Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Resource management:

- Add pci_dev_for_each_resource() and pci_bus_fo

Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Resource management:

- Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
iterators

PCIe native device hotplug:

- Fix AB-BA deadlock between reset_lock and device_lock

Power management:

- Wait longer for devices to become ready after resume (as we do for
reset) to accommodate Intel Titan Ridge xHCI devices

- Extend D3hot delay for NVIDIA HDA controllers to avoid
unrecoverable devices after a bus reset

Error handling:

- Clear PCIe Device Status after EDR since generic error recovery now
only clears it when AER is native

ASPM:

- Work around Chromebook firmware defect that clobbers Capability
list (including ASPM L1 PM Substates Cap) when returning from
D3cold to D0

Freescale i.MX6 PCIe controller driver:

- Install imprecise external abort handler only when DT indicates
PCIe support

Freescale Layerscape PCIe controller driver:

- Add ls1028a endpoint mode support

Qualcomm PCIe controller driver:

- Add SM8550 DT binding and driver support

- Add SDX55 DT binding and driver support

- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3

- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0

- Add DT "mhi" register region for supported SoCs

- Expose link transition counts via debugfs to help debug low power
issues

- Support system suspend and resume; reduce interconnect bandwidth
and turn off clock and PHY if there are no active devices

- Enable async probe by default to reduce boot time

Miscellaneous:

- Sort controller Kconfig entries by vendor"

* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
...

show more ...

Merge branch 'pci/controller/kconfig'

- Use uniform language in Kconfig menu entries (Bjorn Helgaas)

- Sort controller Kconfig entries by vendor (Bjorn Helgaas)

* pci/controller/kconfig:
PCI: xi

Merge branch 'pci/controller/kconfig'

- Use uniform language in Kconfig menu entries (Bjorn Helgaas)

- Sort controller Kconfig entries by vendor (Bjorn Helgaas)

* pci/controller/kconfig:
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
PCI/PM: Increase wait time after resume
PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock
PCI: Fix up L1SS capability for Intel Apollo Lake Root Port
PCI: qcom: Expose link transition counts via debugfs
dt-bindings: PCI: qcom: Add "mhi" register region to supported SoCs
PCI: qcom: Rename qcom_pcie_config_sid_sm8250() to reflect IP version
PCI: qcom: Use macros for defining total no. of clocks & supplies
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.4.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.2
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 1.0.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.1.0
PCI: qcom: Use lower case for hex
PCI: qcom: Add missing macros for register fields
PCI: qcom: Use bitfield definitions for register fields
PCI: qcom: Sort and group registers and bitfield definitions
PCI: qcom: Remove PCIE20_ prefix from register definitions
PCI: qcom: Fix the incorrect register usage in v2.7.0 config
PCI/EDR: Add edr_handle_event() comments
PCI/EDR: Clear Device Status after EDR error recovery
efi/cper: Remove unnecessary aer.h include
dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema
PCI/P2PDMA: Fix pci_p2pmem_find_many() kernel-doc
EISA: Drop unused pci_bus_for_each_resource() index argument
PCI: Make pci_bus_for_each_resource() index optional
PCI: Document pci_bus_for_each_resource()
PCI: Introduce pci_dev_for_each_resource()
PCI: Introduce pci_resource_n()
PCI: ixp4xx: Use PCI_CONF1_ADDRESS() macro
PCI: mt7621: Use dev_info() to log PCIe card detection
PCI: imx6: Install the fault handler only on compatible match
PCI: layerscape: Add EP mode support for ls1028a
PCI: rcar: Avoid defines prefixed with CONFIG
dt-bindings: PCI: convert amlogic,meson-pcie.txt to dt-schema
PCI: kirin: Select REGMAP_MMIO

show more ...

Merge branch 'pci/controller/rcar'

- Rename internal #defines without "CONFIG_" prefix to avoid confusion
(Lukas Bulwahn)

* pci/controller/rcar:
PCI: rcar: Avoid defines prefixed with CONFIG

PCI: rcar: Avoid defines prefixed with CONFIG

Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.

In the R-car driver the bitmask to c

PCI: rcar: Avoid defines prefixed with CONFIG

Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.

In the R-car driver the bitmask to configure the SEND_ENABLE mode is named
CONFIG_SEND_ENABLE.

Rename this local definition to a more suitable name, containing the
register bitfield name defined in the R-Car Gen3 rev. 2.30 user
manual.

No functional change.

Link: https://lore.kernel.org/r/20230113084516.31888-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
[lpieralisi@kernel.org: Changed define naming and commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.17 merge window.

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."

This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge tag 'v5.15' into next

Sync up with the mainline to get the latest APIs and DT bindings.

Merge branch 'for-5.16/asus' into for-linus

Merge branch 'for-5.16-vsprintf-pgp' into for-linus

Merge branch 'pruss-fix' into fixes

Merge in a fix for pruss reset issue caused by enabling pruss for am335x.

Merge tag 'v5.15-rc2' into spi-5.15

Linux 5.15-rc2

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

No conflicts!

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge drm/drm-next into drm-intel-next

Catch-up on 5.15-rc1 and sync with drm-intel-gt-next
to prepare the PXP topic branch.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Sign

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Kickstart new drm-misc-next cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'linus' into smp/urgent

Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be rem

Merge branch 'linus' into smp/urgent

Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be removed.

show more ...