Merge tag 'imx-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX arm64 device tree change for 6.11:

- New board support: imx8mm-iot-gateway, imx93-9x9-qs

Merge tag 'imx-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX arm64 device tree change for 6.11:

- New board support: imx8mm-iot-gateway, imx93-9x9-qsb, imx95-19x19-evk,
imx8mp-tqma8mpql-mba8mp-ras314, etc.
- A series from Adam Ford that improves imx8mp-beacon-kit support by
fixing dtschema issues and enabling HDMI bridge HPD
- A set of changes from Alexander Stein that adds partitions subnode
to spi-nor
- A great number of changes from Frank Li that add audio, flexcan, gpmi
related devices for imx8dxl, imx8qm based boards
- A bunch of layerscape dtschema issue fixes from Frank Li
- A series from Krzysztof Kozlowski to use defines for interrupts
- A number of improvements on i.MX8MP DHCOM devices from Marek Vasut
- A couple of changes from Parthiban Nallathambi that add PCIe PHY and
RS232/RS485 overlays for phygate-tauri-l board
- A series from Shengjiu Wang that adds bt-sco and XCVR sound card
support for imx8mp-evk
- A series from Tim Harvey that fixes dt-schema warnings and adds DP83867
configuration for i.MX8M Venice devices
- Other random feature additions and improvments on various boards

* tag 'imx-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (91 commits)
arm64: dts: imx8mp: Remove 'snps,rx-sched-sp'
arm64: dts: imx8mm-verdin: add TPM device
arm64: dts: imx8mp-evk: Add audio XCVR sound card
arm64: dts: imx8mp: Add audio XCVR device node
arm64: dts: imx8mp: Update Fast ethernet PHY MDIO addresses to match DH i.MX8MP DHCOM rev.200
arm64: dts: imx8mp: Do not reconfigure Audio PLL2 on DH i.MX8M Plus DHCOM SoM
arm64: dts: layerscape: rename b(q)man-portals to b(q)man-portals-bus
arm64: dts: fsl-ls1046a: rename thermal node name
arm64: dts: fsl-ls1043a: remove unused clk-name at watchdog node
arm64: dts: layerscape: rename aux_bus to aux-bus
arm64: dts: layerscape: change pcie interrupt order
arm64: dts: layerscape: rename node name "wdt" to "watchdog"
arm64: dts: layerscape: add #dma-cells for qdma
arm64: dts: layerscape: remove compatible string 'fsl,fman-xmdio' for fman3
arm64: dts: layerscape: replace node name 'nor' with 'flash'
arm64: dts: fsl-ls1012a: remove property 'snps,host-vbus-glitches'
arm64: dts: fsl-lx2160a: fix #address-cells for pinctrl-single
arm64: dts: layerscape: add platform special compatible string for gpio
arm64: dts: layerscape: rename node 'timer' as 'rtc'
arm64: dts: imx8qxp-mek: Pass memory-region to the DSP node
...

Link: https://lore.kernel.org/r/20240702142153.413061-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'regulator-hw-enable-helper' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into reset/next

regulator: Add helper to allow enable/disable in interrupt context

Add a

Merge tag 'regulator-hw-enable-helper' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into reset/next

regulator: Add helper to allow enable/disable in interrupt context

Add a helper function that enables exclusive consumers to bypass locking
and do an enable/disable from within interrupt context.

Link: https://lore.kernel.org/r/988df019-00d4-4209-8716-39e82c565bf1@sirena.org.uk
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

arm64: dts: imx8mp: Update Fast ethernet PHY MDIO addresses to match DH i.MX8MP DHCOM rev.200

The production DH i.MX8MP DHCOM SoM rev.200 uses updated PHY MDIO addresses
for the Fast ethernet PHYs.

arm64: dts: imx8mp: Update Fast ethernet PHY MDIO addresses to match DH i.MX8MP DHCOM rev.200

The production DH i.MX8MP DHCOM SoM rev.200 uses updated PHY MDIO addresses
for the Fast ethernet PHYs. Update the base SoM DT to cater for this change.
Prototype rev.100 SoM was never publicly available and was manufactured in
limited series, anything currently available is rev.200 or newer, so it is
safe to update the DT this way.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

arm64: dts: imx8mp: Do not reconfigure Audio PLL2 on DH i.MX8M Plus DHCOM SoM

The DH i.MX8M Plus DHCOM SoM uses Audio PLL2 to supply clock to CLKOUT2
output. Those clock are used to supply on-SoM TC

arm64: dts: imx8mp: Do not reconfigure Audio PLL2 on DH i.MX8M Plus DHCOM SoM

The DH i.MX8M Plus DHCOM SoM uses Audio PLL2 to supply clock to CLKOUT2
output. Those clock are used to supply on-SoM TC9595 DSI-to-(e)DP bridge
with RefClk and must not be reconfigured, otherwise the bridge cannot
work correctly. Stop reconfiguring Audio PLL2 on this SoM.

Fixes: f560da940e32 ("arm64: dts: imx8mp: Initialize audio PLLs from audiomix subsystem")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

Merge tag 'imx-fixes-6.10' into imx/dt64

i.MX fixes for 6.10:

- Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board.
- Enable hysteresis for SODIMM_17 pin on imx8mm-verdin board to increase
i

Merge tag 'imx-fixes-6.10' into imx/dt64

i.MX fixes for 6.10:

- Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board.
- Enable hysteresis for SODIMM_17 pin on imx8mm-verdin board to increase
immunity against noise.
- Remove 'no-sdio' property for uSDHC2 on imx93-11x11-evk board, so that
SDIO cards could also work.
- Fix BT shutdown GPIO for imx8mp-venice-gw73xx-2x board.
- Fix panel node deleting on imx53-qsb-hdmi, as /delete-node/ directive
doesn't really delete a node in a DT overlay.
- Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM.
- Fix GPU speed for imx8mm-verdin board by enabling overdrive mode in
the SOM dtsi.

show more ...

Merge branch 'for-6.10-fixes' into for-6.11

Merge tag 'timers-v6.11-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clocksource/event driver updates from Daniel Lezcano:

- Remove unnecessary local variables

Merge tag 'timers-v6.11-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clocksource/event driver updates from Daniel Lezcano:

- Remove unnecessary local variables initialization as they will be
initialized in the code path anyway right after on the ARM arch
timer and the ARM global timer (Li kunyu)

- Fix a race condition in the interrupt leading to a deadlock on the
SH CMT driver. Note that this fix was not tested on the platform
using this timer but the fix seems reasonable enough to be picked
confidently (Niklas Söderlund)

- Increase the rating of the gic-timer and use the configured width
clocksource register on the MIPS architecture (Jiaxun Yang)

- Add the DT bindings for the TMU on the Renesas platforms (Geert
Uytterhoeven)

- Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas
Bonnefille)

- Add the rtl-otto timer driver along with the DT bindings for the
Realtek platform (Chris Packham)

Link: https://lore.kernel.org/all/91cd05de-4c5d-4242-a381-3b8a4fe6a2a2@linaro.org

show more ...

regmap: Implement regmap_multi_reg_read()

Merge series from Guenter Roeck <linux@roeck-us.net>:

regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential re

regmap: Implement regmap_multi_reg_read()

Merge series from Guenter Roeck <linux@roeck-us.net>:

regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential registers. It is helpful if multiple non-
sequential registers need to be read in a single operation which would
otherwise have to be mutex protected.

The name of the new function was chosen to match the existing function
regmap_multi_reg_write().

show more ...

Add USB VBUS regulator for RZ/G2L

Merge series from Biju Das <biju.das.jz@bp.renesas.com>:

As per RZ/G2L HW manual, VBUS enable can be controlled by the VBOUT bit of
the VBUS Control Register(VBENC

Add USB VBUS regulator for RZ/G2L

Merge series from Biju Das <biju.das.jz@bp.renesas.com>:

As per RZ/G2L HW manual, VBUS enable can be controlled by the VBOUT bit of
the VBUS Control Register(VBENCTL) register in the USBPHY Control. But
this IP is in the Reset block.

Reset driver exposes this register as regmap and instantiate the USB VBUS
regulator device. Consumers(phy device) can use regulator APIs to control
VBUS as controlling is done in the atomic context using a new API which
is added for the purpose.

show more ...

Merge tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC fixes from Arnd Bergmann:
"There are seven oneline patches that each address a distinct problem
on the

Merge tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC fixes from Arnd Bergmann:
"There are seven oneline patches that each address a distinct problem
on the NXP i.MX platform, mostly the popular i.MX8M variant.

The only other two fixes are for error handling on the psci firmware
driver and SD card support on the milkv duo riscv board"

* tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: psci: Fix return value from psci_system_suspend()
riscv: dts: sophgo: disable write-protection for milkv duo
arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
arm64: dts: freescale: imx8mm-verdin: Fix GPU speed

show more ...

Merge tag 'imx-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.10:

- Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board.
- Enable hy

Merge tag 'imx-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.10:

- Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board.
- Enable hysteresis for SODIMM_17 pin on imx8mm-verdin board to increase
immunity against noise.
- Remove 'no-sdio' property for uSDHC2 on imx93-11x11-evk board, so that
SDIO cards could also work.
- Fix BT shutdown GPIO for imx8mp-venice-gw73xx-2x board.
- Fix panel node deleting on imx53-qsb-hdmi, as /delete-node/ directive
doesn't really delete a node in a DT overlay.
- Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM.
- Fix GPU speed for imx8mm-verdin board by enabling overdrive mode in
the SOM dtsi.

* tag 'imx-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
arm64: dts: freescale: imx8mm-verdin: Fix GPU speed

Link: https://lore.kernel.org/r/Zm+xVUmFtaOnYBb4@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM

The IMX8MP_CLK_CLKOUT2 supplies the TC9595 bridge with 13 MHz reference
clock. The IMX8MP_CLK_CLKOUT2 is supplied from IMX8MP_A

arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM

The IMX8MP_CLK_CLKOUT2 supplies the TC9595 bridge with 13 MHz reference
clock. The IMX8MP_CLK_CLKOUT2 is supplied from IMX8MP_AUDIO_PLL2_OUT.
The IMX8MP_CLK_CLKOUT2 operates only as a power-of-two divider, and the
current 156 MHz is not power-of-two divisible to achieve 13 MHz.

To achieve 13 MHz output from IMX8MP_CLK_CLKOUT2, set IMX8MP_AUDIO_PLL2_OUT
to 208 MHz, because 208 MHz / 16 = 13 MHz.

Fixes: 20d0b83e712b ("arm64: dts: imx8mp: Add TC9595 bridge on DH electronics i.MX8M Plus DHCOM")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

Merge branch 'master' into mm-stable

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <tho

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

show more ...

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configu

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configuration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up on 6.9-rc2

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.9-rc2 changes into drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync to get the drm_printer changes to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get drm-misc-fixes to the state of v6.9-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'asoc-fix-v6.9-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

A bunch of fixes that came in during the merge window, pr

Merge tag 'asoc-fix-v6.9-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

A bunch of fixes that came in during the merge window, probably the most
substantial thing is the DPCM locking fix for compressed audio which has
been lurking for a while.

show more ...

spi: Merge up v6.8 release

An i.MX fix depends on other fixes that were sent to v6.8.

ASoC: Merge up release

In order to apply additional fixes that depend on the fixes merged for
v6.8 merge up the final release.

Merge tag 'drm-misc-next-2024-02-08' into msm-next

Merge the drm-misc tree to uprev MSM CI.

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge drm/drm-next into drm-misc-next

Kickstart 6.9 development cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-xe-next

Sync to v6.8-rc1.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>