Lines Matching full:dd
23 …dd>In broadcast and multicast modes, means are required to determine the network delay between t…
26 …dd>This command specifies the complete path and name of the file used to record the frequency of t…
27 …dd> If the file exists, it is read at startup in order to set the initial frequency and then updat…
28 …dd>The file format consists of a single line containing a single floating point number, which reco…
30 …dd>This command specifies the Differentiated Services Code Point (DSCP) value that is used in sent…
34 …<dd>Provides a way to enable or disable various system options. Flags not mentioned are unaffected…
37 …dd>Enables the server to synchronize with unconfigured peers only if the peer has been correctly a…
39 …dd>Enables the server to listen for a message from a broadcast or multicast server, as in the <tt>…
41 … <dd>Enables the calibrate feature for reference clocks. The default for this flag is disable.</dd>
43 …<dd>Enables the kernel time discipline, if available. The default for this flag is enable if suppo…
45 …dd>Enables processing of NTP mode 7 implementation-specific requests which are used by the depreca…
47 …<dd>Enables the monitoring facility. See the <a href="ntpq.html"><tt>ntpq</tt> program</a> and the…
48 …"><tt>limited</tt></a> in any <tt>restrict</tt> commands. The default for this flag is enable.</dd>
50 …dd>Enables time and frequency discipline. In effect, this switch opens and closes the feedback loo…
52 …dd>Enables the statistics facility. See the <a href="monopt.html">Monitoring Options</a> page for …
55 …dd>Enables the early resetting of an association in case of a crypto failure. This is generally a…
57 …dd>Enables the early resetting of an association in case of a crypto_NAK message. This is general…
59 …dd>Enables the early resetting of an association in case of an autokey digest failur. This is gen…
61 </dd>
63 …dd>This command allows additional configuration commands to be included from a separate file. Incl…
65 …dd>This command controls which network addresses <tt>ntpd</tt> opens, and whether input is dropped…
67 …<dd>This command loads the IERS leapseconds file and initializes the leapsecond values for the nex…
68 …hash line in the file to be valid. Files without any hash signature are lodaed in both cases.</dd>
69 …dd>The <i>leapfile</i> is scanned when <tt>ntpd</tt> processes the <tt>leapfile</tt> directive or …
70 …dd>While not strictly a security function, the Autokey protocol provides means to securely retriev…
72 …dd>This EXPERIMENTAL option is only available if <tt>ntpd</tt> was built with the <tt>--enable-lea…
74 …dd>This command controls the amount and type of output written to the system <tt>syslog</tt> facil…
75 …dd>Configuration keywords are formed by concatenating the message class with the event class. The …
76 <dd>Thus, a minimal log configuration could look like this:</dd>
77 <dd><tt>logconfig=syncstatus +sysevents</tt></dd>
78 …dd>This would just list the synchronizations state of <tt>ntpd</tt> and the major system events. F…
79 <dd><tt>logconfig=syncall +clockall</tt></dd>
80 …dd>This configuration will list all clock information and synchronization information. All other e…
82 …dd>This command specifies the location of an alternate log file to be used instead of the default …
84 …<dd>Controls size limits of the monitoring facility Most Recently Used <a href="ntpq.html#mrulist"…
88 …<dd>Equivalent upper limits on the size of the MRU list, in terms of entries or kilobytes. The act…
89 …</tt> and <tt>maxmem</tt> are used, the last one used controls. The default is 1024 kilobytes.</dd>
91 …<dd>Lower limit on the MRU list size. When the MRU list has fewer than <tt>mindepth</tt> entries, …
92 The default is 600 entries.</dd>
94 …<dd>Once the MRU list has <tt>mindepth</tt> entries and an additional client address is to be adde…
96 is grown, subject to <tt>maxdepth</tt>/<tt>maxmem</tt>. The default is 64 seconds.</dd>
99 …<dd>Initial memory allocation at the time the monitoring facility is first enabled, in terms of en…
102 …<dd>Size of additional memory allocations when growing the MRU list, in entries or kilobytes. The …
104 </dd>
106 …dd>Specify the <i><tt>threshold</tt></i> in seconds to write the frequency file, with default of 1…
108 …<dd>This command is used in conjunction with the ACTS modem driver (type 18) or the JJY driver (ty…
111 …nbsp;is normally prepended to the number, which can contain other modem control codes as well.</dd>
114 <dd>Enable skewing of our poll requests to our servers.
126 With no arguments, internally specified default values are chosen.</dd>
128 …<dd>Reset one or more groups of counters maintained by ntpd and exposed by <tt>ntpq</tt> and <tt>n…
130 …<dd>This command alters certain process storage allocation limits, and is only available on some o…
131 <dd>
134 …dd>Specify the number of megabytes of memory that should be allocated and locked. Probably only a…
136 …dd>Specifies the maximum size of the process stack on systems with the <tt>mlockall()</tt> functio…
138 …<dd>Specifies the maximum number of file descriptors ntp may have open at the same time. Defaults …
140 </dd>
142 …dd>Specify the directory in which to write configuration snapshots requested with <tt>ntpq</tt>'s …
144 …dd>This command adds an additional system variable. These variables can be used to distribute addi…
146 …dd>This command alters certain system variables used by the clock discipline algorithm. The defaul…
147 <dd>
150 …<dd>Specifies the Allan intercept, which is a parameter of the PLL/FLL clock discipline algorithm,…
152 … <dd>Specifies the dispersion increase rate in parts-per-million (PPM) with default 15 PPM.</dd>
154 …<dd>Specifies the frequency offset in parts-per-million (PPM). This option is mutually exclusive w…
156 …dd>Specifies the huff-n'-puff filter span, which determines the most recent interval the algorithm…
158 …dd>Specifies the panic threshold in seconds with default 1000 s. If set to zero, the panic sanity …
160 …<dd>Specifies the step threshold in seconds. The default without this command is 0.128 s. If set t…
161 s. Further details are on the <a href="clock.html">Clock State Machine</a> page.</dd>
163 …dd>Specifies the stepout threshold in seconds. The default without this command is 300 s. Since th…
165 </dd>
167 …dd>This command alters certain system variables used by the the clock selection and clustering alg…
168 <dd>
171 …<dd>Set NTP and GPS era anchor. <tt><i>date</i></tt> is either a date in ISO8601 format (<i>YYYY-M…
175 </dd>
177 …dd>This option will cause the client to delay believing backward time steps from a broadcast serve…
179 …dd>The manycast server sends packets at intervals of 64 s if less than <tt>maxclock</tt> servers a…
181 …dd>Specify the maximum stratum (exclusive) for acceptable server packets. The default is 16. See t…
183 …dd>Specify whether (1) or whether not (0) a server packet will be accepted for the same stratum as…
185 …dd>Specify the minimum stratum (inclusive) for acceptable server packets. The default is 1. See th…
187 …dd>Specify the maximum number of servers retained by the server discovery schemes. The default is …
189 …dd>Specify the synchronization distance threshold used by the clock selection algorithm. The defau…
191 …dd>Specify the number of servers used by the clustering algorithm as the minimum to include on the…
193 <dd>Specify the minimum distance used by the selection and anticlockhop
198 always nonempty.</dd>
200 …dd>Specify the number of servers used by the selection algorithm as the minimum to set the system …
202 …dd>Specify the orphan stratum with default 16. If less than 16 this is the stratum assumed by the …
204 …dd>Specify the delay in seconds from the time all sources are lost until orphan parent mode is ena…
206 </dd>
208 …dd>This command configures a trap receiver at the given host address and port number for sending m…
209 …dd>The trap receiver will generally log event messages and other information from the server in a …
211 …dd>This command specifies a list of TTL values in increasing order. up to 8 values can be specifie…