/*- * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Broadcom Inc. (LSI) MPT-Fusion Host Adapter FreeBSD */ ============================== Fusion-MPT MPI 2.0 / 2.5 Header File Change History ============================== Copyright 2000-2020 Broadcom Inc. All rights reserved. --------------------------------------- Header Set Release Version: 02.00.50 Header Set Release Date: 09-29-17 --------------------------------------- Filename Current version Prior version ---------- --------------- ------------- mpi2.h 02.00.50 02.00.49 mpi2_cnfg.h 02.00.42 02.00.41 mpi2_init.h 02.00.21 02.00.21 mpi2_ioc.h 02.00.34 02.00.33 mpi2_raid.h 02.00.11 02.00.11 mpi2_sas.h 02.00.10 02.00.10 mpi2_targ.h 02.00.09 02.00.09 mpi2_tool.h 02.00.14 02.00.13 mpi2_type.h 02.00.01 02.00.01 mpi2_ra.h 02.00.01 02.00.01 mpi2_hbd.h 02.00.04 02.00.04 mpi2_pci.h 02.00.02 02.00.02 mpi2_history.txt 02.00.46 02.00.45 * Date Version Description * -------- -------- ------------------------------------------------------ mpi2.h * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT. * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT. * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT. * Moved ReplyPostHostIndex register to offset 0x6C of the * MPI2_SYSTEM_INTERFACE_REGS and modified the define for * MPI2_REPLY_POST_HOST_INDEX_OFFSET. * Added union of request descriptors. * Added union of reply descriptors. * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT. * Added define for MPI2_VERSION_02_00. * Fixed the size of the FunctionDependent5 field in the * MPI2_DEFAULT_REPLY structure. * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT. * Removed the MPI-defined Fault Codes and extended the * product specific codes up to 0xEFFF. * Added a sixth key value for the WriteSequence register * and changed the flush value to 0x0. * Added message function codes for Diagnostic Buffer Post * and Diagnsotic Release. * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED * Moved MPI2_VERSION_UNION from mpi2_ioc.h. * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT. * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT. * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT. * Added #defines for marking a reply descriptor as unused. * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT. * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT. * Moved LUN field defines from mpi2_init.h. * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT. * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT. * In all request and reply descriptors, replaced VF_ID * field with MSIxIndex field. * Removed DevHandle field from * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those * bytes reserved. * Added RAID Accelerator functionality. * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT. * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT. * Added MSI-x index mask and shift for Reply Post Host * Index register. * Added function code for Host Based Discovery Action. * 02-10-10 02.00.15 Bumped MPI2_HEADER_VERSION_UNIT. * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL. * Added defines for product-specific range of message * function codes, 0xF0 to 0xFF. * 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT. * Added alternative defines for the SGE Direction bit. * 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT. * 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT. * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define. * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT. * Added MPI2_FUNCTION_SEND_HOST_MESSAGE. * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT. * 05-25-11 02.00.21 Bumped MPI2_HEADER_VERSION_UNIT. * 08-24-11 02.00.22 Bumped MPI2_HEADER_VERSION_UNIT. * 11-18-11 02.00.23 Bumped MPI2_HEADER_VERSION_UNIT. * Incorporating additions for MPI v2.5. * 02-06-12 02.00.24 Bumped MPI2_HEADER_VERSION_UNIT. * 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT. * Added Hard Reset delay timings. * 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT. * 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT. * 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT. * 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT. * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET. * 04-09-13 02.00.30 Bumped MPI2_HEADER_VERSION_UNIT. * 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT. * 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT. * 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT. * 01-08-14 02.00.34 Bumped MPI2_HEADER_VERSION_UNIT. * 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT. * 11-18-14 02.00.36 Updated copyright information. * Bumped MPI2_HEADER_VERSION_UNIT. * 03-16-15 02.00.37 Updated for MPI v2.6. * Bumped MPI2_HEADER_VERSION_UNIT. * Added Scratchpad registers and * AtomicRequestDescriptorPost register to * MPI2_SYSTEM_INTERFACE_REGS. * Added MPI2_DIAG_SBR_RELOAD. * Added MPI2_IOCSTATUS_INSUFFICIENT_POWER. * 03-19-15 02.00.38 Bumped MPI2_HEADER_VERSION_UNIT. * 05-25-15 02.00.39 Bumped MPI2_HEADER_VERSION_UNIT. * 08-25-15 02.00.40 Bumped MPI2_HEADER_VERSION_UNIT. * Added V7 HostDiagnostic register defines * 12-15-15 02.00.41 Bumped MPI_HEADER_VERSION_UNIT * 01-04-16 02.00.42 Bumped MPI_HEADER_VERSION_UNIT * 04-05-16 02.00.43 Modified MPI26_DIAG_BOOT_DEVICE_SELECT defines * to be unique within first 32 characters. * Removed AHCI support. * Removed SOP support. * Bumped MPI2_HEADER_VERSION_UNIT. * 04-10-16 02.00.44 Bumped MPI2_HEADER_VERSION_UNIT. * 07-06-16 02.00.45 Bumped MPI2_HEADER_VERSION_UNIT. * 09-02-16 02.00.46 Bumped MPI2_HEADER_VERSION_UNIT. * 11-23-16 02.00.47 Bumped MPI2_HEADER_VERSION_UNIT. * 02-03-17 02.00.48 Bumped MPI2_HEADER_VERSION_UNIT. * 06-13-17 02.00.49 Bumped MPI2_HEADER_VERSION_UNIT. * 09-29-17 02.00.50 Bumped MPI2_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- mpi2_cnfg.h * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. * Added Manufacturing Page 11. * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE * define. * 06-26-07 02.00.02 Adding generic structure for product-specific * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. * Rework of BIOS Page 2 configuration page. * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the * forms. * Added configuration pages IOC Page 8 and Driver * Persistent Mapping Page 0. * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, * RAID Physical Disk Pages 0 and 1, RAID Configuration * Page 0). * Added new value for AccessStatus field of SAS Device * Page 0 (_SATA_NEEDS_INITIALIZATION). * 10-31-07 02.00.04 Added missing SEPDevHandle field to * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for * NVDATA. * Modified IOC Page 7 to use masks and added field for * SASBroadcastPrimitiveMasks. * Added MPI2_CONFIG_PAGE_BIOS_4. * Added MPI2_CONFIG_PAGE_LOG_0. * 02-29-08 02.00.06 Modified various names to make them 32-character unique. * Added SAS Device IDs. * Updated Integrated RAID configuration pages including * Manufacturing Page 4, IOC Page 6, and RAID Configuration * Page 0. * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. * Added missing MaxNumRoutedSasAddresses field to * MPI2_CONFIG_PAGE_EXPANDER_0. * Added SAS Port Page 0. * Modified structure layout for * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF * to 0x000000FF. * Added two new values for the Physical Disk Coercion Size * bits in the Flags field of Manufacturing Page 4. * Added product-specific Manufacturing pages 16 to 31. * Modified Flags bits for controlling write cache on SATA * drives in IO Unit Page 1. * Added new bit to AdditionalControlFlags of SAS IO Unit * Page 1 to control Invalid Topology Correction. * Added SupportedPhysDisks field to RAID Volume Page 1 and * added related defines. * Added additional defines for RAID Volume Page 0 * VolumeStatusFlags field. * Modified meaning of RAID Volume Page 0 VolumeSettings * define for auto-configure of hot-swap drives. * Added PhysDiskAttributes field (and related defines) to * RAID Physical Disk Page 0. * Added MPI2_SAS_PHYINFO_PHY_VACANT define. * Added three new DiscoveryStatus bits for SAS IO Unit * Page 0 and SAS Expander Page 0. * Removed multiplexing information from SAS IO Unit pages. * Added BootDeviceWaitTime field to SAS IO Unit Page 4. * Removed Zone Address Resolved bit from PhyInfo and from * Expander Page 0 Flags field. * Added two new AccessStatus values to SAS Device Page 0 * for indicating routing problems. Added 3 reserved words * to this page. * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. * Inserted missing reserved field into structure for IOC * Page 6. * Added more pending task bits to RAID Volume Page 0 * VolumeStatusFlags defines. * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 * and SAS Expander Page 0 to flag a downstream initiator * when in simplified routing mode. * Removed SATA Init Failure defines for DiscoveryStatus * fields of SAS IO Unit Page 0 and SAS Expander Page 0. * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. * Added PortGroups, DmaGroup, and ControlGroup fields to * SAS Device Page 0. * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO * Unit Page 6. * Added expander reduced functionality data to SAS * Expander Page 0. * Added SAS PHY Page 2 and SAS PHY Page 3. * 07-30-09 02.00.12 Added IO Unit Page 7. * Added new device ids. * Added SAS IO Unit Page 5. * Added partial and slumber power management capable flags * to SAS Device Page 0 Flags field. * Added PhyInfo defines for power condition. * Added Ethernet configuration pages. * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY. * Added SAS PHY Page 4 structure and defines. * 02-10-10 02.00.14 Modified the comments for the configuration page * structures that contain an array of data. The host * should use the "count" field in the page data (e.g. the * NumPhys field) to determine the number of valid elements * in the array. * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines. * Added PowerManagementCapabilities to IO Unit Page 7. * Added PortWidthModGroup field to * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS. * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines. * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines. * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines. * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT * define. * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define. * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define. * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing) * defines. * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for * the Pinout field. * Added BoardTemperature and BoardTemperatureUnits fields * to MPI2_CONFIG_PAGE_IO_UNIT_7. * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure. * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST. * Added IO Unit Page 8, IO Unit Page 9, * and IO Unit Page 10. * Added SASNotifyPrimitiveMasks field to * MPI2_CONFIG_PAGE_IOC_7. * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec). * 05-25-11 02.00.20 Cleaned up a few comments. * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities * for PCIe link as obsolete. * Added SpinupFlags field containing a Disable Spin-up bit * to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO * Unit Page 4. * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT. * Added UEFIVersion field to BIOS Page 1 and defined new * BiosOptions bits. * Incorporating additions for MPI v2.5. * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER. * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID. * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as * obsolete for MPI v2.5 and later. * Added some defines for 12G SAS speeds. * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK. * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to * match the specification. * 08-19-13 02.00.26 Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for * future use. * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for * MPI2_CONFIG_PAGE_MAN_7. * Added EnclosureLevel and ConnectorName fields to * MPI2_CONFIG_PAGE_SAS_DEV_0. * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for * MPI2_CONFIG_PAGE_SAS_DEV_0. * Added EnclosureLevel field to * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. * 01-08-14 02.00.28 Added more defines for the BiosOptions field of * MPI2_CONFIG_PAGE_BIOS_1. * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and * more defines for the BiosOptions field.. * 11-18-14 02.00.30 Updated copyright information. * Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG. * Added AdapterOrderAux fields to BIOS Page 3. * 03-16-15 02.00.31 Updated for MPI v2.6. * Added BoardPowerRequirement, PCISlotPowerAllocation, and * Flags field to IO Unit Page 7. * Added IO Unit Page 11. * Added new SAS Phy Event codes * Added PCIe configuration pages. * 03-19-15 02.00.32 Fixed PCIe Link Config page structure names to be * unique in first 32 characters. * 05-25-15 02.00.33 Added more defines for the BiosOptions field of * MPI2_CONFIG_PAGE_BIOS_1. * 08-25-15 02.00.34 Added PCIe Device Page 2 SGL format capability. * 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4. * 01-21-16 02.00.36 Added/modified MPI2_MFGPAGE_DEVID_SAS defines. * Added Link field to PCIe Link Pages * Added EnclosureLevel and ConnectorName to PCIe * Device Page 0. * Added define for PCIE IoUnit page 1 max rate shift. * Added comment for reserved ExtPageTypes. * Added SAS 4 22.5 gbs speed support. * Added PCIe 4 16.0 GT/sec speec support. * Removed AHCI support. * Removed SOP support. * Added NegotiatedLinkRate and NegotiatedPortWidth to * PCIe device page 0. * 04-10-16 02.00.37 Fixed MPI2_MFGPAGE_DEVID_SAS3616/3708 defines * 07-01-16 02.00.38 Added Manufacturing page 7 Connector types. * Changed declaration of ConnectorName in PCIe DevicePage0 * to match SAS DevicePage 0. * Added SATADeviceWaitTime to IO Unit Page 11. * Added MPI26_MFGPAGE_DEVID_SAS4008 * Added x16 PCIe width to IO Unit Page 7 * Added LINKFLAGS to control SRIS in PCIe IO Unit page 1 * phy data. * Added InitStatus to PCIe IO Unit Page 1 header. * 09-01-16 02.00.39 Added MPI26_CONFIG_PAGE_ENCLOSURE_0 and related defines. * Added MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE and * MPI26_ENCLOS_PGAD_FORM_HANDLE page address formats. * 02-02-17 02.00.40 Added MPI2_MANPAGE7_SLOT_UNKNOWN. * Added ChassisSlot field to SAS Enclosure Page 0. * Added ChassisSlot Valid bit (bit 5) to the Flags field * in SAS Enclosure Page 0. * 06-13-17 02.00.41 Added MPI26_MFGPAGE_DEVID_SAS3816 and * MPI26_MFGPAGE_DEVID_SAS3916 defines. * Removed MPI26_MFGPAGE_DEVID_SAS4008 define. * Added MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN define. * Renamed MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS to * MPI26_PCIEIOUNIT1_LINKFLAGS_SRIS_EN. * Renamed MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS to * MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SEPARATE_REFCLK. * 09-29-17 02.00.42 Added ControllerResetTO field to PCIe Device Page 2. * Added NOIOB field to PCIe Device Page 2. * Added MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN to * the Capabilities field of PCIe Device Page 2. * -------------------------------------------------------------------------- mpi2_init.h * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO * Control field Task Attribute flags. * Moved LUN field defines to mpi2.h becasue they are * common to many structures. * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to * Query Asynchronous Event. * Defined two new bits in the SlotStatus field of the SCSI * Enclosure Processor Request and Reply. * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for * both SCSI IO Error Reply and SCSI Task Management Reply. * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY. * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it. * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request. * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define. * 11-18-11 02.00.12 Incorporating additions for MPI v2.5. * 02-06-12 02.00.13 Added alternate defines for Task Priority / Command * Priority to match SAM-4. * Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY. * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION. * 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY, * replacing the Reserved4 field. * 11-18-14 02.00.16 Updated copyright information. * 03-16-15 02.00.17 Updated for MPI v2.6. * Added MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH. * Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and * MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF. * 08-26-15 02.00.18 Added SCSITASKMGMT_MSGFLAGS for Target Reset. * 12-18-15 02.00.19 Added EEDPObservedValue added to SCSI IO Reply message. * 01-04-16 02.00.20 Modified EEDP reported values in SCSI IO Reply message. * 01-21-16 02.00.21 Modified MPI26_SCSITASKMGMT_MSGFLAGS_PCIE* defines to * be unique within first 32 characters. * -------------------------------------------------------------------------- mpi2_ioc.h * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to * MaxTargets. * Added TotalImageSize field to FWDownload Request. * Added reserved words to FWUpload Request. * 06-26-07 02.00.02 Added IR Configuration Change List Event. * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit * request and replaced it with * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. * Replaced the MinReplyQueueDepth field of the IOCFacts * reply with MaxReplyDescriptorPostQueueDepth. * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum * depth for the Reply Descriptor Post Queue. * Added SASAddress field to Initiator Device Table * Overflow Event data. * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING * for SAS Initiator Device Status Change Event data. * Modified Reason Code defines for SAS Topology Change * List Event data, including adding a bit for PHY Vacant * status, and adding a mask for the Reason Code. * Added define for * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of * the IOCFacts Reply. * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. * Moved MPI2_VERSION_UNION to mpi2.h. * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks * instead of enables, and added SASBroadcastPrimitiveMasks * field. * Added Log Entry Added Event and related structure. * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. * Added MaxVolumes and MaxPersistentEntries fields to * IOCFacts reply. * Added ProtocalFlags and IOCCapabilities fields to * MPI2_FW_IMAGE_HEADER. * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to * a U16 (from a U32). * Removed extra 's' from EventMasks name. * 06-27-08 02.00.08 Fixed an offset in a comment. * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and * renamed MinReplyFrameSize to ReplyFrameSize. * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. * Added two new RAIDOperation values for Integrated RAID * Operations Status Event data. * Added four new IR Configuration Change List Event data * ReasonCode values. * Added two new ReasonCode defines for SAS Device Status * Change Event data. * Added three new DiscoveryStatus bits for the SAS * Discovery event data. * Added Multiplexing Status Change bit to the PhyStatus * field of the SAS Topology Change List event data. * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. * BootFlags are now product-specific. * Added defines for the indivdual signature bytes * for MPI2_INIT_IMAGE_FOOTER. * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR * define. * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE * define. * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. * Added two new reason codes for SAS Device Status Change * Event. * Added new event: SAS PHY Counter. * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. * Added new product id family for 2208. * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. * Added Host Based Discovery Phy Event data. * Added defines for ProductID Product field * (MPI2_FW_HEADER_PID_). * Modified values for SAS ProductID Family * (MPI2_FW_HEADER_PID_FAMILY_). * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. * Added PowerManagementControl Request structures and * defines. * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added * SASNotifyPrimitiveMasks field to * MPI2_EVENT_NOTIFICATION_REQUEST. * Added Temperature Threshold Event. * Added Host Message Event. * Added Send Host Message request and reply. * 05-25-11 02.00.18 For Extended Image Header, added * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines. * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define. * 08-24-11 02.00.19 Added PhysicalPort field to * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure. * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. * 11-18-11 02.00.20 Incorporating additions for MPI v2.5. * 03-29-12 02.00.21 Added a product specific range to event values. * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE. * Added ElapsedSeconds field to * MPI2_EVENT_DATA_IR_OPERATION_STATUS. * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY. * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE. * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. * Added Encrypted Hash Extended Image. * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. * 11-18-14 02.00.25 Updated copyright information. * 03-16-15 02.00.26 Updated for MPI v2.6. * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT. * Added MPI2_EVENT_PCIE_LINK_COUNTER and * MPI26_EVENT_DATA_PCIE_LINK_COUNTER. * Added MPI26_CTRL_OP_SHUTDOWN. * Added MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and * MPI26_FW_HEADER_PID_FAMILY_3516_SAS. * 08-25-15 02.00.27 Added IC ARCH Class based signature defines. * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event. * Added ConigurationFlags field to IOCInit message to * support NVMe SGL format control. * Added PCIe SRIOV support. * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support. * Added PCIe 4 16.0 GT/sec speec support. * Removed AHCI support. * Removed SOP support. * 07-01-16 02.00.29 Added Archclass for 4008 product. * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED. * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload * Request Message. * Added new defines for the ImageType field of FWUpload * Request Message. * Added new values for the RegionType field in the Layout * Data sections of the FLASH Layout Extended Image Data. * Added new defines for the ReasonCode field of * Active Cable Exception Event. * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and * MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE. * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and * MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR. * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP. * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related * defines for the ReasonCode field. * 06-13-17 02.00.33 Added MPI2_FW_DOWNLOAD_ITYPE_CPLD. * 09-29-17 02.00.34 Added MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED * to the ReasonCode field in PCIe Device Status Change * Event Data. * -------------------------------------------------------------------------- mpi2_raid.h * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. * 08-31-07 02.00.01 Modifications to RAID Action request and reply, * including the Actions and ActionData. * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD. * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT * can be sized by the build environment. * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of * VolumeCreationFlags and marked the old one as obsolete. * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define. * 08-24-10 02.00.06 Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with * related structures and defines. * Added product-specific range to RAID Action values. * 11-18-11 02.00.07 Incorporating additions for MPI v2.5. * 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN. * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR. * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define. * 04-17-13 02.00.10 Added MPI25_RAID_ACTION_ADATA_ALLOW_PI. * -------------------------------------------------------------------------- mpi2_sas.h * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit * Control Request. * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control * Request. * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST * to MPI2_SGE_IO_UNION since it supports chained SGLs. * 05-12-10 02.00.04 Modified some comments. * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control. * 11-18-11 02.00.06 Incorporating additions for MPI v2.5. * 07-10-12 02.00.07 Added MPI2_SATA_PT_SGE_UNION for use in the SATA * Passthrough Request message. * 08-19-13 02.00.08 Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete * for anything newer than MPI v2.0. * 11-18-14 02.00.09 Updated copyright information. * 03-16-15 02.00.10 Updated for MPI v2.6. * Added MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA. * -------------------------------------------------------------------------- mpi2_targ.h * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. * 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to * BufferPostFlags field of CommandBufferPostBase Request. * 02-29-08 02.00.02 Modified various names to make them 32-character unique. * 10-02-08 02.00.03 Removed NextCmdBufferOffset from * MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST. * Target Status Send Request only takes a single SGE for * response data. * 02-10-10 02.00.04 Added comment to MPI2_TARGET_SSP_RSP_IU structure. * 11-18-11 02.00.05 Incorporating additions for MPI v2.5. * 11-27-12 02.00.06 Added InitiatorDevHandle field to MPI2_TARGET_MODE_ABORT * request message structure. * Added AbortType MPI2_TARGET_MODE_ABORT_DEVHANDLE and * MPI2_TARGET_MODE_ABORT_ALL_COMMANDS. * 06-13-14 02.00.07 Added MinMSIxIndex and MaxMSIxIndex fields to * MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST. * 11-18-14 02.00.08 Updated copyright information. * 03-16-15 02.00.09 Updated for MPI v2.6. * Added MPI26_TARGET_ASSIST_IOFLAGS_ESCAPE_PASSTHROUGH. * -------------------------------------------------------------------------- mpi2_tool.h * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release * structures and defines. * 02-29-08 02.00.02 Modified various names to make them 32-character unique. * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool. * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request * and reply messages. * Added MPI2_DIAG_BUF_TYPE_EXTENDED. * Incremented MPI2_DIAG_BUF_TYPE_COUNT. * 05-12-10 02.00.05 Added Diagnostic Data Upload tool. * 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer * Post Request. * 05-25-11 02.00.07 Added Flags field and related defines to * MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST. * 11-18-11 02.00.08 Incorporating additions for MPI v2.5. * 07-10-12 02.00.09 Add MPI v2.5 Toolbox Diagnostic CLI Tool Request * message. * 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that * it uses MPI Chain SGE as well as MPI Simple SGE. * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info. * 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC. * 11-18-14 02.00.13 Updated copyright information. * 08-25-16 02.00.14 Added new values for the Flags field of Toolbox Clean * Tool Request Message. * -------------------------------------------------------------------------- mpi2_type.h * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. * 11-18-14 02.00.01 Updated copyright information. * -------------------------------------------------------------------------- mpi2_ra.h * 05-06-09 02.00.00 Initial version. * 11-18-14 02.00.01 Updated copyright information. * -------------------------------------------------------------------------- mpi2_hbd.h * 10-28-09 02.00.00 Initial version. * 08-11-10 02.00.01 Removed PortGroups, DmaGroup, and ControlGroup from * HBD Action request, replaced by AdditionalInfo field. * 11-18-11 02.00.02 Incorporating additions for MPI v2.5. * 11-18-14 02.00.03 Updated copyright information. * 02-17-16 02.00.04 Added SAS 4 22.5 gbs speed support. * -------------------------------------------------------------------------- mpi2_pci.h * 03-16-15 02.00.00 Initial version. * 02-17-16 02.00.01 Removed AHCI support. * Removed SOP support. * 07-01-16 02.00.02 Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to * NVME Encapsulated Request. * -------------------------------------------------------------------------- mpi2_history.txt Parts list history Filename 02.00.50 02.00.49 02.00.48 ---------- -------- -------- -------- mpi2.h 02.00.50 02.00.49 02.00.48 mpi2_cnfg.h 02.00.42 02.00.41 02.00.40 mpi2_init.h 02.00.21 02.00.21 02.00.21 mpi2_ioc.h 02.00.34 02.00.33 02.00.32 mpi2_raid.h 02.00.11 02.00.11 02.00.11 mpi2_sas.h 02.00.10 02.00.10 02.00.10 mpi2_targ.h 02.00.09 02.00.09 02.00.09 mpi2_tool.h 02.00.14 02.00.14 02.00.14 mpi2_type.h 02.00.01 02.00.01 02.00.01 mpi2_ra.h 02.00.01 02.00.01 02.00.01 mpi2_hbd.h 02.00.04 02.00.04 02.00.04 mpi2_pci.h 02.00.02 02.00.02 02.00.02 Filename 02.00.47 02.00.46 02.00.45 02.00.44 02.00.43 02.00.42 ---------- -------- -------- -------- -------- -------- -------- mpi2.h 02.00.47 02.00.46 02.00.45 02.00.44 02.00.43 02.00.42 mpi2_cnfg.h 02.00.39 02.00.39 02.00.38 02.00.37 02.00.36 02.00.35 mpi2_init.h 02.00.21 02.00.21 02.00.21 02.00.21 02.00.21 02.00.20 mpi2_ioc.h 02.00.31 02.00.30 02.00.29 02.00.28 02.00.28 02.00.27 mpi2_raid.h 02.00.11 02.00.11 02.00.11 02.00.11 02.00.11 02.00.11 mpi2_sas.h 02.00.10 02.00.10 02.00.10 02.00.10 02.00.10 02.00.10 mpi2_targ.h 02.00.09 02.00.09 02.00.09 02.00.09 02.00.09 02.00.09 mpi2_tool.h 02.00.14 02.00.14 02.00.13 02.00.13 02.00.13 02.00.13 mpi2_type.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 mpi2_ra.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 mpi2_hbd.h 02.00.04 02.00.04 02.00.04 02.00.04 02.00.04 02.00.03 mpi2_pci.h 02.00.02 02.00.02 02.00.02 02.00.01 02.00.01 02.00.00 Filename 02.00.41 02.00.40 02.00.39 02.00.38 02.00.37 02.00.36 ---------- -------- -------- -------- -------- -------- -------- mpi2.h 02.00.41 02.00.40 02.00.39 02.00.38 02.00.37 02.00.36 mpi2_cnfg.h 02.00.35 02.00.34 02.00.33 02.00.32 02.00.31 02.00.30 mpi2_init.h 02.00.19 02.00.18 02.00.17 02.00.17 02.00.17 02.00.16 mpi2_ioc.h 02.00.27 02.00.27 02.00.26 02.00.26 02.00.26 02.00.25 mpi2_raid.h 02.00.11 02.00.11 02.00.11 02.00.11 02.00.11 02.00.11 mpi2_sas.h 02.00.10 02.00.10 02.00.10 02.00.10 02.00.10 02.00.09 mpi2_targ.h 02.00.09 02.00.09 02.00.09 02.00.09 02.00.09 02.00.08 mpi2_tool.h 02.00.13 02.00.13 02.00.13 02.00.13 02.00.13 02.00.13 mpi2_type.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 mpi2_ra.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 mpi2_hbd.h 02.00.03 02.00.03 02.00.03 02.00.03 02.00.03 02.00.03 mpi2_pci.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 Filename 02.00.35 02.00.34 02.00.33 02.00.32 02.00.31 02.00.30 ---------- -------- -------- -------- -------- -------- -------- mpi2.h 02.00.35 02.00.34 02.00.33 02.00.32 02.00.31 02.00.30 mpi2_cnfg.h 02.00.29 02.00.28 02.00.27 02.00.26 02.00.25 02.00.25 mpi2_init.h 02.00.15 02.00.15 02.00.15 02.00.15 02.00.15 02.00.15 mpi2_ioc.h 02.00.24 02.00.24 02.00.24 02.00.23 02.00.22 02.00.22 mpi2_raid.h 02.00.10 02.00.10 02.00.10 02.00.10 02.00.10 02.00.09 mpi2_sas.h 02.00.08 02.00.08 02.00.08 02.00.08 02.00.07 02.00.07 mpi2_targ.h 02.00.07 02.00.06 02.00.06 02.00.06 02.00.06 02.00.06 mpi2_tool.h 02.00.12 02.00.12 02.00.11 02.00.11 02.00.10 02.00.10 mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 mpi2_ra.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 mpi2_hbd.h 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 Filename 02.00.29 02.00.28 02.00.27 02.00.26 02.00.25 02.00.24 ---------- -------- -------- -------- -------- -------- -------- mpi2.h 02.00.29 02.00.28 02.00.27 02.00.26 02.00.25 02.00.24 mpi2_cnfg.h 02.00.24 02.00.23 02.00.22 02.00.22 02.00.22 02.00.22 mpi2_init.h 02.00.14 02.00.14 02.00.14 02.00.14 02.00.13 02.00.13 mpi2_ioc.h 02.00.22 02.00.22 02.00.22 02.00.21 02.00.21 02.00.20 mpi2_raid.h 02.00.09 02.00.09 02.00.09 02.00.08 02.00.08 02.00.08 mpi2_sas.h 02.00.07 02.00.07 02.00.07 02.00.07 02.00.06 02.00.06 mpi2_targ.h 02.00.06 02.00.06 02.00.05 02.00.05 02.00.05 02.00.05 mpi2_tool.h 02.00.10 02.00.10 02.00.10 02.00.09 02.00.08 02.00.08 mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 mpi2_ra.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 mpi2_hbd.h 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 Filename 02.00.23 02.00.22 02.00.21 02.00.20 02.00.19 02.00.18 ---------- -------- -------- -------- -------- -------- -------- mpi2.h 02.00.23 02.00.22 02.00.21 02.00.20 02.00.19 02.00.18 mpi2_cnfg.h 02.00.22 02.00.21 02.00.20 02.00.19 02.00.18 02.00.17 mpi2_init.h 02.00.12 02.00.11 02.00.11 02.00.11 02.00.11 02.00.11 mpi2_ioc.h 02.00.20 02.00.19 02.00.18 02.00.17 02.00.17 02.00.16 mpi2_raid.h 02.00.07 02.00.06 02.00.05 02.00.05 02.00.05 02.00.05 mpi2_sas.h 02.00.06 02.00.05 02.00.05 02.00.05 02.00.05 02.00.05 mpi2_targ.h 02.00.05 02.00.04 02.00.04 02.00.04 02.00.04 02.00.04 mpi2_tool.h 02.00.08 02.00.07 02.00.07 02.00.06 02.00.06 02.00.06 mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 mpi2_ra.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 mpi2_hbd.h 02.00.02 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 Filename 02.00.17 02.00.16 02.00.15 02.00.14 02.00.13 02.00.12 ---------- -------- -------- -------- -------- -------- -------- mpi2.h 02.00.17 02.00.16 02.00.15 02.00.14 02.00.13 02.00.12 mpi2_cnfg.h 02.00.16 02.00.15 02.00.14 02.00.13 02.00.12 02.00.11 mpi2_init.h 02.00.10 02.00.10 02.00.09 02.00.08 02.00.07 02.00.07 mpi2_ioc.h 02.00.15 02.00.15 02.00.14 02.00.13 02.00.12 02.00.11 mpi2_raid.h 02.00.05 02.00.05 02.00.04 02.00.04 02.00.04 02.00.03 mpi2_sas.h 02.00.05 02.00.04 02.00.03 02.00.03 02.00.02 02.00.02 mpi2_targ.h 02.00.04 02.00.04 02.00.04 02.00.03 02.00.03 02.00.03 mpi2_tool.h 02.00.06 02.00.05 02.00.04 02.00.04 02.00.04 02.00.03 mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 mpi2_ra.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 mpi2_hbd.h 02.00.01 02.00.00 02.00.00 02.00.00 Filename 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 ---------- -------- -------- -------- -------- -------- -------- mpi2.h 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 mpi2_cnfg.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 02.00.06 mpi2_init.h 02.00.06 02.00.06 02.00.05 02.00.05 02.00.04 02.00.03 mpi2_ioc.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.07 02.00.06 mpi2_raid.h 02.00.03 02.00.03 02.00.03 02.00.03 02.00.02 02.00.02 mpi2_sas.h 02.00.02 02.00.02 02.00.01 02.00.01 02.00.01 02.00.01 mpi2_targ.h 02.00.03 02.00.03 02.00.02 02.00.02 02.00.02 02.00.02 mpi2_tool.h 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 Filename 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 ---------- -------- -------- -------- -------- -------- -------- mpi2.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 mpi2_cnfg.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 mpi2_init.h 02.00.02 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 mpi2_ioc.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 mpi2_raid.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00 mpi2_sas.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 mpi2_targ.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00 mpi2_tool.h 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00