Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
"ARM:

- Move a lot of state that was previously stored on a per vcpu basis
into a pe

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
"ARM:

- Move a lot of state that was previously stored on a per vcpu basis
into a per-CPU area, because it is only pertinent to the host while
the vcpu is loaded. This results in better state tracking, and a
smaller vcpu structure.

- Add full handling of the ERET/ERETAA/ERETAB instructions in nested
virtualisation. The last two instructions also require emulating
part of the pointer authentication extension. As a result, the trap
handling of pointer authentication has been greatly simplified.

- Turn the global (and not very scalable) LPI translation cache into
a per-ITS, scalable cache, making non directly injected LPIs much
cheaper to make visible to the vcpu.

- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!

- Allocate PPIs and SGIs outside of the vcpu structure, allowing for
smaller EL2 mapping and some flexibility in implementing more or
less than 32 private IRQs.

- Purge stale mpidr_data if a vcpu is created after the MPIDR map has
been created.

- Preserve vcpu-specific ID registers across a vcpu reset.

- Various minor cleanups and improvements.

LoongArch:

- Add ParaVirt IPI support

- Add software breakpoint support

- Add mmio trace events support

RISC-V:

- Support guest breakpoints using ebreak

- Introduce per-VCPU mp_state_lock and reset_cntx_lock

- Virtualize SBI PMU snapshot and counter overflow interrupts

- New selftests for SBI PMU and Guest ebreak

- Some preparatory work for both TDX and SNP page fault handling.

This also cleans up the page fault path, so that the priorities of
various kinds of fauls (private page, no memory, write to read-only
slot, etc.) are easier to follow.

x86:

- Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state.

This is a state where the mmu_lock is held for reading but
concurrent accesses to the PTE have to spin; shortening its use
allows other vCPUs to repopulate the zapped region while the zapper
finishes tearing down the old, defunct page tables.

- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
field, which is defined by hardware but left for software use.

This lets KVM communicate its inability to map GPAs that set bits
51:48 on hosts without 5-level nested page tables. Guest firmware
is expected to use the information when mapping BARs; this avoids
that they end up at a legal, but unmappable, GPA.

- Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.

- As usual, a bunch of code cleanups.

x86 (AMD):

- Implement a new and improved API to initialize SEV and SEV-ES VMs,
which will also be extendable to SEV-SNP.

The new API specifies the desired encryption in KVM_CREATE_VM and
then separately initializes the VM. The new API also allows
customizing the desired set of VMSA features; the features affect
the measurement of the VM's initial state, and therefore enabling
them cannot be done tout court by the hypervisor.

While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
once the VMSA has been encrypted. Also, the FPU and AVX state will
be synchronized and encrypted too.

- Support for GHCB version 2 as applicable to SEV-ES guests.

This, once more, is only accessible when using the new
KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.

x86 (Intel):

- An initial bunch of prerequisite patches for Intel TDX were merged.

They generally don't do anything interesting. The only somewhat
user visible change is a new debugging mode that checks that KVM's
MMU never triggers a #VE virtualization exception in the guest.

- Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
VM-Exit to L1, as per the SDM.

Generic:

- Use vfree() instead of kvfree() for allocations that always use
vcalloc() or __vcalloc().

- Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the
KVM tree.

The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever
since calls to set_pte_at_notify were wrapped with
invalidate_range_start and invalidate_range_end... in 2012.

Selftests:

- Enhance the demand paging test to allow for better reporting and
stressing of UFFD performance.

- Convert the steal time test to generate TAP-friendly output.

- Fix a flaky false positive in the xen_shinfo_test due to comparing
elapsed time across two different clock domains.

- Skip the MONITOR/MWAIT test if the host doesn't actually support
MWAIT.

- Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
shell script, to play nice with running in a minimal userspace
environment.

- Allow skipping the RSEQ test's sanity check that the vCPU was able
to complete a reasonable number of KVM_RUNs, as the assert can fail
on a completely valid setup.

If the test is run on a large-ish system that is otherwise idle,
and the test isn't affined to a low-ish number of CPUs, the vCPU
task can be repeatedly migrated to CPUs that are in deep sleep
states, which results in the vCPU having very little net runtime
before the next migration due to high wakeup latencies.

- Define _GNU_SOURCE for all selftests to fix a warning that was
introduced by a change to kselftest_harness.h late in the 6.9
cycle, and because forcing every test to #define _GNU_SOURCE is
painful.

- Provide a global pseudo-RNG instance for all tests, so that library
code can generate random, but determinstic numbers.

- Use the global pRNG to randomly force emulation of select writes
from guest code on x86, e.g. to help validate KVM's emulation of
locked accesses.

- Allocate and initialize x86's GDT, IDT, TSS, segments, and default
exception handlers at VM creation, instead of forcing tests to
manually trigger the related setup.

Documentation:

- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
selftests/kvm: remove dead file
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: SEV: Allow per-guest configuration of GHCB protocol version
KVM: SEV: Add GHCB handling for termination requests
KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
KVM: SEV: Add support to handle AP reset MSR protocol
KVM: x86: Explicitly zero kvm_caps during vendor module load
KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
KVM: x86: Fully re-initialize supported_vm_types on vendor module load
KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
...

show more ...

Merge tag 'kvm-x86-selftests_utils-6.10' of https://github.com/kvm-x86/linux into HEAD

KVM selftests treewide updates for 6.10:

- Define _GNU_SOURCE for all selftests to fix a warning that was int

Merge tag 'kvm-x86-selftests_utils-6.10' of https://github.com/kvm-x86/linux into HEAD

KVM selftests treewide updates for 6.10:

- Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
every test to #define _GNU_SOURCE is painful.

- Provide a global psuedo-RNG instance for all tests, so that library code can
generate random, but determinstic numbers.

- Use the global pRNG to randomly force emulation of select writes from guest
code on x86, e.g. to help validate KVM's emulation of locked accesses.

- Rename kvm_util_base.h back to kvm_util.h, as the weird layer of indirection
was added purely to avoid manually #including ucall_common.h in a handful of
locations.

- Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
handlers at VM creation, instead of forcing tests to manually trigger the
related setup.

show more ...

Merge tag 'kvmarm-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 updates for Linux 6.10

- Move a lot of state that was previously stored on a per vcpu

Merge tag 'kvmarm-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 updates for Linux 6.10

- Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.

- Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greattly simplified.

- Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.

- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!

- Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.

- Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.

- Preserve vcpu-specific ID registers across a vcpu reset.

- Various minor cleanups and improvements.

show more ...

Merge branch kvm-arm64/lpi-xa-cache into kvmarm-master/next

* kvm-arm64/lpi-xa-cache:
: .
: New and improved LPI translation cache from Oliver Upton.
:
: From the cover letter:
:
: "As d

Merge branch kvm-arm64/lpi-xa-cache into kvmarm-master/next

* kvm-arm64/lpi-xa-cache:
: .
: New and improved LPI translation cache from Oliver Upton.
:
: From the cover letter:
:
: "As discussed [*], here is the new take on the LPI translation cache,
: migrating to an xarray indexed by (devid, eventid) per ITS.
:
: The end result is quite satisfying, as it becomes possible to rip out
: other nasties such as the lpi_list_lock. To that end, patches 2-6 aren't
: _directly_ related to the translation cache cleanup, but instead are
: done to enable the cleanups at the end of the series.
:
: I changed out my test machine from the last time so the baseline has
: moved a bit, but here are the results from the vgic_lpi_stress test:
:
: +----------------------------+------------+-------------------+
: | Configuration | v6.8-rc1 | v6.8-rc1 + series |
: +----------------------------+------------+-------------------+
: | -v 1 -d 1 -e 1 -i 1000000 | 2063296.81 | 1362602.35 |
: | -v 16 -d 16 -e 16 -i 10000 | 610678.33 | 5200910.01 |
: | -v 16 -d 16 -e 17 -i 10000 | 678361.53 | 5890675.51 |
: | -v 32 -d 32 -e 1 -i 100000 | 580918.96 | 8304552.67 |
: | -v 1 -d 1 -e 17 -i 1000 | 1512443.94 | 1425953.8 |
: +----------------------------+------------+-------------------+
:
: Unlike last time, no dramatic regressions at any performance point. The
: regression on a single interrupt stream is to be expected, as the
: overheads of SRCU and two tree traversals (kvm_io_bus_get_dev(),
: translation cache xarray) are likely greater than that of a linked-list
: with a single node."
: .
KVM: selftests: Add stress test for LPI injection
KVM: selftests: Use MPIDR_HWID_BITMASK from cputype.h
KVM: selftests: Add helper for enabling LPIs on a redistributor
KVM: selftests: Add a minimal library for interacting with an ITS
KVM: selftests: Add quadword MMIO accessors
KVM: selftests: Standardise layout of GIC frames
KVM: selftests: Align with kernel's GIC definitions
KVM: arm64: vgic-its: Get rid of the lpi_list_lock
KVM: arm64: vgic-its: Rip out the global translation cache
KVM: arm64: vgic-its: Use the per-ITS translation cache for injection
KVM: arm64: vgic-its: Spin off helper for finding ITS by doorbell addr
KVM: arm64: vgic-its: Maintain a translation cache per ITS
KVM: arm64: vgic-its: Scope translation cache invalidations to an ITS
KVM: arm64: vgic-its: Get rid of vgic_copy_lpi_list()
KVM: arm64: vgic-debug: Use an xarray mark for debug iterator
KVM: arm64: vgic-its: Walk LPI xarray in vgic_its_cmd_handle_movall()
KVM: arm64: vgic-its: Walk LPI xarray in vgic_its_invall()
KVM: arm64: vgic-its: Walk LPI xarray in its_sync_lpi_pending_table()
KVM: Treat the device list as an rculist

Signed-off-by: Marc Zyngier <maz@kernel.org>

show more ...

KVM: selftests: Define _GNU_SOURCE for all selftests code

Define _GNU_SOURCE is the base CFLAGS instead of relying on selftests to
manually #define _GNU_SOURCE, which is repetitive and error prone.

KVM: selftests: Define _GNU_SOURCE for all selftests code

Define _GNU_SOURCE is the base CFLAGS instead of relying on selftests to
manually #define _GNU_SOURCE, which is repetitive and error prone. E.g.
kselftest_harness.h requires _GNU_SOURCE for asprintf(), but if a selftest
includes kvm_test_harness.h after stdio.h, the include guards result in
the effective version of stdio.h consumed by kvm_test_harness.h not
defining asprintf():

In file included from x86_64/fix_hypercall_test.c:12:
In file included from include/kvm_test_harness.h:11:
../kselftest_harness.h:1169:2: error: call to undeclared function
'asprintf'; ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
1169 | asprintf(&test_name, "%s%s%s.%s", f->name,
| ^

When including the rseq selftest's "library" code, #undef _GNU_SOURCE so
that rseq.c controls whether or not it wants to build with _GNU_SOURCE.

Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423190308.2883084-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

show more ...

KVM: selftests: Use MPIDR_HWID_BITMASK from cputype.h

No need for a home-rolled definition, just rely on the common header.

Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.k

KVM: selftests: Use MPIDR_HWID_BITMASK from cputype.h

No need for a home-rolled definition, just rely on the common header.

Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-19-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch 'for-6.4/amd-sfh' into for-linus

- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)

Merge branch 'i2c/for-current' into i2c/for-mergewindow

This should have been in 6.3, but sadly I missed it.

Merge branches 'edac-drivers', 'edac-amd64' and 'edac-misc' into edac-updates

Combine all queued EDAC changes for submission into v6.4:

* ras/edac-drivers:
EDAC/i10nm: Add Intel Sierra Forest ser

Merge branches 'edac-drivers', 'edac-amd64' and 'edac-misc' into edac-updates

Combine all queued EDAC changes for submission into v6.4:

* ras/edac-drivers:
EDAC/i10nm: Add Intel Sierra Forest server support
EDAC/skx: Fix overflows on the DRAM row address mapping arrays

* ras/edac-amd64: (27 commits)
EDAC/amd64: Fix indentation in umc_determine_edac_cap()
EDAC/amd64: Add get_err_info() to pvt->ops
EDAC/amd64: Split dump_misc_regs() into dct/umc functions
EDAC/amd64: Split init_csrows() into dct/umc functions
EDAC/amd64: Split determine_edac_cap() into dct/umc functions
EDAC/amd64: Rename f17h_determine_edac_ctl_cap()
EDAC/amd64: Split setup_mci_misc_attrs() into dct/umc functions
EDAC/amd64: Split ecc_enabled() into dct/umc functions
EDAC/amd64: Split read_mc_regs() into dct/umc functions
EDAC/amd64: Split determine_memory_type() into dct/umc functions
EDAC/amd64: Split read_base_mask() into dct/umc functions
EDAC/amd64: Split prep_chip_selects() into dct/umc functions
EDAC/amd64: Rework hw_info_{get,put}
EDAC/amd64: Merge struct amd64_family_type into struct amd64_pvt
EDAC/amd64: Do not discover ECC symbol size for Family 17h and later
EDAC/amd64: Drop dbam_to_cs() for Family 17h and later
EDAC/amd64: Split get_csrow_nr_pages() into dct/umc functions
EDAC/amd64: Rename debug_display_dimm_sizes()

* ras/edac-misc:
EDAC/altera: Remove MODULE_LICENSE in non-module
EDAC: Sanitize MODULE_AUTHOR strings
EDAC/amd81[13]1: Remove trailing newline from MODULE_AUTHOR
EDAC/i5100: Fix typo in comment
EDAC/altera: Remove redundant error logging

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

We were stuck on rc2, should at least attempt to track drm-fixes
slightly.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

We were stuck on rc2, should at least attempt to track drm-fixes
slightly.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge branches 'misc' and 'fixes' into for-next