the Kerberos 5 Password-Changing Daemon; set to
2465 this is the path to Kerberos 5 Password-Changing Daemon.
2520 A value of 2-10 seconds will substantially reduce network
2568 daemon, which is needed for NFS-over-TLS NFS mounts.
2577 to support NFS-over-TLS NFS mounts.
2641 allow services like PCNFSD to make non-privileged mount
2784 A whitespace-separated list of NTP servers to synchronize with at startup.
3000 .Dq Nm arp Cm -S
3003 .Bd -literal
3016 .Dq Nm ndp Cm -s
3019 .Bd -literal
3038 .Bd -literal
3040 route_ext="-net 10.0.0.0/24 -gateway 192.168.0.1"
3041 route_mcast="-net 224.0.0.0/4 -iface gif0"
3042 route_gif0local="-host 169.254.1.1 -iface lo0"
3134 You may want to fine-tune
3156 source-routed packets are forwarded.
3161 the system will accept source-routed packets directed at it.
3204 An effective value is 0-31.
3210 .Dq Li AUTO .
3264 If set to a non-null string, the virtual console's keyboard input is
3390 .Dq Li auto
3399 .Dq Li auto
3405 .Dq Li auto
3411 .Dq Li auto
3414 .Bl -tag -width ".Li x10mouseremote" -compact
3490 daemon is started for a non-default port, the
3496 is the name of the non-default port, i.e.,\&
3504 .Dq Li "-3"
3518 .Li 0xd0 Ns - Ns Li 0xd3
3625 .Dq Li -d ,
3632 .Dq Li AUTO ,
3712 .Dq Li "-a" ,
3725 .Dq Li "-a" ,
3738 .Dq Li "-a" ,
3802 Set to the list of 32-bit compatibility shared library paths to
3824 Set to the list of local 32-bit compatibility
3840 ranges from \-1 (the compile time default) to 3 (the
3884 as a stand-alone daemon at system boot time.
3935 This timeout will not be set when returning to the single-user mode
3959 Pairs of already-mounted
4040 A space-delimited list of jail names.
4060 Note that older releases supported per-jail configuration via
4068 These per-jail configuration variables are now obsolete in favor of
4072 when per-jail configuration variables are defined,
4078 The following per-jail parameters are handled by
4086 They must be a semi-colon
4094 .Bl  -tag -width "host.hostname" -offset indent
4186 .\" -----------------------------------------------------
4189 Set to a bit-mask
4228 .Pa /var/db/entropy-file
4252 .Nm save-entropy
4257 .Nm save-entropy
4344 .Dq Li -CN ,
4430 .Bd -literal
4446 .Bd -literal
4520 Also used to specify per-profile overrides.
4522 .Dq Li .-/+
4553 if it should register Dial-Up Networking service on the specified
4588 delays the start of network-reliant services until
4607 This variable contains a space-delimited list of IP addresses to
4637 polled at a 1-second interval.
4661 A space-separated list of configuration files used by
4736 .Dq Li -Aa ,
4770 enable auto-loading of encryption keys for encrypted ZFS datasets.
4782 A whitespace-separated list of ZFS datasets to unlock.
4874 a localhost-only listening SMTP service required for running
4876 as a non-set-user-ID binary.
4951 parent (if you allow child-jails in your jails, service jails
4960 .Bl -tag -width indent-two
5001 All non-network options can be combined with all other options.
5010 .Va svcj- Ns Ar name .
5042 .Bl -tag -width "/etc/defaults/rc.conf" -compact