Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver s

Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.

Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:

- lots and lots of new IIO drivers and updates to existing ones

- interconnect subsystem updates and new drivers

- nvmem subsystem updates and new drivers

- mhi driver updates

- power supply subsystem updates

- kobj_type const work for many different small subsystems

- comedi driver fix

- coresight subsystem and driver updates

- fpga subsystem improvements

- slimbus fixups

- binder new feature addition for "frozen" notifications

- lots and lots of other small driver updates and cleanups

All of these have been in linux-next for a long time with no reported
problems"

* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...

show more ...

Merge tag 'iio-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing

Jonathan writes:

IIO: 1st set of new device support, features and cleanup for 6.12

Merge tag 'iio-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing

Jonathan writes:

IIO: 1st set of new device support, features and cleanup for 6.12

Includes a merge of spi-mos-config branch from spi.git that brings
support needed for the AD4000 driver.

Lots of new device support this time including 9 new drivers and substantial
changes to add new support to several more.

New device support
------------------

Given we have a lot of new support, I've subcategorized them:

Substantial changes, or new driver
**********************************

adi,ad4000
- New driver for this high speed ADC.
adi,ad4695
- New driver supporting AD4690, AD4696, AD4697 and AD4698 ADCs.
- Follow up series added triggered buffer support.
adi,ad7380
- Add support for single ended parts, AD7386, ADC7387, AD7388 and -4 variants.
(driver previously only support differential parts).
These variants have an additional front end MUX so only half the channels
can be sampled efficiently.
adi,ad9467
- Refactor and extend driver to support ad9643, ad9449 and ad9652 high speed
ADCs.
adi,adxl380
- New driver for this low power accelerometer.
adi,ltc2664
- New driver supporting LTC2664 and LTC2672 DACs.
microchip,pac1921
- New driver for this power/current monitor chip.
rohm,bh1745
- New driver for this RGBC colour sensor.
rohm,bu27034anuc
- The original bu27034 was canceled before mass production, so the
driver is modified to support the BU27034ANUC which had some significant
differences. DT compatible changed to avoid chance of old driver ever
binding to real hardware.
sciosense,ens210
- New driver for ens210, ens210a, ens211, ens212, ens213a, and ens215
temperature and humidity sensors (all register compatible up to some
conversion time differences)
sensiron,sdp500
- New driver for this differential pressure sensor.
tyhx,hx9023s
- New driver to support this capacitive proximity sensor.

Minor changes to support new devices
************************************

adi,adf4377
- Add support for the single output adf4378.
kionix,kxcjk-1013
- Add support for KX022-1020 accelerometer (binding and ID table only)
liteon,ltrf216a
- Add support for ltr-308. A few minor differences in features set
rockchip,saradc
- Add ID for rk3576-saradc
sensortek,stk3310
- Add ID for stk3013 proximity sensor which (despite documentation) has
an ambient light sensor and is compatible with existing parts.

Documentation updates
---------------------

Generalize ABI docs for shunt resistor attribute
Improve calibscale and calibbias related documentation. A couple of follow
up patches to resolve duplicate documentation that resulted.

New core features
-----------------

backend
- Add option for debugfs - useful for test pattern control
- Use this for both adi-axi-adc and adi-axi-dac
trigger suspend
- Add functions to allow triggers to be suspended. This avoids problems
when a device enters suspend to idle with a sysfs trigger. Use it for now
in the bmi323 only.

New driver features
-------------------

adi,ad7192
- Add option to be a clock provider (+ additional clock config options)
adi,ad7380
- Add documentation for this fairly new driver.
adi,ad9461
- Provide control of test modes and backend validation blocks used
to identify problems (via debugfs)
adi,ad9739
- Add backend debugfs and docs for what is provided via adi-axi-dac
avago,apds9960
- Add proximity and gesture calibration offset control
bosch,bmp280
- Triggered buffer support including adding raw+scale output for sysfs.
liteon,ltr390
- Add configuration of integration time and scale.
stm,dfsdm
- Convert this SD modulator driver to backend framework and add support
for channel scaling + modern channel bindings.

Treewide cleanup
----------------

iio_dev->masklength: Making it private.
- Provide access function to read the core compute channel mask length
and a macro to iterate over elements in the active_scan_mask.
- Enables marking masklength __private preventing drivers from
writing it without triggering a build warning whilst minimizing overhead
in what are typically hot paths.
- Convert all drivers and finally mark it private.
Merge conflicts resolved in drivers applied after this point.
Constify regmap_bus
- These are never modified, so mark them const.

Core cleanup
------------

backend
- A few late breaking bits of feedback (unused variable, error messages)
dma-buffer
- Namespace exports.
core
- Drop unused assignment.

Driver cleanup
--------------

adi,ad4695
- Fixing binding to reflect that common-mode-channel is a scalar.
adi,ad7280a
- Use __free(kfree) to simplify freeing of receive buffer.
adi,ad7606
- Various dt-binding cleanup and improvements.
- Fix oversampling related gpio handling.
- Make polarity of standby gpio match documentation.
- use guard() to simplify lock handling.
adi,ad7768
- Use device_for_each_child_node_scoped() instead of fwnode equivalent.
adi,ad7124
- Reduce SPI transfers by avoiding separate writes to different fields
in the same register.
- Start the ADC in idle mode.
adi,adis
- Drop ifdefs in favor of IS_ENABLED.
adi,admv8818
- Fix wrong ABI docs.
asahi-kasei,ak8975
- Drop a prefix free compatible accidentally added recently.
aspeed,adc
- Use of_property_present() instead of of_find_property() to see if the
property is there or not.
atmel,at91,
- Use __free(kfree) to simplify freeing of channel related array.
bosch,bma400
- Use __free(kfree) to simplify freeing a locally allocated string.
bosch,bmc150
- Add missing mount-matrix binding docs.
bosch,bme680
- Fix read/write to ensure multiple necessary sequential reads without
device configuration change.
- Drop unnecessary type casts and use more appropriate data types.
- Drop some left over ACPI code as ACPI support was removed due to invalid
IDs (and no known users).
- Sort headers consistently.
- Avoid unnecessary duplicate read and redundant read of gas config.
- Use bulk reads to get calibration data.
- Reorder allocation of IIO device to be prior to device init.
- Add remaining read/write buffers to the union used already for all others.
- Tidy up error checks for consistency of style, including dev_err_probe()
- Bring the device startup procedure inline with the vendor code.
- Reorder code so mode forcing is more obvious occurring where needed.
- Tidy up data locality in reading functions so no magic data is stored
in state structures just to get it across function calls.
- Make a local lookup table static to avoid placing it on the stack.
bosch,bmp280
- Fix BME280 regmap to not include registers it doesn't have.
- Wait a little longer after config to allow for maximum possible necessary
wait.
- Reorganize headers.
- Make conversion_time_max array static to avoid placing it on the stack.
maxim,max1363
- Use __free(kfree) to simplify freeing transmission buffer.
microchip,mcp3964
- Use devm_regulator_get_enable_read_voltage()
microchip,mcp3911
- Use devm_regulator_get_enable_read_voltage()
microchip,mcp4728
- Use devm_regulator_get_enable_read_voltage()
microchip,mcp4922
- Use devm_regulator_get_enable_read_voltage() and devm_* to allow
dropping of explicit remove() callback.
onnn,noa1305
- Various tidy up.
- Provide available scale values.
- Make integration time configurable.
- Fix up integration time look up (/2 error)
ti,dac7311
- Check if spi_setup() succeeded.
ti,tsc2046
- Use __free(kfree) to simplify freeing rx and tx buffers.
- Use devm_regulator_get_enable_read_voltage()

Various minor fixes not called out explicitly.

* tag 'iio-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (250 commits)
drivers:iio:Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
iio: sgp40: retain documentation in driver
iio: ABI: remove duplicate in_resistance_calibbias
dt-bindings: iio: st,stm32-adc: add top-level constraints
iio: ABI: add missing calibbias attributes
iio: ABI: add missing calibscale attributes
iio: ABI: sort calibscale attributes
iio: ABI: document calibscale_available attributes
iio: light: ltr390: Calculate 'counts_per_uvi' dynamically
iio: light: ltr390: Add ALS channel and support for gain and resolution
doc: iio: ad4695: document buffered read
iio: adc: ad4695: implement triggered buffer
iio: proximity: hx9023s: Fix error code in hx9023s_property_get()
iio: light: noa1305: Fix up integration time look up
iio: humidity: Add support for ENS210
dt-bindings: iio: humidity: add ENS210 sensor family
iio: imu: adis16460: drop ifdef around CONFIG_DEBUG_FS
iio: imu: adis16400: drop ifdef around CONFIG_DEBUG_FS
iio: imu: adis16480: drop ifdef around CONFIG_DEBUG_FS
iio: imu: adis16475: drop ifdef around CONFIG_DEBUG_FS
...

show more ...

iio: chemical: bme680: Modify startup procedure

Modify the startup procedure to reflect the procedure of the Bosch BME68x
Sensor API. The initial readings and configuration of the sensor need to
hap

iio: chemical: bme680: Modify startup procedure

Modify the startup procedure to reflect the procedure of the Bosch BME68x
Sensor API. The initial readings and configuration of the sensor need to
happen in the following order:

1) Read calibration data [1,2]
2) Chip general configuration [3]
3) Gas configuration [4]

After the chip configuration it is necessary to ensure that the sensor is
in sleeping mode, in order to apply the gas configuration settings [5].

Also, after the soft reset, it is advised to wait for 5ms [6].

Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L162 # [1]
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/examples/forced_mode/forced_mode.c#L44 # [2]
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/examples/forced_mode/forced_mode.c#L53 # [3]
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/examples/forced_mode/forced_mode.c#L60 # [4]
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L640 # [5]
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L294 # [6]
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-12-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: chemical: bme680: Add read buffers in read/write buffer union

Move the buffers that are used in order to read data from the device in
the union which handles all the device read/write buffers.

iio: chemical: bme680: Add read buffers in read/write buffer union

Move the buffers that are used in order to read data from the device in
the union which handles all the device read/write buffers. Also create
defines for the number of bytes that are being read from the device and
don't use magic numbers.

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-10-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: chemical: bme680: Use bulk reads for calibration data

Calibration data are located in contiguous-ish registers inside the chip.
For that reason we can use bulk reads as is done as well in the B

iio: chemical: bme680: Use bulk reads for calibration data

Calibration data are located in contiguous-ish registers inside the chip.
For that reason we can use bulk reads as is done as well in the BME68x
Sensor API [1].

The arrays that are used for reading the data out of the sensor
are located inside DMA safe buffer.

Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L1769 # [1]
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-8-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: chemical: bme680: Remove duplicate register read

The LSB of the gas register was read first to check if the following
check was correct and then the MSB+LSB were read together. Simplify this
by

iio: chemical: bme680: Remove duplicate register read

The LSB of the gas register was read first to check if the following
check was correct and then the MSB+LSB were read together. Simplify this
by reading together the MSB+LSB immediately.

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-7-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: chemical: bme680: Fix typo in define

Fix a define typo that instead of BME680_... it is saying BM6880_...

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.

iio: chemical: bme680: Fix typo in define

Fix a define typo that instead of BME680_... it is saying BM6880_...

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-3-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get a late RC of v6.10 before moving into v6.11.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.10-rc6' into for-6.11/block-post

Pull in v6.10-rc6 to resolve a conflict for the integrity cleanups.

* tag 'v6.10-rc6': (778 commits)
Linux 6.10-rc6
ata: ahci: Clean up sysfs file

Merge tag 'v6.10-rc6' into for-6.11/block-post

Pull in v6.10-rc6 to resolve a conflict for the integrity cleanups.

* tag 'v6.10-rc6': (778 commits)
Linux 6.10-rc6
ata: ahci: Clean up sysfs file on error
ata: libata-core: Fix double free on error
ata,scsi: libata-core: Do not leak memory for ata_port struct members
ata: libata-core: Fix null pointer dereference on error
x86-32: fix cmpxchg8b_emu build error with clang
x86: stop playing stack games in profile_pc()
i2c: testunit: discard write requests while old command is running
i2c: testunit: don't erase registers after STOP
tty: mxser: Remove __counted_by from mxser_board.ports[]
randomize_kstack: Remove non-functional per-arch entropy filtering
string: kunit: add missing MODULE_DESCRIPTION() macros
ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models
MAINTAINERS: Update IOMMU tree location
tools/power turbostat: Add local build_bug.h header for snapshot target
tools/power turbostat: Fix unc freq columns not showing with '-q' or '-l'
tools/power turbostat: option '-n' is ambiguous
drm/drm_file: Fix pid refcounting race
kallsyms: rework symbol lookup return codes
gpiolib: cdev: Ignore reconfiguration without direction
...

Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

Merge tag 'loongarch-kvm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.11

1. Add ParaVirt steal time support.
2. Add some V

Merge tag 'loongarch-kvm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.11

1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.

show more ...

Merge tag 'i2c-host-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

This release includes significant updates, with the primary
change being the rena

Merge tag 'i2c-host-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

This release includes significant updates, with the primary
change being the renaming from "master/slave" to
"controller/target" to adhere to I2C v7 and SMBus 3.2 standards.

New Support:

- Added support for Intel Arrow Lake-H.
- Added I2C support in the Arioha SoC by linking the Mediatek
I2C controller.

Cleanups:

- Added the MODULE_DESCRIPTION() macro, resolving a modpost
warning in the ALi 1563 Southbridge driver.
- Constified the regmap_config declaration in the i2c-designware
driver.
- Improved the coding style in the Renesas R-Car driver by
removing unnecessary semicolons after brackets.

General improvements:

- In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
RUNTIME_PM_OPS to enable waking up the controller during
suspend() before suspend_noirq() kicks in.
- Improved logging in the Xilinx driver.
- Added a warning (WARN()) in the Renesas R-Car driver for
spurious interrupts.

DTS Changes:

- Removed address-cell and size-cell from the Atmel at91sam,
nVidia Tegra 20, and Samsung S3c2410 devices.
- Fixed Texas Instruments OMAP4 I2C controller to comply with
the i2c-controller.yaml schema.
- Improved indentation in DTS examples for several I2C devices.
- Converted the NXP LPC1788 binding to the dt-schema.
- Added documentation for the compatible string
thead,th1520-i2c.
- Added the "power-domains" property for the Meson I2C driver.

show more ...

Merge 6.10-rc6 into staging-next

We need the staging driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.10-rc6 into tty-next

This resolves the merge issues in the 8250 code due to some reverts in
6.10-rc6 in the console changes.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.10-rc6 into usb-next

We need the USB fixes in here as well for some follow-on patches.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.10-rc6 into char-misc-next

We need the char/misc/iio fixes in here as well to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge v6.10-rc6 into drm-next

The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exyno

Merge v6.10-rc6 into drm-next

The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.

Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

drivers/net/phy/aquantia/aquantia.h
219343755eae ("net: phy: aquantia:

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

drivers/net/phy/aquantia/aquantia.h
219343755eae ("net: phy: aquantia: add missing include guards")
61578f679378 ("net: phy: aquantia: add support for PHY LEDs")

drivers/net/ethernet/wangxun/libwx/wx_hw.c
bd07a9817846 ("net: txgbe: remove separate irq request for MSI and INTx")
b501d261a5b3 ("net: txgbe: add FDIR ATR support")
https://lore.kernel.org/all/20240703112936.483c1975@canb.auug.org.au/

include/linux/mlx5/mlx5_ifc.h
048a403648fc ("net/mlx5: IFC updates for changing max EQs")
99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO")
https://lore.kernel.org/all/20240701133951.6926b2e3@canb.auug.org.au/

Adjacent changes:

drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
4130c67cd123 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference")
3f3126515fbe ("wifi: iwlwifi: mvm: add mvm-specific guard")

include/net/mac80211.h
816c6bec09ed ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP")
5a009b42e041 ("wifi: mac80211: track changes in AP's TPE")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'timers-v6.11-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clocksource/event driver updates from Daniel Lezcano:

- Remove unnecessary local variables

Merge tag 'timers-v6.11-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clocksource/event driver updates from Daniel Lezcano:

- Remove unnecessary local variables initialization as they will be
initialized in the code path anyway right after on the ARM arch
timer and the ARM global timer (Li kunyu)

- Fix a race condition in the interrupt leading to a deadlock on the
SH CMT driver. Note that this fix was not tested on the platform
using this timer but the fix seems reasonable enough to be picked
confidently (Niklas Söderlund)

- Increase the rating of the gic-timer and use the configured width
clocksource register on the MIPS architecture (Jiaxun Yang)

- Add the DT bindings for the TMU on the Renesas platforms (Geert
Uytterhoeven)

- Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas
Bonnefille)

- Add the rtl-otto timer driver along with the DT bindings for the
Realtek platform (Chris Packham)

Link: https://lore.kernel.org/all/91cd05de-4c5d-4242-a381-3b8a4fe6a2a2@linaro.org

show more ...