#!/bin/ksh -p
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#

# Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.

# ident	"%Z%%M%	%I%	%E% SMI"

format=ufs
ALT_ROOT=
compress=yes
SPLIT=unknown
ERROR=0

BOOT_ARCHIVE=platform/i86pc/boot_archive
BOOT_ARCHIVE_64=platform/i86pc/amd64/boot_archive

export PATH=$PATH:/usr/sbin:/usr/bin:/sbin

#
# Parse options
#
while [ "$1" != "" ]
do
        case $1 in
        -R)	shift
		ALT_ROOT="$1"
		if [ "$ALT_ROOT" != "/" ]; then
			echo "Creating ram disk for $ALT_ROOT"
		fi
		;;
	-n|--nocompress) compress=no
		;;
        *)      echo Usage: ${0##*/}: [-R \<root\>] [--nocompress]
		exit
		;;
        esac
	shift
done

if [ -x /usr/bin/mkisofs -o -x /tmp/bfubin/mkisofs ] ; then
	format=isofs
fi

#
# mkisofs on s8 doesn't support functionality used by GRUB boot.
# Use ufs format for boot archive instead.
#
release=`uname -r`
if [ "$release" = "5.8" ]; then
	format=ufs
fi

shift `expr $OPTIND - 1`

if [ $# -eq 1 ]; then
	ALT_ROOT="$1"
	echo "Creating ram disk for $ALT_ROOT"
fi

rundir=`dirname $0`
if [ ! -x $rundir/symdef ]; then
	# Shouldn't happen
	echo "Warning: $rundir/symdef not present."
	echo "Creating single archive at $ALT_ROOT/platform/i86pc/boot_archive"
	SPLIT=no
	compress=no
elif $rundir/symdef "$ALT_ROOT"/platform/i86pc/kernel/unix \
    dboot_image 2>/dev/null; then
	SPLIT=yes
else
	SPLIT=no
	compress=no
fi

[ -x /usr/bin/gzip ] || compress=no

function cleanup
{
	umount -f "$rdmnt32" 2>/dev/null
	umount -f "$rdmnt64" 2>/dev/null
	lofiadm -d "$rdfile32" 2>/dev/null
	lofiadm -d "$rdfile64" 2>/dev/null
	rm -fr "$rddir" 2> /dev/null
}

function getsize
{
	# Estimate image size and add %10 overhead for ufs stuff.
	# Note, we can't use du here in case we're on a filesystem, e.g. zfs,
	# in which the disk usage is less than the sum of the file sizes.
	# The nawk code 
	#
	#	{t += ($7 % 1024) ? (int($7 / 1024) + 1) * 1024 : $7}
	#
	# below rounds up the size of a file/directory, in bytes, to the
	# next multiple of 1024.  This mimics the behavior of ufs especially
	# with directories.  This results in a total size that's slightly
	# bigger than if du was called on a ufs directory.
	total_size=$(cd "/$ALT_ROOT"
		find $filelist -ls 2>/dev/null | nawk '
			{t += ($7 % 1024) ? (int($7 / 1024) + 1) * 1024 : $7}
			END {print int(t * 1.10 / 1024)}')
}

#
# The first argument can be:
#
# "both" - create an archive with both 32-bit and 64-bit binaries
# "32-bit" - create an archive with only 32-bit binaries
# "64-bit" - create an archive with only 64-bit binaries
#
function create_ufs
{
	which=$1
	archive=$2
	lofidev=$3

	# should we exclude amd64 binaries?
	if [ "$which" = "32-bit" ]; then
		NO_AMD64="-type d -name amd64 -prune -o"
		rdfile="$rdfile32"
		rdmnt="$rdmnt32"
	elif [ "$which" = "64-bit" ]; then
		NO_AMD64=""
		rdfile="$rdfile64"
		rdmnt="$rdmnt64"
	else
		NO_AMD64=""
		rdfile="$rdfile32"
		rdmnt="$rdmnt32"
	fi

	newfs $lofidev < /dev/null 2> /dev/null
	mkdir "$rdmnt"
	mount -F mntfs mnttab /etc/mnttab > /dev/null 2>&1
	mount -o nologging $lofidev "$rdmnt"
	files=

	# do the actual copy
	cd "/$ALT_ROOT"

	for path in `find $filelist $NO_AMD64 -type f -print 2> /dev/null`
	do
		if [ "$which" = "both" ]; then
			files="$files $path"
		else
			filetype=`file $path 2>/dev/null |\
			    awk '/ELF/ { print \$3 }'`
			if [ -z "$filetype" ] || [ "$filetype" = "$which" ]
			then
				files="$files $path"
			fi
		fi
	done
	if [ $compress = yes ]; then
		ls $files | while read path
		do
			dir="${path%/*}"
			mkdir -p "$rdmnt/$dir"
			/usr/bin/gzip -c "$path" > "$rdmnt/$path"
		done
	else
		ls $files | cpio -pdum "$rdmnt" 2> /dev/null
	fi
	umount "$rdmnt"
	rmdir "$rdmnt"

	#
	# Check if gzip exists in /usr/bin, so we only try to run gzip
	# on systems that have gzip. Then run gzip out of the patch to
	# pick it up from bfubin or something like that if needed.
	#
	# If compress is set, the individual files in the archive are
	# compressed, and the final compression will accomplish very
	# little.  To save time, we skip the gzip in this case.
	#
	if [ $compress = no ] && [ -x /usr/bin/gzip ] ; then
		gzip -c "$rdfile" > "${archive}-new"
	else
		cat "$rdfile" > "${archive}-new"
	fi
}

#
# The first argument can be:
#
# "both" - create an archive with both 32-bit and 64-bit binaries
# "32-bit" - create an archive with only 32-bit binaries
# "64-bit" - create an archive with only 64-bit binaries
#
function create_isofs
{
	which=$1
	archive=$2

	# should we exclude amd64 binaries?
	if [ "$which" = "32-bit" ]; then
		NO_AMD64="-type d -name amd64 -prune -o"
		rdmnt="$rdmnt32"
		errlog="$errlog32"
	elif [ "$which" = "64-bit" ]; then
		NO_AMD64=""
		rdmnt="$rdmnt64"
		errlog="$errlog64"
	else
		NO_AMD64=""
		rdmnt="$rdmnt32"
		errlog="$errlog32"
	fi

	# create image directory seed with graft points
	mkdir "$rdmnt"
	files=
	isocmd="mkisofs -quiet -graft-points -dlrDJN -relaxed-filenames"

	cd "/$ALT_ROOT"
	for path in `find $filelist $NO_AMD64 -type f -print 2> /dev/null`
	do
		if [ "$which" = "both" ]; then
			files="$files $path"
		else
			filetype=`file $path 2>/dev/null |\
			    awk '/ELF/ { print \$3 }'`
			if [ -z "$filetype" ] || [ "$filetype" = "$which" ]
			then
				files="$files $path"
			fi
		fi
	done
	if [ $compress = yes ]; then
		ls $files | while read path
		do
			dir="${path%/*}"
			mkdir -p "$rdmnt/$dir"
			/usr/bin/gzip -c "$path" > "$rdmnt/$path"
		done
	else
		ls $files | cpio -pdum "$rdmnt" 2> /dev/null
	fi
	isocmd="$isocmd \"$rdmnt\""
	rm -f "$errlog"

	#
	# Check if gzip exists in /usr/bin, so we only try to run gzip
	# on systems that have gzip. Then run gzip out of the patch to
	# pick it up from bfubin or something like that if needed.
	#
	# If compress is set, the individual files in the archive are
	# compressed, and the final compression will accomplish very
	# little.  To save time, we skip the gzip in this case.
	#
	if [ $compress = no ] && [ -x /usr/bin/gzip ] ; then
		ksh -c "$isocmd" 2> "$errlog" | \
		    gzip > "${archive}-new"
	else
		ksh -c "$isocmd" 2> "$errlog" > "${archive}-new"
	fi

	if [ -s "$errlog" ]; then
		grep Error: "$errlog" >/dev/null 2>&1
		if [ $? -eq 0 ]; then
			grep Error: "$errlog"
			rm -f "${archive}-new"
		fi
	fi
	rm -f "$errlog"
}

function create_archive
{
	which=$1
	archive=$2
	lofidev=$3

	echo "updating $archive...this may take a minute"

	if [ "$format" = "ufs" ]; then
		create_ufs "$which" "$archive" "$lofidev"
	else
		create_isofs "$which" "$archive"
	fi

	# sanity check the archive before moving it into place
	#
	ARCHIVE_SIZE=`du -k "${archive}-new" | cut -f 1`
	if [ $compress = yes ]
	then
		#
		# 'file' will report "English text" for uncompressed
		# boot_archives.  Checking for that doesn't seem stable,
		# so we just check that the file exists.
		#
		ls "${archive}-new" >/dev/null 2>&1
	else
		#
		# the file type check also establishes that the
		# file exists at all
		#
		file "${archive}-new" | grep gzip > /dev/null
	fi

	if [ $? = 1 ] && [ -x /usr/bin/gzip ] || [ $ARCHIVE_SIZE -lt 5000 ]
	then
		#
		# Two of these functions may be run in parallel.  We
		# need to allow the other to clean up, so we can't
		# exit immediately.  Instead, we set a flag.
		#
		echo "update of $archive failed"
		ERROR=1
	else
		lockfs -f "/$ALT_ROOT" 2>/dev/null
		mv "${archive}-new" "$archive"
		lockfs -f "/$ALT_ROOT" 2>/dev/null
	fi

}

#
# get filelist
#
files=$(ls "$ALT_ROOT/boot/solaris/filelist.ramdisk" \
	"$ALT_ROOT/etc/boot/solaris/filelist.ramdisk" 2>/dev/null)
if [[ -z "$files" ]]
then
	print -u2 "Can't find filelist.ramdisk"
	exit 1
fi
filelist=$(sort -u $files)

scratch=tmp

if [ $format = ufs ] ; then
	# calculate image size
	getsize

	# We do two mkfile's of total_size, so double the space
	(( tmp_needed = total_size * 2 ))

	# check to see if there is sufficient space in tmpfs 
	#
	tmp_free=`df -b /tmp | tail -1 | awk '{ printf ($2) }'`
	(( tmp_free = tmp_free / 2 ))

	if [ $tmp_needed -gt $tmp_free  ] ; then
		# assumes we have enough scratch space on $ALT_ROOT
        	scratch="$ALT_ROOT"
	fi
fi

rddir="/$scratch/create_ramdisk.$$.tmp"
rdfile32="$rddir/rd.file.32"
rdfile64="$rddir/rd.file.64"
rdmnt32="$rddir/rd.mount.32"
rdmnt64="$rddir/rd.mount.64"
errlog32="$rddir/rd.errlog.32"
errlog64="$rddir/rd.errlog.64"
lofidev32=""
lofidev64=""

# make directory for temp files safely
rm -rf "$rddir"
mkdir "$rddir"

# Clean up upon exit.
trap 'cleanup' EXIT

if [ $SPLIT = yes ]; then
	#
	# We can't run lofiadm commands in parallel, so we have to do
	# them here.
	#
	if [ "$format" = "ufs" ]; then
		mkfile ${total_size}k "$rdfile32"
		lofidev32=`lofiadm -a "$rdfile32"`
		mkfile ${total_size}k "$rdfile64"
		lofidev64=`lofiadm -a "$rdfile64"`
	fi
	create_archive "32-bit" "$ALT_ROOT/$BOOT_ARCHIVE" $lofidev32 &
	create_archive "64-bit" "$ALT_ROOT/$BOOT_ARCHIVE_64" $lofidev64
	wait
	if [ "$format" = "ufs" ]; then
		lofiadm -d "$rdfile32"
		lofiadm -d "$rdfile64"
	fi
else
	if [ "$format" = "ufs" ]; then
		mkfile ${total_size}k "$rdfile32"
		lofidev32=`lofiadm -a "$rdfile32"`
	fi
	create_archive "both" "$ALT_ROOT/$BOOT_ARCHIVE" $lofidev32
	[ "$format" = "ufs" ] && lofiadm -d "$rdfile32"
fi
if [ $ERROR = 1 ]; then
	cleanup
	exit 1
fi

#
# For the diskless case, hardlink archive to /boot to make it
# visible via tftp. /boot is lofs mounted under /tftpboot/<hostname>.
# NOTE: this script must work on both client and server.
#
grep "[	 ]/[	 ]*nfs[	 ]" "$ALT_ROOT/etc/vfstab" > /dev/null
if [ $? = 0 ]; then
	rm -f "$ALT_ROOT/boot/boot_archive" "$ALT_ROOT/boot/amd64/boot_archive"
	ln "$ALT_ROOT/$BOOT_ARCHIVE" "$ALT_ROOT/boot/boot_archive"
	ln "$ALT_ROOT/$BOOT_ARCHIVE_64" "$ALT_ROOT/boot/amd64/boot_archive"
fi
rm -rf "$rddir"
