sys: Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

ixl(4): Fix 2.5 and 5G speeds reporting and update shared code

Fix 2.5 and 5G speeds reporting and update shared code with recent
changes:
- Update expected FW API versions for X710 and X722 adapter

ixl(4): Fix 2.5 and 5G speeds reporting and update shared code

Fix 2.5 and 5G speeds reporting and update shared code with recent
changes:
- Update expected FW API versions for X710 and X722 adapters
- Define pointers related to Preservation Rules Module
- Add definitions for Shadow RAM pointers to new modules: 5th and 6th
FPA, and Preservation Rules Module.
- Add I40E_RX_PTYPE_PARSER_ABORTED definition, so the driver will know
opcode for parser aborted packets.
- Add the new filter types needed for custom cloud filters.
- Add support for Minimum Rollback Revision
- Fix RX_ONLY mode for unicast promiscuous on VLAN
- Add EEE LPI status check for X722 adapters
- Fix PHY type identifiers for 2.5G and 5G adapters
- Fix update link data for X722
- Increase the timeout value for PF reset to give PF more time to finish
reset if it is loaded with filters.
- Added support for Min Rollback Revision for 4 more X722 modules
- Fix reporting of Active Optical Cable media type
- Add flags and fields for double VLAN processing
- Fix potentially uninitialized variables in NVM code

Reviewed by: kbowling@, mike.jakubik@gmail.com
Tested by: gowtham.kumar.ks@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D31565

show more ...

ixl(4): Add FW recovery mode support and other things

Update the iflib version of ixl driver based on the OOT version ixl-1.11.29.

Major changes:

- Extract iflib specific functions from ixl_pf_mai

ixl(4): Add FW recovery mode support and other things

Update the iflib version of ixl driver based on the OOT version ixl-1.11.29.

Major changes:

- Extract iflib specific functions from ixl_pf_main.c to ixl_pf_iflib.c
to simplify code sharing between legacy and iflib version of driver

- Add support for most recent FW API version (1.10), which extends FW
LLDP Agent control by user to X722 devices

- Improve handling of device global reset

- Add support for the FW recovery mode

- Use virtchnl function to validate virtual channel messages instead of
using separate checks

- Fix MAC/VLAN filters accounting

Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: erj@
Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D24564

show more ...

ixl(4): Update version number to 2.0.0-k

And update copyrights to current year.

MFC after: 1 month
Sponsored by: Intel Corporation

ixl(4): Update to 1.9.9-k

Refresh upstream driver before impending conversion to iflib.

Major changes:

- Support for descriptor writeback mode (required by ixlv(4) for AVF support)
- Ability to di

ixl(4): Update to 1.9.9-k

Refresh upstream driver before impending conversion to iflib.

Major changes:

- Support for descriptor writeback mode (required by ixlv(4) for AVF support)
- Ability to disable firmware LLDP agent by user (PR 221530)
- Fix for TX queue hang when using TSO (PR 221919)
- Separate descriptor ring sizes for TX and RX rings

PR: 221530, 221919
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: #IntelNetworking
MFC after: 1 day
Relnotes: Yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D14985

show more ...

Merge ^/head r313301 through r313643.

ixl(4): Update to 1.7.12-k

Refresh upstream driver before impending conversion to iflib.

Major new features:

- Support for Fortville-based 25G adapters
- Support for I2C reads/writes

(To prevent

ixl(4): Update to 1.7.12-k

Refresh upstream driver before impending conversion to iflib.

Major new features:

- Support for Fortville-based 25G adapters
- Support for I2C reads/writes

(To prevent getting or sending corrupt data, you should set
dev.ixl.0.debug.disable_fw_link_management=1 when using I2C
[this will disable link!], then set it to 0 when done. The driver implements
the SIOCGI2C ioctl, so ifconfig -v works for reading I2C data,
but there are read_i2c and write_i2c sysctls under the .debug sysctl tree
[the latter being useful for upper page support in QSFP+]).

- Addition of an iWARP client interface (so the future iWARP driver for
X722 devices can communicate with the base driver).
- Compiling this option in is enabled by default, with "options IXL_IW" in
GENERIC.

Differential Revision: https://reviews.freebsd.org/D9227
Reviewed by: sbruno
MFC after: 2 weeks
Sponsored by: Intel Corporation

show more ...

ixl: Update to 1.4.9-k.

Changes by author:

Kamil Krawczyk i40e-shared: use explicit cast from u16 to u8
Anjali Singhai Jain i40e-shared: Add a Virtchnl offload for RSS PCTYPE V2
Eric Joyner ixl:

ixl: Update to 1.4.9-k.

Changes by author:

Kamil Krawczyk i40e-shared: use explicit cast from u16 to u8
Anjali Singhai Jain i40e-shared: Add a Virtchnl offload for RSS PCTYPE V2
Eric Joyner ixl: Remove HP device IDs.
Jesse Brandeburg i40e-shared: add small bit of debug
Mitch Williams i40e-shared: check for stopped admin queue
Mitch Williams i40e-shared: set aq count after memory allocation
Jesse Brandeburg i40e-shared: remove forever unused ID
Eric Joyner ixl: Fix bug where RSS does not hash to more than 16 queues.
Shannon Nelson i40e-shared: define function capabilities in only one place
Eric Joyner ixl: Change spacing, comments, and a single error message.
Eric Joyner ixl: Save admin queue phy interrupt mask as a define.
Eric Joyner ixl: Move callout_reset() to later in init_locked(), and stop clearing OACTIVE in driver flags.
Eric Joyner ixl: Add new reset+build flow to init() if it detects that the admin queue is stopped.
Eric Joyner ixl: Return EACCES instead of EPERM when an nvmupdate command fails.
Eric Joyner ixl: Remove KX_A device ID.

Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation

show more ...

Catch up with HEAD (r280229-r284686).

Merge from head

Merged ^/head r283871 through r284187.

Update SW4 to the Intel ixl/ixlv drivers. This is primarily a shared
code update, with supporting changes in the CORE. Changes for the extended
media types, VF driver has virtual channel protocol cha

Update SW4 to the Intel ixl/ixlv drivers. This is primarily a shared
code update, with supporting changes in the CORE. Changes for the extended
media types, VF driver has virtual channel protocol changes, and some
register use corrections. This software change should be coordinated with
Firmware updates to your hardware, contact your support channels for that.

MFC after: 1 week

show more ...

MFH: r282615-r283655

Sponsored by: The FreeBSD Foundation

Merge sync of head

Remove executable property from several ixl(4) source files.

Differential Revision: https://reviews.freebsd.org/D2583
Reviewed by: erj

MFH: r278968-r280640

Sponsored by: The FreeBSD Foundation

Merge from head

Merge r278538 through r279514.

Merge ^/head r279023 through r279162.

Bring the XL710 drivers up to the SW3 release level.

MFC after: 1 week

MFhead @ r277403

Reintegrate head: r274132-r277384

Sponsored by: The FreeBSD Foundation

Reintegrate head revisions r273096-r277147

Sponsored by: The FreeBSD Foundation

Update to the shared code for Intel I40E drivers in preparation
for the ixl 1.3.0 and ixlv 1.2.0 revisions.

MFC after: 1 week

Merge from head@274682