#
40f65a4d |
| 07-Aug-2013 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r254014
|
#
552311f4 |
| 17-Jul-2013 |
Xin LI <delphij@FreeBSD.org> |
IFC @253398
|
#
46b01b2c |
| 21-Jun-2013 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r252047
|
#
cfe30d02 |
| 19-Jun-2013 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Merge fresh head.
|
#
fd75b91d |
| 18-Jun-2013 |
Jack F Vogel <jfv@FreeBSD.org> |
Add quad port probe support, this gives the admin proper information about the slot (which should be a PCIE Gen 3 slot for this adapter) by looking back thru the PCI parent devices to the slot device
Add quad port probe support, this gives the admin proper information about the slot (which should be a PCIE Gen 3 slot for this adapter) by looking back thru the PCI parent devices to the slot device.
The fix above also corrects the bandwidth display to GT/s rather than the incorrect Gb/s
Next, allow the use of ALTQ if you select the compile option IXGBE_LEGACY_TX.
Allow the use of 'unsupported' optic modules by a compile option as well.
Add a phy reset capability into the stop code, this is so a static configured driver will still behave properly when taken down (not being able to unload it).
This revision synchronizes the shared code with Intel internal current code, and note that it now includes DCB supporting code, this was necessitated by some internal changes with the code, but it also will provide the opportunity to develop this feature in the core driver down the road.
I have edited the README to get rid of some of the worse anachronisms in it as well, its by no means as robust as I might wish at this point however.
Oh, I also have included some conditional stuff in the code so it will be compatible in both the 9.X and 10 environments.
Performance has been a focus in recent changes and I believe this revision driver will perform very well in most workloads.
MFC after: 2 weeks
show more ...
|
Revision tags: release/8.4.0 |
|
#
69e6d7b7 |
| 12-Apr-2013 |
Simon J. Gerraty <sjg@FreeBSD.org> |
sync from head
|
#
a03fbc7e |
| 09-Mar-2013 |
Martin Matuska <mm@FreeBSD.org> |
MFC @248093
|
#
0ecc2ff0 |
| 05-Mar-2013 |
Jack F Vogel <jfv@FreeBSD.org> |
First, sync to internal shared code, and then
Fixes: - flow control - don't override user value on re-init - fix to make 1G optics work correctly - change to interrupt enabling - some bits were i
First, sync to internal shared code, and then
Fixes: - flow control - don't override user value on re-init - fix to make 1G optics work correctly - change to interrupt enabling - some bits were incorrect for certain hardware. - certain stats fixes, remove a duplicate increment of ierror, thanks to Scott Long for pointing these out. - shared code link interface changed, requiring some core code changes to accomodate this. - add an m_adj() to ETHER_ALIGN on the recieve side, this was requested by Mike Karels, thanks Mike. - Multicast code corrections also thanks to Mike Karels.
show more ...
|
Revision tags: release/9.1.0 |
|
#
23090366 |
| 04-Nov-2012 |
Simon J. Gerraty <sjg@FreeBSD.org> |
Sync from head
|
#
de720122 |
| 15-Jul-2012 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Merge head r236710 through r238467.
|
#
6cf87ec8 |
| 13-Jul-2012 |
Xin LI <delphij@FreeBSD.org> |
IFC @238412.
|
#
b652778e |
| 11-Jul-2012 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r238370
|
#
a621e3c8 |
| 05-Jul-2012 |
Jack F Vogel <jfv@FreeBSD.org> |
Update to the ixgbe driver: - Add a couple of new devices - Flow control changes in shared and core code - Bug fix to Flow Director for 82598 - Shared code sync to internal with required core
Update to the ixgbe driver: - Add a couple of new devices - Flow control changes in shared and core code - Bug fix to Flow Director for 82598 - Shared code sync to internal with required core change
Thanks to those helping in the testing and improvements to this driver!
MFC after:5 days
show more ...
|
#
6a068746 |
| 15-May-2012 |
Alexander Motin <mav@FreeBSD.org> |
MFC
|
#
38f1b189 |
| 26-Apr-2012 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r234692
sys/amd64/include/cpufunc.h sys/amd64/include/fpu.h sys/amd64/amd64/fpu.c sys/amd64/vmm/vmm.c
- Add API to allow vmm FPU state init/save/restore.
FP stuff discussed with: kib
|
Revision tags: release/8.3.0_cvs, release/8.3.0 |
|
#
85d0a26e |
| 30-Jan-2012 |
Jack F Vogel <jfv@FreeBSD.org> |
New hardware support: Intel X540 adapter support added. Some shared code reorganization along with the new adapter. Sync changes to OACTIVE in igb into this driver. Misc small fixes.
|
Revision tags: release/9.0.0 |
|
#
9b4fcf85 |
| 18-Feb-2011 |
Marcel Moolenaar <marcel@FreeBSD.org> |
Merge svn+ssh://svn.freebsd.org/base/head@218816
|
Revision tags: release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0 |
|
#
182b3808 |
| 19-Jan-2011 |
Jack F Vogel <jfv@FreeBSD.org> |
Update driver to version 2.3.8: CRITICAL FIX - with stats changes the older 82598 will panic and trash the stack on driver load, FCOE registers ONLY exist in 82599 and must not be read otherwise.
Update driver to version 2.3.8: CRITICAL FIX - with stats changes the older 82598 will panic and trash the stack on driver load, FCOE registers ONLY exist in 82599 and must not be read otherwise.
kern/153951 - to correct incorrect media type on adapters with pluggable modules I have eliminated the old static table in favor of a new dynamic shared code routine. This also has the benefit of detecting changes when a different module is inserted.
Performance/enhancement to the Flow Director code from my linux coworker (the developer of the code).
Fixes from Michael Tuexen - a data corruption problem on the 82599 (CRITICAL), fix so the buf size correctly adjusts as the cluster changes, and max descriptors are set properly. Also added 16K clusters for those REALLY big jumbos :)
In the RX path, the RX LOCK was not being released, and this causes LOR problems. Add the code that igb already has.
Sync with in house shared code, this was necessary for the Flow Director fix.
MFC in 2 days
show more ...
|
#
0c21a60c |
| 05-Dec-2010 |
Marcel Moolenaar <marcel@FreeBSD.org> |
svn+ssh://svn.freebsd.org/base/head@216199
|
#
2006fbc8 |
| 02-Dec-2010 |
Dimitry Andric <dim@FreeBSD.org> |
Sync: merge r215944 through r216132 from ^/head.
|
#
1a4e3449 |
| 26-Nov-2010 |
Jack F Vogel <jfv@FreeBSD.org> |
Update ixgbe driver to verion 2.3.6 - This adds a VM SRIOV interface, ixv, it is however transparent to the user, it links with the ixgbe.ko, but when ixgbe is loaded in a virtualized guest wi
Update ixgbe driver to verion 2.3.6 - This adds a VM SRIOV interface, ixv, it is however transparent to the user, it links with the ixgbe.ko, but when ixgbe is loaded in a virtualized guest with SRIOV configured this will be detected. - Sync shared code to latest - Many bug fixes and improvements, thanks to everyone who has been using the driver and reporting issues.
show more ...
|
Revision tags: release/8.1.0_cvs, release/8.1.0 |
|
#
a4bf5fb9 |
| 28-Apr-2010 |
Kirk McKusick <mckusick@FreeBSD.org> |
Update to current version of head.
|
#
d4e2e2a5 |
| 05-Apr-2010 |
Jack F Vogel <jfv@FreeBSD.org> |
MFC of version 2.1.7 of the ixgbe driver.
|
#
8892b97b |
| 29-Mar-2010 |
Marcel Moolenaar <marcel@FreeBSD.org> |
Merge svn+ssh://svn.freebsd.org/base/head@205807
|
#
c0014855 |
| 27-Mar-2010 |
Jack F Vogel <jfv@FreeBSD.org> |
Update the driver to Intel version 2.1.6 - add some new hardware support for 82599 - Big change to interrupt architecture, it now uses a queue which contains an RX/TX pair as the recipient of
Update the driver to Intel version 2.1.6 - add some new hardware support for 82599 - Big change to interrupt architecture, it now uses a queue which contains an RX/TX pair as the recipient of the interrupt. This will reduce overall system interrupts/msix usage. - Improved RX mbuf handling: the old get_buf routine is no longer synchronized with rxeof, this allows the elimination of packet discards due to mbuf allocation failure. - Much simplified and improved AIM code, it now happens in the queue interrupt context and takes into account both the traffic on the RX AND TX side. - variety of small tweaks, like ring size, that have been seen as performance improvements. - Thanks to those that provided feedback or suggested changes, I hope I've caught all of them.
show more ...
|