Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More co

Merge tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)

- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)

- Fix loop detach/open race (Gulam)

- Fix lower control limit for blk-throttle (Yu)

- Add module descriptions to various drivers (Jeff)

- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)

- Add IO priority information to block trace points (Dongliang)

- Various zone improvements and tweaks (Damien)

- mq-deadline tag reservation improvements (Bart)

- Ignore direct reclaim swap writes in writeback throttling (Baokun)

- Block integrity improvements and fixes (Anuj)

- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)

- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)

- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)

- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)

* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...

show more ...

scsi: sd: Atomic write support

Support is divided into two main areas:
- reading VPD pages and setting sdev request_queue limits
- support WRITE ATOMIC (16) command and tracing

The relevant block l

scsi: sd: Atomic write support

Support is divided into two main areas:
- reading VPD pages and setting sdev request_queue limits
- support WRITE ATOMIC (16) command and tracing

The relevant block limits VPD page need to be read to allow the block layer
request_queue atomic write limits to be set. These VPD page limits are
described in sbc4r22 section 6.6.4 - Block limits VPD page.

There are five limits of interest:
- MAXIMUM ATOMIC TRANSFER LENGTH
- ATOMIC ALIGNMENT
- ATOMIC TRANSFER LENGTH GRANULARITY
- MAXIMUM ATOMIC TRANSFER LENGTH WITH BOUNDARY
- MAXIMUM ATOMIC BOUNDARY SIZE

MAXIMUM ATOMIC TRANSFER LENGTH is the maximum length for a WRITE ATOMIC
(16) command. It will not be greater than the device MAXIMUM TRANSFER
LENGTH.

ATOMIC ALIGNMENT and ATOMIC TRANSFER LENGTH GRANULARITY are the minimum
alignment and length values for an atomic write in terms of logical blocks.

Unlike NVMe, SCSI does not specify an LBA space boundary, but does specify
a per-IO boundary granularity. The maximum boundary size is specified in
MAXIMUM ATOMIC BOUNDARY SIZE. When used, this boundary value is set in the
WRITE ATOMIC (16) ATOMIC BOUNDARY field - layout for the WRITE_ATOMIC_16
command can be found in sbc4r22 section 5.48. This boundary value is the
granularity size at which the device may atomically write the data. A value
of zero in WRITE ATOMIC (16) ATOMIC BOUNDARY field means that all data must
be atomically written together.

MAXIMUM ATOMIC TRANSFER LENGTH WITH BOUNDARY is the maximum atomic write
length if a non-zero boundary value is set.

For atomic write support, the WRITE ATOMIC (16) boundary is not of much
interest, as the block layer expects each request submitted to be executed
atomically. However, the SCSI spec does leave itself open to a quirky
scenario where MAXIMUM ATOMIC TRANSFER LENGTH is zero, yet MAXIMUM ATOMIC
TRANSFER LENGTH WITH BOUNDARY and MAXIMUM ATOMIC BOUNDARY SIZE are both
non-zero. This case will be supported.

To set the block layer request_queue atomic write capabilities, sanitize
the VPD page limits and set limits as follows:
- atomic_write_unit_min is derived from granularity and alignment values.
If no granularity value is not set, use physical block size
- atomic_write_unit_max is derived from MAXIMUM ATOMIC TRANSFER LENGTH. In
the scenario where MAXIMUM ATOMIC TRANSFER LENGTH is zero and boundary
limits are non-zero, use MAXIMUM ATOMIC BOUNDARY SIZE for
atomic_write_unit_max. New flag scsi_disk.use_atomic_write_boundary is
set for this scenario.
- atomic_write_boundary_bytes is set to zero always

SCSI also supports a WRITE ATOMIC (32) command, which is for type 2
protection enabled. This is not going to be supported now, so check for
T10_PI_TYPE2_PROTECTION when setting any request_queue limits.

To handle an atomic write request, add support for WRITE ATOMIC (16)
command in handler sd_setup_atomic_cmnd(). Flag use_atomic_write_boundary
is checked here for encoding ATOMIC BOUNDARY field.

Trace info is also added for WRITE_ATOMIC_16 command.

Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-9-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

Merge branch 'for-6.11/block-limits' into for-6.11/block

Merge in last round of queue limits changes from Christoph.

* for-6.11/block-limits: (26 commits)
block: move the bounce flag into the fea

Merge branch 'for-6.11/block-limits' into for-6.11/block

Merge in last round of queue limits changes from Christoph.

* for-6.11/block-limits: (26 commits)
block: move the bounce flag into the features field
block: move the skip_tagset_quiesce flag to queue_limits
block: move the pci_p2pdma flag to queue_limits
block: move the zone_resetall flag to queue_limits
block: move the zoned flag into the features field
block: move the poll flag to queue_limits
block: move the dax flag to queue_limits
block: move the nowait flag to queue_limits
block: move the synchronous flag to queue_limits
block: move the stable_writes flag to queue_limits
block: move the io_stat flag setting to queue_limits
block: move the add_random flag to queue_limits
block: move the nonrot flag to queue_limits
block: move cache control settings out of queue->flags
block: remove blk_flush_policy
block: freeze the queue in queue_attr_store
nbd: move setting the cache control flags to __nbd_set_size
virtio_blk: remove virtblk_update_cache_mode
loop: fold loop_update_rotational into loop_reconfigure_limits
loop: also use the default block size from an underlying block device
...

Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

sd: remove sd_is_zoned

Since commit 7437bb73f087 ("block: remove support for the host aware zone
model"), only ZBC devices expose a zoned access model. sd_is_zoned is
used to check for that and thu

sd: remove sd_is_zoned

Since commit 7437bb73f087 ("block: remove support for the host aware zone
model"), only ZBC devices expose a zoned access model. sd_is_zoned is
used to check for that and thus return false for host aware devices.

Replace the helper with the simple open coded TYPE_ZBC check to fix this.

Fixes: 7437bb73f087 ("block: remove support for the host aware zone model")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240617060532.127975-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

Merge branch 'for-6.11/block-limits' into for-6.11/block

Pull in block limits branch, which exists as a shared branch for both
the block and SCSI tree.

* for-6.11/block-limits: (26 commits)
block

Merge branch 'for-6.11/block-limits' into for-6.11/block

Pull in block limits branch, which exists as a shared branch for both
the block and SCSI tree.

* for-6.11/block-limits: (26 commits)
block: move integrity information into queue_limits
block: invert the BLK_INTEGRITY_{GENERATE,VERIFY} flags
block: bypass the STABLE_WRITES flag for protection information
block: don't require stable pages for non-PI metadata
block: use kstrtoul in flag_store
block: factor out flag_{store,show} helper for integrity
block: remove the blk_flush_integrity call in blk_integrity_unregister
block: remove the blk_integrity_profile structure
dm-integrity: use the nop integrity profile
md/raid1: don't free conf on raid0_run failure
md/raid0: don't free conf on raid0_run failure
block: initialize integrity buffer to zero before writing it to media
block: add special APIs for run-time disabling of discard and friends
block: remove unused queue limits API
sr: convert to the atomic queue limits API
sd: convert to the atomic queue limits API
sd: cleanup zoned queue limits initialization
sd: factor out a sd_discard_mode helper
sd: simplify the disable case in sd_config_discard
sd: add a sd_disable_write_same helper
...

show more ...