Lines Matching +full:background +full:- +full:layer
4 This document describe how the IEEE 802.11u Interworking and Wi-Fi
7 GUI or Wi-Fi framework) is used to manage this functionality.
10 Introduction to Wi-Fi Hotspot 2.0
11 ---------------------------------
13 Hotspot 2.0 is the name of the Wi-Fi Alliance specification that is used
14 in the Wi-Fi CERTIFIED Passpoint<TM> program. More information about
17 http://www.wi-fi.org/knowledge-center/white-papers/wi-fi-certified-passpoint%E2%84%A2-new-program-w…
20 https://www.wi-fi.org/knowledge-center/published-specifications
23 standardized in IEEE Std 802.11u-2011 which is now part of the IEEE Std
24 802.11-2012.
28 --------------------------------
32 network blocks (e.g., per-SSID parameters). When requested to perform
53 ----------------------------
69 There are number of run-time configuration parameters (e.g., in
102 Credentials can be pre-configured for automatic network selection:
135 # (EAP-TLS). Full path to the file should be used since working
136 # directory may change when wpa_supplicant is run in the background.
146 # in the background.
166 # imsi: IMSI in <MCC> | <MNC> | '-' | <MSIN> format
172 # This field is used with EAP-SIM/AKA/AKA' to encrypt the permanent
174 # include a 2048-bit RSA public key and this is from the operator who
177 # This field is used to help the EAP-SIM/AKA/AKA' server to identify
189 # top-level domain and all the labels in @domain_suffix_match shall be
191 # sub-level labels in addition to the required labels.
194 # test.example.com but would not match test-example.com.
207 # need to be pre-configured with the credentials since the NAI Realm
222 # If roaming_consortium_len is non-zero, this field contains the
227 # pre-configured with the credential since the NAI Realm information
232 # If required_roaming_consortium_len is non-zero, this field contains the
245 # eap: Pre-configured EAP method
250 # phase1: Pre-configure Phase 1 (outer authentication) parameters
253 # phase2: Pre-configure Phase 2 (inner authentication) parameters
265 # (non-exact match means any subdomain matches the entry; priority is in
273 # the credential to find the PPS MO (./Wi-Fi/<provisioning_sp>).
278 # provisioning_sp value). The range of this priority is 0-255 with 0
305 # Format: <protocol>[:<comma-separated list of ports]
318 # sim_num: Identifier for which SIM to use in multi-SIM devices
338 # imsi="310026-000000000"
356 -----------------
392 > set_cred 1 imsi "23456-0000000000"
408 > set_cred 1 imsi "23456-0000000000"
414 Add a WPA2-Enterprise network:
418 > set_network 0 key_mgmt WPA-EAP
432 > enable_network 0 no-connect
442 > set_network 3 ssid "coffee-shop"
462 <3>RX-ANQP 02:00:00:00:01:00 ANQP Capability list
463 <3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
464 <3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
466 <3>INTERWORKING-AP 02:00:00:00:01:00 type=unknown
469 INTERWORKING-AP event messages indicate the APs that support network
477 <3>CTRL-EVENT-SCAN-RESULTS
481 <3>CTRL-EVENT-EAP-STARTED EAP authentication started
482 <3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21
483 <3>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
484 <3>CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
486 <3>CTRL-EVENT-CONNECTED - Connection to 02:00:00:00:01:00 completed (auth) [id=0 id_str=]
497 WPA-EAP
509 <3>CTRL-EVENT-DISCONNECTED bssid=02:00:00:00:01:00 reason=1 locally_generated=1
513 <3>RX-ANQP 02:00:00:00:01:00 ANQP Capability list
514 <3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
515 <3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
517 <3>INTERWORKING-AP 02:00:00:00:01:00 type=unknown
518 <3>CTRL-EVENT-SCAN-RESULTS
522 <3>CTRL-EVENT-EAP-STARTED EAP authentication started
523 <3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21
524 <3>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
525 <3>CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
527 <3>CTRL-EVENT-CONNECTED - Connection to 02:00:00:00:01:00 completed (reauth) [id=0 id_str=]
537 pairwise_cipher=CCMP <--- link layer security indication
543 hs20=1 <--- HS 2.0 indication
547 selectedMethod=21 (EAP-TTLS)
548 EAP TLS cipher=AES-128-SHA
549 EAP-TTLSv0 Phase2 method=PAP
554 ssid=coffee-shop
566 command output. Link layer security is indicated with the
574 02:00:00:00:01:00 2412 -30 [WPA2-EAP-CCMP][ESS][HS20] Example Network
586 noise=-92
587 level=-30
591 flags=[WPA2-EAP-CCMP][ESS][HS20]
601 <3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
604 <3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
611 <3>CTRL-EVENT-SCAN-RESULTS
615 <3>RX-ANQP 02:00:00:00:01:00 ANQP Capability list
616 <3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
617 <3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
622 ----------------------------------------
625 link-layer protected Hotspot 2.0 online signup connection with
628 ANQP-element.
636 eap=WFA-UNAUTH-TLS
638 ca_cert="osu-ca.pem"
644 ------------------------------------------------------
657 ssid="test-hs20"
659 key_mgmt=WPA-EAP
662 identity="hs20-test@example.com"
674 list ANQP-element: