Merge tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Optimize ftrace and kprobes code patching and avoid stop machine for

Merge tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Optimize ftrace and kprobes code patching and avoid stop machine for
kprobes if sequential instruction fetching facility is available

- Add hiperdispatch feature to dynamically adjust CPU capacity in
vertical polarization to improve scheduling efficiency and overall
performance. Also add infrastructure for handling warning track
interrupts (WTI), allowing for graceful CPU preemption

- Rework crypto code pkey module and split it into separate,
independent modules for sysfs, PCKMO, CCA, and EP11, allowing modules
to load only when the relevant hardware is available

- Add hardware acceleration for HMAC modes and the full AES-XTS cipher,
utilizing message-security assist extensions (MSA) 10 and 11. It
introduces new shash implementations for HMAC-SHA224/256/384/512 and
registers the hardware-accelerated AES-XTS cipher as the preferred
option. Also add clear key token support

- Add MSA 10 and 11 processor activity instrumentation counters to perf
and update PAI Extension 1 NNPA counters

- Cleanup cpu sampling facility code and rework debug/WARN_ON_ONCE
statements

- Add support for SHA3 performance enhancements introduced with MSA 12

- Add support for the query authentication information feature of MSA
13 and introduce the KDSA CPACF instruction. Provide query and query
authentication information in sysfs, enabling tools like cpacfinfo to
present this data in a human-readable form

- Update kernel disassembler instructions

- Always enable EXPOLINE_EXTERN if supported by the compiler to ensure
kpatch compatibility

- Add missing warning handling and relocated lowcore support to the
early program check handler

- Optimize ftrace_return_address() and avoid calling unwinder

- Make modules use kernel ftrace trampolines

- Strip relocs from the final vmlinux ELF file to make it roughly 2
times smaller

- Dump register contents and call trace for early crashes to the
console

- Generate ptdump address marker array dynamically

- Fix rcu_sched stalls that might occur when adding or removing large
amounts of pages at once to or from the CMM balloon

- Fix deadlock caused by recursive lock of the AP bus scan mutex

- Unify sync and async register save areas in entry code

- Cleanup debug prints in crypto code

- Various cleanup and sanitizing patches for the decompressor

- Various small ftrace cleanups

* tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (84 commits)
s390/crypto: Display Query and Query Authentication Information in sysfs
s390/crypto: Add Support for Query Authentication Information
s390/crypto: Rework RRE and RRF CPACF inline functions
s390/crypto: Add KDSA CPACF Instruction
s390/disassembler: Remove duplicate instruction format RSY_RDRU
s390/boot: Move boot_printk() code to own file
s390/boot: Use boot_printk() instead of sclp_early_printk()
s390/boot: Rename decompressor_printk() to boot_printk()
s390/boot: Compile all files with the same march flag
s390: Use MARCH_HAS_*_FEATURES defines
s390: Provide MARCH_HAS_*_FEATURES defines
s390/facility: Disable compile time optimization for decompressor code
s390/boot: Increase minimum architecture to z10
s390/als: Remove obsolete comment
s390/sha3: Fix SHA3 selftests failures
s390/pkey: Add AES xts and HMAC clear key token support
s390/cpacf: Add MSA 10 and 11 new PCKMO functions
s390/mm: Add cond_resched() to cmm_alloc/free_pages()
s390/pai_ext: Update PAI extension 1 counters
s390/pai_crypto: Add support for MSA 10 and 11 pai counters
...

show more ...

s390/sha3: Fix SHA3 selftests failures

Since commit "s390/sha3: Support sha3 performance enhancements"
the selftests of the sha3_256_s390 and sha3_512_s390 kernel digests
sometimes fail with:

alg

s390/sha3: Fix SHA3 selftests failures

Since commit "s390/sha3: Support sha3 performance enhancements"
the selftests of the sha3_256_s390 and sha3_512_s390 kernel digests
sometimes fail with:

alg: shash: sha3-256-s390 test failed (wrong result) on test vector 3,
cfg="import/export"
alg: self-tests for sha3-256 using sha3-256-s390 failed (rc=-22)

or with

alg: ahash: sha3-256-s390 test failed (wrong result) on test vector 3,
cfg="digest misaligned splits crossing pages"
alg: self-tests for sha3-256 using sha3-256-s390 failed (rc=-22)

The first failure is because the newly introduced context field
'first_message_part' is not copied during export and import operations.
Because of that the value of 'first_message_part' is more or less random
after an import into a newly allocated context and may or may not fit to
the state of the imported SHA3 operation, causing an invalid hash when it
does not fit.

Save the 'first_message_part' field in the currently unused field 'partial'
of struct sha3_state, even though the meaning of 'partial' is not exactly
the same as 'first_message_part'. For the caller the returned state blob
is opaque and it must only be ensured that the state can be imported later
on by the module that exported it.

The second failure is when on entry of s390_sha_update() the flag
'first_message_part' is on, and kimd is called in the first 'if (index)'
block as well as in the second 'if (len >= bsize)' block. In this case,
the 'first_message_part' is turned off after the first kimd, but the
function code incorrectly retains the NIP flag. Reset the NIP flag after
the first kimd unconditionally besides turning 'first_message_part' off.

Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: 88c02b3f79a6 ("s390/sha3: Support sha3 performance enhancements")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Joerg Schmidbauer <jschmidb@de.ibm.com>
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/sha3: Support sha3 performance enhancements

On newer machines the SHA3 performance of CPACF instructions KIMD and
KLMD can be enhanced by using additional modifier bits. This allows the
applica

s390/sha3: Support sha3 performance enhancements

On newer machines the SHA3 performance of CPACF instructions KIMD and
KLMD can be enhanced by using additional modifier bits. This allows the
application to omit initializing the ICV, but also affects the internal
processing of the instructions. Performance is mostly gained when
processing short messages.

The new CPACF feature is backwards compatible with older machines, i.e.
the new modifier bits are ignored on older machines. However, to save the
ICV initialization, the application must detect the MSA level and omit
the ICV initialization only if this feature is supported.

Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Joerg Schmidbauer <jschmidb@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

Merge drm-intel-next-queued into gvt-next

Backmerge to pull in
https://patchwork.freedesktop.org/patch/353621/?series=73544&rev=1

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge tag 'v5.5-rc4' into locking/kcsan, to resolve conflicts

Conflicts:
init/main.c
lib/Kconfig.debug

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 5.6 merge window.

Merge tag 'v5.5-rc5' into next

Sync up with mainline to get SPI "delay" API changes.

Merge drm/drm-next into drm-misc-next

Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kern

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kernel.org/r/20191210093957.5120f717@canb.auug.org.au

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johans

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up BPF changes we'll need.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 's390-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Adjust PMU device drivers registration to avoid WARN_ON and few other

Merge tag 's390-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Adjust PMU device drivers registration to avoid WARN_ON and few other
perf improvements.

- Enhance tracing in vfio-ccw.

- Few stack unwinder fixes and improvements, convert get_wchan custom
stack unwinding to generic api usage.

- Fixes for mm helpers issues uncovered with tests validating
architecture page table helpers.

- Fix noexec bit handling when hardware doesn't support it.

- Fix memleak and unsigned value compared with zero bugs in crypto
code. Minor code simplification.

- Fix crash during kdump with kasan enabled kernel.

- Switch bug and alternatives from asm to asm_inline to improve
inlining decisions.

- Use 'depends on cc-option' for MARCH and TUNE options in Kconfig, add
z13s and z14 ZR1 to TUNE descriptions.

- Minor head64.S simplification.

- Fix physical to logical CPU map for SMT.

- Several cleanups in qdio code.

- Other minor cleanups and fixes all over the code.

* tag 's390-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390/cpumf: Adjust registration of s390 PMU device drivers
s390/smp: fix physical to logical CPU map for SMT
s390/early: move access registers setup in C code
s390/head64: remove unnecessary vdso_per_cpu_data setup
s390/early: move control registers setup in C code
s390/kasan: support memcpy_real with TRACE_IRQFLAGS
s390/crypto: Fix unsigned variable compared with zero
s390/pkey: use memdup_user() to simplify code
s390/pkey: fix memory leak within _copy_apqns_from_user()
s390/disassembler: don't hide instruction addresses
s390/cpum_sf: Assign error value to err variable
s390/cpum_sf: Replace function name in debug statements
s390/cpum_sf: Use consistant debug print format for sampling
s390/unwind: drop unnecessary code around calling ftrace_graph_ret_addr()
s390: add error handling to perf_callchain_kernel
s390: always inline current_stack_pointer()
s390/mm: add mm_pxd_folded() checks to pxd_free()
s390/mm: properly clear _PAGE_NOEXEC bit when it is not supported
s390/mm: simplify page table helpers for large entries
s390/mm: make pmd/pud_bad() report large entries as bad
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.5 merge window.

s390/crypto: Fix unsigned variable compared with zero

s390_crypto_shash_parmsize() return type is int, it
should not be stored in a unsigned variable, which
compared with zero.

Reported-by: Hulk Ro

s390/crypto: Fix unsigned variable compared with zero

s390_crypto_shash_parmsize() return type is int, it
should not be stored in a unsigned variable, which
compared with zero.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 3c2eb6b76cab ("s390/crypto: Support for SHA3 via CPACF (MSA6)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Joerg Schmidbauer <jschmidb@linux.vnet.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

Merge tag 'v5.4-rc8' into WIP.x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into x86/hyperv

Pick up upstream fixes to avoid conflicts.

Merge tag 'v5.4-rc5' into next

Sync up with mainline.

Merge tag 'v5.4-rc3' into spi-5.4

Linux 5.4-rc3

Merge drm/drm-next into drm-intel-next-queued

Backmerging to pull in HDR DP code:

https://lists.freedesktop.org/archives/dri-devel/2019-September/236453.html

Signed-off-by: Joonas Lahtinen <joonas

Merge drm/drm-next into drm-intel-next-queued

Backmerging to pull in HDR DP code:

https://lists.freedesktop.org/archives/dri-devel/2019-September/236453.html

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'fix-missing-panels' into fixes

Merge drm/drm-next into drm-misc-next

We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.

Signed-off-by: Maxime R

Merge drm/drm-next into drm-misc-next

We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

We haven't backmerged for a while, let's start the -rc period by pulling
rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Add support for IBM z15 machines.

- Add SHA3 and CCA AES cipher key sup

Merge tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Add support for IBM z15 machines.

- Add SHA3 and CCA AES cipher key support in zcrypt and pkey
refactoring.

- Move to arch_stack_walk infrastructure for the stack unwinder.

- Various kasan fixes and improvements.

- Various command line parsing fixes.

- Improve decompressor phase debuggability.

- Lift no bss usage restriction for the early code.

- Use refcount_t for reference counters for couple of places in mm
code.

- Logging improvements and return code fix in vfio-ccw code.

- Couple of zpci fixes and minor refactoring.

- Remove some outdated documentation.

- Fix secure boot detection.

- Other various minor code clean ups.

* tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390: remove pointless drivers-y in drivers/s390/Makefile
s390/cpum_sf: Fix line length and format string
s390/pci: fix MSI message data
s390: add support for IBM z15 machines
s390/crypto: Support for SHA3 via CPACF (MSA6)
s390/startup: add pgm check info printing
s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding
vfio-ccw: fix error return code in vfio_ccw_sch_init()
s390: vfio-ap: fix warning reset not completed
s390/base: remove unused s390_base_mcck_handler
s390/sclp: Fix bit checked for has_sipl
s390/zcrypt: fix wrong handling of cca cipher keygenflags
s390/kasan: add kdump support
s390/setup: avoid using strncmp with hardcoded length
s390/sclp: avoid using strncmp with hardcoded length
s390/module: avoid using strncmp with hardcoded length
s390/pci: avoid using strncmp with hardcoded length
s390/kaslr: reserve memory for kasan usage
s390/mem_detect: provide single get_mem_detect_end
s390/cmma: reuse kstrtobool for option value parsing
...

show more ...

s390/crypto: Support for SHA3 via CPACF (MSA6)

This patch introduces sha3 support for s390.

- Rework the s390-specific SHA1 and SHA2 related code to
provide the basis for SHA3.
- Provide two new

s390/crypto: Support for SHA3 via CPACF (MSA6)

This patch introduces sha3 support for s390.

- Rework the s390-specific SHA1 and SHA2 related code to
provide the basis for SHA3.
- Provide two new kernel modules sha3_256_s390 and
sha3_512_s390 together with new kernel options.

Signed-off-by: Joerg Schmidbauer <jschmidb@de.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 4.17 merge window.