Merge 6.11-rc4 into driver-core-next

We need the driver core build fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into driver-core-next

We need the driver core fixes in here as well to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc4 into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc4 into usb-next

We need the usb / thunderbolt fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc4 into char-misc-next

We need the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into usb-next

We need the usb fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into tty-next

We need the tty/serial fixes in here to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into char-misc-next

We need the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'v6.11' into for-6.12/block

Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.

* tag 'v6.11': (1788 commits)
Linux 6.1

Merge tag 'v6.11' into for-6.12/block

Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.

* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge branch 'bnxt_re_variable_wqes' into rdma.git for-next

Selvin Xavier says:

=============
Enable the Variable size Work Queue entry support for Gen P7
adapters. This would help in the better ut

Merge branch 'bnxt_re_variable_wqes' into rdma.git for-next

Selvin Xavier says:

=============
Enable the Variable size Work Queue entry support for Gen P7
adapters. This would help in the better utilization of the queue memory
and pci bandwidth due to the smaller send queue Work entries.
=============

Based on v6.11-rc5 for dependencies.

* bnxt_re_variable_wqes: (829 commits)
RDMA/bnxt_re: Enable variable size WQEs for user space applications
RDMA/bnxt_re: Handle variable WQE support for user applications
RDMA/bnxt_re: Fix the table size for PSN/MSN entries
RDMA/bnxt_re: Get the WQE index from slot index while completing the WQEs
RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters
Linux 6.11-rc5
...

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge branch 'nesting_reserved_regions' into iommufd.git for-next

Nicolin Chen says:

=========
IOMMU_RESV_SW_MSI is a unique region defined by an IOMMU driver. Though it
is eventually used by a dev

Merge branch 'nesting_reserved_regions' into iommufd.git for-next

Nicolin Chen says:

=========
IOMMU_RESV_SW_MSI is a unique region defined by an IOMMU driver. Though it
is eventually used by a device for address translation to an MSI location
(including nested cases), practically it is a universal region across all
domains allocated for the IOMMU that defines it.

Currently IOMMUFD core fetches and reserves the region during an attach to
an hwpt_paging. It works with a hwpt_paging-only case, but might not work
with a nested case where a device could directly attach to a hwpt_nested,
bypassing the hwpt_paging attachment.

Move the enforcement forward, to the hwpt_paging allocation function. Then
clean up all the SW_MSI related things in the attach/replace routine.
=========

Based on v6.11-rc5 for dependencies.

* nesting_reserved_regions: (562 commits)
iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested
Linux 6.11-rc5
...

show more ...

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge tag 'bcachefs-2024-09-21' of git://evilpiepirate.org/bcachefs

Pull bcachefs updates from Kent Overstreet:

- rcu_pending, btree key cache rework: this solves lock contenting in
the key cac

Merge tag 'bcachefs-2024-09-21' of git://evilpiepirate.org/bcachefs

Pull bcachefs updates from Kent Overstreet:

- rcu_pending, btree key cache rework: this solves lock contenting in
the key cache, eliminating the biggest source of the srcu lock hold
time warnings, and drastically improving performance on some metadata
heavy workloads - on multithreaded creates we're now 3-4x faster than
xfs.

- We're now using an rhashtable instead of the system inode hash table;
this is another significant performance improvement on multithreaded
metadata workloads, eliminating more lock contention.

- for_each_btree_key_in_subvolume_upto(): new helper for iterating over
keys within a specific subvolume, eliminating a lot of open coded
"subvolume_get_snapshot()" and also fixing another source of srcu
lock time warnings, by running each loop iteration in its own
transaction (as the existing for_each_btree_key() does).

- More work on btree_trans locking asserts; we now assert that we don't
hold btree node locks when trans->locked is false, which is important
because we don't use lockdep for tracking individual btree node
locks.

- Some cleanups and improvements in the bset.c btree node lookup code,
from Alan.

- Rework of btree node pinning, which we use in backpointers fsck. The
old hacky implementation, where the shrinker just skipped over nodes
in the pinned range, was causing OOMs; instead we now use another
shrinker with a much higher seeks number for pinned nodes.

- Rebalance now uses BCH_WRITE_ONLY_SPECIFIED_DEVS; this fixes an issue
where rebalance would sometimes fall back to allocating from the full
filesystem, which is not what we want when it's trying to move data
to a specific target.

- Use __GFP_ACCOUNT, GFP_RECLAIMABLE for btree node, key cache
allocations.

- Idmap mounts are now supported (Hongbo Li)

- Rename whiteouts are now supported (Hongbo Li)

- Erasure coding can now handle devices being marked as failed, or
forcibly removed. We still need the evacuate path for erasure coding,
but it's getting very close to ready for people to start using.

* tag 'bcachefs-2024-09-21' of git://evilpiepirate.org/bcachefs: (99 commits)
bcachefs: return err ptr instead of null in read sb clean
bcachefs: Remove duplicated include in backpointers.c
bcachefs: Don't drop devices with stripe pointers
bcachefs: bch2_ec_stripe_head_get() now checks for change in rw devices
bcachefs: bch_fs.rw_devs_change_count
bcachefs: bch2_dev_remove_stripes()
bcachefs: bch2_trigger_ptr() calculates sectors even when no device
bcachefs: improve error messages in bch2_ec_read_extent()
bcachefs: improve error message on too few devices for ec
bcachefs: improve bch2_new_stripe_to_text()
bcachefs: ec_stripe_head.nr_created
bcachefs: bch_stripe.disk_label
bcachefs: stripe_to_mem()
bcachefs: EIO errcode cleanup
bcachefs: Rework btree node pinning
bcachefs: split up btree cache counters for live, freeable
bcachefs: btree cache counters should be size_t
bcachefs: Don't count "skipped access bit" as touched in btree cache scan
bcachefs: Failed devices no longer require mounting in degraded mode
bcachefs: bch2_dev_rcu_noerror()
...

show more ...

bcachefs: Don't drop devices with stripe pointers

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_ec_stripe_head_get() now checks for change in rw devices

This factors out ec_strie_head_devs_update(), which initializes the
bitmap of devices we're allocating from, and runs it every

bcachefs: bch2_ec_stripe_head_get() now checks for change in rw devices

This factors out ec_strie_head_devs_update(), which initializes the
bitmap of devices we're allocating from, and runs it every time
c->rw_devs_change_count changes.

We also cancel pending, not allocated stripes, since they may refer to
devices that are no longer available.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

show more ...

bcachefs: bch2_dev_remove_stripes()

We can now correctly force-remove a device that has stripes on it; this
uses the new BCH_SB_MEMBER_INVALID sentinal value.

Signed-off-by: Kent Overstreet <kent.o

bcachefs: bch2_dev_remove_stripes()

We can now correctly force-remove a device that has stripes on it; this
uses the new BCH_SB_MEMBER_INVALID sentinal value.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

show more ...

bcachefs: improve error messages in bch2_ec_read_extent()

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: improve error message on too few devices for ec

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: improve bch2_new_stripe_to_text()

also print out the new stripe key

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: ec_stripe_head.nr_created

additional debug stat

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch_stripe.disk_label

When reshaping existing stripes, we should keep them on the same target
that they were allocated on; to do this, we need to add a field to the
btree stripe type.

Thi

bcachefs: bch_stripe.disk_label

When reshaping existing stripes, we should keep them on the same target
that they were allocated on; to do this, we need to add a field to the
btree stripe type.

This is a tad awkward, because we only have 8 bits left, and targets are
16 bits - but we only need to store a label, not a full target.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

show more ...

bcachefs: stripe_to_mem()

factor out a common helper

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: EIO errcode cleanup

We want to be using private errcodes whenever possible, for better error
messages.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>