Lines Matching +full:slave +full:- +full:mode

30 .Nd driver for DataFlash(tm) non-volatile storage devices
35 .Bd -ragged -offset indent
42 .Bd -literal -offset indent
48 driver provides support for the family of non-volatile storage
75 .Bl -bullet -compact
100 device is defined as a slave device subnode
107 The most commonly-used ones are documented below.
112 .Bl -tag -width indent
117 .It Va spi-max-frequency
118 The maximum bus frequency to use when communicating with this slave device.
126 .Bl -tag -width indent
131 .It Va spi-cpha
132 Empty property indicating the slave device requires shifted clock
133 phase (CPHA) mode.
134 .It Va spi-cpol
135 Empty property indicating the slave device requires inverse clock
136 polarity (CPOL) mode.
137 .It Va spi-cs-high
138 Empty property indicating the slave device requires chip select active high.
147 .Bl -tag -width indent
157 The chip-select number to assert when performing I/O for this device.
159 .It Va hint.at45d.%d.mode
160 The SPI mode (0-3) to use when communicating with this device.
167 .Bl -tag -width /dev/flash/at45d?